A study of the interaction between polyelectrolyte-coated nanostructured CaCO<Subscript>3</Subscript> particles and a stearic acid monolayer spread at the water/air interface

The influence of nanostructured CaCO₃ particles, both uncoated and coated with a polyelectrolyte (poly(diallyldimethylammonium chloride), polyethyleneimine, fluorescein-5-isothiocyanate-labeled poly(allylamine hydrochloride), or sodium polystyrene sulfonate), on a stearic acid monolayer spread on the surface of an aqueous subphase has been studied. The interaction of the particles present in the subphase with the monolayer as depending on the presence and composition of a polymer coating has been estimated with the help of compression isotherms and the Brewster angle microscopy. The monolayers were transferred from the aqueous subphase onto a solid substrate and studied by scanning electron microscopy. Strong interaction has been revealed between the calcium carbonate particles and the stearic acid monolayer. It has been shown that the transfer of the monolayer from the aqueous suspension surface onto the solid substrate may be accompanied by the detachment of the polymer coating from the surface of CaCO₃ particles or their transfer together with the monolayer.     

Langmuir–Blodgett Monolayers and Films of Alkylated Tetraazacrowns Containing Metal Ions and Nanoparticles

The behavior of individual 1,7-dicetyltetraaza-12-crown-4 and its mixture with 1,4,7,10-tetracetyltetraaza-12-crown-4 in the Langmuir monolayers at the subphases containing Cu(II) ions or colloidal gold particles is studied. Based on the compression isotherms, the complexing ability of these amphiphilic cyclenes in a monolayer at the surface of aqueous dilute solutions of copper salt is established. It was shown that the fraction of complexes in a monolayer is proportional to the copper ion concentration in the subphase. Using surface balance, atomic force microscopy, and electron microscopy methods, it was revealed that the monolayer of dicetylcyclene at the surface of gold hydrosol binds nanoparticles from the subphase; the number of particles bound by the monolayer is proportional to their content in the hydrosol. The Langmuir–Blodgett films (LBF) of dicetylcyclene are prepared; their ability to bind copper ions from solution was disclosed by quartz crystal microbalance. The LBFs of dicetylcyclene containing gold nanoparticles in each layer are assembled.     

Effect of compression of a stearic acid monolayer on interfacial binding of copper ions and cluster formation

The effect of compression of a stearic acid Langmuir monolayer on the interaction of copper ions with the monolayer and on the formation of interface clusters has been studied as functions of pH and ionic content of the water subphase. Copper binding was estimated by direct electron paramagnetic resonance measurements of ion concentrations in the water subphase. A scanning tunnelling microscopy study of monolayer Langmuir-Blodgett films, deposited on graphite substrates, gave evidence for the formation of nanosized clusters on the monolayer surface. The data obtained showed that the interaction of the monolayer with copper ions and the accompaning cluster formation processes were determined by the arrangement, order and mobility of the stearic acid molecules in the monolayer and the electrostatics at the interface.     

Adsorption of carboxylate-modified gold nanoparticles on an octadecylamine monolayer at the air/liquid interface

Gold nanoparticles (Au NPs) were prepared and surface-modified by mercaptosuccinic acid (MSA) to render a surface with carboxylic acid groups (MSA-Au). Octadecylamine (ODA) was used as a template monolayer to adsorb the Au NPs dispersed in the subphase. The effect of MSA concentration on the incorporation of Au NPs on the ODA monolayer and the relevant behavior of the mixed monolayer were studied using the pressure-area (pi-A) isotherm and transmission electron microscopy (TEM) observations. The experimental results showed that the adsorbed density of Au NPs is low without the surface modification by MSA. When MSA was added into the Au NP-containing subphase, the incorporation amount of Au NPs increased with increasing MSA concentration up to approximately 1 x 10-5 M for the particle density of 1.3 x 1011 particles/mL. With a further increase in the MSA concentration, the adsorbed particle density decreases due to competitive adsorption between the free MSA molecules and the MSA-Au NPs. It is inferred that free MSA molecules adsorb more easily than the MSA-Au NPs on the ODA monolayer. Therefore, an excess amount of MSA present in the subphase is detrimental to the incorporation of gold particles. The study on the monolayer behavior also shows that the pi-A isotherm of the ODA monolayer shifts right when small amounts of Au NPs or free MSA molecules are incorporated. However, when larger amounts of particles are adsorbed at the air/liquid interface, a left shift of the pi-A isotherm appears, probably due to the adsorption of ODA molecules onto the particle surface and the transferring of the particles from beneath the ODA monolayer to the air/water interface. According to the present method, it is possible to prepare uniform particulate films of controlled densities by controlling the particle concentration in the subphase, the MSA concentration, and the surface pressure of a mixed monolayer.     

