Nonionic diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains: thermotropic and lyotropic liquid crystalline phase behaviour

The thermotropic and lyotropic liquid crystalline phase behaviour of a series of diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains (geranoyl, H-farnesoyl, and phytanoyl) has been investigated. When neat, both H-farnesoyl and phytanoyl diethanolamide form a smectic liquid crystalline structure at sub-zero temperatures. In addition, all three diethanolamides exhibit a glass transition temperature at around -73 °C. Geranoyl diethanolamide forms a lamellar crystalline phase with a lattice parameter of 17.4 ? following long term storage accompanied by the loss of the glass transition. In the presence of water, H-farnesoyl and phytanoyl diethanolamide form lyotropic liquid crystalline phases, whilst geranoyl diethanolamide forms an L(2) phase. H-farnesoyl diethanolamide forms a fluid lamellar phase (L(α)) at room temperature and up to ～ 40 °C. Phytanoyl diethanolamide displays a rich mesomorphism forming the inverse diamond (Q(II)(D)) and gyroid (Q(II)(G)) bicontinuous cubic phases in addition to an L(α) phase.     

Cubic, sponge, and lamellar phases in the glyceryl monooleyl ether-propylene glycol-water system

The phase behavior of 1-glyceryl monooleyl ether (GME) in mixtures of propylene glycol (PG) and water was investigated by visual inspection, polarization microscopy, small-angle X-ray diffraction, and conductance measurements. A phase diagram, based on over 200 samples of the ternary system GME-PG-water, was constructed at 20 degrees C. Without PG, GME forms a reverse micellar phase with up to 10 wt % water and a reverse hexagonal liquid-crystalline phase between 10 and 25 wt % water, a phase that can coexist with excess water. If PG is added in amounts exceeding about 10 wt %, then cubic and lamellar liquid-crystalline phases start to form. A cubic phase, belonging to space group Pn3m, can coexist with excess PG-water mixtures. If even more PG is added, then the cubic phase is transformed into a sponge phase. A lamellar phase forms at water contents between 10 and 15 wt % and with widely differing PG/GME weight ratios. We postulate that the phase behavior is caused by the fact that PG makes the interfacial region between self-assembled GME and PG-water less negatively curved, which in turn allows for the formation of the new phases. The phase behavior obtained for the GME system shows a striking similarity with the phase behavior of the corresponding system in which the GME has been replaced by the ester, 1-glycerol monooleate (GMO), differing only in one extra carbonyl oxygen. The major difference is the lower amount of water present in the GME phases, an effect that is mainly due to the more hydrophobic character of GME compared to that of GMO.     

Chelating DTPA amphiphiles: ion-tunable self-assembly structures and gadolinium complexes

A series of chelating amphiphiles and their gadolinium (Gd(iii)) metal complexes have been synthesized and studied with respect to their neat and lyotropic liquid crystalline phase behavior. These amphiphiles have the ability to form ion-tunable self-assembly nanostructures and their associated Gd(III) complexes have potential as magnetic resonance imaging (MRI) contrast enhancement agents. The amphiphiles are composed of diethylenetriaminepentaacetic acid (DTPA) chelates conjugated to one or two oleyl chain(s) (DTPA-MO and DTPA-BO), or isoprenoid-type chain(s) of phytanyl (DTPA-MP and DTPA-BP). The thermal phase behavior of the neat amphiphiles was examined by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and cross polarizing optical microscopy (POM). Self-assembly of neat amphiphiles and their associated Gd complexes, as well as their lyotropic phase behavior in water and sodium acetate solutions of different ionic strengths, were examined by POM and small and wide angle X-ray scattering (SWAXS). All neat amphiphiles exhibited lamellar structures. The non-complexed amphiphiles showed a variety of lyotropic phases depending on the number and nature of the hydrophobic chain in addition to the ionic state of the hydration. Upon hydration with increased Na-acetate concentration and the subtle changes in the effective headgroup size, the interfacial curvature of the amphiphile increased, altering the lyotropic liquid crystalline structures towards higher order mesophases such as the gyroid (Ia3d) bicontinuous cubic phase. The chelation of Gd with the DTPA amphiphiles resulted in lamellar crystalline structures for all the neat amphiphiles. Upon hydration with water, the Gd-complexed mono-conjugates formed micellar or vesicular self-assemblies, whilst the bis-conjugates transformed only partially into lyotropic liquid crystalline mesophases.     

