Electroosmotic Flow of a General Electrolyte Solution through a Fibrous Medium

Although hydrotropy is extensively used in industry, the molecular mechanism of hydrotropic solubilization has not been completely elucidated yet. In this paper the interaction between a nonionic surfactant (ethoxylated fatty alcohol containing between five and six oxyethylenic units) and sodium p-toluene sulfonate is examined. Surface tension measurements confirm that the hydrotropic effect occurs at a concentration in which the hydrotropes self-associate. Photon correlation spectroscopy studies show that for this concentration of hydrotropes a drastic reduction in the surfactant micellar radius occurs. Furthermore the luminescence of the hydrotrope used as a fluorescence probe indicates that at low concentrations p-toluene sulfonate dissolves in the surfactant micelles but beyond the minimum concentration for hydrotropic solubilization the hydrotrope is present in the aqueous phase. These results suggest that the hydrotropic effect is related to alterations in the water structure induced by the hydrotrope molecules and to the presence of hydrotrope aggregates that furnish an appropriate niche for the surfactant amphiphile.     

纳滤膜对电解质溶液分离特性的理论研究(II): 混合电解质溶液

假定纳滤膜具有狭缝状孔, 使用纯水透过系数、膜孔径及膜表面电势来表征纳滤膜的分离特征, 用流体力学半径和无限稀释扩散系数表征了离子特性. 采用扩展Nernst-Planck方程、Donnan平衡模型和Poisson-Boltzmann理论描述了混合电解质溶液中离子在膜孔内的传递现象, 计算了三种商用纳滤膜(ESNA1-LF, ESNA1和LES90)对同阴离子、同阳离子和含四种离子的混合电解质体系中离子的截留率, 并与实验数据进行了比较. 计算结果表明, 电解质溶液中离子在纳滤膜孔内传递的主要机理是离子的扩散和电迁移, 纳滤膜对混合电解质溶液中离子的分离效果主要由空间位阻和静电效应决定. 该模型在低浓度时对含一价离子的混合电解质溶液通过纳滤膜的截留率计算结果比较准确, 但对高浓度或含高价离子的混合电解质溶液则偏差较大.     

Wetting Study of Hydrophobic Membranes via Liquid Entry Pressure Measurements with Aqueous Alcohol Solutions

A new concept of liquid entry pressure measurements is applied to study the hydrophobicity of microporous membranes for aqueous alcohol solutions. The effects of alcohol concentration, type of alcohol, and temperature on liquid entry pressure of the membrane have been studied. Two theoretical equations for the determination of membrane pore size have been proposed. The former equation was developed taking into account the deviation from the Laplace–Young equation due to the membrane structure by means of the structure angle. The latter equation was established considering only the range of alcohol concentration in which the dispersion component of liquid surface tension remains practically constant. Hydrophobicity has been expressed in terms of wetting surface tension, γ_L^w. Based on these measurements, the maximum concentration before the spontaneous wetting occurs would be predicted.     

Flow of water through channels filled with deformable polymer gels

A mathematical model is developed for the flow of water through a channel impregnated with a polymer gel that is treated as an elastic and deformable porous medium. The model uses a Brinkman equation along with an experimentally observed velocity-dependent permeability. Numerical and approximate analytical solutions are given. These results show that the gel intrinsic properties, i.e., gel reference permeability and elastic index, control the water flow. First, the permeability of water flow through the gel increases with an increase of gel reference permeability. Second, the velocity of water decreases when the gel velocity exponent increases. Our theoretical results show that the velocity-dependent permeability of water flow through polymer gels is in fact an intrinsic property of the gel rather than a property of the channel or some interaction between the gel and the pore walls.     

Electroosmosis through a Cation-Exchange Membrane: Effect of an ac Perturbation on the Electroosmotic Flow

Electroosmosis experiments through a cation-exchange membrane have been performed using NaCl solutions in different experimental situations. The influence of an alternating (ac) sinusoidal perturbation, of known angular frequency and small amplitude, superimposed to the usual applied continuous (dc) signal on the electroosmotic flow has been studied. The experimental results show that the presence of the ac perturbation affects the electroosmotic flow value, depending on the frequency of the ac signal and on the solution stirring conditions. In the frequency range studied, two regions have been observed where the electroosmotic flow reaches a maximum value: one at low frequencies (Hz); and another at frequencies of the order of kHz. These regions could be related to membrane relaxation phenomena.     