十八胺单分子膜的研究

通过测定在纯水和CdCl2溶液亚相上十八胺单分子膜的平衡、循环π～A等温线及其动态弹性,发现在亚相中加入Cd2+可以使膜的液态相凝聚性增强,固态相凝聚性减弱.液态的单分子膜在两种亚相上有较好的可回复性,而在固态膜中则不然.这可归因于在水面上十八胺分子间可形成氢键,而在CdCl2水溶液亚相上的十八胺则与Cd2+发生配位,形成了多配位络合物,两种情况下十八胺分子在高膜压区都会发生稳定的聚集.静、动态弹性的比较表明,膜障的振动不利于十八胺分子与Cd2+间的配位作用.     

Langmuir–Blodgett films of octadecanethiol on gold sols subphase

An octadecanethiol monolayer was formed on an aqueous gold sols subphase, it’s LB films were characterized by means of π-A isotherms, TEM (transmission electron microscopy), XRD (X-ray diffraction) and UV–Vis spectroscopy.     

Organization of complex monolayers by matrix controlled adsorption

Complex monolayers can be organized at the air | water interface by adsorption of a water-soluble, negatively charged porphyrin dye from the aqueous subphase to a matrix monolayer containing positively charged head groups at the surface of the solution. The organization of the complex monolayer depends on the composition of the matrix monolayer which controls the molecular interactions with the dissolved porphyrin. Surface pressure versus area isotherms in combination with measurement of the enhanced light reflection from the interface in the presence of the porphyrin provides information on the packing and orientation of the chromophores. In an optimal situation, the surface density of the positively charged head groups matches the surface density of the negative charges in the densely packed porphyrins attached to the matrix monolayer, and neutral molecules in the monolayer occupy the free space to provide a dense packing of the matrix.     

Interactions and reactions of monolayers and Langmuir-Blodgett multilayers with compounds in the bulk phase

Studies performed on the interactions and reactions of compounds in the bidimensional state, essentially in monolayers and Langmuir-Blodgett multilayers, with substances in the aqueous subphase are reported. More precisely, the following is illustrated: (i) interactions between acid amphiphiles and prevalently bivalent ions placed in the aqueous support and between compounds capable of functioning like ion carriers in monolayers and ions in the subphase, in order to build mimetic membranes capable of selective ion transport; and the complexation of amphiphiles in monolayer with ions in the bulk liquid phase, in order to build chemical sensors to ions; (ii) the reactions of photoinduced electron transfer between a partner in mono- or multimolecular films and a partner in the subphase, which may determine the fundamental parameters and the differences with the same reactions in the bulk phase; and (iii) the reactions of enzymatic hydrolysis between the monolayer of a glyceride, which constitutes the reaction support, and the enzyme in the liquid bulk phase, which constitutes the subphase. The mechanism of the reactions and its inhibition are clarified. To conclude, possible future developments connected with the areas studied are examined.     

亚相pH对气水界面上VE/DPPC单分子膜的影响

通过表面压－分子面积等温线的测定，考察了亚相ｐＨ对气水界面上的维生素Ｅ（ＶＥ）／二棕榈酰基磷脂酰胆碱单分子膜的影响。亚相ｐＨ降低不改变ＤＰＰＣ单分子膜的崩裂压，但使ＶＥ单分子膜的崩裂压明显增大，不改变ＶＥ单分子膜的平均分子面积，但使ＤＰＰＣ单分子膜凝缩，低表面压下，ＶＥ对ＤＰＰＣ单分子膜的膨胀作用在纯水上很小，在ｐＨ为１的亚相上则很明显，这提示在低ｐＨ的亚相上，ＶＥ／ＤＰＰＣ单分子膜中的极性头基间     

