High‐Rate,Tunable Syngas Production with Artificial Photosynthetic Cells

An artificial photosynthetic (APS) system consisting of a photoanodic semiconductor that harvests solar photons to split H₂O, a Ni‐SNG cathodic catalyst for the dark reaction of CO₂ reduction in a CO₂‐saturated NaHCO₃ solution, and a proton‐conducting membrane enabled syngas production from CO₂ and H₂O with solar‐to‐syngas energy‐conversion efficiency of up to 13.6 %. The syngas CO/H₂ ratio was tunable between 1:2 and 5:1. Integration of the APS system with photovoltaic cells led to an impressive overall quantum efficiency of 6.29 % for syngas production. The largest turnover frequency of 529.5 h^?1 was recorded with a photoanodic N‐TiO₂ nanorod array for highly stable CO production. The CO‐evolution rate reached a maximum of 154.9 mmol g^?1 h^?1 in the dark compartment of the APS cell. Scanning electrochemical–atomic force microscopy showed the localization of electrons on the single‐nickel‐atom sites of the Ni‐SNG catalyst, thus confirming that the multielectron reduction of CO₂ to CO was kinetically favored.     

High‐Rate,Tunable Syngas Production with Artificial Photosynthetic Cells

An artificial photosynthetic (APS) system consisting of a photoanodic semiconductor that harvests solar photons to split H₂O, a Ni‐SNG cathodic catalyst for the dark reaction of CO₂ reduction in a CO₂‐saturated NaHCO₃ solution, and a proton‐conducting membrane enabled syngas production from CO₂ and H₂O with solar‐to‐syngas energy‐conversion efficiency of up to 13.6 %. The syngas CO/H₂ ratio was tunable between 1:2 and 5:1. Integration of the APS system with photovoltaic cells led to an impressive overall quantum efficiency of 6.29 % for syngas production. The largest turnover frequency of 529.5 h^?1 was recorded with a photoanodic N‐TiO₂ nanorod array for highly stable CO production. The CO‐evolution rate reached a maximum of 154.9 mmol g^?1 h^?1 in the dark compartment of the APS cell. Scanning electrochemical–atomic force microscopy showed the localization of electrons on the single‐nickel‐atom sites of the Ni‐SNG catalyst, thus confirming that the multielectron reduction of CO₂ to CO was kinetically favored.     

Reducing the Cost and Preserving the Reactivity in Noble‐Metal‐Based Catalysts: Oxidation of CO by Pt and Al–Pt Alloy Clusters Supported on Graphene

The oxidation mechanisms of CO to CO₂ on graphene‐supported Pt and Pt‐Al alloy clusters are elucidated by reactive dynamical simulations. The general mechanism evidenced is a Langmuir–Hinshelwood (LH) pathway in which O₂ is adsorbed on the cluster prior to the CO oxidation. The adsorbed O₂ dissociates into two atomic oxygen atoms thus promoting the CO oxidation. Auxiliary simulations on alloy clusters in which other metals (Al, Co, Cr, Cu, Fe, Ni) replace a Pt atom have pointed to the aluminum doped cluster as a special case. In the nanoalloy, the reaction mechanism for CO oxidation is still a LH pathway with an activation barrier sufficiently low to be overcome at room temperature, thus preserving the catalyst efficiency. This provides a generalizable strategy for the design of efficient, yet sustainable, Pt‐based catalysts at reduced cost.     

catena‐Poly[[diaquadiisothiocyanatoiron(II)]‐μ‐4,4′‐bi‐1,2,4‐triazole]: a one‐dimensional coordination polymer

In the title complex, [Fe(NCS)₂(C₄H₂N₆)₂(H₂O)₂]_n, the Fe^II atom is on an inversion centre and the 4,4′‐bi‐1,2,4‐triazole (btr) group is bisected by a twofold axis through the central N—N bond. The coordination geometry of the Fe^II atom is elongated distorted FeN₄O₂ octahedral, where the cation is coordinated by two N atoms from the triazole rings of two btr groups, two N atoms from NCS⁻ ligands and two water molecules. Btr is a bidentate ligand, coordinating one Fe^II atom through a peripheral N atom of each triazole ring, leading to a one‐dimensional polymeric (chain) structure extending along [101]. The chains are further connected through a network of O—H...N and C—H...S hydrogen bonds.     

