Enantioselective Synthesis of Allylboronates and Allylic Alcohols by Copper‐Catalyzed 1,6‐Boration

Chiral secondary allylboronates are obtained in high enantioselectivities and 1,6:1,4 ratios by the copper‐catalyzed 1,6‐boration of electron‐deficient dienes with bis(pinacolato)diboron (B₂(pin)₂). The reactions proceed efficiently using catalyst loadings as low as 0.0049 mol %. The allylboronates may be oxidized to the allylic alcohols, and can be used in stereoselective aldehyde allylborations. This process was applied to a concise synthesis of atorvastatin, in which the key 1,6‐boration was performed using only a 0.02 mol % catalyst loading.     

Regio‐ and Stereoselective Allylic Substitutions of Chiral Secondary Alkylcopper Reagents: Total Synthesis of (+)‐Lasiol, (+)‐13‐Norfaranal,and (+)‐Faranal

Chiral secondary alkylcopper reagents were prepared from chiral secondary alkyl iodides by a retentive I/Li exchange followed by a retentive transmetalation with CuBr?P(OEt)₃. Switching the solvent to THF significantly increased their configurational stability and made these copper reagents suitable for regioselective allylic substitutions. The optically enriched copper species underwent S_N2 substitutions with allylic bromides (up to >99 % S_N2 regioselectivity). The addition of ZnCl₂ and the use of chiral allylic phosphates allowed to switch the regioselectivity towards S_N2′ substitution (up to >99 % S_N2′ regioselectivity) and to perform highly selective anti‐S_N2′ substitutions with absolute control over two adjacent stereocenters. This method was applied in the total synthesis of the three ant pheromones (+)‐lasiol, (+)‐13‐norfaranal, and (+)‐faranal (up to 98:2 dr, 99 % ee).     

Copper‐Catalyzed Enantioselective Allyl–Allyl Coupling between Allylic Boronates and Phosphates with a Phenol/N‐Heterocyclic Carbene Chiral Ligand

Copper‐catalyzed enantioselective allyl–allyl coupling between allylboronates and either Z‐acyclic or cyclic allylic phosphates using a new chiral N‐heterocyclic carbene ligand, bearing a phenolic hydroxy, is reported. This reaction occurs with exceptional S_N2′‐type regioselectivities and high enantioselectivities to deliver chiral 1,5‐diene derivatives with a tertiary stereogenic center at the allylic/homoallylic position.     

Iron-catalyzed boration of allylic alcohols with H3BO3 as an additive

A method for the synthesis of allylboronates by iron-catalyzed boration of allylic alcohols with H₃BO₃ as an additive is developed. The introduction of H₃BO₃ promotes the cleavage of C?O bond in allylic alcohols obviously. Functional groups, such as fluoro, chloro, bromo, alkyl, and alkoxy, are tolerated well. Thus, various allylboronates are obtained in acceptable yield.     

Enantioconvergent Palladium-Catalyzed Alkylation of Tertiary Allylic C−H Bonds

Enantioconvergent catalysis enables the conversion of racemic molecules into a single enantiomer in perfect yield and is considered an ideal approach for asymmetric synthesis. Despite remarkable advances in this field, enantioconvergent transformations of inert tertiary C−H bonds remain largely unexplored due to the high bond dissociation energy and the surrounding steric repulsion that pose unparalleled constraints on bond cleavage and formation. Here, we report an enantioconvergent Pd-catalyzed alkylation of racemic tertiary allylic C−H bonds of α-alkenes, providing a unique approach to access a broad range of enantioenriched γ,δ-unsaturated carbonyl compounds featuring quaternary carbon stereocenters. Mechanistic studies reveal that a stereoablative event occurs through the rate-limiting cleavage of tertiary allylic C−H bonds to generate σ-allyl-Pd species, and the achieved E/Z-selectivity of σ-allyl-Pd species effectively regulates the diastereoselectivity via a nucleophile coordination-enabled S_N2′-allylation pathway.     

Asymmetric Traceless Petasis Borono‐Mannich Reactions of Enals: Reductive Transposition of Allylic Diazenes

The traceless Petasis borono‐Mannich reaction of enals, sulfonylhydrazines, and allylboronates, catalyzed by chiral biphenols, results in an asymmetric reductive transposition of the in situ generated allylic diazene. Acyclic 1,4‐diene products bearing either alkyl‐ or aryl‐substituted benzylic stereocenters are afforded in excellent yields and enantiomeric ratios of up to 99:1. The use of crotylboronates in the reaction results in concomitant formation of two stereocenters in either a 1,4‐syn or anti relationship from the corresponding E ‐ or Z ‐crotylboronate used in the reaction. The use of β‐monosubstituted enals in the asymmetric traceless Petasis borono‐Mannich reaction of crotylboronates installs tertiary methyl‐bearing stereocenters in good yields and high enantioselectivities.     