Study of pH-sensitive copolymer/phospholipid complexes using the langmuir balance technique: effect of anchoring sequence and copolymer molecular weight

The behavior of three copolymers of N-isopropylacrylamide (NIPAM), methacrylic acid (MAA), and hydrophobic moiety was studied at phospholipid monolayer/subphase interfaces. The hydrophobic moieties, N-terminal dioctadecylamine (DODA) and random octadecylacrylate (ODA), were used as anchoring groups. The interactions between a 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC) monolayer and the copolymers were studied using the Langmuir balance technique. The effect of subphase pH, distribution of anchors along the copolymer chain, and copolymer molecular weight on the nature of the interactions between the copolymer chains and the DSPC monolayer were investigated. A first-order kinetics model was used to analyze the copolymers adsorption at the DSPC monolayer/subphase interface and allowed the interaction area between the copolymer chains and the DSPC monolayer, A(x), to be determined. The interaction area appears to depend on the subphase pH and the copolymer molecular weight. On decreasing pH, the interaction area of high molecular weight copolymers increases significantly; this is consistent with the copolymer chain phase transition from an extended coil to a collapsed globule while pH is lowered. In the latter conformation, strong hydrophobic attractive interactions between the copolymer chains and the hydrophobic part of the DSPC monolayer favor the copolymer intercalation, which could eventually provoke the phospholipidic layer destabilization or rupture.     

Monolayers of mono- and bidisperse spherical polymer particles at the air/water interface and Langmuir-Blodgett layers on solid substrates

Monodisperse spherical polymer particles with anionic and cationic shells were studied for their monolayer formation and compression behaviour on an aqueous subphase as a function of pH and salt (KCl) concentration. In addition, monolayers of monodisperse and bidisperse mixtures of 434 and 214 nm sized anionic particles were studied for their morphology by scanning electron microscopy (SEM). The anionic particles were prepared by soap-free emulsion polymerization of styrene and acrylic acid, and the cationic particles from styrene and 2-acryloxyethyl trimethylammonium chloride. Independent of the chemical nature of the shell, the particles formed monolayers at high salt or acid concentration in the subphase. However, at neutral pH and if no salt was present in the subphase only a part of the spheres formed monolayers, while the residual particles disappeared into the subphase. The origin of this behaviour is discussed in terms of ionization and electrostatic shielding of the polar groups.Compressed monolayers of monodisperse particles consisted of randomly oriented domains of up to 20 particles with small holes in between, the holes not exceeding two particle diameters in size. Films of bidisperse mixtures were highly disordered. If small particles were present in excess, they formed a fairly disordered monolayer and the large particles were situated on top or below this layer. If the number ratio of both sorts of particles approached unity, the texture became disordered and bi- and multilayered aggregates were observed.     

表面活性素单分子膜在空气/水界面的迟滞现象

表面活性素是一类具有较强表面活性的微生物脂肽类化合物,能在空气/水界面形成不溶性单分子膜.利用Langmuir膜天平测定了表面活性素单分子膜的压缩-扩张循环曲线,发现单分子膜在经历了“平台区”后出现较大的迟滞环,迟滞环的形状与亚相pH有关.将“平台区”的单分子膜转移到云母表面后,用原子力显微镜(AFM)和扫描电子显微镜(SEM)均观察到高度达几十至数百纳米的表面聚集体,说明表面活性素在单分子膜的“平台区”伴随着自聚集.研究结果表明,表面活性素单分子膜在空气/水界面的迟滞现象是分子浸入亚相和形成三维表面聚集体共同作用的结果.     

Fabrication of an electrode-viologen-hydrogenase heterogeneous system and the electrochemical hydrogen evolution

An indium tinoxide (ITO) electrode was chemically modified by one layer of viologen (VIO) deri vative, which possessed a persistent and reproducible electrochemical response. A monolayer of a thermal stable hydrogenase from Thiocapsa roseopersic ina was stabilized on a synthesized poly-l-lysine subphase surface and transferred on to the electrode for fabrication of an ITO-VIO-hydrogenase heterogeneous system. Electrochemical properties of both the ITO-VIO monolayer and the heterogeneous ITO-VIO-hydrogenase system have been investigated. Hydrogen evolution could be measured by potentiostating the VIO-hydrogenase-covered ITO electrode to “electroplate” [(VIO⁺)_n]_surf and a large increase in hydrogen evolution was observed when using an electrolytesolution containing sodium dithionite. We discuss the possible electron transfer process.     