Metal–Organic‐Framework‐Derived Hollow N‐Doped Porous Carbon with Ultrahigh Concentrations of Single Zn Atoms for Efficient Carbon Dioxide Conversion

The development of efficient and low energy‐consumption catalysts for CO₂ conversion is desired, yet remains a great challenge. Herein, a class of novel hollow porous carbons (HPC), featuring well dispersed dopants of nitrogen and single Zn atoms, have been fabricated, based on the templated growth of a hollow metal–organic framework precursor, followed by pyrolysis. The optimized HPC‐800 achieves efficient catalytic CO₂ cycloaddition with epoxides, under light irradiation, at ambient temperature, by taking advantage of an ultrahigh loading of (11.3 wt %) single‐atom Zn and uniform N active sites, high‐efficiency photothermal conversion as well as the hierarchical pores in the carbon shell. As far as we know, this is the first report on the integration of the photothermal effect of carbon‐based materials with single metal atoms for catalytic CO₂ fixation.     

Di­chloro­(methanol‐κO)[(methoxy)tris(1‐methyl‐1H‐imidazol‐2‐yl)­methane‐κ2N3]­iron(II) (ca 153 K)

In the quasi‐trigonal–bipyramidal environment of the five‐coordinate Fe^II atom in the title compound, [FeCl₂(C₁₄H₁₈N₆O)(CH₄O)], the methanol and one of the N‐atom donors of the potentially tridentate ligand are disposed axially: Fe—N(axial) is 2.149 (2) Å, Fe—N(equatorial) is 2.108 (2) Å and N—Fe—O is 174.14 (7)°.     

A Comparative Study of CO Oxidation on Nitrogen‐ and Phosphorus‐Doped Graphene

The geometry, electronic structure, and catalytic properties of nitrogen‐ and phosphorus‐doped graphene (N‐/P‐graphene) are investigated by density functional theory calculations. The reaction between adsorbed O₂ and CO molecules on N‐ and P‐graphene is comparably studied via Langmuir–Hinshelwood (LH) and Eley–Rideal (ER) mechanisms. The results indicate that a two‐step process can occur, namely, CO+O₂→CO₂+O_ads and CO+O_ads→CO₂. The calculated energy barriers of the first step are 15.8 and 12.4 kcal mol^?1 for N‐ and P‐graphene, respectively. The second step of the oxidation reaction on N‐graphene proceeds with an energy barrier of about 4 kcal mol^?1. It is noteworthy that this reaction step was not observed on P‐graphene because of the strong binding of O_ads species on the P atoms. Thus, it can be concluded that low‐cost N‐graphene can be used as a promising green catalyst for low‐temperature CO oxidation.     

Linkage Effect in the Heterogenization of Cobalt Complexes by Doped Graphene for Electrocatalytic CO2 Reduction

Immobilization of planar Co^II‐2,3‐naphthalocyanine (NapCo) complexes onto doped graphene resulted in a heterogeneous molecular Co electrocatalyst that was active and selective to reduce CO₂ into CO in aqueous solution. A systematic study revealed that graphitic sulfoxide and carboxyl dopants of graphene were the efficient binding sites for the immobilization of NapCo through axial coordination and resulted in active Co sites for CO₂ reduction. Compared to carboxyl dopants, the sulfoxide dopants further improved the electron communication between NapCo and graphene, which led to the increase of turnover frequency of the Co sites by about 3 times for CO production with a Faradic efficiency up to 97 %. Pristine NapCo in the absence of a graphene support did not display efficient electron communication with the electrode and thus failed to serve as the electrochemical active site for CO₂ reduction under the identical conditions.     

