活性聚合,表现活性聚合和准活性聚合

活性聚合是连锁聚合反应体系中链转移和终止反应速率为零时的特殊反应类型，表现活性聚合和准活性聚合则是链转移或终止反应未被完全消除而人有活性聚合物特征两类聚合物反应，是非活性聚合活性聚合过渡和逼近时的两种聚合反应类型，本文对活性聚合，表现活性聚合和准活性聚合的基本概念及它们之间的区别作了简单的介绍。     

活性聚合、表观活性聚合和准活性聚合

活性聚合是连锁聚合反应体系中链转移和终止反应速率为零时的特殊反应类型,表现活性聚合和准活性聚合则是链转移或终止反应未被完全消除而又具有活性聚合特征的两类聚合反应,是非活性聚合向活性聚合过渡和逼近时的两种聚合反应类型。本文对活性聚合、表观活性聚合和准活性聚合的基本概念及它们之间的区别作了简单的介绍。     

活性点数对煤焦气化反应的影响：I.气化活性的评价

在活性点评价装置上，以二氧化碳与煤焦进行气化反应，测得了高温时煤焦的活性点数，实验发现其活性点数随煤种而变。煤化程度低的煤种具有较多的活性点数，随煤化程度的提高。活性点数相应减少，气化反应速率与活性点数成线性关系，不同煤种的气化速率的数十倍差别是由于煤焦具有的活性点数的差异所致。活性点数是表征煤焦气化活性的一种重要标准。     

具有生物（理）活性的二茂铁衍生物

结合作者的研究工作，本文对具有生物（理）活性的二茂铁衍生物进行了综述，探讨了生物（理）活性与结构之间的相互关系。     

1,2,4-三唑类化合物的合成及其农用活性研究进展

1,2,4-三唑类化合物是生物活性分子的重要结构单元,具有多种药理活性,特别是在抗真菌、杀虫和除草等农用活性方面得到广泛应用。本文对部分1,2,4-三唑环上的活性位点改性研究及其在农用活性方面的应用进行了总结归纳,期望为后期该类化合物的设计合成及农用活性研究提供参考和借鉴。     

Synthesis and Antioxidant Activity of Sapriparaquinone Analogues

It has been considered that the lipid peroxidition damage was involved in aging and pathological disorders. Some phases of atherosclerosis, neuronal ceroid lipofuscinosis, intermittent claudication, oxygen toxicity, and liver injury caused by orotic acid, ethanol, phosphorous or chlorinated hydrocarbons have been discussed in relation to lipid peroxidion1-3. We found that a series of unique 4,5-secoditerpenoidal compounds isolated from the medicinal plant Salvia prionitis showed various bioact…     

蜂毒肽C末端片段的反序肽的抗菌活性和溶血活性

设计并合成了具有不同碱性氨基酸残基数和不同疏水性片段链长的基于Mel(12~26)的系列反序肽类似物.结果表明,反序肽的正电荷和疏水性对于抑菌活性都很重要,N端至少保留3个碱性氨基酸(正电荷>4)和C端的疏水性片段的链长至少为8个氨基酸残基的类似物具有较高的抑菌活性,具有较大的抑菌活性的最小反序肽类似物为具有11个氨基酸残基的RetroMel(13~23).这些反序肽的溶血活性都很小.     

偶氮染料分子的电子结构与生物降解活性（Ⅱ）

通过ＭＮＤＯ计算及相关实验结果,用取代基非定域活性概念分析了羟基、氨基及硝基在－Ｎ－Ｎ－上的电子效应,阐述了取代基影响偶氮键生物降解活性的电子结构机理,并提出将ＭＮＤＯ统计集成分析中的活性电荷ＱＡ作为关联偶氮键生物解活性的电子结构参数。     

含1,2,4-三唑环的亚胺及酰亚胺类化合物的合成及生物活性

以取代苯甲酸为原料,经酯化、肼解、成盐和环化反应得到关键中间体4-氨基-3-芳基-1,2,4-三唑-5-硫酮,再分别与芳醛和邻苯二甲酸酐缩合得到亚胺及酰亚胺,最后经硫醚化反应合成了24个新型的含有1,2,4-三唑结构单元的亚胺及酰亚胺类化合物,其结构经质谱、红外光谱、核磁共振及元素分析确认.初步生物活性测试结果表明,在实验浓度下大部分化合物表现出一定的杀菌活性,尤其是化合物9a,9d和9e对水稻纹枯病菌的抑制活性与对照杀菌剂氟硅唑相当.初步的细胞毒性实验结果表明,化合物7c,7f和9k对人肺癌细胞(A549)的抑制活性与对照药品5-氟尿嘧啶基本处于同一水平.     