Phase behavior of the lecithin/water/isooctane and lecithin/water/decane systems

The isothermal pseudo-ternary-phase diagram was determined at 25 degrees C for systems composed oflecithin, water, and, as oil, either isooctane or decane. This was accomplished by a combination of polarizing microscopy, small-angle X-ray scattering, and NMR techniques. The lecithin-rich region of the phase diagram is dominated by a lamellar liquid-crystalline phase (Lalpha). For lecithin contents less than 60% and low hydration (mole ratio water/lecithin = W0 < 5.5), the system forms a viscous gel of branched cylindrical reverse micelles. With increase in the water content, the system phase separates into two phases, which is either gel in equilibrium with essentially pure isooctane (for lecithin < 25%) or a gel in equilibrium with Lalpha (for lecithin > 25%). These two-phase regions are very thin with respect to water dilution. For 8 < W0 < 54 very stable water-in-oil emulsions form. It is only after ripening for more than 1 year that the large region occupied by the emulsion reveals a complex pattern of stable phases. Moving along water dilution lines, one finds (i) the coexistence of gel, isooctane and Lalpha, (ii) equilibrium between reverse micelles and spherulites, and, finally, (iii) disconnected reverse micelles that fail to solubilize water for W0 > 54. This results in a Winsor II phase equilibrium at low lecithin content, while for lecithin > 20% the neat water is in equilibrium with a reverse hexagonal phase and an isotropic liquid-crystalline phase. The use of the decane as oil does not change the main features of the phase behavior.     

Phase behavior of binary mixture of 1-dodecyl-3-methylimidazolium bromide and water revealed by differential scanning calorimetry and polarized optical microscopy

Phase behavior of aqueous mixture of imidazolium ionic liquid, 1-dodecyl-3-methylimidazolium bromide, was investigated by means of differential scanning calorimetry and polarized optical microscopy. The mixture forms two types of lyotropic liquid-crystalline gels, one is composed of lamellar phase and the other is of hexagonal phase. T-X phase diagram of the mixture was constructed, which defines the regions of various phases appearing in this mixture.     

Lamellar miscibility gap in a binary catanionic surfactant-water system

The coexistence of two lamellar liquid-crystalline phases in equilibrium for binary surfactant-water systems is a rare and still puzzling phenomenon. In the few binary systems where it has been demonstrated experimentally, the surfactant is invariably ionic and the miscibility gap is thought to stem from a subtle balance between attractive and repulsive interbilayer forces. In this paper, we report for the first time a miscibility gap for a catanionic lamellar phase formed by the surfactant hexadecyltrimethylammonium octylsulfonate (TASo) in water. Synchrotron small-angle X-ray scattering, polarizing light microscopy, and 2H NMR unequivocally show the coexistence of a dilute (or swollen) lamellar phase, Lalpha', and a concentrated (or collapsed) lamellar phase, Lalpha' '. Furthermore, linear swelling is observed for each of the phases, with the immiscibility region occurring for 15-54 wt % surfactant. In the dilute region, the swollen lamellar phase is in equilibrium with an isotropic micellar region. Vesicles can be observed in this two-phase region as a dispersion of Lalpha' in the solution phase. A theoretical cell model based on combined DLVO and short-range repulsive potentials is presented in order to provide physical insight into the miscibility gap. The surfactant TASo is net uncharged, but it undergoes partial dissociation owing to the higher aqueous solubility of the short octylsulfonate chain. Thus, a residual positive charge in the bilayer is originated and, consequently, an electrostatic repulsive force, whose magnitude is dependent on surfactant concentration. For physically reasonable values of the solubility of the octyl chain, assumed to be constant with surfactant volume fraction, a fairly good agreement is observed between the experimental miscibility gap and the theoretical one.     

