Efficiency studies in nonaqueous capillary electrophoresis

Nonaqueous capillary electrophoresis (NACE) is a relatively new area with several advantages that include enhanced efficiency and improved detection sensitivity. The goal of this study was to investigate the influence of NACE compared to aqueous CE on the separation efficiency of oligosaccharides. The applied voltage and buffer concentration were optimized for the aqueous and nonaqueous buffer media to minimize the band broadening effects of Joule heating and electrophoretic dispersion. At the optimized conditions a 1.5-fold enhancement in efficiency was obtained with the nonaqueous buffer medium.     

Stacking for nonaqueous capillary electrophoresis

Nonaqueous capillary electrophoresis (NACE) is a useful mode in CE for separation and quantification of hydrophobic compounds. However, because of the low conductivity of most of the organic solutions, stacking is not used often in this technique and the sample volume is very limited. As a result of the small sample volume, the detection limits are poor. Furthermore, NACE is affected greatly by the presence of salts in the sample. Here, we show that transient isotachophoresis (t-ITP) can be used easily in this type of electrophoresis to enhance the detection limits and also to reverse the deleterious effects of salts in the sample. Several factors, which affect the stacking in this type of electrophoresis, are described. For example, the presence of salts in the organic solvent, type of sample introduction, and the solvent for the terminating ion were all found to have profound effects on the degree of concentration. Furthermore, the separation time can be shortened by t-ITP.     

Recent advances in nonaqueous capillary electrophoresis

Nonaqueous capillary electrophoresis is undergoing rapid development. The scope of the investigations has clearly expanded, covering both basic studies and analytical applications. This review provides a comprehensive overview at the current status of the technique. Special attention is given to theoretical, methodological, and technical challenges, and the achievements of capillary electrophoresis in nonaqueous media are demonstrated with reference to recent applications.     

Analysis of illicit drugs by nonaqueous capillary electrophoresis and electrochemical detection

Nonaqueous capillary electrophoresis (NACE) was applied to the determination of illicit drugs. The complete separation of amphetamine, methamphetamine, 3,4-methylene dioxy amphetamine (MDA), 3,4-methylene dioxy methamphetamine (MDMA), mescaline, cocaine and benzoylecgonine was obtained using an acetonitrile based buffer solution containing 10 mM sodium acetate and 1 M acetic acid. Electrochemical detection using a Pt microdisk electrode set to a potential of +1.8 V was found to be selective for MDA, MDMA and mescaline. The detection limits for these compounds were in the low ng/mL range which is between 2 and 3 orders of magnitude lower compared to UV-detection.     

Determination of enkephalin peptides by nonaqueous capillary electrophoresis with electrochemical detection

Nonaqueous capillary electrophoresis with electrochemical detection (NACE-ED) was applied to the analysis of enkephalin peptides. The effect of different buffer compositions on the electrophoretic behavior of methionine enkephalin, leucine enkephalin, and [D-Ala2]-leucine enkephalin was studied. Separation of the protonated and the deprotonated peptides was obtained using ACN/methanol-based electrolyte systems. The electrochemical behavior of the enkephalins was studied by the capillary batch injection analysis technique. NACE-ED yielded well-defined signals in the oxidation mode only for the negatively charged analytes. The optimized BGE for the counterelectroosmotic separation consisted of 10 mM ammonium acetate in ACN/methanol (3:1 v/v). Using a platinum microdisk electrode set to an actual potential of +0.65 V detection limits in the submicromolar range were observed which are about one order of magnitude lower compared to UV detection. Problems concerning EOF instability and electrode fouling caused by water and other neutral sample impurities transported by the EOF can be avoided in the EOF-inverted mode using poly(ethylene glycol)-coated capillaries and an actual working electrode potential of +1.0 V. For the quantification of the enkephalins [D-Ala2]leucine enkephalin was used as internal standard. The practical utility for the determination of enkephalins in spiked plasma samples after SPE was demonstrated.     

Analysis of illicit drugs by nonaqueous capillary electrophoresis and electrochemical detection

Nonaqueous capillary electrophoresis (NACE) was applied to the determination of illicit drugs. The complete separation of amphetamine, methamphetamine, 3,4-methylene dioxy amphetamine (MDA), 3,4-methylene dioxy methamphetamine (MDMA), mescaline, cocaine and benzoylecgonine was obtained using an acetonitrile based buffer solution containing 10 mM sodium acetate and 1 M acetic acid. Electrochemical detection using a Pt microdisk electrode set to a potential of +1.8 V was found to be selective for MDA, MDMA and mescaline. The detection limits for these compounds were in the low ng/mL range which is between 2 and 3 orders of magnitude lower compared to UV-detection.     

