等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Core-shell lipid-polymer nanoparticles as a promising ocular drug delivery system to treat glaucoma

Nowadays,tremendous researches have been focused on the core-shell lipid-polymer nanoparticles(LPNs) due to the advantages of both liposomes and polymer nanoparticles.In this work,LPNs were applied to encapsulate brinzolamide(Brz-LPNs) for achieving sustained drug release,improving drug corneal permeation and enhancing drug topical therapeutic effect.The structure of Brz-LPNs was composed of poly(lactic-co-glycolic) acid(PLGA) nanocore which encapsulated Brz(Brz-NPs) and lipid shell around the core.Brz-LPNs were prepared by a modified thin-film dispersion method.With the parameters optimization of Brz-LPNs,optimal Brz-LPNs showed an average particle size of151.23±1.64 nm with a high encapsulation efficiency(EE) of 86.7%±2.28%.The core-shell structure of Brz-LPNs were confirmed by transmission electronic microscopy(TEM).Fourier transformed infrared spectra(FTIR) analysis proved that Brz was successfully entrapped into Brz-LPNs.Brz-LPNs exhibited obvious sustained release of Brz,compared with AZOPT^■ and Brz-LPs.Furthermore,the corneal accumulative permeability of Brz-LPNs significantly increased compared to the commercial available formulation(AZOPT^■) in vitro.Moreover,Brz-LPNs(1 mg/mL Brz) showed a more sustained and effective intraocular pressure(IOP) reduction than Brz-LPs(1 mg/mL) and AZOPT^■(10 mg/mL Brz) in vivo.In conclusion,Brz-LPNs,as promising ocular drug delivery systems,are well worth developing in the future for glaucoma treatment.     

pBPB共价修饰蝮蛇酸性磷脂酶A2的晶体学数据

The Crystals of acidic phospholipase A2 from the venom of Agkistrodon blomhoffii brevicaudus (i.e. Agkistrodon halys pallas) covalently modified with p-bromo-phenacylbromide were obtained by the method of hanging drop vapor diffusion. Crystallization droplet was composed of 0.06mol?L-1 Na(CH3)2AsO2 (pH=6.5), 24.8% (v/v) 1,4-butanediol, and 4.5mg?mL-1 protein. The crystal data are of a=b=82.82?., c=32.85?, space group P61. 8945 unique reflections with 1.93 ? resolution were measured on a Siemens area detector X-ray diffractometor, of which 8069 reflections having F0 >2σ(F). The experimental results show that the crystals are suitable to a structure analysis of high resolution.     

去B链N端二肽(B_(1—2))猪胰岛素晶体结构的研究——单晶培养及X射线晶体学的分析

利用微量过饱和静置法,在柠檬酸缓冲液中培养出可供X射线结构分析用的去B链N端二肽(B_(1-2))猪胰岛素单晶。晶体衍射分辨率达到4.0A以上。晶体属于立方晶系,a=97.43A,空间群为P4_132(或P4_332),每个结晶学不对称单位含两个或三个去B链N端二肽(B_(1-2))猪胰岛素分子。本文对单位晶胞内六聚体之间和二聚体之间可能的堆积方式进行了讨论。     

The further crystallographic refinement of trichosanthin at 2.7A resolution and the comparison among the three molecular structures in two crystal forms

The three-dimensional structure of trichosanthin at 2.7A resolution has been improved further, by refitting one of the C-terminal tails, adjusting 16 residues in the molecular surface regions, discarding some water molecules with high B values, and adjusting weights during the further refinement. The R-factor has been reduced to 18.5% and the r.m.s deviations from ideal geometry are also improved. The structures of the two molecules in the monoclinic asymmetric unit and the only molecule in the orthorhombic asymmetric unit are compared with one another. The main-chain structures for most of the residues in the three molecules are substantially the same. However, the courses of the three C-terminal tails are completely different, and the intermolecular interactions resulting from the particular packing of the molecules in the crystals account for the differences. The strand Be-2 and the preceding B-turn in small domain show large r.m.s. deviations among the three molecules and they are also involved in i     

[Co(N-(3-Aminopropyl)-1,3-propanediamine)(2-(Aminomethyl)pyridine) Cl][ZnCl_4]的一对差向异构体的合成及晶体结构

用过氧化物法合成了 [Co(3,3-tri)(amp)Cl][ZnCl4]的两个经式异构体,晶体结构解析表明两者互为差向异构体。其中反式异构体 (仲氢相对于 Cl)晶体属单斜晶系,空间群 C2/c, a=2.7663(7)nm, b=0.9505(1)nm, c=1.8288(4)nm,β =105.57(2)°, V=4.632(1)nm3, Dc=1.706g· cm-3, Z=8, F000=2432.00,μ (MoKα )=23.51cm-1, R=0.033, Rw=0.041;顺式异构体 (仲氢相对于 Cl)晶体属三斜晶系,空间群, a=1.0790(2)nm, b=1.1749(1)nm, c=0.8920(1)nm,α =90.73(1)°,β =109.573(9)°,γ =80.60(1)°, V=1.0500(2)nm3, Dc=1.71g· cm-3, Z=2, F000=548.00,μ (MoKα )=25.73cm-1, R=0.022, Rw=0.030。两异构体中 Co3＋为六配位,其差异仅表现在 3,3-tri仲胺上氢的取向不同。     