Bottom‐Up Fabrication of a Sandwich‐Like Carbon/Graphene Heterostructure with Built‐In FeNC Dopants as Non‐Noble Electrocatalyst for Oxygen Reduction Reaction

High‐performance non‐noble electrocatalysts for oxygen reduction reaction (ORR) are the prerequisite for large‐scale utilization of fuel cells. Herein, a type of sandwiched‐like non‐noble electrocatalyst with highly dispersed FeN_x active sites embedded in a hierarchically porous carbon/graphene heterostructure was fabricated using a bottom‐up strategy. The in situ ion substitution of Fe³⁺ in a nitrogen‐containing MOF (ZIF‐8) allows the Fe‐heteroatoms to be uniformly distributed in the MOF precursor, and the assembly of Fe‐doped ZIF‐8 nano‐crystals with graphene‐oxide and in situ reduction of graphene‐oxide afford a sandwiched‐like Fe‐doped ZIF‐8/graphene heterostructure. This type of heterostructure enables simultaneous optimization of FeN_x active sites, architecture and interface properties for obtaining an electron‐catalyst after a one‐step carbonization. The synergistic effect of these factors render the resulting catalysts with excellent ORR activities. The half‐wave potential of 0.88 V vs. RHE outperforms most of the none‐noble metal catalyst and is comparable with the commercial Pt/C (20 wt %) catalyst. Apart from the high activity, this catalyst exhibits excellent durability and good methanol‐tolerance. Detailed investigations demonstrate that a moderate content of Fe dopants can effectively increase the intrinsic activities, and the hybridization of graphene can enhance the reaction kinetics of ORR. The strategy proposed in this work gives an inspiration towards developing efficient noble‐metal‐free electrocatalysts for ORR.     

Isolated Diatomic Ni‐Fe Metal–Nitrogen Sites for Synergistic Electroreduction of CO2

Polynary single‐atom structures can combine the advantages of homogeneous and heterogeneous catalysts while providing synergistic functions based on different molecules and their interfaces. However, the fabrication and identification of such an active‐site prototype remain elusive. Here we report isolated diatomic Ni‐Fe sites anchored on nitrogenated carbon as an efficient electrocatalyst for CO₂ reduction. The catalyst exhibits high selectivity with CO Faradaic efficiency above 90 % over a wide potential range from ?0.5 to ?0.9 V (98 % at ?0.7 V), and robust durability, retaining 99 % of its initial selectivity after 30 hours of electrolysis. Density functional theory studies reveal that the neighboring Ni‐Fe centers not only function in synergy to decrease the reaction barrier for the formation of COOH* and desorption of CO, but also undergo distinct structural evolution into a CO‐adsorbed moiety upon CO₂ uptake.     

X‐Ray Near‐Edge Absorption Study of Temperature‐Induced Low‐Spin‐to‐High‐Spin Change in Metallo‐Supramolecular Assemblies

X‐ray absorption near the iron K edge (XANES) was used to investigate the characteristics of temperature‐induced low‐spin‐to‐high‐spin change (SC) in metallo‐supramolecular polyelectrolyte amphiphile complexes (PAC) containing FeN₆ octahedra attached to two or six amphiphilic molecules. Compared to the typical spin‐crossover material Fe(phen)₂(NCS)₂ XANES spectra of PAC show fingerprint features restricted to the near‐edge region which mainly measures multiple scattering (MS) events. The changes of the XANES profiles during SC are thus attributed to the structure changes due to different MS path lengths. Our results can be interpreted by a uniaxial deformation of FeN₆ octahedra in PAC. This is in agreement with the prediction that SC is originated by a structural phase transition in the amphiphilic matrix of PAC, but in contrast to Fe(phen)₂(NCS)₂, showing the typical spin crossover being associated with shortening of all the metal–ligand distances.     

Highly Efficient CO2 Electroreduction on ZnN4‐based Single‐Atom Catalyst

The electrochemical reduction reaction of carbon dioxide (CO2RR) to carbon monoxide (CO) is the basis for the further synthesis of more complex carbon‐based fuels or attractive feedstock. Single‐atom catalysts have unique electronic and geometric structures with respect to their bulk counterparts, thus exhibiting unexpected catalytic activities. A nitrogen‐anchored Zn single‐atom catalyst is presented for CO formation from CO2RR with high catalytic activity (onset overpotential down to 24 mV), high selectivity (Faradaic efficiency for CO (FE_CO) up to 95 % at ?0.43 V), remarkable durability (>75 h without decay of FE_CO), and large turnover frequency (TOF, up to 9969 h^?1). Further experimental and DFT results indicate that the four‐nitrogen‐anchored Zn single atom (Zn‐N₄) is the main active site for CO2RR with low free energy barrier for the formation of *COOH as the rate‐limiting step.     