纳滤膜对电解质溶液分离特性的理论研究(I): 单一电解质溶液

电解质溶液在纳滤膜中的截留率对于膜法海水淡化和重金属离子的脱除非常重要. 本文假定膜具有狭缝状孔, 采用扩展Nernst-Planck方程、Donnan平衡模型和Gouy-Chapman理论来描述电解质溶液中离子在膜孔内的传递现象. 使用纯水透过系数、膜孔径及膜表面电势来表征纳滤膜的分离特征, 这三个参数可通过Levenberg-Marquardt方法由实验数据关联得到. 本文使用该模型计算了两种商用纳滤膜(NF45和SU200)对1-1型(NaCl, KCl, LiCl), 2-1型(K₂SO₄)和2-2型(MgSO₄)单一电解质溶液的截留率, 并与实验数据进行了比较, 两者吻合较好. 计算结果表明电解质溶液中离子在纳滤膜孔内传递的主要机理是离子的扩散和电迁移, 纳滤膜对电解质溶液中离子的分离效果主要由空间位阻和静电效应决定. 该模型在低浓度时对电解质溶液通过纳滤膜的截留率计算结果较准确, 但对高浓度电解质溶液则偏差较大.     

Effect of structural stress on the intercalation rate of kaolinite

Particle size in kaolinite intercalation showed an inverse reactivity trend compared with most chemical reactions: finer particles had lower reactivity and some of the fine particles cannot be intercalated. Although this phenomenon was noted in the early 1960s and several hypotheses have been reported, there is no widely accepted theory about the unusual particle size response in the intercalation. We propose that structural stress is a controlling factor in the intercalation and the stress contributes to the higher reactivity of the coarser particles. In this study, we checked the structural deformation spectroscopically and indirectly proved the structural stress hypothesis. A Georgia kaolinite was separated into nine size fractions and their intercalations by hydrazine monohydrate and potassium acetate were investigated with X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) analyses. The apical Si-O band of kaolinite at 1115 cm(-1) shifted to 1124 cm(-1) when the mineral was intercalated to 1.03 nm by hydrazine monohydrate, and its strong pleochroic properties became much weaker. Similar reduction in pleochroism was observed on the surface OH bands of kaolinite after intercalation. Both the bending vibrations of the inner OH group at 914 cm(-1) and of the surface OH group at 937 cm(-1) shifted to 903 cm(-1) after intercalation by hydrazine. A new band for the inner OH group appeared at 3611 cm(-1) during the deintercalation of the 1.03 nm hydrazine kaolinite complex. Pleochroism change in the apical Si-O band suggested the tetrahedra had increased tilt with respect to the (001) plane. The tilt of the Si-O apical bond could occur only if the octahedra had also undergone structural rearrangement during intercalation. These changes in the octahedral and tetrahedral sheets represent some change in the manner of compensation for the structural misfit of the tetrahedral sheet and octahedral sheet. As the lateral dimensions of a kaolinite particle increases, the cumulative degree of misfit increases. Intercalation breaks the hydrogen bonds between layers and allows for the structure to reduce the accumulated stress in some other manner. The reversed size effect on intercalation probably was not caused by crystallinity differences as reported in the literature, because the Hinckley and Lietard crystallinity indices of the four clay fractions were very close to each other. Impurities, such as dickite- or nacrite-like phases are not significant in the studied sample as suggested by the XRD and IR results, they are not the main reasons for the lower reactivity of the finer particles.     

Fluidification of Concentrated Aqueous Colloidal Silica Suspensions by Adsorption of Low-Molecular-Weight Poly(ethylene oxide)

This paper deals with the effect of different low-molecular-weight poly(ethylene oxide)s on the rheology of concentrated aqueous colloidal silica suspensions (volume fraction >0.2) with the aim of obtaining well-dispersed media. Results are correlated with the physico-chemical characteristics of the systems that govern the ranges of the various operating interactions, i.e., mainly surface coverage, molecular weight of the polymer, and ionic strength of the medium. Optimization of the fluidification occurs to be strongly linked to these parameters. An unexpected effect of free polymer bulk concentration leads to improved fluidification when the characteristic lengths of the system are correctly adjusted; it has been interpreted in the frame of recent theories.     