Effects of Calcium Ions on Thermodynamic Properties of Mixed Bilirubin/Cholesterol Monolayers

The mixed monolayer behavior of bilirubin/cholesterol was studied through surface pressure-area (?-A) isotherms on aqueous solutions containing various concentrations of calcium ions. Based on the data of ?-A isotherms, the mean area per molecule, collapse pressure, surface compressibility modulus, excess molecular areas, free energy of mixing, and excess free energy of mixing of the monolayers on different subphases were calculated. The results show an expansion in the structure of the mixed monolayer with Ca2+ in subphase, and non-ideal mixing of the components at the air/water interface is observed with positive deviation from the additivity rule in the excess molecular areas. The miscibility between the components is weakened with the increase of concentration of Ca2+ in subphase. The facts indicate the presence of coordination between Ca2+ and the two components. The mixed monolayer, in which the molar ratio of bilirubin to cholesterol is 3:2, is more stable from a thermodynamic point of view on pure water. But the stable 3:2 stoichiometry complex is destroyed with the increase of the concentration of Ca2+ in subphase. Otherwise, the mixed monolayers have more thermodynamic stability at lower surface pressure on Ca2+ subphase.     

Temperature dependence of poloxamer insertion into and squeeze-out from lipid monolayers

F68, a triblock copolymer of the form poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), is found to effectively seal damaged cell membranes. To better understand the molecular interaction between F68 and cells, we have modeled the outer leaflet of a cell membrane with a dipalmitoylphosphatidylcholine (DPPC) monolayer spread at the air-water interface and introduced poloxamer into the subphase. Subsequent interactions of the polymer with the monolayer either upon expansion or compression were monitored using concurrent Langmuir isotherm and fluorescence microscopy measurements. To alter the activity of the poloxamer, a range of subphase temperatures from 5 to 37 degrees C was used. Lower temperatures increase the solubility of the poloxamer in the subphase and therefore lessen the amount of material at the interface, resulting in a lower equilibrium spreading pressure. Additionally, changes in temperature affect the phase behavior of DPPC. Below the triple point, the monolayer is condensed at pertinent polymer insertion pressures; for temperatures immediately above the triple point, the monolayer is a heterogeneous mix of liquid expanded and condensed phase; for the highest temperature measured, the DPPC monolayer remains completely fluid. At all temperatures, F68 inserts into DPPC monolayers at its equilibrium spreading pressure. Upon compression of the monolayer, polymers are squeezed-out at surface pressures notably higher than those for insertion, with higher temperatures leading to a higher squeeze-out pressure. An increase in temperature decreases the solvent quality of water for the poloxamer, lowering solubility of the polymer in the subphase and thus increasing its propensity to be maintained within the monolayer to higher pressures.     

Surface pressure‐area curves compression isotherm of sericin Langmuir monolayer

The Langmuir monolayer of sericin protein was studied by means of surface pressure (π)—molecular area (A) isotherms at different pH subphase. The monolayer of sericin exhibits typical phase transition phenomena at pH 2, pH 4.8, pH 7 and pH 11, respectively, including from gas state to gas‐liquid state and finally to condensed solid state. However, the monolayer of sericin on pH 11 subphase appears to be solid state. Copyright © 2007 John Wiley & Sons, Ltd.     

Lateral reorganization of myelin lipid domains by myelin basic protein studied at the air-water interface

It has been speculated that adsorption of myelin basic protein (MBP) to the myelin lipid membrane leads to lateral reorganization of the lipid molecules within the myelin membrane. This hypothesis was tested in this study by surface pressure measurement and fluorescent imaging of a monolayer composed of a myelin lipid mixture. The properties of the lipid monolayer before and after addition of MBP into the subphase were monitored. Upon addition of MBP to the monolayer subphase, the surface pressure rose and significant rearrangement of the lipid domains was observed. These results suggest that binding and partial insertion of MBP into the lipid monolayer led to dramatic rearrangement and morphological changes of the lipid domains. A model of adsorption of MBP to the lipid domains and subsequent domain fusion promoted by minimization of electrostatic repulsion between the domains was proposed to account for the experimental observations. The significance of these results in light of the role of MBP in maintaining the myelin structural integrity is discussed.     