PHYSICAL STRUCTURE AND PHASE PROPERTIES OF AQUEOUS SYSTEMS OF LIPIDS FROM RYE AND TRITICALE IN RELATION TO WHEAT LIPIDS

In connection with studies of technical functionality of lipids in cereals, the aqueous systems of lipids from rye and tri-ticale flour are described and compared to different wheat culti-vars. Rye lipids give a lamellar liquid-crystalline phase with very small ordered regions, and this phase is continuously changed into an L2-phase with increasing water content. Triticale lipids exhibit phase equilibria in between lipids of wheat and of rye. Evidence is given for a significant role of the lamellar liquid--crystalline phase with regard to technical functionality when the cereal flour is worked in water to give a dough.     

Vesicle and bilayer formation of diphytanoylphosphatidylcholine (DPhPC) and diphytanoylphosphatidylethanolamine (DPhPE) mixtures and their bilayers' electrical stability

Lipid bilayers are of interest in applications where a cell membrane mimicking environment is desired. The performance of the lipid bilayer is largely dependent on the physical and chemical properties of the component lipids. Lipid bilayers consisting of phytanoyl lipids have proven to be appropriate choices since they exhibit high mechanical and chemical stability. In addition, such bilayers have high electrical resistances. Two different phytanoyl lipids, 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) and 1,2-diphytanoyl-sn-glycero-3-phosphoethanolamine (DPhPE), and various combinations of the two have been investigated with respect to their behavior in aqueous solutions, their interactions with solid surfaces, and their electrical stability. Dynamic light scattering, nuclear magnetic resonance diffusion, and cryogenic transmission electron microscopy measurements showed that pure DPhPC as well as mixtures of DPhPC and DPhPE consisting of greater than 50% (mol%) DPhPC formed unilamellar vesicles. If the total lipid concentration was greater than 0.15g/l, then the vesicles formed solid-supported bilayers on plasma-treated gold and silica surfaces by the process of spontaneous vesicle adsorption and rupture, as determined by quartz crystal microbalance with dissipation monitoring and atomic force microscopy. The solid-supported bilayers exhibited a high degree of viscoelasticity, probably an effect of relatively high amounts of imbibed water or incomplete vesicle fusion. Lipid compositions consisting of greater than 50% DPhPE formed small flower-like vesicular structures along with discrete liquid crystalline structures, as evidenced by cryogenic transmission electron microscopy. Furthermore, electrophysiology measurements were performed on bilayers using the tip-dip methodology and the bilayers' capacity to retain its electrical resistance towards an applied potential across the bilayer was evaluated as a function of lipid composition. It was shown that the lipid ratio significantly affected the bilayer's electrical stability, with pure DPhPE having the highest stability followed by 3DPhPC:7DPhPE and 7DPhPC:3DPhPE in decreasing order. The bilayer consisting of 5DPhPC:5DPhPE had the lowest stability towards the applied electrical potential.     

Design,synthesis, and characterization of a combined main-chain/side-chain liquid-crystalline polymer based on ethyl cellulose

A novel combined main-chain/side-chain liquid-crystalline polymer based on an ethyl cellulose main chain containing azobenzene mesogens (AzoEC) was successfully synthesized. Molecular characterization of the resulting polymers with different degrees of substitution (DS) was performed with proton nuclear magnetic resonance (¹H NMR), Fourier-transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). Thermal stability was investigated by thermogravimetric analysis (TGA). The phase transitions and liquid-crystalline behavior of these polymers were investigated by differential-scanning calorimetry (DSC), polarized optical microscopy (POM), and wide-angle X-ray diffraction (WAXD). The results indicate that DS has substantial effect on the liquid-crystalline behavior of these polymers. AzoEC with low DS only shows the cholesteric phase similar to ethyl cellulose (EC). However, when DS increases to a specific value, AzoEC begins to show fascinating supramolecular structures. The supramolecular structure of AzoEC with maximum DS consisted of a large-scale ordered lamellar structure formed by EC main chains and a small-scale ordered structure formed by azobenzene mesogens.     

