Protein separation by open tubular capillary electrochromatography employing a capillary coated with phenylalanine functionalized tentacle-type polymer under both cathodic and anodic electroosmotic flows

The use of a phenylalanine (Phe) functionalized tentacle-type polymer coated capillary column for protein separation by open tubular capillary electrochromatography (OTCEC) was demonstrated in this work. The tentacle-type stationary phase was prepared from silanized fused-silica capillaries of 50 microm I.D. by glycidyl methacrylate graft polymerization and subsequent Phe functionalization. Due to the amphoteric functional groups of the Phe bonded on the tentacle-type polymer stationary phase, protein separation in the prepared column can be performed under both cathodic and anodic electroosmotic flow (EOF) by varying the pH values of the mobile phase. Model proteins including ribonuclease A (RNase A), myoglobin, transferrin, insulin were baseline separated under cathodic EOF with a mobile phase of pH 8.8. Comparison between the separation result of the four proteins under conditions of OTCEC and capillary zone electrophoresis indicates that the migration behavior of the four proteins in the prepared column was the result of the interplay of chromatographic retention and electrophoretic migration. Besides, three basic proteins including RNase A, cytochrome c (Cyt-c) and lysozyme (Lys) were fully resolved under anodic EOF with an acidic running buffer (pH 2.5). The elution order was the same as the isoelectric point values of the proteins (RNase A相似文献   

Triamine‐bonded stationary phase for open tubular capillary electrochromatography

A multi‐functional separation column modified with 3‐[2‐(2‐aminoethylamino)ethylamino] propyl‐trimethoxysilane was developed for open tubular capillary electrochromatography. This functional hydrophilic triamine‐bonded open tubular column could generate both anodic and cathodic EOF. When the pH of the running buffer was below 5.3 (30% 3‐[2‐(2‐aminoethylamino)ethylamino] propyl‐trimethoxysilane, v/v), the anodic EOF was exhibited, which greatly prevented the undesired adsorptions of basic proteins on the capillary inner wall. Favorable separation of four basic proteins (viz. trypsin, ribonuclease A, lysozyme and cytochrome c) was successfully achieved at pH 3.5 of 10 mmol/L phosphate buffer. The column efficiencies of proteins were in the range from 87 000 to 110 000 plates/m, and the RSD values for migration time of four proteins were less than 1.2% (run‐to‐run, n=5). The ionic analytes were also separated efficiently in the co‐electroosmotic mode. The average efficiencies ranged from 81 000 to 190 000 plates/m for seven aromatic acids and 186 000–245 000 plates/m for four nucleoside monophosphates, respectively, and good capillary column repeatability was gained with RSD of the migration time not more than 3.0%. The triamine‐bonded open tubular capillary column is favorable to be an alternative functional medium for the further analysis of basic proteins and anionic analytes.     

Carboxymethylchitosan covalently modified capillary column for open tubular capillary electrochromatography of basic proteins and opium alkaloids

A novel open tubular (OT) column covalently modified with hydrophilic polysaccharide, carboxymethylchitosan (CMC) as stationary phase has been developed, and employed for the separations of basic proteins and opium alkaloids by capillary electrochromatography (CEC). With the procedures including the silanization of 3-aminopropyltrimethoxysilane (APTS) and the combination of glutaraldehyde with amino-silylated silica surface and CMC, CMC was covalently bonded on the capillary inner wall and exhibited a remarkable tolerance and chemical stability against 0.1 mol/L HCl, 0.1 mol/L NaOH or some organic solvents. By varying the pH values of running buffer, a cathodic or anodic EOF could be gained in CMC modified column. With anodic EOF mode (pH<4.3), favorable separations of basic proteins (trypsin, ribonuclease A, lysozyme and cytochrome C) were successfully achieved with high column efficiencies ranging from 97,000 to 182,000 plates/m, and the undesired adsorptions of basic proteins on the inter-wall of capillary could be avoided. Good repeatability was gained with RSD of the migration time less than 1.3% for run-to-run (n=5) and less than 3.2% for day-to-day (n=3), RSD of peak area was less than 5.6% for run-to-run (n=5) and less than 8.8% for day-to-day (n=3). With cathodic EOF mode (pH>4.3), four opium alkaloids were also baseline separated in phosphate buffer (50 mmol/L, pH 6.0) with column efficiencies ranging from 92,000 to 132,000 plates/m. CMC-bonded OT capillary column might be used as an alternative medium for the further analysis of basic proteins and alkaline analytes.     