Adsorption of 1,4-Benzenedithiol on Gold and Silver Surfaces: Surface-Enhanced Raman Scattering Study

The adsorption behavior of 1,4-benzenedithiol (1,4-BDT) on colloidal gold and silver surfaces has been investigated by means of surface-enhanced Raman scattering (SERS). 1,4-BDT chemisorbed dissociatively on both gold and silver surfaces but as mono- and dithiolate, respectively. Regardless of the bulk concentration of 1,4-BDT, only a monolayer was assembled on the silver surface with a flat orientation by forming two Ag–S bonds. On the gold surface, the monothiolate species,1,4-BDT⁻¹, appeared to assume a rather flat orientation at a very low surface coverage, but as the surface coverage was increased, the adsorbate took a perpendicular orientation. Furthermore, when the bulk concentration of 1,4-BDT was close to that required for a full-monolayer coverage limit, a band assignable to the S–S stretching vibration appeared at 536 cm⁻¹ in the gold sol SERS spectra. A separate ellipsometry measurement performed with vacuum-evaporated gold substrates revealed that up to tetralayers could be assembled on gold in 1 mM n-hexane solution of 1,4-BDT while at best a bilayer formed in either methanol or ethanol solution. The different adsorbate structure of 1,4-BDT on gold and silver was overall quite comparable to that of p-xylene-α,α′-dithiol.     

Rheology and Permeability of Crosslinked Polyacrylamide Gel

Gels produced by crosslinking polyacrylamide solutions with chromium (III) have been characterized by dynamic rheology studies. To vary the gel strength, different polymer concentrations were used, while keeping the temperature, salinity, and crosslinker concentration constant. Both the loss and storage moduli increased with the polymer concentration for this gel system. The storage modulus at the end of the gelation was used to characterize the gel strength. Steady-state water flow experiments through gel-filled capillary tubes were performed, with the aim of linking the gel strength and flow behavior. The permeability was found to be a function of the water flow rate (velocity) and polymer concentration. Two parameters were used to characterize the flow behavior, intrinsic gel permeability and elasticity index, which are each functions of the polymer concentration. However, only one parameter is needed to fully identify the flow and rheological gel properties, as the elasticity index and storage modulus are linked by a power-law relationship. The loss modulus and intrinsic permeability are correlated with the storage modulus and elasticity index, respectively. A theoretical model for this behavior linking both gel properties based on the dual domain structure was used to demonstrate that the flow and rheological behavior of the gel are indeed related and that the gel strength controls the water permeability. Implications for prediction of flow of water through gels emplaced in a porous medium are discussed.     

Thermodynamic quantities of surface formation of aqueous electrolyte solutions. V. Aqueous solutions of aliphatic amino acids

The surface tension of aqueous solutions of glycine, L-alanine, L-valine, and L-leucine has been observed using the drop volume method as a function of temperature and concentration. The L-leucine molecules form an adsorbed film, while glycine affects the water surface in accordance with simple salts which dissociate into cations and anions completely. The surface tension data have been analyzed in view of K. Motomura's thermodynamic treatment (J. Colloid Interface Sci.64, 348 (1978)), and the thermodynamic quantities relevant to the surface have been shown systematically.     

Influence of Sodium Periodate and Tyrosinase on Binding of Alginate to Adlayers of Mytilus edulis Foot Protein 1

Mytilus edulis foot protein 1 (Mefp-1) is the most well-characterized component of this sea mussel's adhesive plaque. The plaque is a condensed, heterogeneous mixture consisting of a large proportion of cross-linked biopolymers that bonds the mussel to a chosen mooring. Mefp-1 is densely populated with lysine and -3,4-dihyroxyphenylalanine ( -dopa) residues incorporated into a repeating amino acid sequence motif. It has been proposed that one plaque cross-linking reaction is the nucleophilic addition of the ε-amino groups of the lysine residues into the oxidized catechol (o-diphenol) functionality (quinone) of the -dopa residues. In order to determine if this reaction occurs in adlayers of Mefp-1, a previously developed assay for ε-amino groups was applied. Adlayers of Mefp-1 were exposed to an oxidant, either the enzyme, mushroom tyrosinase, or sodium periodate. Binding of alginate to adlayers was used to probe for accessibility of ε-amino groups. It was found that lysine residues lose the ability to bind alginate after exposure to sodium periodate, but that this loss is not clearly due to a reaction with -dopa residues. There is a slight decrease of binding of alginate to adlayers of Mefp-1 exposed to either active or thermally deactivated mushroom tyrosinase, probably due to the obstruction of binding sites by bound enzyme. Adsorption kinetics of mushroom tyrosinase onto adlayers of Mefp-1 for active and thermally inactivated enzyme were nearly identical. Attenuated total reflection Fourier transform infrared spectroscopy was used to characterize these interactions at a germanium (Ge) interface.     