α—氨基膦（次膦）酸类衍生物的合成及其性质

采用8种合成方法,合成了38种α-氨基膦(次膦)酸类衍生物。发现部分α-氨基膦酸化合物中含有1个结晶水。测定了化合物的pK_α值。所有化合物都具有一定除草和杀菌活性。     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

酞菁染料的金属化和溴化与光物理影响的研究

以α位(2,4-二特戊基)苯氧基邻苯二腈作为环合前体,制备了多种金属酞菁,产物经元素分析、紫外、红外、核磁氢谱等分析手段进行表征.并选择了部分酞菁进行溴化,其中着重研究了不同中心金属以及溴化对染料Q带吸收的影响.结果表明,酞菁染料的金属化对于其Q带吸收影响很大,多数染料金属化后会出现蓝移,而选择合适的条件进行溴化,可以使得金属酞菁的Q带吸收出现一定程度的红移,其中部分溴化金属酞菁的吸收波长与光信息产业中使用的近红外激光器很接近,具有潜在的实用价值.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

OPTIMIZATION OF THE SYNTHESIS OF ACRYLAMIDE HYDROGEL BY γ-RAY IRRADIATION

Hydrogels have been synthesized from 10%, 20%, 30%, 40%, 50% and 60% aqueous solutions of acrylamide monomer by gamma radiation employing doses in the range of 0.2-30 kGy from a Co-60 source. The effect of solution concentration, γ-ray dose, pH and time was studied in order to observe the optimizing conditions in the characterization of hydrogels. Gel fraction increases with dose for all concentrations indicating hundred-percentage conversion of gel at doses ≥5 kGy for homogenous solutions in the range of 20%-50% concentration. On the other hand, 10% solution provides conversion less than 86% even at 30 kGy, whereas 60% monomer makes an inhomogeneous solution which stile gives about 100% gel fraction. Swelling of hydrogels under water with respect to time varies with both the doses and concentrations due to the change of crosslinking density in the gels. The maximum volume change of hydrogels during swelling and water desorption mainly occurs within 24 h. Swelling is also enhanced with the rise of pH due to change of ionic content of the solvent. Considering the amount of gel fraction and the properties of hydrogel, the samples prepared from 20% solution at 5kGy show better results. Moreover, the effect of bacteria on hydrogel was found to be nil, suggesting a prohibition of growth of microorganism in it.     

ELECTROCHEMICAL POLYMERIZATION OF ANILINE IN PHOSPHORIC ACID AND THE PROPERTIES OF POLYANILINE

The behavior of the electrochemical polymerization of aniline in a weak acid, phosphoric acid, is very similar to that in strong acids, i.e. its polymerization rate increases quickly with the electrolysis time. The FTIR spectra of polyaniline samples synthesized in phosphoric acid indicate that the counter ion H2PO4^- is present in both the oxidized form and the reduced form of polyaniline. The counter ion plays an important role in adjusting the pH value at the electrode surface of polyaniline during the oxidation and reduction processes. As a result, a pair of redox peaks still appear in cyclic voltammograms of polyaniline in a solution of sodium sulfate of pH 5.5 and in a solution of NaH2PO4 of pH 7.0,respectively, at low potential scan rate; and the color of polyaniline film also changes with applied potential at pH 7.0. Thus,the pH region for the electrochemical activity and the electrochromism of polyaniline is extended to pH 5.5 for a solution of sodium sulfate and to pH 7.0 for a solution of NaH2PO4. The conductivity of polyaniline is 3.3 S cm^-1, depending on the concentration of phosphoric acid used in the stage of polymerization of aniline. The result of elemental analysis of polyaniline is presented here.     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

液晶聚合物/柔性链聚合物共混体系相分离形态

利用元胞动力学方法在二维情况下对浓度、取向序参量的含时Ginzberg-Landau方程进行数值求解,研究了液晶聚合物/柔性链聚合物共混体系的相分离动力学,考察了浓度、取向有序过程的耦合对相分离形态的影响.结果表明,此耦合作用对相分离的时间进程以及相分离图样的空间排布都有影响.液晶聚合物的取向有序相当于增加了两组分间的不相容性而促进两相分离;两个序参量在热力学方面的耦合使液晶聚合物趋向于沿着界面方向取向,而动力学方面的耦合使液晶聚合物分子沿着其取向方向扩散,相分离图样的空间排布由这两种效应共同决定通过极化率张量的定义用数值方法模拟得到了相分离体系的小角光散射图样,结果表明,散射强度分布具有方位角依赖性,它是由浓度、取向序参量的空间变化共同决定的.     

PREPARATION OF NANOMETER TiO2 ORGANIC SOLUTION-EFFECT OF ORGANIC SILOXANE ON SOL PROPERTIES

A homogeneous longtime stabilized transparent nanometer TiO2 organic solution was obtained by means of the simultaneous hydrolysis and co-polycodensation of tetrabutyltitanate (TBT) and methacryloxypropyltrimethoxysilane (MAPTMS) by the sol-gel process. The particle size of nanometer titanium dioxide was controlled by use of bifunctional silanes, such as diphenyldimethoxysilane (DPDMS), diphenyldiethoxysilane (DPDES) and dimethyldiethoxysilane (DMDES). The effect of TiO2 content in the solution on the refractive index of system was discussed in detail. The result shows that the refractive index of solution increases linearly with TiO2 content. The refractive index of the three hybrid nanorneter materials attained 1.6053, 1.5846 and 1.5346, respectively. The size of nanometer particles was characterized by TEM and the particle diameter thus obtained is in the range of 20-90 nm. FT-IR spectra of the materials show that the TiO-Si bond is formed.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.