共查询到20条相似文献,搜索用时 31 毫秒
1.
Endothelial cell migration on surface-density gradients of fibronectin, VEGF, or both proteins 总被引:1,自引:0,他引:1
Liu L Ratner BD Sage EH Jiang S 《Langmuir : the ACS journal of surfaces and colloids》2007,23(22):11168-11173
Cell migration is essential to many physiological processes, including angiogenesis, which is critical to the success of implanted biomaterials and tissue-engineered constructs. Gradients play an important role in cell migration. Previous work on cell migration has been mostly executed either in the concentration gradients of stimuli (e.g., VEGF) in bulk or hydrogels or on the surface-density gradients of ECM proteins (e.g., fibronectin) or small ligands (e.g., RGD). Little work has been done to investigate how cell migration responds to the surface-density gradients of growth factors. No work has been done to study how the surface gradients of both adhesive proteins and growth factors influence cell migration. In this work, we studied the effect of the surface-density gradients of fibronectin (FN), VEGF, or both proteins on endothelial cell migration. Gradients with different slopes were prepared to study how the gradient slope affects cell migration. The gradients were generated by first forming a counter-propagating C15COOH/C11OH self-assembled monolayer (SAM) gradient using a surface electrochemistry approach, followed by activating the -COOH moieties and covalently immobilizing proteins onto the surface. Fourier transform infrared spectra and X-ray photoelectron spectroscopy were used to characterize the SAM and protein gradients, respectively. A free cell migration assay using bovine aortic endothelial cells was performed on various gradient surfaces or on surfaces with uniform protein density. Results showed that cells on the surface-density gradients of FN, VEGF, or both proteins moved faster along the gradient direction than on the respective uniform control surface after 24-h cell culture. It is also shown that for each protein or protein combination, the directional cell displacement was not statistically different between two gradients with different slopes. Results show that the directional cell migration was increased by about 2-fold on the VEGF gradient as compared to the FN gradient and was further increased by another 2-fold on the combined gradients of both proteins as compared to the VEGF gradient alone. This is the first work to create surface-density gradients of VEGF and the first study to generate a combined surface gradient of growth factor and ECM protein to investigate their effect on cell migration on surfaces. This work broadens our understanding of the directional movement of endothelial cells. Our findings provide useful information for directing cell migration into tissue-engineered constructs and can be potentially used for those applications where cell migration is critical, such as angiogenesis. 相似文献
2.
Sankhe AY Booth BD Wiker NJ Kilbey SM 《Langmuir : the ACS journal of surfaces and colloids》2005,21(12):5332-5336
Combining inkjet printing and atom-transfer radical polymerization (ATRP) provides a straightforward and versatile method for producing patterned polymer surfaces that may serve as platforms for a variety of applications. We report the use of drop-on-demand technology to print binary chemical gradients and simple patterns onto solid substrates and, by using surface-confined ATRP, amplify these patterns and gradients. Chemically graded monolayers prepared by inkjet printing dodecanethiol and backfilling with 11-mercaptoundecanol showed continuous changes in the water contact angle along the gradient. These samples also exhibited a distinct change in the intensity of methyl group and C-O stretching modes along the gradient. Graded or patterned polymer layers were produced by growing, with ATRP, tethered poly(methyl methacrylate) (PMMA) layers from gradient or patterned printed monolayers that contained a bromo-capped initiator. Atomic force microscopy and optical microscopy confirmed that the PMMA layers amplified the underlying printed initiator layer with remarkable fidelity. 相似文献
3.
In this paper we present different experiments describing the fabrication and characterisation of self-assembled monolayers of organothiols and also discuss some of the most important applications of these systems. The reader may practise the fabrication and characterisation of self-assembled monolayers with different endgroups by adsorption of CH3- and Oh-terminated alkanethiols on copper-coins (1 or 2 Pfenningcoins). Then patterned self-assembled monolayers of CH3- and OH-terminated alkanethiols are produced by applying the microcontact printing technique. When these gratings are wet with water-e.g. by breathing into the surfaces-the water adsorbs onto the hydrophilic OH-terminated areas but not on the hydrophobic CH3-terminated regions. Illumination with a laser then produces bright diffraction spots which disappear when the water evaporates. Finally, we briefly discuss applications of the self-assembled ultrathin films as sensor-devices and as substrates for CVD (chemical vapour deposition). 相似文献
4.