Phase behaviour of amphiphilic side-chain polymers

The present study describes the phase behaviour of a low-molar-mass 1,3-diol with a linear alkyl chain in aqueous solution. From the combined results of differential scanning calorimetry and optical polarizing microscopy a phase diagram was constructed. The low-molar-mass diol forms a lamellar mesophase only in the presence of water. The influence of the linkage of the amphiphilic molecule to different polymer backbones on the stability of the mesophase was investigated. It is evident that amphiphilic side-chain polymers show a distinct stabilization of the mesophase. Moreover, comparison between the polyacrylate, polymethacrylate and polysiloxane indicates a strong influence of the main-chain flexibility on the stability of the liquid-crystalline phase. The type of the liquid-crystalline phase of the side-chain polyacrylate in the water-saturated state was identified by X-ray investigations as lamellar. The hydration behaviour of the polymers was investigated by ²H-N.M.R. and isopiestic measurements.     

Phase behaviour of amphiphilic side-chain polymers

The present study describes the phase behaviour of a low-molar-mass 1,3-diol with a linear alkyl chain in aqueous solution. From the combined results of differential scanning calorimetry and optical polarizing microscopy a phase diagram was constructed. The low-molar-mass diol forms a lamellar mesophase only in the presence of water. The influence of the linkage of the amphiphilic molecule to different polymer backbones on the stability of the mesophase was investigated. It is evident that amphiphilic side-chain polymers show a distinct stabilization of the mesophase. Moreover, comparison between the polyacrylate, polymethacrylate and polysiloxane indicates a strong influence of the main-chain flexibility on the stability of the liquid-crystalline phase. The type of the liquid-crystalline phase of the side-chain polyacrylate in the water-saturated state was identified by X-ray investigations as lamellar. The hydration behaviour of the polymers was investigated by ²H-N.M.R. and isopiestic measurements.     

Microstructure and stability of a lamellar liquid crystalline and gel phase formed by a polyglycerol ester mixture in dilute aqueous solution

The self-assembly behavior of a commercial mixture of polyglycerol fatty acid esters (PGE) and water is investigated as a function of temperature and surfactant content. The phase diagram of this pseudo-binary mixture was characterized using a combination of cross-polarized light and freeze-fracture electron microscopy (cryo-SEM), X-ray diffraction (XRD), small-angle neutron scattering (SANS), and differential scanning calorimetry (DSC). Our experiments show that the morphology of the supramolecular aggregates is lamellar and present in the form of a continuous or dispersed phase (multilamellar vesicles) depending on the water content of the system. Under the effect of temperature, the short- and long-range order of the bimolecular layers successively changes from a biphasic surfactant dispersion to a lamellar liquid-crystalline (Lalpha) and a stable lamellar gel phase (Lbeta) upon cooling; this transition is found to be irreversible. Formation of the lamellar aggregates can be related to the average molecular structure and shape factor of PGE. The stability of the resulting gel phase (Lbeta) appears to be due to the presence of small amounts of unreacted ionic co-surfactant, namely, fatty acid soaps, in this per se nonionic commercial mixture.     