Characterization of discontinuous buffer junctions using pH indicators in capillary electrophoresis for protein preconcentration

An effective sample preconcentration technique for proteins and peptides was recently developed using capillary electrophoresis (CE) with discontinuous buffers [C.A. Nesbitt, J.T.-M. Lo, K.K.-C. Yeung, J. Chromatogr. A 1073 (2005) 175]. Two buffers of different pH created a junction to trap the sample molecules at their isoelectric points and resulted in over 1000-fold preconcentration for myoglobin within 30 min. To study the formation of pH junctions in CE, a pH indicator, bromothymol blue, is used in this work to reveal the pH changes at the discontinuous buffer boundary. Bromothymol blue (BTB) exhibits a drastic change in its visible absorption spectrum (300-600 nm) going from the acidic to basic pH conditions, and is therefore ideal for visualizing the changes in pH at the junctions created by various buffer combinations. Preconcentration of myoglobin was performed in discontinuous buffers containing BTB. Major differences in the BTB absorption profiles were identified from buffer systems that differ significantly in preconcentration performance, which in turn, allowed for the identification of ideal buffers for sample preconcentration. Up to 2000-fold preconcentrations of myoglobin were achieved in the buffer systems studied in this work. In addition, the role of the electroosmotic flow (EOF) on the preconcentration performance was investigated. A low EOF was found to be desirable, as the pH junction could stay longer in the capillary for accumulation of proteins. The pH junction also displayed characteristics to resist bandbroadening. Potential laminar flow resulted from the mismatched residual EOFs under the two pH conditions within the discontinuous buffers appeared to have minimal effect on the preconcentration. In fact, external applied pressure can be used to control the migration of the pH junction without compromising the protein preconcentration.     

Electroosmotic pump-assisted capillary electrophoresis of proteins

A new method for protein analysis, that is, electroosmotic pump-assisted capillary electrophoresis (EOPACE), is developed and demonstrated to possess several advantages over other CE-based techniques. The column employed in EOPACE consists of two linked sections, poly(vinyl alcohol) (PVA)-coated and uncoated capillaries. The PVA-coated capillary column is the section for protein electrophoresis in EOPACE. Electroosmotic flow (EOF) is almost completely suppressed in this hydrophilic polymer coated section, so protein electrophoresis in the PVA-modified capillary is free of irreversible protein adsorption to the capillary inner wall. The uncoated capillary section serves as an electroosmotic pump, since EOF towards cathode occurs at neutral pH in the naked silica capillary. By the separation of a protein mixture containing cytochrome c (Cyt-c), myoglobin and trypsin inhibitor, we have demonstrated the advantages of EOPACE method over other relevant ones such as pressure assisted CE, capillary zone electrophoresis (CZE) with naked capillary and CZE with PVA-coated capillary. A significant feature of EOPACE is that simultaneous separation of cationic, anionic and uncharged proteins at neutral pH can be readily accomplished by a single run, which is impossible or difficult to realize by the other CE-based methods. The high column efficiency and good reproducibility in protein analysis by EOPACE are verified and discussed. In addition, separation of tryptic digests of Cyt-c with the EOPACE system is demonstrated.     

Cationic poly(amidoamine) dendrimers as additives for capillary electroseparation and detection of proteins

We examine the influence of cationic poly(amidoamine) (PAMAM) dendrimers on capillary electroseparation–UV analysis of proteins. PAMAMs adsorbing to the capillary surface suppressed the wall‐adsorption of proteins; meanwhile, PAMAMs added to the buffer exhibited selectivity toward proteins. Presence of 3×10^?4 g/mL PAMAM generation one (G 1.0) in 30 mM phosphate, at pH 2.6, rendered significant enhancement in separation efficiency; the merged peaks of myoglobin and trypsin inhibitor were separated. Moreover, the protein–dendrimer interactions changed the inherent UV absorbance profiles of proteins. UV–Vis study showed that the absorbance of cytochrome C and transferrin increased at the detection wavelength of 214 nm; their detection sensitivity enhanced by 2.44 and 2.01‐folds, respectively, with addition of 5×10^?4 g/mL PAMAM G 1.0.     