Bietsch A Hegner M Lang HP Gerber C 《Langmuir : the ACS journal of surfaces and colloids》2004,20(12):5119-5122
Inkjet printing allows localized, contact-free deposition of liquids onto arbitrary substrates. In this article we demonstrate the fast formation of high-quality self-assembled monolayers (SAMs) on gold surfaces. Using a selective etch process, we verify the uniformity of the deposited spots. A direct comparison with microcontact-printed SAMs on Au revealed similar resist quality as inkjet-deposited alkanethiolate SAMs. Likewise, inkjet printing of thiol-functionalized and non-thiolated single-stranded DNA oligomers formed molecular layers protecting Au from etchants. For all compounds used, we achieved etched patterns that were homogeneous and free of defects. These results indicate that an inkjet is a convenient tool for surface functionalization and the direct writing of molecular films and resists. 相似文献
5.
6.
Patterned homeotropic alignment using nanoparticles (NPs) was achieved using inkjet printing. Two types of gold NPs, one smaller and one larger in core diameter (2 and 5 nm) capped with a monolayer of dodecanethiol, and emissive carbon dots with a core diameter of 2.5 nm featuring a mixed ligand shell of carboxylic acid groups and aliphatic hydrocarbon chains were tested on both rigid glass and flexible polycarbonate substrates. To define the director across the entire cell and not just in the NP-printed areas, alignment ‘underlayers’ were tested, and 30° obliquely evaporated SiOx as alignment ‘underlayer’ generally provided the best results with the highest quality of the homeotropic alignment as well as the best contrast at the boundary between printed and non-printed (i.e. homeotropic and planar) domains of the fabricated cells. We also report that the chemical nature of the nematic liquid crystal (LC) used, the number of layers printed and the composition of the nano-ink need to be adjusted to obtain pattern alignment devices that positively benefit from both the properties of the LC and the nanomaterial printed. 相似文献
7.
Inkjet printed (bio)chemical sensing devices 总被引:2,自引:0,他引:2
Nobutoshi Komuro Shunsuke Takaki Koji Suzuki Daniel Citterio 《Analytical and bioanalytical chemistry》2013,405(17):5785-5805
Inkjet printing has evolved from an office printing application to become an important tool in industrial mass fabrication. In parallel, this technology is increasingly used in research laboratories around the world for the fabrication of entire (bio)chemical sensing devices or single functional elements of such devices. Regularly stated characteristics of inkjet printing making it attractive to replace an alternative material deposition method are low cost, simplicity, high resolution, speed, reproducibility, flexibility, non-contact, and low amount of waste generated. With this review, we give an overview over areas of (bio)chemical sensing device development profiting from inkjet printing applications. A variety of printable functional sensor elements are introduced by examples, and the advantages and challenges of the inkjet method are pointed out. It is demonstrated that inkjet printing is already a routine tool for the fabrication of some (bio)chemical sensing devices, but also that novel applications are being continuously developed. Finally, some inherent limitations of the method and challenges for the further exploitation of this technology are pointed out. 相似文献
8.
Kentaro Yamada Prof. Dr. Terence G. Henares Prof. Dr. Koji Suzuki Prof. Dr. Daniel Citterio 《Angewandte Chemie (International ed. in English)》2015,54(18):5294-5310
Rapid, precise, and reproducible deposition of a broad variety of functional materials, including analytical assay reagents and biomolecules, has made inkjet printing an effective tool for the fabrication of microanalytical devices. A ubiquitous office device as simple as a standard desktop printer with its multiple ink cartridges can be used for this purpose. This Review discusses the combination of inkjet printing technology with paper as a printing substrate for the fabrication of microfluidic paper‐based analytical devices (μPADs), which have developed into a fast‐growing new field in analytical chemistry. After introducing the fundamentals of μPADs and inkjet printing, it touches on topics such as the microfluidic patterning of paper, tailored arrangement of materials, and functionalities achievable exclusively by the inkjet deposition of analytical assay components, before concluding with an outlook on future perspectives. 相似文献
9.
Kirk JT Fridley GE Chamberlain JW Christensen ED Hochberg M Ratner DM 《Lab on a chip》2011,11(7):1372-1377
The transformative potential of silicon photonics for chip-scale biosensing is limited primarily by the inability to selectively functionalize and exploit the extraordinary density of integrated optical devices on this platform. Silicon biosensors, such as the microring resonator, can be routinely fabricated to occupy a footprint of less than 50 × 50 μm; however, chemically addressing individual devices has proven to be a significant challenge due to their small size and alignment requirements. Herein, we describe a non-contact piezoelectric (inkjet) method for the rapid and efficient printing of bioactive proteins, glycoproteins and neoglycoconjugates onto a high-density silicon microring resonator biosensor array. This approach demonstrates the scalable fabrication of multiplexed silicon photonic biosensors for lab-on-a-chip applications, and is further applicable to the functionalization of any semiconductor-based biosensor chip. 相似文献
10.
