Co oxidation with oxygen in the presence of hydrogen on CoO/CeO<Subscript>2</Subscript> and CuO/CoO/CeO<Subscript>2</Subscript> catalysts

The catalytic activity of the CoO/CeO₂ and CuO/CoO/CeO₂ systems in selective CO oxidation in the presence of hydrogen at 20–450°C ([CuO] = 1.0–2.5%, [CoO] = 1.0–7.0%) is reported. The maximum CO conversion (X) decreases in the following order: CuO/CoO/CeO₂ (X = 98–99%, T = 140–170°C) > CoO/CeO₂ (X = 67–84%, T = 230–240°C) > CeO₂ (X = 34%, T = 350°C). TPD, TPR, and EPR experiments have demonstrated that the high activity of CuO/CoO/CeO₂ is due to the strong interaction of the supported copper and cobalt oxides with cerium dioxide, which yields Cu-Co-Ce-O clusters on the surface. The carbonyl group in the complexes Co^δ+-CO and Cu⁺-CO is oxidized by oxygen of the Cu-Co-Ce-O clusters at 140–160°C and by oxygen of the Co-Ce-O clusters at 240°C. The decrease in the activity of the catalysts at high temperatures is due to the fact that hydrogen reduces the clusters on which CO oxidation takes place, yielding Co⁰ and Cu⁰ particles, which are inactive in CO oxidation. The hydrogenation of CO into methane at high temperatures is due to the appearance of Co⁰ particles in the catalysts.     

Cellulose scaffolds modulated synthesis of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals: preparation,characterization and properties

Magnetic Co₃O₄ nanoparticles were prepared by using microporous regenerated cellulose films as sacrificial scaffolds. The cellulose macromolecules and the porous structure of the films made them used as spatially confined reacting sites where Co(OH)₂ nanoparticles could be synthesized in situ. When the cellulose matrix was removed by sintering at 500 °C, Co₃O₄ nanoparticles were obtained. XRD and XPS indicated that the prepared nanoparticles were pure Co₃O₄ without any impurity. TEM and SEM images revealed that the particle size of the nanoparticles was smaller than 100 nm. The nanoparticles had weak ferromagnetic properties at 25 °C. Furthermore, the pronounced quantum confinement effects of the synthesized nanoparticles have been observed, the optical bandgap energies determined were about 1.92 ~ 2.12 and 2.74 ~ 2.76 eV for O²⁻ → Co³⁺ and O²⁻ → Co²⁺ charge-transfer processes, respectively. Furthermore, the resulted Co₃O₄ nanoparticles behaved stable electrochemical performance with promising applications in the electrode for lithium ion battery.     

Ammonia gas sensor based on a spinel semiconductor,Co<Subscript>0.8</Subscript>Ni<Subscript>0.2</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanomaterial

Thick film of nanocrystalline Co_0.8Ni_0.2Fe₂O₄ was obtained by sol–gel citrate method for gas sensing application. The synthesized powder was characterized by X-ray diffraction (XRD) and transmission electron microscopy. The XRD pattern shows spinel type structure of Co_0.8Ni_0.2Fe₂O₄. XRD of Co_0.8Ni_0.2Fe₂O₄ revels formation of solid solution with average grain size of about 30 nm. From gas sensing properties it observed that nickel doping improves the sensor response and selectivity towards ammonia gas and very low response to LPG, CO, and H₂S at 280 °C. Furthermore, incorporation of Pd improves the sensor response and stability of ammonia gas and reduced the operating temperature upto 210 °C. The sensor is a promising candidate for practical detector of ammonia.     

Towards high-performance cathode materials for lithium-ion batteries: Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-coated LiNi<Subscript>0.8</Subscript>Co<Subscript>0.15</Subscript>Zn<Subscript>0.05</Subscript>O<Subscript>2</Subscript>

Zn-doped LiNi_0.8Co_0.2O₂ exhibits impressive electrochemical performance but suffers limited cycling stability due to the relative large size of irregular and bare particle which is prepared by conventional solid-state method usually requiring high calcination temperature and prolonged calcination time. Here, submicron LiNi_0.8Co_0.15Zn_0.05O₂ as cathode material for lithium-ion batteries is synthesized by a facile sol-gel method, which followed by coating Al₂O₃ layer of about 15 nm to enhance its electrochemistry performance. The as-prepared Al₂O₃-coated LiNi_0.8Co_0.15Zn_0.05O₂ cathode delivers a highly reversible capacity of 182 mA h g^?1 and 94% capacity retention after 100 cycles at a current rate of 0.5 C, which is much superior to that of bare LiNi_0.8Co_0.15Zn_0.05O₂ cathode. The enhanced electrochemistry performance can be attributed to the Al₂O₃-coated protective layer, which prevents the direct contact between the LiNi_0.8Co_0.15Zn_0.05O₂ and electrolyte. The escalating trend of Li-ion diffusion coefficient estimated form electrochemical impedance spectroscopic (EIS) also indicate the enhanced structural stability of Al₂O₃-coated LiNi_0.8Co_0.15Zn_0.05O₂, which rationally illuminates the protection mechanism of the Al₂O₃-coated layer.     

