Cesium sorption on mylonite

As part of the laboratory support program for the field migration experiment at the Grimsel Test Site (GTS) in the Swiss Alps, the sorption behaviour of cesium on Grimsel mylonite was studied. Batch sorption experiments were carried out in N₂ atmosphere (<3 ppm O₂). The adsorption isotherms were reversible and non-linear for cesium concentrations of between 3.2·10^–8 and 5.0·10^–4M. Two different sites appear to be involved in sorption depending on whether Cs loading was high (10^–6–10^–3 meq/g) or low (10^–7–10^–6 meq/g). At low Cs loadings adsorption was considered to occur mainly at the crystal edges of mica particles. Selectivity coefficients for exchange between cesium and potassium were calculated for different Cs loadings. It was suggestd that by varying the potassium concentration of the solution and by making some assumptions, a K_d value for cesium at the migration site could be estimated. Data were fitted to both Freundlich and Dubinin-Radushkevich isotherms. The empirical Freundlich parameters enabled a site distribution function to be calculated and a mean energy of sorption of about 12 kJ/mol was found using Dubinin-Radushkevich isotherms approach.     

Anaerobic and aerobic sorption of cesium and selenium on mudrock

This study is focused on sorption and determination of distribution ratios (R _d) of cesium and selenium on mudrock, which is the potential host rock for waste disposal in Taiwan. Batch tests including sorption kinetic and isotherms tests have been performed in synthetic groundwater at aerobic and anaerobic conditions which might be found in the deep geologic environment. It is found that R _d for sorption of cesium did not have an obvious difference in both conditions with various contact time. However, R _d in anaerobic condition for sorption of selenium was greater than that in aerobic condition. Selenium is a redox sensitive element and its solubility in reducing conditions is controlled by the formation of metallic or precipitable selenium. It demonstrated variation of R _d with time in both conditions for Se sorption kinetic experiments was equal (10 ml/g) and indicated a part formation (10%) of precipitable selenium (Se⁰, FeSe or FeSe₂) in the solution. Moreover, it was not enough to form precipitable selenium completely in reducing condition as to insufficient experimental period (2 weeks) and in the presence of Fe²⁺. The Freundlich and Langmuir isotherm for the concentration ranges (i.e., 10⁻³–10⁻⁷M) conducted in both conditions seem to be adequate to quantitatively describe the sorption of cesium and selenium, respectively.     

Sorption of hafnium on hydrous titanium oxide using radiotracer technique

The sorption of hafnium on hydrous titanium oxide (TiO₂·1.94 H₂O) has been studied in detail. Maximum sorption of hafnium can be achieved from a pH 7 buffer solution containing boric acid and sodium hydroxide using 50 mg of the oxide after 30 minutes shaking. The value ofk _d, the rate constant of intraparticle transport for hafnium sorption, from 0.01M hydrochloric and perchloric acid and pH 7 buffer solutions has been found to be 17 mmole·g^–1·min^–2. The kinetics of hafnium sorption follows Lagergren equation in 0.01M HCl solution only. The values of the overall rate constantK=6.33·10^–2 min^–1 and of the rate constant for sorptionk ₁=6.32·10^–2 min^–1 and desorptionk ₂=2.28·10^–5 min^–1 have been evaluated using linear regression analysis. The value of correlation factor() is 0.9824. The influence of hafnium concentration on its sorption has been examined from 4.55·10^–5 to 9.01·10^–4 M from pH 7 buffer solution. The sorption data followed only the Langmuir sorption isotherm. The saturation capacity of 9.52 mmole·g^–1 and of a constant related to sorption energy have been estimated to be 2917 dm³·mole^–1. Among all the additional anions and cations tested only citrate ions reduce the sorption significantly. Under optimal experimental conditions selected for hafnium sorption, As(III), Sn(V), Co(II), Se(IV) and Eu(III) have shown higher sorption whereas Mn(II), Ag(I) and Sc(III) are sorbed to a lesser extent. It can be concluded that a titanium oxide bed can be used for the preconcentration and removal of hafnium and other metal ions showing higher sorption from their very dilute solutions. The oxide can also be employed for the decontamination of radioactive liquid waste and for pollution abatement studies.     