《Current Opinion in Colloid & Interface Science》2014,19(2):155-162
Recent advances in the development of stable dispersions of nanophase metal particles have allowed the direct fabrication of metal patterns (e.g., printed circuits, RFID tags, touch screens, etc.) by simple additive type inkjet processes. Such processes replace the more costly and less environmentally friendly subtractive lithographic type photoprocesses involving selective etching of photoresists and metal layers and more complex additive type process using photocatalysts for patterned metal deposition by electroless plating processes and inkjet patterning of metal catalyst or catalyst precursor for subsequent metallization by electroless plating. The recent development of electrohydrodynamic jet printing (e-jet printing), in which the ink drop is ejected under the influence of an electric field, has allowed a significant resolution increase vs. conventional inkjet printing with a piezoelectric head (printing resolution of ca. 100 nm for e-jet printing vs. ca. 20 μm for inkjet printing). 相似文献
11.
We report on the fabrication process of a sensing device obtained by ink-jet printing of polyaniline suspension on alumina substrates. We optimized the inkjet parameters (amplitude and duration of jetting impulse, jetting frequency, substrate velocity) to obtain thin polyaniline lines as sensitive layers and we analyzed the morphology of PANI lines on substrate. Device response towards ammonia are also discussed and compared with reference device obtained by spin-coating. 相似文献
12.
This paper presents a method for positioning and aligning self-assembled tubules of 1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphochloline (DC(8,9)PC) by withdrawing a patterned Au substrate from tubule solution. The patterned Au substrates with alternating bare Au stripes and thiol monolayer stripes are formed by microcontact printing. We find that the lipid tubules selectively adsorb on the bare Au stripes but show no orientation order. By withdrawing the patterned Au substrates at the direction along the stripes from tubule solution, the lipid tubules are found to be aligned along the direction of the Au stripes. The angular distribution and the density of the aligned lipid tubules depend on the withdrawal rates and the adsorption time, respectively. We conclude that forces causing tubule alignment that originate in the surface tension associated with the moving meniscus dominate alignment forces exerted by the patterned Au substrates. 相似文献
13.
An in situ self-assembled molecular layer of 1-pyrenesulfonic acid sodium salt as an alignment agent was formed on indium tin oxide substrates for vertically aligning liquid crystals (LCs). The thus-aligned LCs exhibited uniform vertical alignment under crossed polarisers. The electro-optical characteristic of the LC cell fabricated using this method exhibited better performance than those of conventional LC cells with a polyimide alignment layer. Because the proposed alignment method is a simple one and involves low concentrations of the alignment agent (0.05 wt%), it is highly cost-effective. Further, the pyrene derivative, when mixed with LCs, exhibited photoluminescence (PL) under ultraviolet light. Given that the proposed method resulted in highly vertically aligned LCs and the alignment agent exhibited PL, the method should find wide use in the fabrication of colour-filter-free LC displays. 相似文献
14.
Hsueh Shih Chen Ramachandran Vasant Kumar Bartlomiej Andrzej Glowacki 《Journal of Sol-Gel Science and Technology》2009,51(1):102-111
A statistical route, Taguchi Design, applied to the analysis of experimental factors for coating lanthanum zirconium oxide
films on metal substrates by inkjet printer is presented. The synthesis of lanthanum zirconium oxide precursor is derived
from a chemical solution containing lanthanum acetate hydrate, zirconium propoxide, propionic acid, glacial acetic acid, and
methanol anhydrous. Experimental factors analyzed by Taguchi Design show that the ratio of lanthanum acetate to propionic
acid and the concentration of precursor used for inkjet printing are the dominant factors for the quality of films. With the
deduced optimum conditions, lanthanum zirconium oxide films reveal good surface morphology and high out-of-plane alignment
that is consistent with the Taguchi prediction. 相似文献
15.