Synthesis and characterization of (cryptand‐222)potassium (2‐methylimidazolato)(meso‐tetraphenylporphinato)ferrate(II)–2‐methylimidazole–tetrahydrofuran (1/1/2)

Metalloporphyrin complexes containing an additional imidazole ligand can provide information about the effect of deprotonation or hydrogen bonding on the axial histidine unit in heme proteins. The title high‐spin five‐coordinate imidazolate‐ligated iron(II) porphyrinate, [K(C₁₈H₃₆N₂O₆)][Fe(C₄H₅N₂)(C₄₄H₂₈N₄)]·C₄H₆N₂·2C₄H₈O, has been synthesized and investigated. The solvated salt crystallizes with one 2‐methylimidazole molecule, two tetrahydrofuran solvent molecules and a potassium cation chelated inside a cryptand‐222 (4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane) molecule. The imidazolate ligand is ordered. The average Fe—Np (Np is a porphyrin N atom) bond length is 2.113 (11) Å and the axial Fe—N_Im (N_Im is an imidazolate N atom) is 2.0739 (13) Å. The out‐of‐plane displacement of the Fe^II atom from the 24‐atom mean plane is 0.6098 (5) Å, indicating an apparent doming of the porphyrin core.     

Elucidating the Structural Composition of an Fe–N–C Catalyst by Nuclear‐ and Electron‐Resonance Techniques

Fe–N–C catalysts are very promising materials for fuel cells and metal–air batteries. This work gives fundamental insights into the structural composition of an Fe–N–C catalyst and highlights the importance of an in‐depth characterization. By nuclear‐ and electron‐resonance techniques, we are able to show that even after mild pyrolysis and acid leaching, the catalyst contains considerable fractions of α‐iron and, surprisingly, iron oxide. Our work makes it questionable to what extent FeN₄ sites can be present in Fe–N–C catalysts prepared by pyrolysis at 900 °C and above. The simulation of the iron partial density of phonon states enables the identification of three FeN₄ species in our catalyst, one of them comprising a sixfold coordination with end‐on bonded oxygen as one of the axial ligands.     

From Metal–Organic Frameworks to Single‐Atom Fe Implanted N‐doped Porous Carbons: Efficient Oxygen Reduction in Both Alkaline and Acidic Media

It remains highly desired but a great challenge to achieve atomically dispersed metals in high loadings for efficient catalysis. Now porphyrinic metal–organic frameworks (MOFs) have been synthesized based on a novel mixed‐ligand strategy to afford high‐content (1.76 wt %) single‐atom (SA) iron‐implanted N‐doped porous carbon (Fe_SA‐N‐C) via pyrolysis. Thanks to the single‐atom Fe sites, hierarchical pores, oriented mesochannels and high conductivity, the optimized Fe_SA‐N‐C exhibits excellent oxygen reduction activity and stability, surpassing almost all non‐noble‐metal catalysts and state‐of‐the‐art Pt/C, in both alkaline and more challenging acidic media. More far‐reaching, this MOF‐based mixed‐ligand strategy opens a novel avenue to the precise fabrication of efficient single‐atom catalysts.     

Unraveling the Nature of Sites Active toward Hydrogen Peroxide Reduction in Fe‐N‐C Catalysts

Fe‐N‐C catalysts with high O₂ reduction performance are crucial for displacing Pt in low‐temperature fuel cells. However, insufficient understanding of which reaction steps are catalyzed by what sites limits their progress. The nature of sites were investigated that are active toward H₂O₂ reduction, a key intermediate during indirect O₂ reduction and a source of deactivation in fuel cells. Catalysts comprising different relative contents of FeN_x C_y moieties and Fe particles encapsulated in N‐doped carbon layers (0–100 %) show that both types of sites are active, although moderately, toward H₂O₂ reduction. In contrast, N‐doped carbons free of Fe and Fe particles exposed to the electrolyte are inactive. When catalyzing the ORR, FeN_x C_y moieties are more selective than Fe particles encapsulated in N‐doped carbon. These novel insights offer rational approaches for more selective and therefore more durable Fe‐N‐C catalysts.     