Kinetics and mechanism of ligand substitution of mono(polyamine)-nickel(II) complexes with 4-(2-pyridylazo)resorcinol

Summary The kinetics and mechanism of ligand substitution reactions of tetraethylenepentamine nickel(II), Ni (Teren), and triethylenetetraamine nickel(II), Ni(Trien), with 4-(2-pyridylazo)resorcinol (parH₂) have been studied spectrophotometrically at I=0.1 M (NaClO₄) at 25°C. In both systems two distinct reaction steps are observed. The rapid first step follows the rate law d[Ni(Polyamine)(ParH₂)]/dt=k₁ [Ni(Polyamine)] [ParH₂]. The formation of ternary complexes of Ni (Polyamine) with ParH₂ has been investigated under second order equal concentration conditions. The values of second order rate constants for the Trien and Teren reactions are (2.1±0.2)×10⁴ M^–1s^–1 and (7.8±0.6)×10³ M^–1s^–1 respectively at pH=9.0, I=0.1 M and 25°C.The rate law for the second step may be written as d[Ni(Par)₂]/dt=k₂[Ni(Polyamine)(ParH₂)]. Values of k₂ for the Trien and Teren systems are (2.5±0.1)×10^–4 s^–1 and (4.76±0.3)×10^–5 s^–1 respectively.     

Sorption of cesium on montmorillonite and effects of salt concentration

The sorption behavior of cesium on montmorillonite type clay was studied by using radioactivity measurements. Concentrations of Cs⁺ ions ranged from 10^–6 to 10^–2M. Cesium retention reduced with increasing salt concentration which was varied between 10^–4 and 10^–1M. Selectivity coefficients K_Cs–Na for the exchange between Cs and Na were calculated for different equivalent fractions of Cs on the solid phase. Using theK _Cs–Na values, free energy change was found to be 7.8 kJ/mol. The data could be fitted to a Freundlich isotherm, and empirical Freundlich parameters enabled the generation of a site distribution function. By fitting the data to the Dubinin-Radushkevich (D-R) isotherm, a mean energy of sorption of 8.6 kJ/mole was calculated which corresponds to the energy of ion exchange reactions. The values of energy changes calculated by using two different methods were in good agreement.     

Intermediate molybdenum oxides involved in binary and ternary induced electrodeposition

The first stages of Co–Ni and Co–Ni–Mo deposition in sulphate–citrate medium at pH 4.0 were analysed. In both cases, the formation of non-hydrogenated nickel on the electrode before alloy deposition was detected by linear sweep voltammetry and inductively coupled plasma mass spectrometry. Co–Ni electrodeposition was anomalous since the Co/Ni ratio in the alloy was higher than the corresponding [Co(II)]/[Ni(II)] ratio in solution. The adsorption of Co(II) over the initial nickel could explain the anomalous codeposition, which persisted with the addition of molybdate to the Co–Ni bath. However, the formation of intermediate molybdenum oxides also took place. A mechanism has been proposed to describe the sequence of steps for Co–Ni–Mo electrodeposition. Under our conditions, the alloy is formed mainly from free Co²⁺ and Ni²⁺ cations, whereas molybdate is reduced firstly to molybdenum oxide from MoO₄(H₃Cit)²⁻ and, secondly, NiCit⁻ catalyses the subsequent reduction to molybdenum metal of the intermediate [MoO₂–NiCit⁻]_ads species.     

Sorption of microamounts of Hf-and Ta-nuclides on DOWEX 50×8 and DOWEX 1×8 from HCl/HF containing aqueous solutions

The sorption behavior of microamounts of Hf and Ta on DOWEX 50×8 and DOWEX 1×8 from aqueous HCl/HF solutions has been investigated. Suitable separation conditions for these two elements on cation exchange resins were found in solutions containing 1.5M HCl/10^–4M HF and 0.05M HCl/10^–3M HF. Kinetic experiments showed that the system can be applied in high speed on-line separations.This work was supported by Bundesministerium für Forschung und Technologie.     