Enantiomeric separations by nonaqueous capillary electrophoresis

This paper reviews the recent advances in enantioseparations by nonaqueous capillary electrophoresis (NACE) and the effect of organic solvents on mobility of enantiomers, separation selectivity and resolution. In general, the enantioseparation systems in NACE are similar to those of aqueous capillary electrophoresis (CE) except pure organic solvents are used. The influence of important parameters such as concentration and type of chiral selectors, apparent pH, ionic strength, temperature, and control of electroosmotic flow is discussed. In addition, the reported applications of NACE separations of racemates are presented.     

Analysis of steroids by nonaqueous capillary electrophoresis

A simple method for the separation and determination of steroids (estradiol valerate, triamcinolone, levonorgestrel and ethinylestradiol) in single and compound tablets by nonaqueous capillary electrophoresis with ultraviolet (UV) spectrophotometric detection has been developed for the first time. After optimizing the electrophoretic parameters, including the nature of electrolytes and composition of organic solvent, the running buffers of methanol-acetonitrile (95: 5, v/v) containing 20 mM sodium acetate (pH 6.5) and methanol-acetonitrile (90: 10, v/v) containing 25 mM sodium acetate (pH 7.0) were found to be most suitable for determining estradiol valerate and triamcinolone, respectively. Reliable separation and simultaneous determination of levonorgestrel and ethinylestradiol were achieved in methanol containing 20 mM of ammonium acetate and 10 mM of sodium dodecyl sulfate (SDS). Tamoxifen was used as internal standard. Performance of the method, including migration time and peak area reproducibility, linearity, sensitivity and accuracy, were also evaluated. The limits of detection (S/N = 3) for four analytes were in the range of 9.8–19.5 μ g/mL. The relative standard deviations (RSD) of the migration times and peak areas of the analytes were in the range of 0.14–1.0% and 0.7–2.7% (intraday), 0.5–2.8% and 1.5–4.2% (interday), respectively. Within the tested concentration range, linear relationships between peak area ratios and concentrations of the analytes were obtained (correlation coefficients: 0.9987–0.9996). The method has been successfully applied to the determination of ingredients with recoveries over the range of 96.6–100.6%. The text was submitted by the authors in English.     

Specific background electrolytes for nonaqueous capillary electrophoresis

The use of organic solvents or mixture of solvents in capillary electrophoresis is gaining wider attention. The electroosmotic flow mobility of eight organic solvents (acetonitrile, acetone, dimethylformamide, dimetylsulphoxide, propylene carbonate, methanol, ethanol, n-propanol) and of mixtures of several solvents (methanol-acetonitrile, methanol-propylene carbonate, acetonitrile-propylene carbonate) has been studied. The influence of 1,3-alkylimidazolium salts in different solvents on the separation of different analytes has been investigated. Some of these salts have shown usefulness for matrix-assisted laser desorption ionization matrices and off-line analysis of electrophoresis fractions. It also appears that nonaqueous capillary electrophoresis with 1,3-alkylimidazolium salts as background electrolytes is suitable for separation small inorganic ions.     

Chiral separations by capillary electromigration techniques in nonaqueous media. I. Enantioselective nonaqueous capillary electrophoresis

Enantiomer separations by CE employing nonaqueous conditions are reviewed. The general focus of this article is directed towards solvent effects on chiral recognition and the separation mechanism. After a general discussion of solvent effects on the individual processes involved in CE enantiomer separation, specifics for various selector classes are discussed together with a few applications of enantioselective nonaqueous CE.     