A very thin coating for capillary zone electrophoresis of proteins based on a tri(ethylene glycol)-terminated alkyltrichlorosilane

We describe the use of a tri(ethylene glycol)-terminated alkyltrichlorosilane to create a very thin, protein-resistant "self-assembled monolayer" coating on the inner surface of a fused-silica capillary. The same compound has been demonstrated previously on flat silica substrates to resist adsorption of many proteins. As a covalently bound capillary coating, it displays good resistance to the adsorption of cationic proteins, providing clean separations of a mixture of lysozyme, cytochrome c, ribonuclease A, and myoglobin for more than 200 consecutive runs. Electroosmotic flow (EOF) was measured as a function of pH; the coated capillary retains significant cathodal EOF, with roughly 50% of the EOF of an uncoated capillary at neutral pH, making this coating promising for applications requiring some EOF. The EOF was reasonably stable, with a 2.9% relative standard deviation during a 24 h period consisting of 72 consecutive separations of cationic proteins. Efficiencies for cationic protein separations were moderate, in the range of 190,000-290,000 theoretical plates per meter. The coating procedure was simple, requiring only a standard cleaning procedure followed by a rinse with the silane reagent at room temperature. No buffer additives are required to maintain the stability of the coating, making it flexible for a range of applications, potentially including capillary electrophoresis-mass spectrometry (CE-MS).     

Purification and partial characterization by matrix-assisted laser desorption ionization time-of-flight mass spectrometry of the recombinant transposase,TniA

This work deals with zone electrophoresis (ZE) separations of proteins on a poly(methyl methacrylate) chip with integrated conductivity detection. Experiments were performed in the cationic mode of the separation (pH 2.9) with a hydrodynamically closed separation compartment and suppressed electroosmotic flow. The test proteins reached the detector in less than 10 min under these working conditions and their migration times characterized excellent repeatabilities (0.1–0.6% RSD values). The chip-to-chip agreements of the migration times, evaluated from the ZE runs performed on three chips, were within 1.5%. The conductivity detection provided for protein, loaded on the chip at 10–1000 μg/ml concentrations, detection responses were characterized by 1–5% RSD values of their peak areas. Such migration and detection performances made a frame for reproducible baseline separations of a five-constituent mixture (cytochrome c, avidin, conalbumin, human hemoglobin and trypsin inhibitor). On the other hand, a high sample injection channel/separation compartment volume ratio of the chip (500 nl/8500 nl) restricted the resolution of proteins of very close effective mobilities in spite of the fact that in the initial phase of the separation an electric field stacking was applied. A maximum macroconstituent/trace constituent ratio attainable for proteins on the chip was assessed for cytochrome c (quantifiable when its concentration in the loaded sample was 10 μg/ml) and apo-transferrin (containing a trace constituent migrating in the position of cytochrome c detectable when the load of apo-transferrin was 2000 μg/ml). This assessment indicated that a ratio of 1000:1 is attainable with the aid of conductivity detection on the present chip.     

Free solution capillary electrophoresis of proteins using untreated fused-silica capillaries.

Numerous efforts have been made to separate proteins by capillary zone electrophoresis (CZE). The most common optimization techniques are changing the pH of the running buffer, coating the capillary surface with a hydrophilic polymer, or using additives in the sample solution. Surface coatings and solution additives can reduce the adsorption of the protein onto the capillary surface, but they diminish the separation efficiency and the resolution of CZE. This paper reports the successful separation of proteins in a untreated fused-silica capillary by raising the pH of the running buffer and washing between runs with 1.0 M sodium hydroxide. Under these conditions, model proteins and proteins in human serum have been determined by CZE. It is shown that the results from CZE are compatible with those of sodium dodecyl sulphate-polyacrylamide gel electrophoresis.     

