等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

Semiconductor quantum dots and metal nanoparticles: syntheses,optical properties,and biological applications

We review the syntheses, optical properties, and biological applications of cadmium selenide (CdSe) and cadmium selenide–zinc sulfide (CdSe–ZnS) quantum dots (QDs) and gold (Au) and silver (Ag) nanoparticles (NPs). Specifically, we selected the syntheses of QDs and Au and Ag NPs in aqueous and organic phases, size- and shape-dependent photoluminescence (PL) of QDs and plasmon of metal NPs, and their bioimaging applications. The PL properties of QDs are discussed with reference to their band gap structure and various electronic transitions, relations of PL and photoactivated PL with surface defects, and blinking of single QDs. Optical properties of Ag and Au NPs are discussed with reference to their size- and shape-dependent surface plasmon bands, electron dynamics and relaxation, and surface-enhanced Raman scattering (SERS). The bioimaging applications are discussed with reference to in vitro and in vivo imaging of live cells, and in vivo imaging of cancers, tumor vasculature, and lymph nodes. Other aspects of the review are in vivo deep tissue imaging, multiphoton excitation, NIR fluorescence and SERS imaging, and toxic effects of NPs and their clearance from the body. Figure Semiconductor quantum dots and metal nanoparticles have extensive applications, e.g., in vitro and in vivo bioimaging Tamitake Itoh and Abdulaziz Anas contributed equally to this article.     

Flash vacuum pyrolysis of azo and nitrosophenols: new routes towards hydroxyarylnitrenes and their reactions

Flash vacuum pyrolysis of phenylazonaphthols and nitrosonaphthols at 700°C and 0.02 Torr yielded quinoline, isoquinoline, indene and naphthols (and aniline only from the phenylazo derivatives). Similar FVP of p-nitroso and p-phenylazophenol gave pyridine. Also, FVP of phenanthraquinonemonophenylhydrazone and monooxime gave phenathridine and fluorenone. The formation of the heterocyclic system was assumed to involve nitrene and azatropone intermediates.     

Simultaneous analysis of serotonin, melatonin, piceid and resveratrol in fruits using liquid chromatography tandem mass spectrometry

An analytical method was developed for the simultaneous quantification of serotonin, melatonin, trans- and cis-piceid, and trans- and cis-resveratrol using reversed-phase high performance liquid chromatography coupled to mass spectrometry (HPLC-MS) with electrospray ionization (ESI) in both positive and negative ionization modes. HPLC optimal analytical separation was achieved using a mixture of acetonitrile and water with 0.1% formic acid as the mobile phase in linear gradient elution. The mass spectrometry parameters were optimized for reliable quantification and the enhanced selectivity and sensitivity selected reaction monitoring mode (SRM) was applied. For extraction, the direct analysis of initial methanol extracts was compared with further ethyl acetate extraction. In order to demonstrate the applicability of this analytical method, serotonin, melatonin, trans- and cis-piceid, and trans- and cis-resveratrol from 24 kinds of commonly consumed fruits were quantified. The highest serotonin content was found in plantain, while orange bell peppers had the highest melatonin content. Grape samples possessed higher trans- and cis-piceid, and trans- and cis-resveratrol contents than the other fruits. The results indicate that the combination of HPLC-MS detection and simple sample preparation allows the rapid and accurate quantification of serotonin, melatonin, trans- and cis-piceid, and trans- and cis-resveratrol in fruits.     