Assembly of Alternated Multivalent Ion/Polyelectrolyte Layers on Colloidal Particles. Stability of the Multilayers and Encapsulation of Macromolecules into Polyelectrolyte Capsules

Alternating adsorption of multivalent ions and oppositely charged polyelectrolytes on colloid particles has been investigated. Multilayer films composed of Tb³⁺/polysterene sulfonate (PSS) and 4-pyrene sulfate/polyallylamine (PAH) were successfully assembled on polysterene sulfonate (PS) and melamine formaldehyde (MF) latex particles. The amount of assembled material was estimated by fluorescence and the linear growth of the film versus the number of layers was demonstrated. These multilayers are not stable and can be decomposed by salt and temperature. Dissolution of MF particles leads to formation of hollow capsules consisting of multivalent ion/polyelectrolyte multilayers. Comparative analysis of the capsules was done by confocal and scanning force microscopy. Complex hollow spheres consisting of Tb³⁺/PSS or 4-PS/PAH as an inner shell and stable PSS/PAH as an outer shell were produced. Due to selective permeability of the outer shell after degradation of the inner shell the multivalent ions are released out of the capsule while the polyelectrolytes fill the capsule interior. This is indicative of swelling of the capsule by osmotic pressure. The filled capsules were studied by confocal and scanning electron microscopy. Possibilities of encapsulating macromolecules in defined amounts per capsule are discussed.     

Efficient Photocatalytic Degradation of Environmental Pollutants with Mass-Produced ZnS Nanocrystals

Photocatalytic degradation of water pollutants using nanometersized semiconductor colloids is an emerging area of environmental remediation. The synthesis of semiconductor nanocrystals (NCs), however, can be costly and result in low product yields. For large-scale photocatalytic application in environmental remediation, cost-effective production of the semiconductor NCs would be ideal. Demonstrated in this report is the efficient photocatalytic degradation of p-nitrophenol (pNP) and Acid Orange 7 (AO7) using ZnS nanocrystals (3 to 5 nm diameter) produced in gram quantities with >50% product yield. The pNP half-life in ZnS nanocrystal photocatalyzed reactions was about 1.95 to 2.45 min, whereas in comparable TiO₂ reactions, the pNP half-lives were in the range of 12 to 15 min. Absorption spectra of the photocatalysis reactions suggested the decolorization of pNP without any noticeable formation of phenolic intermediates, implying a mechanism that involves a pNP ring opening via a radical mediated attack. Likewise, the degradation of AO7 was suggested to occur via an oxidative pathway involving hydroxyl radicals formed at the photocatalyst/liquid interface. Optimum conditions for AO7 degradation such as pH, photocatalyst-to-AO7 ratio, and photocatalyst surface passivation were similar to those for pNP. By demonstrating efficient mineralization of these model pollutants using mass-produced ZnS nanocrystals, we hope to lay the foundations necessary for development of large-scale, field-applicable systems.     

Substituent Effects on Binding Constants of Carotenoids to n-Heptane/AOT Reverse Micelles

The absorption spectra of 6′-apo-β-caroten-6′-ol (1), 6′-apo-β-caroten-6′-oic acid (2), and ethyl 6′-apo-β-caroten-6′-oate (3) were analyzed in homogeneous media and in reversed micelles of AOT (sodium 1,4-bis(2-ethylhexyl) sulfosuccinate) in n-heptane. The possible solute–solvent interactions of these compounds were analyzed in pure solvents by Taft and Kamlet's solvatochromic comparison method. These carotenoids show sensitivity similar to that of medium polarity-polarizability as measured by π*. Moreover, the absorption spectra of carotenoid 3 and to much less extent carotenoid 2 display broadening of the visible bands induced by polar solvents characteristic of carotenoids that contain a carbonyl functional group in conjugation with the carbon–carbon π-electron system. They are also sensitive to the ability of the solvent to accept protons in a hydrogen bond interaction measured by β. This sensitivity follows the expected order: 2>1>3. In the reverse micellar system, while the spectra for 3 remain unchanged, the intensity of the absorption band characteristic of n-heptane for 1 and 2 decreases as the AOT concentration increases, and a new band develops. This new band is attributed to the solute bound to the micelle interface. These changes allowed us to determine the binding constant (K_b) between these compounds and AOT. At W₀=[H₂O]/[AOT]=0 the values of K_b of 326±5 and 6.2±0.3 were found for the acid 2 and the alcohol 1, respectively. The strength of binding is interpreted considering their hydrogen-bond donor ability and the solubility in the organic pseudophase. For 1K_bdecreases as W₀ is increased, while for 2 no variation was observed. These effects are discussed in terms of carotenoid–water competition for interfacial binding sites.     