Dual Organocatalysis: Asymmetric Allylic–Allylic Alkylation of α,α‐Dicyanoalkenes and Morita–Baylis–Hillman Carbonates

The first highly enantioselective allylic–allylic alkylation of α,α‐dicyanoalkenes and Morita–Baylis–Hillman carbonates by dual catalysis of (DHQD)₂AQN and (S)‐BINOL has been investigated. Excellent stereoselectivities have been achieved for a broad spectrum of substrates (d.r. > 99:1, up to 99 % ee). The multifunctional allylic products could be efficiently converted to a range of complex chiral cyclic frameworks. EWG=electron‐withdrawing group, (DHQD)₂AQN=hydroquinidine (anthraquinone‐1,4‐diyl) diether, (S)‐BINOL =(S)‐(?)‐1,1′‐bi‐2‐naphthol.

     

Transition-Metal Free Electrophilic Aminations of Polyfunctional O-2,4,6-Trimethylbenzoyl Hydroxylamines with Zinc and Magnesium Organometallics

We reported a new electrophilic amination of various primary, secondary and tertiary alkyl, benzylic, allylic zinc and magnesium organometallics with O-2,4,6-trimethylbenzoyl hydroxylamines (O-TBHAs) in 52–99 % yield. These O-TBHAs displayed an excellent long-term stability and were readily prepared from various highly functionalized secondary amines via a convenient 3 step procedure. The amination reactions showed remarkable chemoselectivity proceeding without any transition-metal catalyst and were usually complete after 1–3 h reaction time at 25 °C. Furthermore, this electrophilic amination also provided access to enantioenriched tertiary amines (up to 88 % ee) by using optically enriched secondary alkylmagnesium reagents of the type s-AlkylMgCH₂SiMe₃.     

Preparation of Polyfunctionalized Aromatic Nitriles from Aryl Oxazolines

A selective ortho,ortho’-functionalization of readily available aryl oxazolines by two successive magnesiations with sBu₂Mg in toluene followed by trapping reactions with electrophiles, such as (hetero)aryl iodides or bromides, iodine, tosyl cyanide, ethyl cyanoformate or allylic bromides (39 examples, 62–99 % yield) is reported. Treatment of these aryl oxazolines with excess oxalyl chloride and catalytic amounts of DMF (50 °C, 4 h) provided the corresponding nitriles (36 examples, 73–99 % yield). Conversions of these nitriles to valuable heterocycles are reported, and a tentative mechanism is proposed.     

Iridium-Catalyzed Enantioselective Intermolecular Indole C2-Allylation

The enantioselective intermolecular C2-allylation of 3-substituted indoles is reported for the first time. This directing group-free approach relies on a chiral Ir-(P, olefin) complex and Mg(ClO₄)₂ Lewis acid catalyst system to promote allylic substitution, providing the C2-allylated products in typically high yields (40–99 %) and enantioselectivities (83–99 % ee) with excellent regiocontrol. Experimental studies and DFT calculations suggest that the reaction proceeds via direct C2-allylation, rather than C3-allylation followed by in situ migration. Steric congestion at the indole-C3 position and improved π–π stacking interactions have been identified as major contributors to the C2-selectivity.     

Nickel-Catalyzed Tunable Enantioconvergence and Kinetic Resolution in the Coupling of Tertiary Cyclobutenols with Arylboroxines

We report that a nickel catalyst system with a modified 1,1′-spirobiindane-7,7′-diol-phosphoramidite (SPINOL) as the chiral ligand can enable the coupling of tertiary cyclobutenols and arylboroxines in an enantioconvergent manner, providing cyclobutenes with an all-carbon quaternary stereocenter in good yields (up to 84 % yield) with excellent enantioselectivities (up to >99 % ee). Moreover, the catalytic system can be applied in the kinetic resolution of cyclobutenols under slightly modified conditions, giving enantioenriched tertiary cyclobutenols with an s factor of up to >200. The reaction uses free hydroxyl groups as the leaving group without additional activation while the strained ring remains untouched. Preliminary mechanistic studies reveal that the inherent discrepant reactivity of the two enantiomers is the key to the controllable enantioconvergent and kinetic resolution process.     

Palladium‐Catalyzed Asymmetric Allylic Alkylations with Toluene Derivatives as Pronucleophiles

The first two highly enantioselective palladium‐catalyzed allylic alkylations with benzylic nucleophiles, activated with Cr(CO)₃, have been developed. These methods enable the enantioselective synthesis of α‐2‐propenyl benzyl motifs, which are important scaffolds in natural products and pharmaceuticals. A variety of cyclic and acyclic allylic carbonates are competent electrophilic partners furnishing the products in excellent enantioselectivity (up to 99 % ee and 92 % yield). This approach was employed to prepare a nonsteroidal anti‐inflammatory drug analogue.     