Sorption of radioactive strontium on a silica-titania mixed hydrous oxide gel

A silica-titania (Si–Ti) mixed hydroxide gel with Ti to Si mole ratio of 11 was prepared. Studies on the sorption of radiostrontium from alkaline solutions having various concentrations of sodium were carried out with Si–Ti. The distribution coefficient (K _d) of strontium decreased with increasing concentrations of sodium from 0.1 to 4.0 mol·dm^–3. The plot of logK _d versus log [Na⁺] gave a slope of –0.55 as against the theoretical value of –2.0. This suggests that some other paths in addition to the simple stoichiometric ion exchange is also existing for sorption. From pH titrations the pH_pzc of Si–Ti was found to be 4.22 coinciding nearly with the pH sorption edge. An attempt was made to correlate the sorption results with the surface characteristics of the sorbent. It was found that sorption is favored when the surface of the sorbent transforms into an anionic form. Sharp increase in the sorption of strontium was observed when the equilibrium pH was between 7 and 10. This behavior could be attributed to the abrupt increase in net negative charge on the surface of the sorbent.     

Selective Sorption–Spectrometric Determination of Nanogram Amounts of Vanadium(IV) and Vanadium(V)

Conditions of the selective sorption–spectrometric determination of vanadium(IV) and vanadium(V) using sulfonitrophenol M were found. The determination of vanadium (visual test (RSD = 30%) using a reference color scale or quantitative determination (RSD < 10%) by diffuse reflectance spectra is performed immediately after the dynamic-mode sorption of its colored complexes with sulfonitrophenol M at pH 3.5 (vanadium(IV)) or with sulfonitrophenol M and hydroxylamine at pH 1.5 (vanadium(V), 650 nm) at the surface of polyamide membrane disks (d= 1 cm, l= 0.1 mm, m= 2.7 mg). The flow rate is 10–20 mL/min. The detection limit is 5–7 ng of vanadium in the support zone or 0.2–0.5 ng/mL. The determination of 0.5–5 ng/mL vanadium(V) at pH 1.5 does not interfere with 20-fold amounts of V(IV) and 1000-fold amounts of Ni, Zn, Cd, Mg, Co, Cr(III), Mn, PO^3- ₄, and F^–.     

Xanthate complexes of nickel with nitrogen donor ligands. Part V

Nickel(II) xanthate complexes of general formula, [Ni(Rxa)₂(L)] [R = i-Pr, i-Am, xa = OCS^– ₂, L = 4,7-diphenyl-1,10-phenanthroline(baphen), 4,4-dimethyl-2,2-bipyridyl (me₂bpy), 2-9-dimethyl-1,10-phenanthroline(neo) or trans-1,2-diaminocyclohexane (dch)] and [Ni(Rxa)(cyclam)](Rxa) (= 1,4,8,11-tetraazacyclotetradecane) have been synthesized and characterized by elemental analyses, i.r. and electronic spectroscopy, magnetic and conductivity measurements. The complexes with cyclam were studied by cyclic voltammetry. Values of magnetic moments at room temperature lie within the 3.25–3.51 B.M. range and thus indicate the presence of two unpaired electrons, except for the complexes with cyclam, where the anomalous values of 1.76 and 1.74 B.M. were obtained in respect to the nickel(II) complexes. Magnetic susceptibility data for [Ni(i-Prxa)(cyclam)](i-Prxa) were measured over the 79–298 K range and indicate no exchange interaction between paramagnetic nickel(II) centres.     