Nonequilibrium 2-hydroxyoctadecanoic acid monolayers: effect of electrolytes

2-Hydroxyacids display complex monolayer phase behavior due to the additional hydrogen bonding afforded by the presence of the second hydroxy group. The placement of this group at the position α to the carboxylic acid functionality also introduces the possibility of chelation, a utility important in crystallization including biomineralization. Biomineralization, like many biological processes, is inherently a nonequilibrium process. The nonequilibrium monolayer phase behavior of 2-hydroxyoctadecanoic acid was investigated on each of pure water, calcium chloride, sodium bicarbonate and calcium carbonate crystallizing subphases as a precursor study to a model calcium carbonate biomineralizing system, each at a pH of ～6. The role of the bicarbonate co-ion in manipulating the monolayer structure was determined by comparison with monolayer phase behavior on a sodium chloride subphase. Monolayer phase behavior was probed using surface pressure/area isotherms, surface potential, Brewster angle microscopy, and synchrotron-based grazing incidence X-ray diffraction and X-ray reflectivity. Complex phase behavior was observed for all but the sodium chloride subphase with hydrogen bonding, electrostatic and steric effects defining the symmetry of the monolayer. On a pure water subphase hydrogen bonding dominates with three phases coexisting at low pressures. Introduction of calcium ions into the aqueous subphase ensures strong cation binding to the surfactant head groups through chelation. The monolayer becomes very unstable in the presence of bicarbonate ions within the subphase due to short-range hydrogen bonding interactions between the monolayer and bicarbonate ions facilitated by the sodium cation enhancing surfactant solubility. The combined effects of electrostatics and hydrogen bonding are observed on the calcium carbonate crystallizing subphase.     

Metal ion-induced H-aggregation of a water-soluble anionic dye Congo red (CR) in Langmuir–Blodgett (LB) film

Present communication reports the preparation of Langmuir monolayer of water-soluble anionic dye Congo red (CR) by allowing it to adsorb from the aqueous subphase onto the preformed Langmuir monolayer of anionic stearic acid using divalent metal cations Mg²⁺ as mediator. Isotherm and compressibility studies of SA-Mg-CR hybrid monolayer gave valuable information about the molecular organisation in the Langmuir monolayer. Absorption spectroscopic studies revealed the formation of H-aggregates in the hybrid Langmuir–Blodgett (LB) films fabricated at lower salt concentration in the subphase. Atomic Force Microscopic image gave visual evidence of distinct nanocrystalline domains in the LB monolayer film.     

Equilibrium structure and dynamics of (2R, 3R)-(+)-bis(decyloxy)succinic acid at the air-water interface

A twin-tailed, twin-chiral fatty acid, (2R,3R)-(+)-bis(decyloxy)succinic acid was synthesized and its two dimensional behavior at the air-water interface was examined. The pH of the subphase had a profound effect on the monolayer formation. On acidic subphase, stable monolayers with increased area per molecule due to hydrogen bonding and bilayers at collapse pressures were observed. Highly compressible films were formed at 40 degrees C, while stable monolayers with increased area were observed at sub-room temperatures. Langmuir monolayers formed on subphases containing 1 mM ZnCl2 and CaCl2 revealed two dimensional metal complex formation with Zn2+ forming a chelate-type complex, while Ca2+ formed an ionic-type complex. Monolayers transferred from the condensed phase onto hydrophilic Si(100) and quartz substrates revealed the formation of bilayers through transfer-induced monolayer buckling. Compression induced crystallites in 2D from monolayers and vesicle-like supramolecular structures from multilayers were the noted LB film characteristics, adopting optical imaging and electron microscopy. The interfacial monolayer structure studied through molecular dynamics simulation revealed the order and packing at a molecular level; monolayers adsorbed at various simulated specific areas of the molecule corroborated the (pi-A) isotherm and the formation of a hexagonal lattice at the air-water interface.