共查询到20条相似文献,搜索用时 78 毫秒
1.
受热炸药的冲击起爆特征 总被引:2,自引:0,他引:2
设计了炸药驱动飞片起爆受热炸药的实验装置,该装置既能够对实验炸药进行均匀地加热,又能够避免高温对加载炸药的影响。利用设计的实验装置对PBXC10炸药(HMX/TATB复合炸药)进行了14、100、140、160和180 ℃等5种不同加热温度下的冲击起爆实验,测量了该炸药内部压力的成长历程。采用点火增长反应速率方程对PBXC10炸药冲击起爆进行了数值模拟。根据实验结果,标定了不同温度下PBXC10炸药的点火增长模型参数,并给出了模型参数随温度变化的关系式,获得了不同温度下炸药的Pop关系。研究结果表明:PBXC10炸药的冲击波感度随温度的升高而升高,但与HMX炸药相比,其冲击波感度对温度的敏感性明显降低,这是因为PBXC10炸药中的TATB具有较好的降感作用。 相似文献
2.
提出了多元混合PBX炸药孔隙塌缩热点模型新的处理方法,构建了新的细观反应速率模型,系列数值模拟结果与实验结果均一致,表明该细观反应速率模型可较好地描述和预测炸药组分配比及颗粒度对多元混合PBX炸药冲击起爆过程的影响。PBX炸药冲击起爆过程主要受热点点火过程和燃烧反应过程共同作用:HMX占主导成分的PBXC03炸药,起爆压力低,冲击起爆过程受热点点火影响较明显,热点点火后的燃烧反应速度较快,表现为加速反应特性;TATB占主导成分的钝感PBXC10炸药,起爆压力高,冲击起爆过程主要受点火后的燃烧反应过程控制,且点火后燃烧反应速度较慢,表现为稳定反应特性。 相似文献
3.
炸药撞击感度和热安全性是评价炸药安全性能的重要指标。为了对高温下炸药撞击敏感性变化规律进行可靠预测,本文中通过数值模拟,研究不同预加热温度下带壳PBX炸药装药在小弹丸低速撞击下的热力学响应,得到炸药点火前至点火阶段局部高温区的位置、形态、温度和应变随时间在炸药中分布的变化。结果显示,炸药发生点火的撞击阈值速度与烤燃温度的关系并非单一随温度升高而降低,而是在加热至348.15 K时达到最高;根据温度和应力应变云图分析可得,随着烤燃温度的提高,炸药强度下降,PBX炸药装药局部高温区快速升温的主导因素由局部剪切变为压缩。热软化对炸药的撞击敏感性起重要作用。 相似文献
4.
5.
2~#炸药[重(,,-三硝基乙基-N硝基)乙二胺]是一个零氧平衡的高能炸药。在2~#炸药中混入少量HMX,以氟橡胶粘结,以TATB、石墨和石腊组成的复合钝感剂来钝感,得到了撞击感度和摩擦感度较低的B-01炸药配方。配方组成为2~#炸药/HMX/TATB/氟橡胶/聚苯乙稀/石墨/石腊=70/22/4/2/0.5/0.5/1。 该配方的特点是冲击波感度很高,很容易用2mm直径的柔爆索起爆。其撞击感度与TNT相当(4%),摩擦感度低于14%,爆轰能量相当于PBX-9404,而且容易在低比压下制成不同形状,因此它适用于某些特殊用途的装药。 相似文献
6.
对单质炸药受低速撞击的力学和化学响应研究,是进行炸药敏感性评价的基础。利用配备了光学观测的落锤撞击装置,实现了频率为1.5×105 s-1的实时观测,不但可以区分样品的“爆”或“不爆”,而且可以获取RDX和HMX颗粒炸药受落锤低速撞击变形、破碎、溅射、点火和燃烧随时间演化的特征。结果表明:RDX颗粒是在液相中点火,而HMX颗粒在固相中点火; 燃烧反应前常常发生剧烈的溅射现象,溅射是由气相反应产物释放能量推动破碎的颗粒所致。对比了单个和单层颗粒炸药响应的特点,多个颗粒由于热点密集和破碎后相互作用,其燃烧反应比单个颗粒燃烧反应更剧烈。根据图像处理估算燃烧波传播速度,很好地表征了样品宏观燃烧反应的剧烈程度。 相似文献
7.
8.
9.
塑料粘结炸药(PBX)的机械撞击感度远低于单纯炸药,这因为塑料包覆层改进了炸药晶体表面性质。本工作研究了含有燃烧向爆炸转变(DDT)抑制剂-三苯甲醇(TPC)对于黑索今(RDX)的机械感度影响,发现含TPC的RDX撞击感度低于不含TPC的。塑料粘结剂改进,并降低在撞击时热点产生的概率(P4),而TPC则降低热点传播的概率(P2)。可以预期含有TPC类型化合物的PBX机械感度可能会大幅度地降低。 相似文献
10.