Separation of drug stereoisomers by capillary electrophoresis with cyclodextrins

Using capillary electrophoresis, the enantiomers and isomers of several chiral drug molecules were resolved with cyclodextrins. Parameters affecting the resolution between (+)- and (−)-epinephrine, such as pH, cyclodextrin concentration, buffer concentration, and capillary dimensions were investigated. In addition to this, the effect of cyclodextrin type (β and several derivatized β-cyclodextrins) on resolution between stereoisomers of several chiral drug was also investigated. This study showed that the structural features of the molecule, the derivative groups on the cyclodextrin, the buffer composition and the capillary dimensions influence resolution. The chiral drugs used in this study were propranolol, atenolol, betaxolol, dipivefrin, AL03152 (an aldose reductase inhibitor), AL03363 (an oxidation product of AL03152) and the cis/trans isomers of pilocarpine.     

Over 1000-fold protein preconcentration for microliter-volume samples at a pH junction using capillary electrophoresis

An effective protein preconcentration technique specifically designed for microliter-volume samples is presented. The preconcentration is based on the capturing of protein in its isoelectric point (pI) within an applied electric field, using a pH junction created by a discontinuous buffer system. The buffers were chosen to selectively preconcentrate proteins of neutral pI, myoglobin in this case, while removing other proteins with acidic or basic pIs. For the suppression of electro-osmotic flow (EOF) and protein adsorption, the capillary inner wall was modified with a zwitterionic phospholipid bilayer coating. A preconcentration factor of up to 1700 was obtained for a 1 microg/mL solution of myoglobin. The preconcentration was completed in approximately 20 min. Several sample introduction conditions were presented to accommodate sample volume from one to a few hundreds of microliters. The final volume of the preconcentrated sample band was estimated to be approximately 5 nL.     

Influence of ignored and well-known zone distortions on the separation performance of proteins in capillary free zone electrophoresis with special reference to analysis in polyacrylamide-coated fused silica capillaries in various buffers. II. Experimental studies at acidic pH with on-line enrichment

The separation of acidic and basic model proteins was studied in capillary free zone electrophoresis in a polyacrylamide-coated, electroosmosis-free capillary at pH below their isoelectric points (pI) using various buffers at pH 2.7-4.8 with UV detection at 200 nm. The separation performance was significantly dependent on the coating quality, which may even differ within the same batch of capillaries. In addition, a washing step with 2 M HCl and the storage of the capillary in distilled water was essential for the performance. For high efficiency and resolution the choice of buffer constituents was extremely important which is discussed in quantitative terms in Part I. The most promising buffers were ammonium acetate and ammonium hydroxyacetate at pH 4 (ionic strengths: 0.12 and 0.15 M, respectively) with plate numbers up to 1,700,000 plates/m, corresponding to a zone width (2sigma) of only 1 mm in a capillary with 40 cm effective length, when the injected samples were dissolved in a 10-fold diluted background electrolyte (BGE), a zone even narrower than those obtained in polyacrylamide gel electrophoresis, the characteristic feature of which is remarkably thin zones. In the experiment giving this plate number, the calculated variance for longitudinal diffusion was larger than all the other calculated variances (those for the width of the starting zone, Joule heating, sedimentation and the curvature of the capillary). Interestingly, the effect of capillary curvature was significant. In addition, the sum of all other imaginable variances (corresponding to various types of slow on/off kinetics and hyper-sharp peaks) was in the most successful experiments only 28-50% of the variance for longitudinal diffusion. One hundred- to two hundred-fold dilution of the BGE improved the detection limits and provided high precision in both migration times and peak areas with ammonium hydroxyacetate and ammonium acetate as background electrolytes. However, that high dilution increased the variance 140-400% for these buffers, respectively, at least partly due to conductivity or pH differences between the sample and buffer zones (hyper-sharp peaks). Sedimentation of the enriched sample, a factor that has not previously been treated theoretically or experimentally, was probably another reason for our finding that peak heights did not increase when the sample was dissolved in a buffer diluted more than 200-fold, although pH changes and in some cases thermal expansion in the capillary also may contribute. Loss of protein may occur at the ionic strength 0.01 and lower due to precipitation. Limits of detection were in the range 4-17 pmol of proteins with ammonium acetate as BGE. No indication of denaturation of proteins at pH 4 was observed. However, the separation performance at pH 3 was not satisfactory and loss of proteins was observed, possibly indicating such problems. The protein mobilities decreased unexpectedly from pH 4 to 3--a further indication of conformation changes.     