Reaction Mechanism of Methanol to Formaldehyde over Fe‐ and FeO‐Modified Graphene

We employed periodic DFT calculations (PBE‐D2) to investigate the catalytic conversion of methanol over graphene embedded with Fe and FeO. Two possible pathways of dehydrogenation to formaldehyde and dehydration to dimethyl ether (DME) over these catalysts were examined. Both processes are initiated with the activation of methanol over the catalytic center through O?H cleavage. As a result, a methoxo‐containing intermediate is formed. Subsequently, H‐transfer from the methoxy to the adjacent ligand leads to the formation of formaldehyde. Conversely, the activation of the second methanol over the intermediate gives DME and H₂O. Over Fe/graphene, the dehydration process is kinetically and thermodynamically preferable. Unlike Fe/graphene, FeO/graphene is predicted to be an efficient catalyst for the dehydrogenation process. Oxidative dehydrogenation over FeO/graphene takes place through two steps with free energy barriers of 5.7 and 10.2 kcal mol^?1.     

Controlled Synthesis of a Vacancy‐Defect Single‐Atom Catalyst for Boosting CO2 Electroreduction

The reaction of precursors containing both nitrogen and oxygen atoms with Ni^II under 500 °C can generate a N/O mixing coordinated Ni‐N₃O single‐atom catalyst (SAC) in which the oxygen atom can be gradually removed under high temperature due to the weaker Ni?O interaction, resulting in a vacancy‐defect Ni‐N₃‐V SAC at Ni site under 800 °C. For the reaction of Ni^II with the precursor simply containing nitrogen atoms, only a no‐vacancy‐defect Ni‐N₄ SAC was obtained. Experimental and DFT calculations reveal that the presence of a vacancy‐defect in Ni‐N₃‐V SAC can dramatically boost the electrocatalytic activity for CO₂ reduction, with extremely high CO₂ reduction current density of 65 mA cm^?2 and high Faradaic efficiency over 90 % at ?0.9 V vs. RHE, as well as a record high turnover frequency of 1.35×10⁵ h^?1, much higher than those of Ni‐N₄ SAC, and being one of the best reported electrocatalysts for CO₂‐to‐CO conversion to date.     

Atomically Dispersed Nickel(I) on an Alloy‐Encapsulated Nitrogen‐Doped Carbon Nanotube Array for High‐Performance Electrochemical CO2 Reduction Reaction

Single‐atom catalysts (SACs) show great promise for electrochemical CO₂ reduction reaction (CRR), but the low density of active sites and the poor electrical conduction and mass transport of the single‐atom electrode greatly limit their performance. Herein, we prepared a nickel single‐atom electrode consisting of isolated, high‐density and low‐valent nickel(I) sites anchored on a self‐standing N‐doped carbon nanotube array with nickel–copper alloy encapsulation on a carbon‐fiber paper. The combination of single‐atom nickel(I) sites and self‐standing array structure gives rise to an excellent electrocatalytic CO₂ reduction performance. The introduction of copper tunes the d‐band electron configuration and enhances the adsorption of hydrogen, which impedes the hydrogen evolution reaction. The single‐nickel‐atom electrode exhibits a specific current density of ?32.87 mA cm^?2 and turnover frequency of 1962 h^?1 at a mild overpotential of 620 mV for CO formation with 97 % Faradic efficiency.     

Regulating the Coordination Environment of MOF‐Templated Single‐Atom Nickel Electrocatalysts for Boosting CO2 Reduction

The general synthesis and control of the coordination environment of single‐atom catalysts (SACs) remains a great challenge. Herein, a general host–guest cooperative protection strategy has been developed to construct SACs by introducing polypyrrole (PPy) into a bimetallic metal–organic framework. As an example, the introduction of Mg²⁺ in MgNi‐MOF‐74 extends the distance between adjacent Ni atoms; the PPy guests serve as N source to stabilize the isolated Ni atoms during pyrolysis. As a result, a series of single‐atom Ni catalysts (named Ni_SA‐N_x‐C) with different N coordination numbers have been fabricated by controlling the pyrolysis temperature. Significantly, the Ni_SA‐N₂‐C catalyst, with the lowest N coordination number, achieves high CO Faradaic efficiency (98 %) and turnover frequency (1622 h^?1), far superior to those of Ni_SA‐N₃‐C and Ni_SA‐N₄‐C, in electrocatalytic CO₂ reduction. Theoretical calculations reveal that the low N coordination number of single‐atom Ni sites in Ni_SA‐N₂‐C is favorable to the formation of COOH* intermediate and thus accounts for its superior activity.