Photochromic hybrid organic-inorganic liquid-crystalline materials built from nonionic surfactants and polyoxometalates: elaboration and structural study

This work reports the elaboration and structural study of new hybrid organic-inorganic materials constructed via the coupling of liquid-crystalline nonionic surfactants and polyoxometalates (POMs). X-ray scattering and polarized light microscopy demonstrate that these hybrid materials, highly loaded with POMs (up to 18 wt %), are nanocomposites of liquid-crystalline lamellar structure (Lalpha), with viscoelastic properties close to those of gels. The interpretation of X-ray scattering data strongly suggests that the POMs are located close to the terminal -OH groups of the nonionic surfactants, within the aqueous sublayers. Moreover, these materials exhibit a reversible photochromism associated to the photoreduction of the polyanion. The photoinduced mixed-valence behavior has been characterized through ESR and UV-visible-near-IR spectroscopies that demonstrate the presence of W(V) metal cations and of the characteristic intervalence charge transfer band in the near-IR region, respectively. These hybrid nanocomposites exhibit optical properties that may be useful for applications involving UV-light-sensitive coatings or liquid-crystal-based photochromic switches. From a more fundamental point of view, these hybrid materials should be very helpful models for the study of both the static and dynamic properties of nano-objects confined within soft lamellar structures.     

Pentadecyl phenol- and cardanol-functionalized fluorescent, room-temperature liquid-crystalline perylene bisimides: effect of pendant chain unsaturation on self-assembly

A new perylene bisimide (PBI) building block based on pentadecyl phenol (PDP) or cardanol was developed, which upon esterification with 3,4,5-tridodecyloxy gallate resulted in highly emissive, room-temperature liquid-crystalline (LC) molecules. The self assembly in solution was studied in detail by NMR spectroscopy, UV/Vis absorption, and fluorescence spectroscopy. In solution both PDP- and cardanol-based PBI exhibited similar behavior. They were molecularly dissolved in chloroform (CHCl(3)) but formed rotationally displaced H-type aggregates that emitted at 640 nm in methylcyclohexane (MCH). Surface morphology in dropcast films were characterized using microscopic techniques such as SEM, TEM, and atomic force microscopy (AFM). The liquid-crystalline properties were studied using differential scanning calorimetry (DSC), polarized light microscopy (PLM), and variable-temperature X-ray (small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WXRD)) studies. Variable-temperature X-ray studies in the LC phase indicated strong π-π stacking interaction present in the PDP-based PBI derivative, whereas the stacking was absent in the LC phase of the cardanol-based PBI. The latter formed self-organized structures of extremely short length due to the presence of cis double bonds in the C15 alkyl side chain, whereas the saturated alkyl side chain in PDP could pack efficiently, thereby resulting in nanofibers that were several micrometers in length.     

Preparation and nanoscale mechanical properties of self-assembled carboxylic acid functionalized pentathiophene on mica

The oligothiophene derivative 4-(5' " '-decyl-[2,2';5',2' ';5' ',2' ";5' ",2' " '] pentathiophen-5-yl)-butyric acid (D5TBA) was synthesized by Stille cross-coupling methods using functionalized thiophene monomers. The structural and mechanical properties of D5TBA self-assembled monolayers on mica have been studied by atomic force microscopy (AFM). The self-assembled films were prepared by immersing the mica in dilute chloroform or tetrahydrofuran (THF) solutions. The films were predominantly of monolayer thickness with molecules packed in nearly upright orientations. In regions covered with multilayers, the molecules in each monolayer were oriented opposite to those in the neighboring ones, that is, with COOH-COOH and CH3-CH3 contact. The nature of the end group in contact with the substrate depended on the solvent used and the degree of hydration of the substrate, with hydrophobic chloroform solvent favoring the methyl end down and hydrophilic THF favoring the acid group end down. The orientation could also be controlled by dipping using the Langmuir-Blodgett technique.     

Magnetic nanorods confined in a lamellar lyotropic phase

The dilute lamellar phase of the nonionic surfactant C 12EO 5 was doped with goethite (iron oxide) nanorods up to a fraction of 5 vol %. The interaction between the inclusions and the host phase was studied by polarized optical microscopy (with or without an applied magnetic field) and by small-angle X-ray scattering. We find that, when the orientation of the nanorods is modified using the magnetic field, the texture of the lamellar phase changes accordingly; one can thus induce a homeotropic-planar reorientation transition. On the other hand, the lamellar phase induces an attractive interaction between the nanorods. In more concentrated lamellar phases (under stronger confinement) the particles form aggregates. This behavior is not encountered for a similar system doped with spherical particles, emphasizing the role of particle shape in the interaction between doping particles and the host phase.     