In-capillary preconcentration of proteins for capillary electrophoresis using a cellulose acetate-coated porous joint

This work describes the in-capillary preconcentration of proteins using a cellulose acetate-coated porous joint. The capillary wall near the inlet end of a capillary was made porous by HF etching. During the etching process, a voltage was applied across the capillary wall and the electric current across it was monitored. As the current passed through the capillary wall, it became porous. A solution of cellulose acetate in acetone was added to the etched porous joint. After the acetone was evaporated off, a cellulose acetate-coated porous joint was formed. To preconcentrate the protein ions, an electric voltage was applied between the inlet end of the capillary and the coated porous joint; the protein ions electromigrated to the porous joint but could not pass through it, while the buffer ions could pass easily through the joint. After allowing a certain amount of time for protein preconcentration, a separation voltage was applied across the two ends of the capillary, and normal capillary electrophoresis was carried out. The preconcentration factors for cytochrome c, lysozyme, ribonuclease, and chymotrypsinogen were 65, 155, 705, and 800, respectively. The cellulose acetate-coated porous joint was shown to be strong and stable over time, and was used to analyze trace proteins and macromolecules in biological samples.     

Integration of a contactless conductivity detector into a commercial capillary cassette. Detection of inorganic cations and catecholamines

A contactless conductivity detector integrated into the capillary cassette of Agilent ^3DCE equipment is described. The detector is user-friendly, compact and easily modified. The UV detector of the ^3DCE equipment is available parallel with the contactless conductivity detector increasing the detection power. Two electrolyte solutions, 2-(N-morpholino)ethanesulfonic acid–histidine solution (20 mM, pH 6.0) and ammonium acetate (10 mM, pH 4.0), were used as the separation media for inorganic cations and organic catecholamines, respectively. The detection limit for all metal cations except barium was under 0.5 mg/l, and that for four catecholamines was ca. 10 mg/l. This last value was the same order of magnitude as achieved with parallel UV detection.     

Feasibility of nonvolatile buffers in capillary electrophoresis-electrospray ionization-mass spectrometry of proteins

The combination of capillary electrophoresis (CE) and electrospray ionization-mass spectrometry (ESI-MS) via a triaxial interface was studied as a potential means for the characterization of intact proteins. To evaluate the possibility to use a nonvolatile electrolyte for CE, the effect of sodium phosphate and ammonium borate on the MS signal of the proteins insulin, myoglobin, and bovine serum albumin (BSA) was investigated by employing infusion experiments, and compared to the effect of ammonium formate and formic acid. The study shows that with formic acid (50 mM, pH 2.4) the most intense protein signals were obtained, while the use of sodium phosphate buffer (5 and 10 mM, pH 7.5) almost completely diminished the MS response. Ammonium formate and ammonium borate (up to 100 mM, pH 8.5) also caused protein ion suppression, but especially with the borate buffer significant MS intensity remained. MS analysis of myoglobin revealed the loss of the heme group when an acidic CE electrolyte was used. Using a background electrolyte containing 25 mM ammonium borate (pH 8.5), it is demonstrated that a CE separation of a protein test mixture can be monitored with ESI-MS without degrading the MS performance allowing molecular weight determinations of the separated compounds. In the presence of borate, detection limits were estimated to be 5-10 microM (ca. 100 fmol injected). The usefulness of the CE-MS system employing a borate buffer is indicated by the analysis of a stored sample of BSA revealing several degradation products. A sample of placental alkaline phosphatase (PLAP), a potential therapeutic agent, was also analyzed by CE-MS indicating the presence of a protein impurity. Probably due to insufficient ionization of the PLAP (a complex glycoprotein), no MS signals of the intact protein were observed.     