二苯二硫和二苄二硫润滑性能的量子化学研究

The molecular geometries optimization and electronic structures of diphenyl disulfide (DPDS) and dibenzyl disulfide (DBDS) compounds were investigated by density functional theory (DFT) and ab initio method at the 6-31G basis set level. The active atoms and bonds of reaction were provided by frontier molecular orbital theory. The molecular orbital parameters of DPDS and DBDS compounds and iron atom cluster were calculated by using density functional theory. The interaction pattern between the organic disulfide compounds and iron atom cluster was discussed based on the approximate rule of orbital energy. Some parameters characterizing the action strength between the organic disulfide compounds and iron atom cluster, including the bonding strength, reactive strength and static action strength, were analyzed by using frontier electron density, super de-localizability, net atomic charge and the interaction energy of chemical adsorption as criteria. The results indicate that S-S chemical bond and C-S chemical bond of the compounds are inclined to be broken when DPDS and DBDS interact with the metal. The anti wear ability order of DPDS and DBDS compounds is DPDS>DBDS, and the extreme pressure ability order of DPDS and DBDS compounds is DBDS>DPDS, and the prediction results based on quantum chemistry calculations are in good accordance with the friction and wear test results.     

SYNTHESIS, CHARACTERIZATION, THERMAL DEGRADATION AND ELECTROCHEMICAL PROPERTIES OF OLIGO-4-m-TOLYLAZOMETHINEPHENOL

The oxidative polycondensation reaction conditions of 4-m-tolylazomethinephenol （4-TAMP） in the presence of air O2 and NaOCl as oxidants were studied in an aqueous alkaline medium between 50 and 90℃. The structures of the obtained monomer and oligomer were confirmed by FT-IR, UV-Vis, ^1H- and ^13C-NMR and elemental analysis techniques. The physical characterization was made by TG-DTA, size exclusion chromatography （SEC） and solubility tests. At the optimum reaction conditions, the yield of oligo-4-m-tolylazomethinephenol （O-4-TAMP） was found to be 62.50% （for air O2 oxidant） and 90.0% （for NaOCl oxidant）, respectively. According to the SEC analysis, the number-average molecular weight （Mn）, weight-average molecular weight （Mw） and polydispersity index （PDI） values of O-4-TAMP were found to be 2310, 2610 g tool 1 and 1. 13, respectively, using air O2, and 1390, 1710 g mol^-1 and 1.23, using NaOCl, respectively. According to TG-DTA analyses, O-4-TAMP was more stable than 4-TAMP against thermal decomposition. The weight losses of 4-TAMP and O-4-TAMP were found to be 68% and 58% at 1000℃. Electrical conductivity of the O-4-TAMP was measured, showing that the polymer is a typical semiconductor. Electrochemically, the highest occupied molecular orbital （HOMO）, the lowest unoccupied molecular orbital （LUMO） and electrochemical energy gaps （E＇g） for 4-TAMP are -5.96, -3.22 and 2.74 eV, respectively. The HOMO, LUMO and （E＇g） for O-4-TAMP are -5.78, -3.44 and 2.34 eV, respectively. According to UV-Vis measurements, optical band gaps （Eg） of 4-TAMP and O-4-TAMP were found to be 3.45 and 3. 1 0 eV, respectively.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

ADSORPTION OF CHLOROFORM AND TRICHLOROETHYLENE IN WATER WITH A NEW KIND OF HYPERCROSSLINKED RESINS

In this paper two newly developed hypercrosslinked resins were used to treat micropolluted drinking water and their static and kinetic adsorption were investigated at 293 K. The results show that these two adsorbents are superior to Amberlite XAD-4 for removing chloroform and trichloroethylene in aqueous solutions. The breakthrough capacity and the total capacities from mini-column adsorption studies for chloroform and trichloroethylene on XAD-4, ZH-01 and ZH-00 are calculated respectively under experimental conditions     

蛋白质、凝胶电泳及其分析应用

蛋白质是重要的生物高分子，具有催化、传输、运动、防御和调节等重要生理功能，其分离、纯化和表征对理解和利用它们在生命过程中的作用具有重大理论意义和实际价值。凝胶电泳是蛋白质测定中应用最广泛和最强有力的工具。本文讨论凝胶电泳方法及其在蛋白质分析方面的新进展。首先介绍蛋白质的性质和功能，然后讨论蛋白质试样制备方法，最后评述各种凝胶电泳分离技术及其在蛋白质分离、纯化和表征等方面的应用。