Ionic liquid crystals based on mesitylene-containing bis- and trisimidazolium salts

The synthesis of novel ionic liquid crystals (ILCs) based on bis- and trisimidazolium salts (I-, BF4-, and [N(SO2CF3)2]-) bearing hydrophobic hexadecyl chains and a bridging mesitylene moiety is reported. The study of their mesomorphic properties is presented, including the characterization of the Smectic A phase by differential scanning calorimetry and polarized optical microscopy. A detailed powder X-ray diffraction (p-XRD) study as a function of temperature confirmed that cooling gives rise to a glass transition from the liquid-crystalline smectic A phase to a metastable lamellar phase. In addition, in the case of bisimidazolium iodide, the ability of these molecules to form self-aggregates in solution has been demonstrated by diffusion nuclear magnetic resonance (NMR) experiments.     

A mixed fullerene-ferrocene thermotropic liquid crystal: synthesis, liquid-crystalline properties, supramolecular organization and photoinduced electron transfer

Grafting of a ferrocene-containing liquid-crystalline malonate derivative to C60 led to the mixed fullerene-ferrocene material 1 which gave rise to a smectic A phase. Cholesterol was used as liquid-crystalline promoter. X-ray diffraction experiments and volumetric measurements indicated that 1 is organized in double layered structures. The corresponding supramolecular organization within the mesomorphic lamellar phase is characterized by a microsegregation of the different units (ferrocene, fullerene, and cholesterol) in distinct sublayers. In such a smectic A phase, C60 imposes the arrangement of the other molecular moieties. Photophysical studies revealed that electron transfer occurs from the donor ferrocene to the electron accepting fullerene. The formation of a long-lived radical pair, with lifetimes of the order of several hundred nanoseconds, was confirmed by time-resolved spectrometry, especially in the near infrared region, in which the radical anion of the fullerene moiety displays its characteristic fingerprint absorption.     

A new liquid crystal compound based on an ionic imidazolium salt

The preparation of 1,3-bis-(4-dodecyloxy-phenyl)-3H-imidazol-1-ium trifluoro-methanesulfonate is described from the 4-dodecyloxy phenylamine derivative. This new imidazolium salt exhibits a lamellar liquid crystal mesophase between 119 and 172 °C. The Smectic A phase has been characterised by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. In addition the lamellar crystallographic structure obtained on single crystal is reported and corroborated the self-assembly of molecules in the mesomorphic state.     

Flexible taper-shaped liquid crystal trimer exhibiting a modulated smectic phase

We prepared some taper-shaped liquid-crystalline trimers in which two phenylpyrimidine units and a 1,4-diphenyl-2,3-difluorobenzene unit are connected to 2,4-dihdroxy benzoic acid via flexible spacers. We then investigated their liquid-crystalline properties using polarised optical microscopy, differential scanning microscopy and X-ray diffraction. 6-[4–(5-Octylpyrimidin-2-yl)phenyloxy]hexyl 2-{7-{4-[4–(4-hexylphenyl)-2,3-difluorophenyl]phenyloxy}heptanoyloxy}-4-{6-[4–(5-octylpyrimidin-2-yl)phenyloxy]hexyloxy}benzoate (1) was found to exhibit a phase sequence of isotropic liquid – nematic – intercalated smectic A – intercalated anticlinic smectic C – modulated smectic C. The structure–property relation in the taper-shaped trimers reveals that the modulated phase is induced by competition between an intercalated structure stabilised by dipole–dipole interaction and a monolayer structure by packing entropy effects. Conformational change of compound 1 induced by intermolecular interactions plays an important role in the phase transition behaviour.