The synthesis and structure of 5-hydroxy-2-methyl-2-(2-pyridinyl)hexahydro-1,3-pyrimidine

The synthesis and the x-ray structure of 5-hydroxy-2-methyl-(2-pyridinyl)hexahydro-1,3-pyrimidine are reported. The compound was prepared by reaction of 2-acetylpyridine and 1,3-diamino-2-hydroxypropane in a 2:1 molar ratio. The colourless crystals are monoclinic, space group P2₁/c with cell parameters, a = 10.385(5), b = 11.171(5), c = 17.415(6)Å, β = 93.05(37)° for Z = 8. The asymmetric unit of the structure is composed of two independent molecules of the compound which are in the chair form and adopt the same conformation with equatorial -OH and -CH₃ groups and axial pyridine substituents. The packing of the molecule seems to be controlled by two independent hydrogen-bonding sequences.     

Hydrothermal Synthesis,Crystal Structure,Spectrum Properties and Quantum Chemical Calculation of a Trinuclear Copper（Ⅱ） Complex with 3-（Pyridin-2-yl）-1,2,4-triazole

A three-dimensional framework copper(Ⅱ) coordination polymer with copper carbonate basic and 3-(pyridin-2-yl)-1,2,4-triazole (Hpt) has been hydrothemally synthesized.The complex (2,C14 H10 CuN8 ·3H2 O) crystallizes in tetragonal,space group P4 2 /n,a=2.08581(12),b=2.08581(12),c=0.72331(4) nm,M r=761.73,V=3.1468(3) nm 3,Dc=1.608 g/cm 3,Z=4,F(000)=1552,GOOF=1.07,R=0.0515 and wR=0.1689.Every asymmetric unit molecular structure of the complex is composed with one copper ion,one and half water molecules and two Hpt molecules.Each copper ion is coordinated with five nitrogen atoms from four Hpt molecules,forming a distorted square pyramidal geometry.The fluorescence spectrum analysis shows that the title complex at room temperature exhibits intense photoluminescence with maximum emission at 450 nm.The quantum chemistry calculation study on the complex has been performed.The stability,some frontier molecular orbital energies and composition characteristics of some frontier molecular orbitals of the complex have been investigated.     

乙酰基二茂铁的晶体和分子结构

乙酰基二茂铁是按付氏酰基化反应制备的,在CH_2Cl_2溶剂中培养得到血红色柱状晶体,经元素分析及结构分析共分子式为C_(12)H_(12)OFe。在CAD4-四园衍射仪上用Mo K_a射线以θ—2θ扫描在3°≤2θ≤56°范围收集衍射数据,经LP因子及经验     

Crystal Structure of D-Valine at the Temperature of 293, 270, 223 and 173K

1 INTRODUCTION D-amino acids are universally present and play different biological roles in various organisms in- cluding those in the human body. Milton[1] has shown that the D and L forms of the enzyme HIV-1 protease were equally affected by the achiral inhi- bitor but displayed reciprocal chiral specificity in their biochemical interactions. D-proteins may also be nonimmunogenic. Senility and some diseases are related to D-amino acids, such as renal disease[2], Alzheimer disease[3…     

The Polymorphs of L‐Phenylalanine

The solid‐state structure of the amino acid phenylalanine (Phe) offers a potential key to understanding the behavior of a large class of important aromatic compounds. Obtaining good single crystals is, however, notoriously difficult. The structure of the common polymorph of Phe, form I, was first reported by Weissbuch et al. (as D ‐Phe) in 1990, but the correctness of the published C2 unit cell with two disordered molecules in the asymmetric unit was later questioned and other space groups suggested. The identity of form I of L ‐Phe is here established to be P2₁ with Z′=4, based on data from a well‐diffracting single crystal grown from an acetic acid solution of the amino acid. A second new polymorph, form IV, together with the two recently described forms II and III provide unprecedented information on the structural complexity of this essential amino acid. It is furthermore documented that the racemate, dl ‐Phe, does not grow proper single crystals.     

Crystal Structure of Nicotinic Acid(3,5-dinitrobenzoic Acid Organic Adduct

The title compound nicotinic acid(3,5-dinitrobenzoic acid(NDNT)has been obtained by the reaction of nicotinic acid with 3,5-dinitrobenzoic acid in deionic water at room temperature.The crystal is of monoclinic,space group P21/n with a=14.053(6),b=5.046(2),c=20.105(8)A,β=103.573(8)°,C13H9N3O8,Mr=335.23,Z=4,V=1385.8(10)A3,Dc=1.607g/cm3,μ(MoKα)=0.137 mm－1,F(000)=688,R=0.0435 and wR=0.0993 for 1239 observed reflections (I>2σ(I)).In the crystals,the asymmetric unit contains one nicotinic acid (C6H5NO2)and one 3,5-dinitrobenzoic acid (C7H4N2O6)molecules which are linked by some hydrogen bonds to form a twenty-membered hydrogen-bonded ring and an extended linear structure.