Control of electroosmotic flow in nonaqueous capillary electrophoresis by polymer capillary coatings

In aqueous capillary electrophoresis the electroosmotic flow (EOF) can be strongly suppressed or eliminated by coating the capillary surface silanols either by buffer additive adsorption or chemical modification. Hydrophilic coatings, e.g., polyvinyl alcohol (PVA) proved to be most efficient for EOF control in applications like DNA analysis. In nonaqueous capillary electrophoresis (NACE), however, the EOF cannot be totally suppressed with these capillaries and coating efficiency turned out to be solvent-depending. In this paper, fused-silica capillaries with monomeric and polymeric coatings differing in hydrophobicity and chemical properties (vinyl, vinyl acetate, vinyl alcohol and acrylates with different alkyl chain length) were investigated. Besides studying the EOF characteristics with different organic solvents and water, gas chromatography (GC) measurements were carried out to probe the silanol reduction via ether retention and the surface hydrophobicity by retention of nonane. Good correlations between GC results and EOF magnitude could be found. It could be demonstrated that the polymeric coating has to be solvatized by the buffer solvent to reduce the EOF. The PVA coating was optimal for aqueous systems but not effective for some nonaqueous buffers. On the other hand, polyvinyl acetate and polyethyl acrylate as polymeric coatings proved to be optimal to reduce the EOF in NACE.     

Separation of open-cage fullerenes using nonaqueous capillary electrophoresis

In this study, nonaqueous capillary electrophoresis (NACE) was used to separate three open-cage fullerenes. Trifluoroacetic acid (TFA) was used as the nonaqueous background electrolyte to change the analytes’ mobilities. The selectivity and separation efficiency were critically affected by the nature of the buffer system, the choice of organic solvent, and the concentrations of TFA and sodium acetate (NaOAc) in the background electrolyte. The optimized separation occurred using 200 mM TFA/20 mM NaOAc in MeOH/acetonitrile (10:90, v/v), providing highly efficient baseline separation of the open-cage fullerenes within 5 min. The migration time repeatability for the three analytes was less than 1% (relative standard deviation). Thus, NACE is a rapid, useful alternative to high-performance liquid chromatography for the separation of open-cage fullerenes.     

Alcohols and wide-bore capillaries in nonaqueous capillary electrophoresis.

The feasibility of using C1-C5 alcohols as electrolyte solutions in nonaqueous capillary zone electrophoresis was investigated. The separation of basic narcotic analgesics and acidic diuretics was modified by changing the alcohol in an electrolyte solution containing alcohol-acetonitrile-acetic acid (50:49:1, v/v) and 20 mM ammonium acetate while other experimental conditions were kept constant. The alcohols studied were methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol. The results indicate that even longer-chain alcohols can be used in nonaqueous capillary zone electrophoresis and, because of the lower currents they allow, they are especially advantageous in wider capillaries. Basic analytes were separated in 200 microm and 320 microm ID capillaries with 1-butanol-acetonitrile-acetic acid (50:49:1, v/v) containing 20 mM ammonium acetate as electrolyte solution. Problems related to the use of wide-bore capillaries are discussed.     

Ionic liquids as electrolytes for nonaqueous capillary electrophoresis

Acetonitrile is a well-suited medium for nonaqueous capillary electroseparations and enables extending the range of applications of capillary electrophoresis (CE) techniques to more hydrophobic species. In this study, the dialkylimidazolium-based low temperature melting organic salts know as "ionic liquids" (ILs) are used as electrolytes. At room temperature these liquids are miscible with acetonitrile which makes it easy to use them for adjustment of analyte mobility and separation. The anionic part as well as the concentration of an IL influence the general electrophoretic mobility of the buffer system. The separation of different analytes is achieved because they become charged in the presence of ILs in separation media. There is also a possibility for a complex formation between the solute and the electrolyte which alters the mobility of the solute. A selected application of separations of phenols and aromatic acids will be discussed.     

Chiral separation of anticholinergic drug enantiomers in nonaqueous capillary electrophoresis

Nonaqueous capillary electrophoretic (NACE) method for the separation of nine structurally similar chiral anticholinergic drugs was developed. The eight drug enantiomers were separated on baseline within 18 min using 20mM phosphoric acid and 10 mM NaOH, containing 10 mM heptakis(2,3-dimethyl-6-sulfato)-4beta-cyclodextrin (HDMS-beta-CD) in methanol. The results were compared with those obtained in the high performance liquid chromatography system.     