Molecular pattern formation using chemically modified cytochrome c

Molecular pattern formation using chemically modified cytochrome c and green fluorescent protein (GFP) was presented for the application as a bioelectronic device. A protein conjugate was synthesized by the formation of disulfide bridges. In order to make molecular assembly onto the gold-coated substrate, cytochrome c was cross-linked with N-succinimidyl-3-(2-pyridyldithio)propionate (SPDP). After the modification of cytochrome c, it was spontaneously deposited, so that it could be adsorbed onto the gold-coated substrate by self-assembly (SA) technique. Using the cellulose membrane, cytochrome c molecules were deposited onto the gold-coated substrate with the spatial resolution of ca. 0.2 μm. In order to verify the modified cytochrome c, UV absorption spectrum was measured. GFP was adsorbed onto the cytochrome c monolayer by electrostatic force. Fluorescence emission spectrum was investigated to verify the existence of the GFP molecule onto the cytochrome c monolayer. To verify the adsorption of cytochrome c molecules onto the gold-coated substrate and GFP molecules onto the cytochrome c monolayer, the atomic force microscopy and lateral force microscopy investigations were performed. Molecular pattern formation of cytochrome c and GFP molecules were successfully performed by chemical means and electrostatic force.     

Preparative capillary zone electrophoresis using a dynamic coated wide-bore capillary

Preparative capillary zone electrophoresis separations of cytochrome c from bovine and horse heart are performed efficiently in a surfactant-coated capillary. The surfactant, dimethylditetradecylammonium bromide (2C(14)DAB), effectively eliminated protein adsorption from the capillary surface, such that symmetrical peaks with efficiencies of 0.7 million plates/m were observed in 50-microm id capillaries when low concentrations of protein were injected. At protein concentrations greater than 1 g/L, electromigration dispersion became the dominant source of band broadening and the peak shape distorted to triangular fronting. Matching of the mobility of the buffer co-ion to that of the cytochrome c resulted in dramatic improvements in the efficiency and peak shape. Using 100 mM bis(2-hydroxyethyl)imino-tris(hydroxymethyl)methane phosphate buffer at pH 7.0 with a 100-microm id capillary, the maximum sample loading capacity in a single run was 160 pmol (2.0 microg) of each protein.     

Pressurized gradient capillary electrochromatographic separation of eighteen amino acid derivatives

A pressurized gradient capillary electrochromatography (pCEC) instrument was developed to separate 18 amino acid derivatives. A reversed-phase C18 column (3 microm, 130 mm x 75 microm I.D.) and an acetate buffer (50 mmol/l NaAc, pH 6.4) with an ion-pair reagent (1% N,N-dimethylformamide) were used to separate derivatized amino acids from a standard solution (2 microg/ml), and the wavelength of the UV-Vis detector was 360 nm. The pressure on the capillary column was kept at approx. 70 Pa and 3 kV positive voltage was added on the outlet end of column. The effect of voltage on the eluting order of amino acids and the resolution of separation were studied, and it was found that when the voltage was higher than 3 kV, the adsorption of amino acids in the porous C18 column occurred. The effect of salt concentration, injection volume, and column length on the separation of amino acids was determined. The amino acid sample was separated by pCEC, and RSDs of the migration times of each amino acid were all less than 2.5%.     

Improved method for the simultaneous determination of whey proteins, caseins and para-kappa-casein in milk and dairy products by capillary electrophoresis

A capillary electrophoresis method for the simultaneous determination of whey proteins, caseins and their degradation products, such as para-kappa-casein, was proposed. The effect of several parameters (pH, ionic strength and concentration of urea in the electrophoresis buffer and applied voltage) on the analysis time and on the separation efficiency of the major milk proteins was studied. Using a hydrophilically coated capillary, in combination with electrophoresis buffer 0.48 M citric acid-13.6 mM citrate-4.8 M urea at pH 2.3, and a separation voltage of 25 kV, a complete separation of beta-lactoglobulin and para-kappa-casein was achieved, permitting the quantification of both components.     

Capillary modified with covalently attached coating for enhanced CE separation of biopolymers

δ‐Gluconolactone was covalently coupled with aminopropyl‐derivatized capillary, creating hydrophilic brushes on the inner wall of the capillary. The hydrophilic coating provided suppression of EOF and minimized protein adsorption, resulting in the separation of basic proteins and DNA with efficiencies up to 450 000 plates/m. The intra‐ and inter‐day repeatabilities of the coating referring to the migration times of the four tested proteins were satisfactory with RSD of no more than 1.1 and 1.8% (n=5), respectively. Two hundred consecutive runs were performed with negligible change in migration times and efficiency.