等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

水解聚合铝溶液中Al5和Al9的制备及初步表征

以相图理论为指导,采用铝粉、水合氯化铝和水为原料,创造氯化铝不断水解的条件,通过调整反应温度、原料配比及溶液碱化度,经蒸发、结晶制成了铝盐水解聚合产物中的两种中间产物：水合氯化五聚铝AlCl3•4Al(OH)3•7.5H2O和水合氯化九聚铝2AlCl3•7Al(OH)3•18H2O,分别采用粉末XRD物相分析、化学分析和IR对其进行了表征.以化学分析为主要监测手段,对AlCl3•4Al(OH)3•7.5H2O和2AlCl3•7Al(OH)3•18H2O形态过程进行了研究,结果表明,温度对于产物的行成及性能有很大的影响,并且反应随温度的变化基本上是一个可逆的过程,同时,实验表明 75℃为AlCl3•4Al(OH)3•7.5H2O和2AlCl3•7Al(OH)3•18H2O析出的最佳温度,该温度下产物的产率较高且结晶状态良好.     

Theoretical Study of Ethanethiol Adsorption on HZSM-5 Zeolite

The density functional theory and the cluster model methods have been employed to investigate the interactions between ethanethiol and HZSM-5 zeolites. Molecular complexes formed by the adsorption of ethanethiol on silanol H3SiOH with two coordination forms, model Bronsted acid sites of zeolite cluster H3Si(OH)Al(OH)2SiH3 interaction with ethanethiol, aluminum species adsorbed ethanethiol have been comparatively studied. Full optimization and frequency analysis of all cluster models have been carried out using B3LYP hybrid method at 3-21G basis level for hydrogen atoms and 6-31G(d) basis set level for silicon, aluminum, oxygen, carbon, and sulfur atoms. The structures and energy changes of different coordination forms of H3Si(OH)Al(OH)2SiH3-ethanethiol, silanol-ethanethiol and Al(OH)3-ethanethiol have been studied. The calculated results showed the nature of interactions was van der Waals force as exhibited by not much change in geometric structures and properties. The preference order of ethanethiol adsorbed on HZSM-5 zeolite may be residual aluminum species, bridging hydroxyl groups and silanol OH groups from the adsorption heat. The adsorbed models of protonized ethanethiol on bridging hydroxyl OH groups and linear hydrogen bonded ethanethiol on bridging OH groups suggested in literature might not exist as revealed by this theoretical calculation. Possible adsorption models were obtained for the first time.     

高频燃烧红外吸收光谱法测定高纯铝粉中碳含量

高纯铝粉在粉末冶金领域应用广泛,其碳含量的高低对材质的物理性能有较大影响,研究快速准确测定高纯铝粉中碳含量方法具有实际意义.采用高频感应燃烧红外碳硫仪测定高纯铝粉中碳含量,优化实验条件,建立高纯铝粉中碳含量测定的高频燃烧红外吸收光谱法.实验表明,称取0.1 g试样,在1980 W分析功率下,按照2.4:0.2:0.2质...     

Synthesis of Mordenite with the Use of Aluminum Sulfate Solutions

A procedure has been developed for synthesis of a mordenite-type zeolite with high phase purity and high dispersity of crystals. The procedure is based on hydrothermal crystallization of aluminum-silicon hydrogels prepared from aluminum sulfate solutions serving as a source of Al(III).     

化学浸提-电感耦合等离子体发射光谱法测定粉条中活性铝的化学形态

采用化学浸提-电感耦合等离子体发射光谱法(ICP-OES)测定粉条中溶出铝的化学形态及其含量.实验结果显示,粉条溶出铝中,Al3+为135 μg/g,Al(OH)2+和Al(OH)2-未检出,胶态Al(OH)3o为143 μg/g,有机铝为460 μg/g.各化学形态铝含量的回收率在88.3％～105％范围,精密度(RSD)为1.14％,方法检出限为0.74 mg/kg.该方法准确度高,精密度好,检出限低,线性关系好,是一种简便实用的食品、药物中活性铝化学形态的检测方法.     

Multinuclear solid-state high-resolution and 13C -{27Al} double-resonance magic-angle spinning NMR studies on aluminum alkoxides

A combination of 27Al magic-angle spinning (MAS)/multiple quantum (MQ)-MAS, 13C-1H CPMAS, and 13C-{27Al} transfer of population in double-resonance (TRAPDOR) nuclear magnetic resonance (NMR) were used for the structural elucidation of the aluminum alkoxides aluminum ethoxide, aluminum isopropoxide, and aluminum tertiarybutoxide. Aluminum alkoxides exist as oligomers with aluminum in different coordinations. High-resolution 27Al MAS NMR experiments with high-spinning speed distinguished the aluminum atoms in different environments. The 27Al MAS NMR spectrum gave well-resolved powder patterns with different coordinations. Z-filter MQ-MAS was performed to obtain the number and types of aluminum environments in the oligomeric structure. 13C-1H CPMAS chemical shifts resolved the different carbon species (-CH3, =CH2, =CH-, and =C=) in the structures. 13C-{27Al} TRAPDOR experiments were employed to obtain relative Al-C dipolar interactions and to distinguish between terminal and bridging alkoxides in the crystallographic structures. The complete characterization of selected aluminum alkoxides using advanced NMR methods has evidenced the tetrameric structure for aluminum isopropoxide and the dimeric structure for aluminum tertiary-butoxide, as reported in the literature, and proposed a polymeric structure for aluminum ethoxide.     