Metal ion complexes of 2-picolinamineN-oxide

Summary A series of cobalt(II), nickel(II) and copper(II) complexes of 2-picolinamineN-oxide, HA, has been prepared. Solids of formula [M(HA)₃](BF₄)₂ (M=cobalt(II) or nickel(II); [Cu(HA)₂]X₂ (X=BF ₄ ^– , NO ₃ ^– ); [Co(HA)₂X₂] (X=Cl^– or Br^–); [Ni(HA)₂Cl₂] and [Cu(HA)X₂] (X=Cl^– or Br^–] have been isolated and characterized by partial elemental analyses, molar conductivities, magnetic susceptibilities, DSC-TGA, and spectral methods. All complexes were found to be monomeric, and their spectral parameters are compared with those of the metal ion complexes ofN-alkyl-2-picolinamineN-oxides, 2-dialkylaminopyridineN-oxides and 2-picolinamine. The cobalt(II) and nickel(II) halide complexes spectrally show a mixture of octahedral and tetrahedral centres.     

Electrochemical synthesis and magnetic studies of neutral transition metal imidazolates and pyrazolates

Summary The single-step electrochemical synthesis of neutral transition metal complexes of imidazole, pyrazole and their derivatives has been achieved at ambient temperature. The metal was oxidized in an Me₂CO solution of the diazole to yield complexes of the general formula: [M(Iz)₂] (where M = Co, Ni, Cu, Zn; Iz = imidazolate); [M(MeIz)₂] (where M = Co, Ni, Cu, Zn; MeIz = 4-methylimidazolate); [M(PrⁱIz)₂] (where M = Co, Ni, Cu, Zn; PrⁱIz = 2-isopropylimidazolate); [M(pyIz)_n] (where M = Co^III, Cu^II, Zn^II; pyIz = 2-(2-pyridyl)imidazolate); [M(Pz)_n] (where M = Co^III, Ni^II, Cu^II, Zn^II; Pz = pyrazolate); [M(ClPz)_n] and [M(IPz)_n] (where M = Co^III, Ni^II, Cu^II, Zn^II; ClPz = 4-chloropyrazolate; IPz = 4-iodopyrazolate); [M(Me₂Pz)_n] (where M = Co^II, Cu^I, Zn^II; Me₂Pz = 3,5-dimethylpyrazolate) and [M(BrMe₂Pz)_n] (where M = Co^II, Ni^II, Cu^I, Zn^II; BrMe₂Pz = 3,5-dimethyl-4-bromopyrazolate). Vibrational spectra verified the presence of the anionic diazole and electronic spectra confirmed the stereochemistry about the metal centre. Variable temperature (360-90 K) magnetic measurements of the cobalt and copper chelates revealed strong antiferromagnetic interaction between the metal ions in the lattice. Data for the copper complexes were fitted to a Heisenberg (S= ) model for an infinite one-dimensional linear chain, yielding best fit values of J=–62––65cm^–1 andg = 2.02–2.18. Data for the cobalt complexes were fitted to an Ising (S= ) model with J=–4.62––11.7cm^–1 andg = 2.06–2.49.     

Radiochemical studies of the sorption behavior of strontium and barium

The sorption behavior of strontium and barium on kaolinite, bentonite and chlorite-illite mixed clay was studied by radioanalytical techniques using the batch method.⁹⁰Sr (29.1 y) and¹³³Ba (10.5 y) were used as radiotracers. Characterization of the solid matrices was done by FTIR and XRD spectrometries and specific surface area measurements. Synthetic groundwater was used as the aqueous phase. The variation of the distribution ratioR _d, as a function of metal ion loading was examined. The sorption isotherms were fitted to various isotherm models. The sorption energies were calculated to be in the range of 8–10 kJ/mol suggesting an ion exchange type of sorption mechanism. In detailed experiments, chlorite-illite mixed clay was first presaturated with K⁺, Sr²⁺, Ca²⁺ and Al³⁺ ions, respectively, prior to sorption studies with Ba²⁺ ions. The results of Ca²⁺ pretreated chlorite-illite were very similar to those of natural chlorite-illite, suggesting that the Ba²⁺ ion exchanges primarily with the Ca²⁺ ion on the clay minerals.     