Kraus T Stutz R Balmer TE Schmid H Malaquin L Spencer ND Wolf H 《Langmuir : the ACS journal of surfaces and colloids》2005,21(17):7796-7804
We describe a method to exploit the mass-transfer limitations of microcontact printing for the fabrication of surfaces with well-defined, arbitrarily shaped composition variations. An analysis of the transport processes reveals that the printing of hexadecanethiol (HDT) from poly(dimethylsiloxane) is purely diffusion-controlled. Stamps with geometries that enhance surface-normal diffusion paths therefore allow not only the contours, but also the local density of self-assembled monolayers to be controlled. We use stamps with variable thickness and uniform ink concentration to print HDT density gradients on gold, depleting the stamps during the process. In the second step, a perfluorinated thiol fills the vacancies in the partial monolayer to form a two-component gradient that we analyze by means of X-ray photoelectron spectroscopy and spectroscopic ellipsometry. Linear and radial gradients are shown here as examples for a wide range of geometries that can be fabricated with high precision using the method. 相似文献
16.
Carmen Carrasquilla Jessamyn R. L. Little Prof. Dr. Yingfu Li Prof. Dr. John D. Brennan 《Chemistry (Weinheim an der Bergstrasse, Germany)》2015,21(20):7369-7373
There is growing interest in developing printable paper sensors to enable rapid testing of analytes for environmental, food safety, and clinical applications. A major challenge is to find suitable bioinks that are amenable to high‐speed printing and remain functional after printing. We report on a simple and effective approach wherein an aqueous ink composed of megadalton‐sized tandem repeating structure‐switching DNA aptamers (concatemeric aptamers) is used to rapidly create patterned paper sensors on filter paper by inkjet printing. These concatemeric aptamer reporters remain immobilized at the point of printing through strong adsorption but retain sufficient segmental mobility to undergo structure switching and fluorescence signaling to provide both qualitative and quantitative detection of small molecules and protein targets. The convenience of inkjet printing allows for the patterning of internally referenced sensors with multiplexed detection, and provides a generic platform for on‐demand printing of sensors even in remote locations. 相似文献
17.
Alkylsilane self-assembled monolayers (SAMs) on oxide substrates are commonly used as liquid crystal (LC) alignment layers. We have studied the effects of alkyl chain length, photolytic degradation, and mechanical rubbing on polar and azimuthal LC anchoring. Both gradient surfaces (fabricated using photolytic degradation of C18 SAMs) and unirradiated SAMs composed of short alkyl chains show abrupt transitions from homeotropic to tilted alignment as a function of degradation or chain length. In both cases, the transition from homeotropic to tilted anchoring corresponds to increasing wettability of the SAM surfaces. However, there is an offset in the critical contact angle for the transition on gradient vs unirradiated SAMs, suggesting that layer thickness is more relevant than wettability for LC alignment. Mechanical rubbing can induce azimuthal alignment along the rubbing direction for alignment layers sufficiently near the homeotropic-to-planar transition. Notably, mechanical rubbing causes a small but significant shift in the homeotropic-to-tilted transition, e.g., unrubbed C5 SAMs induce homeotropic anchoring, but the same surface after rubbing induces LC pretilt. 相似文献
18.
Importance of domain purity in semi‐conducting polymer/insulating polymer blends transistors
下载免费PDF全文
![点击此处可从《Journal of Polymer Science.Polymer Physics》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Guocheng Zhang Huihuang Yang Lilin He Liqin Hu Shuqiong Lan Fushan Li Huipeng Chen Tailiang Guo 《Journal of Polymer Science.Polymer Physics》2016,54(17):1760-1766
Printed electronics is a rapidly developing field of research which covers any electronic devices or circuits that can be processed using direct printing techniques. Among those printing techniques, inkjet printing is a technique of increasing interest for organic field‐effect transistors (FETs) due to its fully data driven and direct patterning. In this work, the morphology of semi‐conducting polymer/insulating polymer blends from inkjet printing and their FET properties have been investigated. We attempted to optimize the morphology of the blends by the addition of a co‐solvent to the blend solution prior to film deposition. By varying the boiling temperature of the co‐solvent, blend films are fabricated with varying domain purity and different degree of semi‐conducting polymer ordering. The morphologies of all the as‐cast samples from inkjet printing and subsequently thermally annealed samples are characterized by grazing incidence wide angle x‐ray scattering and small angle neutron scattering. The results indicate that the sample where a low boiling temperature co‐solvent is used exhibits a lower degree of semi‐conducting polymer ordering and less pure domains, resulting in a decrease of hole mobility. The morphologies that are formed when high boiling temperature co‐solvent is used, however, give a higher degree of semi‐conducting polymer ordering along with higher domain purity, significantly improving hole mobility up to 1.44 cm2 V?1 s?1 at VDS = 40 V. More importantly, with thermal annealing, all the samples exhibit similar semi‐conducting polymer ordering and domain sizes while the domain purity significantly varies. This work is a unique example that demonstrates the importance of domain purity in the optimization of morphology and FET performance, which is previous unavailable. It also provides a novel process that can efficiently control the morphology of semi‐conducting polymer/insulating polymer mixtures during deposition to maximize FET performance from inkjet printing. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1760–1766 相似文献
19.