Supercapacitive performance of homogeneous Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/TiO<Subscript>2</Subscript> nanotube arrays enhanced by carbon layer and oxygen vacancies

Self-supported and binder-free electrodes based on homogeneous Co₃O₄/TiO₂ nanotube arrays enhanced by carbon layer and oxygen vacancies (Co₃O₄/co-modified TiO₂ nanotube arrays (m-TNAs)) are prepared via a simple and cost-effective method in this paper. The highly ordered TNAs offer direct pathways for electron and ion transport and can be used as 3D substrate for the decoration of electroactive materials without any binders. Then, by a facile one-step calcination process, the electrochemical performance of the as-obtained carbon layer and oxygen vacancy m-TNAs is approximately 83 times higher than that of pristine TNAs. In addition, Co₃O₄ nanoparticles are uniformly deposited onto the m-TNAs by a universal chemical bath deposition (CBD) process to further improve the supercapacitive performance. Due to the synergistic effect of m-TNAs and Co₃O₄ nanoparticles, a maximum specific capacitance of 662.7 F g^?1 can be achieved, which is much higher than that of Co₃O₄ decorated on pristine TNAs (Co₃O₄/TNAs; 166.2 F g^?1). Furthermore, the specific capacitance retains 86.0 % of the initial capacitance after 4000 cycles under a high current density of 10 A g^?1, revealing the excellent long-term electrochemical cycling stability of Co₃O₄/m-TNAs. Thus, this kind of heterostructured Co₃O₄/m-TNAs could be considered as promising candidates for high-performance supercapacitor electrodes.     

Novel Visible-Light-Driven Photocatalyst Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/FeWO<Subscript>4</Subscript> for Efficient Decomposition of Organic Pollutants

A highly efficient and visible light (λ ≥ 420 nm) responsive composite photocatalyst, Co₃O₄/FeWO₄ was prepared by simple impregnation method. The heterojunction semiconductors Co₃O₄/FeWO₄ demonstrated notably high photocatalytic activity over a wide range of composition than the individual component Co₃O₄ or FeWO₄ for the complete degradation of 1,4-dichlorobenzene (DCB) in aqueous phase under visible light irradiation. The photocatalytic activity of composite was optimized at 1/99 Co₃O₄/FeWO₄ composition. After 2 h of visible light irradiation 51% decomposition of 1,4-dichlorobenzene (DCB) was observed utilizing 1/99 Co₃O₄/FeWO₄ photocatalyst while the end members demonstrated a negligible degradation under the same experimental condition. The valence band (VB) and conduction band (CB) of Co₃O₄ is located above the VB and CB of FeWO₄, respectively. Both the semiconductors Co₃O₄ and FeWO₄ exhibit strong absorption over the wide range of visible light. The obviously enhanced photocatalytic performance of Co₃O₄/FeWO₄ composite has been discussed on the hole (h⁺) as well as electron (e^?) transfer mechanism between the VB and CB of individual semiconductors.     

Preparation of Ca<Subscript>3</Subscript>Co<Subscript>4</Subscript>O<Subscript>9</Subscript> by polyacrylamide gel processing and its thermoelectric properties

Ca₃Co₄O₉ powder was prepared by a polyacrylamide gel route in this paper. The effect of the processing on microstructure and thermoelectric properties of Ca₃Co₄O₉ ceramics via spark plasma sintering were investigated. Electrical measurement shows that the Seebeck coefficient and conductivity are 170 μV/K and 128 S/cm, respectively, at 700 °C, yielding a power factor value of 3.70 × 10⁻⁴ W m⁻¹ K⁻² at 700 °C, which is larger than that of Ca₃Co₄O₉ ceramics via solid-state reaction processing. The polyacrylamide gel processing is a fast, cheap, reproducible and easily scaled up chemical route to improve the thermoelectric properties of Ca₃Co₄O₉ ceramics by preparing the homogeneous and pure Ca₃Co₄O₉ phase.     