Rapid separation of basic drugs by nonaqueous capillary electrophoresis

Summary Nonaqueous capillary electrophoresis (NACE) has been used to achieve rapid separations of basic drugs. A high electric field was obtained by using short capillaries. Baseline separations of basic drugs, including amphetamines, tropane alkaloids and local anesthetics, were achieved in 1 min by selection of the appropriate organic solvent and electrolyte composition. Thus, high-throughput analyses can be performed. Peak efficiency up to 9154 theoretical plates s⁻¹ was achieved in a separation performed at 923V cm⁻¹. No discernible loss in resolution was observed when a conventional capillary (64.5cm) was replaced by a short (32.5 cm) capillary.     

Separation of transition metals in nonaqueous media with capillary electrophoresis

The separation of transition metal Ni2+, Cu2+, Co2+, Zn2+, Cd2+ and Fe3+ in methanol was investigated by using different types of organic acids as complexing agents. In pure methanol, the weaker and simpler acetic, propionic, butyric and valeric acids could enhance metal ions selectivity by increasing acid concentration and metal ions could be separated with high efficiency. However, hydroxycarboxylic acids obviously made separation efficiency worse. The effect of mixed organic acids, mixture solvent (methanol-acetonitrile, methanol-water) on metal ions separation was discussed further. The advantages of using nonaqueous solvent over aqueous for metal ions separation were shown finally.     

Method for derivatization of ephedrine and pseudoephedrine in nonaqueous media and determination by nonaqueous capillary electrophoresis with laser induced fluorescence detection

A nonaqueous capillary electrophoresis with laser-induced fluorescence detection method was developed for the quantification of ephedrine and pseudoephedrine after derivatization with 4-chloro-7-nitrobenzo-2-oxa-1, 3-diazol in nonaqueous media. The derivatization was made in off-line mode. By a series of optimizations, a derivatization buffer composed of 40 mm ammonium acetate and 20% acetonitrile and a running buffer composed of 80 mm ammonium acetate and 3% acetic acid were applied for the derivatization and separation of ephedrine and pseudoephedrine, respectively. Linear relationships for ephedrine and pseudoephedrine were obtained in the range 1.23-19.60 mg/L (correlation coefficients 0.9970 for ephedrine and 0.9994 for pseudoephedrine), and the detection limits for ephedrine and pseudoephedrine were 0.014 and 0.011 mg/L, respectively. The method was applied to the analysis of ephedrine and pseudoephedrine in four preparations with recoveries in the range 93.9-105.1%.     

Evaluation of electroosmotic markers in aqueous and nonaqueous capillary electrophoresis

The most common method to determine the EOF in CE is to measure the migration time for a neutral marker. In this study, 12 compounds (three novel and some previously used) were investigated as EOF markers in aqueous and nonaqueous BGEs. In the aqueous buffer systems (ammonium acetate, sodium phosphate, and sodium borate) the evaluation included a wide pH range (2–12). Two BGEs contained chiral selectors (sulphated‐β‐CD, (?)‐diketogulonic acid) and one that contained a micellar agent (SDS) were included in the study. The majority of the evaluated compounds were found to migrate with the EOF in the water‐based BGEs and are thus useful as EOF markers. However, in the SDS‐based BGE only four of the compounds (acetone, acrylamide, DMSO, and ethanol) were found to be applicable. In the nonaqueous BGEs 11 markers (acetone, acetophenone, acrylamide, anthracene, benzene, 4‐(4‐methoxybenzylamino)‐7‐nitro‐2,1,3‐benzoxadiazole, benzyl alcohol, 2,5‐diphenyloxazole, ethanol, flavone, and mesityl oxide) seemed to be functional as EOF markers. Even though several of the evaluated compounds can be used as EOF markers in the investigated BGEs, the authors would recommend the use of acrylamide as a general marker for UV detection. Furthermore, the four fluorescent markers (of which three were novel) gave RSD values equal to the other markers and can be used for the determination of the EOF in CE or microchip CE with fluorescence detection.     

水相体系毛细管电泳与非水体系毛细管电泳分离手性药物的比较

将非水毛细管电泳(NACE)与传统的水相毛细管电泳从有机溶剂的添加、离子强度的改变以及pH的改变等方面作了一系列的对比性研究。在有机组分从10%增加到100%的过程中,被分离样品的迁移速率逐渐降低,其分离效率先呈升高的趋势,达到一个最大值后,在呈下降的趋势。这主要是由于缓冲介质粘度和介电常数的变化以及管壁Zeta电位的变化所造成的。在非水体系中,最佳分离pH要比在水相体系中高,其分离效率也是随着离子强度的增大而升高。