Improving neuron-to-electrode surface attachment via alkanethiol self-assembly: an alternating current impedance study 总被引:1,自引:0,他引:1
Slaughter GE Bieberich E Wnek GE Wynne KJ Guiseppi-Elie A 《Langmuir : the ACS journal of surfaces and colloids》2004,20(17):7189-7200
In this work, the omega-amine alkanethiols, cysteamine (CA) and 11-amino-1-undecanethiol (11-AUT), were chemisorbed as self-assembled monolayers (SAMs) onto 250-microm gold microelectrodes that were microlithographically fabricated within eight-well cell culture plates and investigated as a means to improve neuron-to-electrode surface attachment (NESA). Dynamic contact angle (DCA) measurements showed similar advancing, theta(a) (69 degrees and 65 degrees ), but contrasting receding contact angles, theta(r) (9 and 30 degrees ) for CA- and 11-AUT-SAMs, respectively. The corresponding hysteresis (Deltatheta(ar) = 60 and 35 degrees, respectively) indicates the CA-SAM displays greater amphiphilic character than the 11-AUT-SAM. A portion of the greater Deltatheta(ar) for CA-SAMs may arise from surface heterogeneity, as compared to sputter-deposited gold and 11-AUT-SAMs. Tapping mode atomic force microscopy (AFM) confirmed a 6% increase (CA-SAM) and a 22% decrease (11-AUT-SAM) in surface roughness when compared to clean but unmodified, sputter-deposited gold. The extracellular matrix cell adhesion proteins, collagen, fibronectin, and laminin, were covalently coupled to the aminoalkanethiol-decorated gold electrodes via acid-amine heterobifunctional cross-linking. Using fluorescein isothiocyanate-tagged laminin, confocal fluorescence microscopy of both CA- and 11-AUT-SAM-modified and unmodified gold microelectrodes confirmed coupling of the protein to the electrode and was readily distinguishable from nonspecifically adsorbed protein. DCA measurements of laminin physisorbed directly onto gold or covalently immobilized via CA- or 11-AUT-SAM had similar advancing (ca. 63-65 degrees ) and receding (ca. 7-9 degrees ) contact angles. Tapping mode AFM of these protein-bearing surfaces likewise showed dimerized protein aggregates of similar surface roughness. PC-12 cells cultured to confluence on both unmodified and SAM-modified, protein-derivatized gold microelectrodes were examined by alternating current impedance (50 mV p-t-p at 4 kHz). CA- and 11-AUT-SAM-modified surfaces when serving as a foundation or covalently immobilized adhesion proteins produced highly stable and reproducible temporal impedance responses. On the basis of the magnitude and the reproducibility of the impedance responses, the CA-SAM-modified surfaces were identified as being best suited for optimal neuron-to-electrode contact with laminin. Laminin performed best when compared to collagen and fibronectin. Covalent immobilization of the adhesion-promoting proteins results in enhanced NESA by tightly anchoring cells to the electrode. 相似文献
20.
An inkjet printing procedure for depositing films of carbon nanotubes (CNTs) that exhibit a very high degree of long-range mutual alignment as well as a controlled orientation with respect to the printed geometry is presented. CNT self-assembly was induced by the intrinsic lyotropic liquid crystallinity of CNT suspensions. Sufficient concentrations are reached by matching the inkjet deposition rate to the numerically modeled local evaporation rate of the printed feature and enable the CNT suspension to be printed using standard inkjet printing. Surface alignment was verified using scanning electron microscopy (SEM) and polarized light microscopy. In addition, the bulk morphology was investigated and found to be composed of stacked planar layers that did not necessarily have the same long-range orientation found on the surface. The bulk morphology was characterized by removing layers through an elastomeric peeling process and by observing cross sections of the films using SEM. CNT concentration and length were spanned experimentally, and it was found that very short and very long CNTs as well as low concentration suspensions did not yield long-range alignment. 相似文献