Effect of CeO<Subscript>2</Subscript> on the properties of the Pd/Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/cordierite catalyst in the conversion of CO,NO, and hydrocarbons

The effect of CeO₂ on the properties of the Pd/Co₃O₄-CeO₂/cordierite catalyst is a function of the method of its preparation. The catalyst obtained by the simultaneous deposition of cerium oxide and cobalt oxide showed high activity in the oxidation of CO (CO + O₂, CO + NO) and extensive oxidation of hexane (C₆H₁₄ + O₂). This behavior is due to the increased mobility of surface oxygen and increased dispersion of the catalyst components.     

Highly chemiluminescent magnetic mesoporous carbon composites Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@void@C with yolk-shell structure

In this work, highly chemiluminescent magnetic mesoporous carbon with yolk-shell structure was synthesized by encapsulating N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and Co²⁺ into the magnetic mesoporous carbon composites (Co²⁺-ABEI-Fe₃O₄@ void@C). The synthetic Co²⁺-ABEI-Fe₃O₄@void@C showed a good magnetic separation property, which could remove residual ABEI molecules and Co²⁺ in less than 3 min under an external magnet. Moreover, the synthetic Co²⁺-ABEI-Fe₃O₄@void@C demonstrated good chemiluminescence (CL) property and good stability when interacted with alkaline H₂O₂ solution. The CL intensity of such Co²⁺-ABEI-Fe₃O₄@void@C was about 120 times higher than that of ABEI-Fe₃O₄@void@C. The Co²⁺-ABEIFe₃O₄@ void@C also exhibited good electrochemiluminescence (ECL) property in alkaline solution. The outstanding CL/ECL performance of the Co²⁺-ABEI-Fe₃O₄@void@C was attributed to the Co²⁺ immobilized in the Co²⁺-ABEI-Fe₃O₄@void@C, which catalyzed the decomposition of H₂O₂ to generate O₂^?? and HO^?, expediting the CL/ECL reaction. The synthetic Co²⁺-ABEI-Fe₃O₄@void@C may be of great application for the development of new methodologies in bioanalysis.     

Synthesis and characterization of La<Subscript>0.8</Subscript>Sr<Subscript>0.2</Subscript>Co<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>O<Subscript>3±δ</Subscript> nanopowders by microwave assisted sol–gel route

Nano-crystalline La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ powder has been successfully synthesized by microwave assisted sol–gel (MWSG) method. The decomposition and crystallization behavior of the gel-precursor was studied by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) analysis. From the result of FT-IR and X-ray diffraction patterns, it is found that a perovskite La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ was formed by irradiating the precursor at 700 W for 3 min, but the well-crystalline perovskite La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ was obtained at 700 W for 35 min. Morphological and specific area analysis of the powder were done by transmission electron microscopy (TEM), scanning electron microscope (SEM) and Brunauer–Emmett–Teller (BET). The surface areas measured was 38.9 m²/g and the grain size was ∼23 nm. Electrochemical properties of pure LSCF cathode on YSZ electrolyte at intermediate temperatures were investigated by using AC impedance analyzer, which shows a low area specific resistance (0.077 Ω cm² at 1073 K and 0.672 Ω cm² at 953 K). Moreover, the synthesis period of 20 h usually observed for conventional heating mode is reduced to a few minutes. Thus, the MWSG method is proved to be a novel, extremely facile, time-saving and energy-efficient route to synthesize LSCF powders.     

Effect of the preparation method on the catalytic performance of Ca<Subscript>3</Subscript>Co<Subscript>4</Subscript>O<Subscript>9</Subscript> for methane oxidation

The layered structure oxide Ca₃Co₄O₉ particle was synthesized by two routes of citrate sol–gel method. The structure, morphology and surface property of Ca₃Co₄O₉ was characterized by XRD, SEM and XPS, respectively. The catalytic activity of Ca₃Co₄O₉ for methane combustion was tested in a fixed bed quartz tubular microreactor. The catalysis results reveal that the catalytic activity is sensitive to the texture of Ca₃Co₄O₉ by different route. TG measures confirm that the small particle size of Ca₃Co₄O₉ favors the oxygen transformation on the surface, which can be ascribed the random distribution of the crystal axes in irregular Ca₃Co₄O₉ particle.     