利用金属箔电爆炸驱动聚酯薄膜飞片产生短脉冲冲击波的加载技术(电炮),依据DRM(Delayed Robbins-Monro)实验程序,研究了炸药TATB/粘结剂在各种激励条件下的短脉冲冲击起爆特性,获得了其50%起爆概率条件下的短脉冲冲击起爆阈值,及实验条件下其短脉冲冲击起爆判据为:lnp=0.205-0.87lnτ。并与相同条件下TATB/HMX为基的高聚物粘结炸药的短脉冲冲击起爆阈值进行了比较。结果表明飞片面积和压力脉宽均对炸药的短脉冲冲击起爆阈值有重要影响,与TATB/HMX为基的高聚物粘结炸药相比,TATB/粘结剂更钝感。 相似文献
11.
特别说明:对科学问题悬赏的多少并不重要,悬赏只不过是为科研生活增加点趣味,为饭后增加点谈资。另外出题人不负责提供如何解答。同时欢迎追加悬赏金额。
力学作为最古老的科学学科之一,在20
世纪得到了很大的发展,这包括有限元提出、断裂力学、生物力学的创立、稳定分岔和混沌理论、边界层理论、塑性力学和位错理论、湍流统计理论、奇异摄动理论、力学的公理化体系、克服声障和热障等,力学的确可以并且解决了大量的科学和工程实际问题。但是,力学是发展的科学,有些看起来简单的问题,有时求解并非容易。
为了鼓励创新,特别提供以下二个问题向对力学有兴趣的所有学者悬赏求解。
【1】 武际可问题:在徐秉业先生主编的《身边的力学》,北京大学出版社(1997
)中有武先生写的一篇文章:"从土豆的内伤谈起-漫谈接触问题"提出的一个问题:一个均匀的弹性球,从某一高度在重力作用下,(1
)落到均匀的弹性半空间上,它的弹跳高度是多少?(2)落到均匀的弹塑性半空间上,它的弹跳高度是多少?
【2】 打鸡蛋问题:二个完全相同的鸡蛋,一个运动的鸡蛋碰撞一个静止的鸡蛋,请问那个鸡蛋更容易破? 相似文献
12.
Han Chen Kaimin Wang Hongsheng Liu Shengqiang Shen 《International Journal of Computational Fluid Dynamics》2013,27(5):222-233
ABSTRACTThe coupled level set and volume of fluid method is applied to the numerical study on the successive impact of double droplets on a super-hydrophobic tube. The impact velocity varies from 0.25 to 2?m/s. These impact processes present spread, retract, rebound, breakup and splash. The out-of-phase impact takes place with the impact velocity from 0.25 to 1.25?m/s, while the in-phase impact takes place with the impact velocity from 1.44 to 2?m/s. With the impact velocity larger than 1.25?m/s, the liquid crown presents and deforms after the trailing droplet impact, then it would gather at the film edge, rebound or break up. When impact velocities range from 1.44 to 1.5?m/s, the finger liquid film presents before the liquid crown appearing. The finger head breaks with the impact velocity of 1.5?m/s during the leading droplet spreading. The zigzag liquid film becomes more obvious for larger velocities. 相似文献
13.
The to and fro motion of a bouncing ball on a flat surface is represented by a low-dimensional model. To describe the repeated reversals of the horizontal velocity of the ball, the elasticity of the ball has to be taken into account. We show that a simple fly-wheel model exhibits the observed hither and thither motion of elastic balls. The suggested model is capable of describing oblique impacts of spherical bodies, which can be important in many applications, including dynamical simulation of granular materials. We find that the behaviour of the bouncing fly-wheel is sensitive to the initial conditions, and the escape time plots are used to illustrate this observation. 相似文献
14.
15.
In this paper, experimental studies are carried out on the buckling of circular cylindrical thin shells under impact torque. Experiments of impact buckling are made on a Hopkinson torsional bar. The torsional bar gives a step torque on the shells. Through an analysis of the strain-time curve obtained in experiment, the dynamic buckling critical torqueM
er
and buckling waves numbern of the shell with different geometric data and some qualitative results are obtained. The buckling behavior of circular cylindrical thin shells under static and impact torque is compared. 相似文献
16.
《国际流体数值方法杂志》2009,61(3):i-i
The International Journal for Numerical Methods in Fluids has received its 2008 impact factor. The impact factor for 2008 has been published to be 0.916, an increase from 0.712 in 2007. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
17.
18.
By using the formula derived in Part ( Ⅰ ), the instant response of an unrestrained planar frame structure subjected to the impact of a moving rigid-body are evaluated and analysed. The impact force-time history between the structure and the moving rigid-body, shear force and bending moment distribution along the beams, axial force distribution along the bars were calculated. The wave propagation phenomena of the longitudinal wave in the bars, the flexural and shear waves in the beams were also analysed. The numerical results show that the time duration of impact force is controlled by the flexural wave and the longitudinal wave ; the shear effect in beams should not be neglected in the impact response analysis of structures. 相似文献
19.
圆柱形薄壳冲击扭转屈曲的实验研究 总被引:1,自引:0,他引:1
本文对受冲击扭矩作用下的圆柱形簿壳扭转屈曲进行了实验研究,利用Hopkinson扭杆使圆柱受阶跃扭矩作用,分析所得到的应变-时间曲线,得到了不同几何参数的圆柱壳的冲击临界扭矩Mder和屈曲波数n及几条定性结论,同时找出了圆柱壳静力扭转屈曲行为和冲击扭转屈曲行为之间的异同。 相似文献