Kinetics and mechanism of exchange reaction of [Y(APTA)] (APTA=o-aminophenol-N,N, O-triacetic acid) with copper(II)

Summary The kinetics of the exchange reaction between [Y(APTA)] and Cu^II have been investigated over a range of [H⁺] from 2.5×10^–5 to 7.5×10^–4 mol dm^–3 at 30°C and ionic strength 0.2 mol dm^–3 KNO₃. The results show that the exchange reaction proceeds via both self-and proton-catalyzed dissociation of [Y(APTA)] and also by the direct attack of Cu^II on [Y(APTA)]. The corresponding rate constants k_d, k _h and k_Cu have been evaluated as 6.3s^–1, 8.4×10⁴ mol^–1 dm³ s^–1 and 416mol^–3 dm³ s^–1 respectively. The possible intermediates are discussed in terms of the structure of APTA. The complex-formation rate constants of Y^III with APTA^3- and HAPTA^2- were also obtained.     

Sorption of U(VI) on granite

The sorption-desorption of uranium (VI) on Grimsel granite of Switzerland was studied under oxidizing conditions with an initial uranium concentration range of between 9.7·10^–7 and 4.5·10^–4M, using a batch technique. The sorption coefficients varied between 8.0 and 0.4 ml/g and sorption was not fully reversible. The data could be fitted to a Freundlich isotherm. By fitting the data with the Dubinin-Radushkevich equation, a mean energy of sorption of 10.7 kJ/mol was calculated, which corresponds to the energy of ion exchange reactions. The kinetic data could be interpreted by assuming diffusion into the crushed granite particles. The calculated pore diffusion coefficient was between 2.0·10^–11–7.7·10^–11 m²/s.     

Kinetics of chlorine isotope exchange reaction between sodium chloride-36 and triphenyltin chloride in mixed solvents

Isotope exchange reaction between NaCl-36 and triphenyltin chloride in dioxane-water (8020% w/w) and ethanol-water (9010% w/w) mixed solvents has been studied at 25, 35 and 50 °C. The exchange reaction was found to proceed via a bimolecular S_N2, limiting mechanism with reaction rates depending on the solvent used. Inhibition of the exchange in ethanol-water is probably due to solvation of chloride ion through hydrogen bond formation. The rate laws for the exchange reactions are: R_e=3.24×10⁹ e^–65550/RT [Rh₃SnCl] [NaCl] in dioxanewater and R_e=6.61×10⁸ e^–69600/RT [Ph₃SnCl] [NaCl] in ethanol-water, where is the degree of dissociation of NaCl and R_e is the rate of exchange in mol l^–1 s^–1. The activation parameters H^*, S^* and G^* are reported.     

Synthesis of unsymmetrical compartmental oxime nickel(II) and copper(II) complexes: spectral, electrochemical and magnetic studies

A new series of binuclear unsymmetrical compartmental oxime complexes (1–5) [M₂L] [M=Cu(II), Ni(II)] have been synthesized using mononuclear complex [ML] (L=1,4-bis[2-hydroxy-3-(formyl)-5-methylbenzyl]piperazine), hydroxylamine hydrochloride and triethylamine. In this system there are two different compartments, one has piperazinyl nitrogens and phenolic oxygens and the other compartment has two oxime nitrogens and phenolic oxygens as coordinating sites. The complexes were characterized by elemental and spectral analysis. Electrochemical studies of the complexes show two step single electron quasi-reversible redox processes at cathodic potential region. For copper complexes E¹ _pc=−0.18 to −0.62 and E² _pc=−1.18 to −1.25 V, for nickel complexes E¹ _pc=−0.40 to −0.63 and E² _pc=−1.08 to −1.10 V and reduction potentials are sensitive towards the chemical environment around the copper and nickel atoms. The nickel(II) complexes undergo two electrons oxidation. The first one electron oxidation is observed around +0.75 V and the second around +1.13 V. ESR Spectra of the binuclear copper(II) complexes [Cu₂L](ClO₄), [Cu₂L(Cl)], [Cu₂L(NO₃)] shows a broad signal at g=2.1 indicating the presence of coupling between the two copper centers. Copper(II) complexes show a magnetic moment value of μ_eff around 1.59 B.M at 298 K and variable temperature magnetic measurements show a −2J value of 172 cm⁻¹ indicating presence of antiferromagnetic exchange interaction between copper(II) centres.     