Synthesis of Na<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>7</Subscript> nanoparticles by sonochemical method for solid state electrolyte applications

Na₂Ti₃O₇ ceramic materials have been widely used in sodium-ion battery applications with relative good results; however, there are still several studies that might be carried out in the improvement of the Na₂Ti₃O₇ properties and the overall batteries’ performance. In this direction, we used sonochemical method following a thermal treatment in order to synthetized pure phase Na₂Ti₃O₇ nanopowders. X-ray diffraction characterization revealed that Na₂Ti₃O₇ is the primary phase in nanopowders and ceramic sample; although, a high level of amorphization was observed in the sonicated nanopowder without heat treatment process. Nanopowder-prepared ceramic sample showed a crystallite size of 50 nm after sintering at 900 °C for 1 h. The specific surface area, pore volume, and pore size were obtained from the B.E.T. measurements, being 51 m² g^?1, 0.07 cm³ g^?1, and 55 Å, respectively. The capacitance values of the nanopowder-prepared ceramic sample were in the order of microfarad. The total energy of the system was used to determine relaxation time of the sample (τ ₀ = 31 ms).     

Study on chemisorption of H<Subscript>2</Subscript>, O<Subscript>2</Subscript>, CO and C<Subscript>2</Subscript>H<Subscript>4</Subscript>on Pt-Ag/SiO<Subscript>2</Subscript>catalysts by microcalorimetry and FTIR

Adsorption microcalorimetry has been employed to study the interaction of ethylene with the reduced and oxidized Pt-Ag/SiO₂catalysts with different Ag contents to elucidate the modified effect of Ag towards the hydrocarbon processing on platinum catalysts. In addition, microcalorimetric adsorption of H₂, O₂, CO and FTIR of CO adsorption were conducted to investigate the influence of Ag on the surface structure of Pt catalyst. It is found from the microcalorimetric results of H₂and O₂adsorption that the addition of Ag to Pt/SiO₂leads to the enrichment of Ag on the catalyst surface which decreases the size of Pt surface ensembles of Pt-Ag/SiO₂catalysts. The microcalorimetry and FTIR of CO adsorption indicates that there still exist sites for linear and bridged CO adsorption on the surface of platinum catalysts simultaneously although Ag was incorporated into Pt/SiO₂. The ethylene microcalorimetric results show that the decrease of ensemble size of Pt surface sites suppresses the formation of dissociative species (ethylidyne) upon the chemisorption of C₂H₄on Pt-Ag/SiO₂. The differential heat vs. uptake plots for C₂H₄adsorption on the oxygen-preadsorbed Pt/SiO₂and Pt-Ag/SiO₂catalysts suggest that the incorporation of Ag to Pt/SiO₂could decrease the ability for the oxidation of C₂H₄.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Glycine-nitrate combustion synthesis of CeFeO<Subscript>3</Subscript>-based nanocrystalline powders

Glycine-nitrate combustion method was used to obtain powders based on CeFeO₃ nanocrystals with average crystallite size in the range from 33 ± 3 to 51 ± 5 nm. The influence exerted by parameters of the glycine-nitrate combustion process and, in particular, by the glycine-nitrate ratio (G/N) on the composition and crystallite size of the synthesis products was determined. The optimal G/N ratio at which nanocrystalline cerium orthoferrite is formed with the minimum amount of impurity phases Fe₂O₃ and CeO₂ was found to be 0.8. It was demonstrated that the composition of the starting solution affects the nature of the phase heterogeneity in the resulting product, crystallite size, and porosity of the nanocrystalline powders being formed. The patterns determined in the study make it possible to optimize the technology of nanocrystalline powders based on CeFeO₃ in order to obtain powders with prescribed phase composition and crystallite sizes to enable their use as a basis for photocatalytic materials.     

The Reactions of Two New Alkoxy-silyl Functionalized Alkynes with M<Subscript>3</Subscript>(CO)<Subscript>12</Subscript> {M = Fe,Ru} and Co<Subscript>2</Subscript>(CO)<Subscript>8</Subscript>. Spectroscopic Identification of the Products

The new alkoxysilyl-functionalized alkynes [HC≡CCH₂N(H)C(=O)N(H)(CH₂)₃Si(OEt)₃] and [HC≡C(C₆H₄)–N(H)C(=O)N(H)(CH₂)₃Si(OEt)₃] have been synthesized using literature methods. These have been reacted with Fe₃(CO)₁₂, Ru₃(CO)₁₂ and Co₂(CO)₈. With the iron carbonyl only decomposition was observed: with Ru₃(CO)₁₂ splitting of the alkynes into their parent components and formation of the complexes (μ-H)Ru₃(CO)₉[HC=N(CH₂)₃Si(OEt)₃], (μ-H)Ru₃(CO)₉[C–C(C₆H₄)NH₂] and (μ-H)₂Ru₃(CO)₉[HC–CCH₃] occurred. Finally, with Co₂(CO)₈ formation of complexes Co₂(CO)₆(HC₂R) R=(C₆H₄)NH₂, CH₂NH(CO)NH(CH₂)₃Si(OEt)₃, (C₆H₄)NH(CO)NH(CH₂)₃Si(OEt)₃ containing the intact alkynes could be obtained.     