Use of the Gaussian Distribution Function as a Tool to Estimate Continuous Heterogeneity in Adsorbing Systems

In environmental engineering, adsorption and desorption are phenomena commonly referred to as responsible for pollution dispersion, retention, or retardation in soils, aquifers, and hydrologic systems. They are also used to remove organic pollutants from water or odorous compounds in gas deodorization. Most often, the characterization of the aqueous adsorption systems that are of engineering interest involves a narrow adsorbate concentration range and low values of the adsorbate concentration. The practice is to use the Freundlich equation that best fits most data and is considered sufficient to design adsorption contactors. However, no physical or chemical meaning can be associated with the values taken by the parameters. The present paper gives a new way of analyzing adsorption data, using an extension of the Freundlich equation and the Gaussian distribution function that makes it possible to associate parameter values of this extension with the adsorbate–adsorbent normal interaction energy, its heterogeneity, and to some extent the adsorbate–adsorbate lateral interaction energy.     

Adsorption of Amphiphilic Dimers at Surfaces

Adsorption of amphiphilic dimers is analyzed in the framework of density functional Ono–Kondo theory. There are three configurations for dimers absorbed at a surface: one parallel to the surface and two perpendicular to the surface (AB and BA, with A or B touching the surface, respectively). Densities of molecules in each configuration are calculated from density functional theory and compared to Monte Carlo simulation data. There is good agreement between theory and simulations. It is shown that the parallel configuration is preferred over the perpendicular configuration, except when there are very strong asymmetries in intermolecular forces. In most cases, the parallel configuration is even preferred over the combination of the two perpendicular configurations.     

Thermodynamics of micellization of alkyldimethylbenzylammonium chlorides in aqueous solutions

Specific conductivities of alkyldimethylbenzylammonium chlorides (alkyl=decyl-, dodecyl-, tetradecyl-, and hexadecyl-) in aqueous solutions were measured as a function of molality and temperature. Critical micelle molalities (cmc) and degrees of ionization of the micelles, beta, were estimated from the dependence of the specific conductivity on molality. It was found that temperature dependence of cmc is U-shaped with a minimum shifting toward higher temperatures with a decrease in the chain length of the alkyl group. The temperature dependence of ln xcmc (where xcmc is the cmc in mole fraction units) was fitted to the equation of Muller, which we modified by taking into account the temperature dependencies both of beta and of change in heat capacity upon micellization. From the fitting parameters, Gibbs free energies, enthalpies, and entropies of micellization as a function of temperature were estimated.     

Molecular Interactions in Mixed Monolayers of Octadecanoic Acid and Three Related Amphiphiles

Binary mixed monolayers of octadecanoic acid and three related amphiphilic compounds (octadecanamide, octadecylamine, octadecylurea) have been investigated at the air/water interface by surface pressure–area (Π–Â) isotherms and their resistances to water evaporation (r). In addition, the excess free energies of mixing (ΔG^E) were calculated using the Goodrich method. Both the ln r vs x and ΔG^E vs x plots exhibit marked deviations from linearity, indicating a high degree of miscibility and nonideal behavior of the components in the mixed films. For all of these binary systems the excess free energies of mixing have been found to be minimum for a certain composition corresponding almost to a maximum in evaporation resistances. Weak interactions were detected in octadecanoic acid/octadecanamide monolayers, whereas significant condensation effects were observed in 1 : 1 mixed films containing octadecanoic acid and octadecylamine. This is attributed to an acid–base equilibrium followed by the formation of a well-ordered arrangement of COO⁻ and NH₃⁺ head groups bound to each other by electrostatic forces. The unusual polymorphism of octadecylurea monolayers could be influenced by adding small amounts of octadecanoic acid. The formation of the low-temperature phase (β-phase) is completely suppressed, if the acid content exceeds 8 mol%. The octadecanoic acid seems to induce the formation of the high-temperature phase (α-phase), which is characterized by a vertical orientation of the hydrocarbon chains.