Paramagnetic complexes of nickel(I) stabilized by norbornadiene

Nickel(I) compounds whose concentration was 10^–4–10^–6 of the total concentration of nickel added to the system were identified by EPR in the reaction of 2,5-norbornadiene with nickel homoligand allyl complexes Niall₂ (all is C₃H₅, 1-CH₃C₃H₄, or 2-CH₃C₃H₄). The Ni(I) complexes were stable at room temperature under oxygen-free conditions. It was shown that the paramagnetic complexes were in equilibrium with diamagnetic forms. The temperature dependence of the concentration of the paramagnetic species was determined. The structure of the paramagnetic nickel(I) complexes and the possible routes of their formation are discussed on the basis of the obtained data.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 26, No. 4, pp. 490–493, July–August, 1990.     

One electron oxidation of Ni(II)-iminodiacetate by carbonate radical

Reactions of carbonate radical (CO₃ ^–), generated by photolysis or by radiolysis of a carbonate solution with nickel(II)-iminodiacetate (Ni(II)IDA) were studied at pH 10.5 and ionic strength (I)==0.2 mol·dm^–3. The stable product arising from the ligand degradation in the complex is mainly glyxalic acid. Time-resolved spectroscopy and transient kinetics were studied using flash photolysis. From the kinetic data it was suggested that the carbonate radical initially reacts with Ni(III)IDA with a rate constant (2.4±0.4)·10⁶ dm³·mol^–1·s^–1 to form a Ni(II)IDA species which, however, undergoes a first-order transformation (k=2.7·10²·s^–1) to give a radical intermediate of the type Ni(II)RNHCHCO ₂ ^– ) which rapidly forms an adduct containing a Ni–C bond. This adduct decays very slowly to give rise to glyoxalic acid. From a consideration of equilibrium between Ni(II)IDA and Ni(III)IDA, the one electron reduction potential for the Ni(III)IDA/Ni(II)IDA couple was determined to be 1.467 V.     

The thermorchemistry of the di-η5-cyclopentadienyl derivatives of the first transition series and their unipositive ions

The heats of formation [△H⁰f(MCp₂, c, 298)] have been determined for the di-η⁵-cyclopentadienyl derivatives of magnesium, vanadium, chromium, manganese, iron, cobalt and nickel, by static-bomb calorimetry. They are (in kJ mol^-1) (M =) Mg, 77.0 ± 3; V, 123 ± 4; Cr, 186 ± 3; Mn, 198 ± 2; Fe, 158 ± 4; Co, 205 ± 4; and Ni, 262 ± 3.the heats of formation [△H⁰_f(M(CO)_xCp, c, 298)] of tricarbonylcyclopentadienylmanganese and dicarbonylcyclopentadienylcobalt have also been determined as —478 ± 1 and —169 ± 10 kJ mol^?1, respectively.By using the measured heats of formation of the metallocenes of the first transition series and other enthalpy values from the literature in Hess's law cycles, the feasibility of the process MCp₂ → MCp⁺₂ + e (obtained from the photoelectron ionisation energies) has been analysed and shown to be the result of the interplay of exchange energy and ligand-field stabilisation energy terms in these low-spin complexes. The feasibility order, V < Cr > Mn > Fe < Co > Ni is associated with the special stability associated with half-filled and filled shelss, which, because of the large ligand-field splitting, occur at d³, d⁶, d⁸ and d¹⁰.It is shown that bond energy additivity does not occur for the above cyclopentadienylmetal carbonyls.