Iridium‐Catalyzed Enantioselective Intermolecular Indole C2‐Allylation

The enantioselective intermolecular C2‐allylation of 3‐substituted indoles is reported for the first time. This directing group‐free approach relies on a chiral Ir‐(P, olefin) complex and Mg(ClO₄)₂ Lewis acid catalyst system to promote allylic substitution, providing the C2‐allylated products in typically high yields (40–99 %) and enantioselectivities (83–99 % ee) with excellent regiocontrol. Experimental studies and DFT calculations suggest that the reaction proceeds via direct C2‐allylation, rather than C3‐allylation followed by in situ migration. Steric congestion at the indole‐C3 position and improved π–π stacking interactions have been identified as major contributors to the C2‐selectivity.     

Multicomponent Synthesis of Chiral Bidentate Unsymmetrical Unsaturated N‐Heterocyclic Carbenes: Copper‐Catalyzed Asymmetric CC Bond Formation

A multicomponent strategy was applied to the synthesis of chiral bidentate unsaturated hydroxyalkyl‐ and carboxyalkyl‐N‐heterocyclic carbene (NHC) precursors. The newly developed low‐cost chiral ligands derived from amino alcohols and amino acids were evaluated in copper‐catalyzed asymmetric conjugated addition and asymmetric allylic alkylation, which afforded the desired tertiary and quaternary carbon stereocenters with excellent regio‐ and enantioselectivities (up to 99:1 e.r.).     

Copper-catalyzed enantioselective substitution of allylic carbonates with diboron: an efficient route to optically active alpha-chiral allylboronates

A method for the synthesis of alpha-chiral allylboronates featuring the Cu(I)-catalyzed enantioselective substitution of readily available allylic carbonates with a diboron is described. Using this method, various alpha-chiral allylboronates, including functionalized allylboronates, were successfully synthesized, with high enantiomeric purity.     

Stereoconvergent synthesis of chiral allylboronates from an E/Z mixture of allylic aryl ethers using a 6-NHC-Cu(I) catalyst

We present a 6-NHC-Cu(I) complex that provides α-substituted allylboronates using allylic aryl ether substrates. The method was discovered by comparison of the chemoselectivities exhibited by complexes 1a, 1b, 2, and 3. We observed that 1a preferentially reacts with electron-rich alkenes over electron-deficient alkenes. Development of an asymmetric method revealed that 1b reacts with both the E and Z isomers to provide the same absolute configuration without showing E-Z isomerization. This stereoconvergent reaction occurs with high yields (av 86%), high S(N)2' selectivity (>99:1), and high ee (av 94%) and exhibits wide functional-group tolerance using pure E or Z isomer or E/Z alkene mixtures. The stereoconvergent feature enables the use of many different olefination strategies for substrate production, including cross-metathesis. Chiral allylboronates could be purified by silica gel chromatography and stored in the freezer without decomposition.     

Practical procedure for copper(I)-catalyzed allylic boryl substitution with stoichiometric alkoxide base

We have developed a useful procedure for borylation using catalytic CuCl/Xantphos and stoichiometric K(O-t-Bu): the highly versatile method is suitable for the synthesis of allylboronates including those with terminal and internal allylic systems, cyclic structures, and functional groups. Optically active allylboronates were synthesized from prochiral substrates with a chiral diphosphine ligand using this procedure. The reaction rate is generally higher than the original Cu(O-t-Bu)/ligand catalyst system, which we previously reported.     

Copper–Boxmi Complexes as Highly Enantioselective Catalysts for Electrophilic Trifluoromethylthiolations

The enantioselective trifluoromethylthiolation of β‐ketoesters using chiral copper–boxmi complexes as catalysts is reported. A number of α‐SCF₃‐substituted β‐ketoesters have been obtained with up to >99 % enantiomeric excess (ee), and the trifluoromethylthiolated products were then transformed diastereoselectively to α‐SCF₃‐β‐hydroxyesters with two adjacent quaternary stereocenters.     

Synthesis of Branched Alkylboronates by Copper‐Catalyzed Allylic Substitution Reactions of Allylic Chlorides with 1,1‐Diborylalkanes

Reported herein is a copper‐catalyzed S_N2′‐selective allylic substitution reaction using readily accessible allylic chlorides and 1,1‐diborylalkanes, a reaction which proceeds with chemoselective C?B bond activation of the 1,1‐diborylalkanes. In the presence of a catalytic amount of [Cu(IMes)Cl] [IMes=1,3‐bis(2,4,6‐trimethylphenyl)imidazole‐2‐ylidene] and LiOtBu as a base, a range of primary and secondary allylic chlorides undergo the S_N2′‐selective allylic substitution reaction to produce branched alkylboronates. The synthetic utilities of the obtained alkylboronates are also presented.     

Palladium-catalyzed diastereoselective synthesis of homoaldol equivalent products

A palladium-catalyzed reaction of easily accessible 3-(pinacolatoboryl)allyl acetates and aldehydes provides facile access to synthetically useful homoaldol equivalent products with high diastereoselectivity. The reaction presumably proceeds via allylation of aldehydes with α-acetoxy allylboronates that produced in situ by reductive elimination from allylic gem-palladium/boryl intermediates.