MIL-96, a porous aluminum trimesate 3D structure constructed from a hexagonal network of 18-membered rings and mu3-oxo-centered trinuclear units

A new aluminum trimesate Al12O(OH)18(H2O)3(Al2(OH)4)[btc]6.24H2O, denominated MIL-96, was synthesized under mild hydrothermal conditions (210 degrees C, 24 h) in the presence of 1,3,5-benzenetricarboxylic acid (trimesic acid or H3btc) in water. Hexagonal crystals, allowing a single-crystal XRD analysis, are grown from a mixture of trimethyl 1,3,5-benzenetricarboxylate (Me3btc), HF, and TEOS. The MIL-96 structure exhibits a three-dimensional (3D) framework containing isolated trinuclear mu3-oxo-bridged aluminum clusters and infinite chains of AlO4(OH)2 and AlO2(OH)4 octahedra forming a honeycomb lattice based on 18-membered rings. The two types of aluminum groups are connected to each other through the trimesate species, which induce corrugated chains of aluminum octahedra, linked via mu2-hydroxo bonds with the specific -cis-cis-trans- sequence. The 3D framework of MIL-96 reveals three types of cages. Two of them, centered at the special positions 0 0 0 and 2/3 1/3 1/4, have estimated pore volumes of 417 and 635 A3, respectively, and encapsulate free water molecules. The third one has a smaller pore volume and contains disordered aluminum octahedral species (Al(OH)6). The solid-state NMR characterization is consistent with crystal structure and elemental and thermal analyses. The four aluminum crystallographic sites are resolved by means of 27Al 3QMAS technique. This product is able to sorb both carbon dioxide and methane at room temperature (4.4 mmol.g(-1) for CO2 and 1.95 mmol.g(-1) for CH4 at 10 bar) and hydrogen at 77 K (1.91 wt % under 3 bar).     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

Hydrothermal Synthesis of Porous Al2O3/Al Metal Ceramics: IV. Synthesis of Composite Porous Ceramics in the Presence of Microporous and Mesoporous Adsorbents

The formation of the structure and properties of mesoporous composite ceramics based on an ASD-1 aluminum powder and commercial adsorbent powders (zeolites and active alumina) was studied. It was found that the mechanism of the formation of contacts between the particles of commercial adsorbents and aluminum is analogous to the mechanism of synthesis of an Al(OH)₃/Al composite. The dissolution of aluminum and the precipitation of the hydroxo complexes of aluminum from solution to the region of interparticle contacts are responsible for this mechanism. The resulting composite ceramics exhibited a polydisperse pore structure and high values of mechanical strength, gas permeability, and thermal conductivity; it can be used as a block adsorbent and catalyst support.     

Density Functional Investigation of Methanethiol and Dimethyl Sulfide Adsorption on Zeolite

The density functional theory and cluster model methods have been employed to investigate the interactions between methanethiol, dimethyl sulfide and zeolites. The molecular complexes formed by adsorption of methanethiol or dimethyl sulfide on silanol H3SiOSi(OH)2OSiH3 with five coordination forms or four coordination forms, and complexes formed by interactions of Bronsted acid sites of bridging hydroxyl H3Si(OH)Al(OH)2OSiH3 with methanethiol or dimethyl sulfide have been investigated. Full optimization and frequency analysis of all cluster models have been carried out using the B3LYP hybrid method at 6-31 G (d,p) basis set level for hydrogen, silicon, aluminum, oxygen, carbon, and sulfur atoms. The structures and energy changes of different coordination forms between methanethiol and H3Si(OH)Al(OH)2OSiH3, dimethyl sulfide and H3Si(OH)Al(OH)2OSiH3, methanethiol and H3SiOSi(OH)2OSiH3, dimethyl sulfide and H3SiOSi(OH)2OSiH3 complexes have been comparatively studied. The calculated results showed the nature of interactions that led to the formation of all complexes was van der Waals force confirmed by an insignificant change of geometric structures and properties. The conclusions that methanethiol and dimethyl sulfide molecules were adsorbed on bridging hydroxyl group prior to silanol group were obtained on the basis of adsorption heat, the most stable adsorption models of a 6 ring structure for interaction between bridging hydroxyl and methanethiol, and a 7 ring structure for interaction between bridging hydroxyl and dimethyl sulfide.