Different Synthesis Protocols for Co3O4–CeO2 Catalysts—Part 1: Influence on the Morphology on the Nanoscale

Co₃O₄‐modified CeO₂ (Co/Ce 1:4) was prepared by a combination of sol–gel processing and solvothermal treatment. The distribution of Co was controlled by means of the synthesis protocol to yield three different morphologies, namely, Co₃O₄ nanoparticles located on the surface of CeO₂ particles, coexistent Co₃O₄ and CeO₂ nanoparticles, or Co oxide structures homogeneously distributed within CeO₂. The effect of the different morphologies on the properties of Co₃O₄–CeO₂ was investigated with regard to the crystallite phase(s), particle size, surface area, and catalytic activity for CO oxidation. The material with Co₃O₄ nanoparticles finely dispersed on the surface of CeO₂ particles had the highest catalytic activity.     

The Solid-State-Grinding Synthesis of Maganese-Modified Cobalt Oxides and Application in the Low-Temperature CO Preferential Oxidation in H<Subscript>2</Subscript>-Rich Gases

A series of MnOx modified cobalt oxides with different atomic molar ratios of Mn/(Mn?+?Co) were prepared by a soft reactive grinding route and investigated for CO preferential oxidation in H₂. It was found that as-prepared Mn-doped cobalt oxides exhibited superior activity compared to the single constituted oxides, other Mn–Co–O mixed oxides synthesized by solution-based route, and other grinding-derived mixed metal oxides M–Co–O (M?=?Zn, Ni, Cu, Fe). The grinding-derived MnCo10 catalyst with Mn/(Mn?+?Co) molar ration of 10% showed the best CO oxidation activity and higher selectivity at low temperature. The surface richness of Co³⁺ was not found as increasing the Mn molar ratio in the present work. However, the incoporation of MnOx with proper amount into Co₃O₄ could produce high surface area, high structure defects, and rich surface active oxygen species, while the ability to supply the active oxygen species was suggested to play the crucial role in promoting the catalytic performance of Mn–Co–O mixed oxides.     

Highly porous disk-like shape of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> as an anode material for lithium ion batteries

A novel disk-like shape of Co₃O₄ with high porosity was synthesized by a facile hydrothermal approach followed by calcination at 485 °C for 2 h. In order to further confirm the crystal structure, morphology, particle size, surface area, and porosity of the sample, a series of corresponding characterization techniques were used. The disk-like shape of Co₃O₄ as an anode delivered excellent rate capability such as 510.5 mAh g^?1 at 4.0 C, which is much higher than the theoretical capacity of commercial graphite anode (372 mAh g^?1). However, the electrode could not recover the high capacity during the long-term cycling at various higher current rates due to the deformation of the structure as confirmed by the ex situ studies. It is believed that the obtained remarkable structural feature with numerous void pores within the structure may be helpful for short-term cycling due to the large contact areas between the electrode and the electrolyte and a shorter diffusion length for lithium ion insertion but unable to act as a buffer to relax the volume expansion/contraction and alleviate the structural damage of the electrode during long-term cycling.     

Effects of polyvinyl alcohol on the electrochemical performance of LiNi<Subscript>0.8</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> cathode material

In view of the close relationship between the morphology of LiNi_0.8Co_0.15Al_0.05O₂ (NCA) and its electrochemical performance, polyvinyl alcohol (PVA) was added to control the NCA morphology. And thus a new NCA cathode material modified by PVA (NCA-PVA) was prepared. The morphology and structure of the obtained samples were characterized by X-ray diffraction, scanning electron microscopy, and laser diffraction. The electrochemical performance was characterized with electrochemical workstation and cell tester by assembling into CR2032 coin-type half-cell. The results show that the obtained NCA-PVA has a better layer structure and smaller cation mixing degree, smaller particle size, and more uniform particle size distribution than the pristine NCA without adding PVA. The electrochemical performance is also improved: the initial discharge capacity increases from 143.36 to 184.84 mAh g^?1. And the charge-discharge efficiency increases from 78.25 to 86.42%. The specific discharge capacities of NCA-PVA are all higher than that of the NCA (about 50 mAh g^?1) at all testing rates (0.1, 0.2, 0.5, 1.0, 2.0, and 5.0 C).