Polyampholyte terpolymers of amphoteric,amino acid‐based monomers with acrylamide and (3‐acrylamidopropyl)trimethyl ammonium chloride

Low‐charge‐density amphoteric copolymers and terpolymers composed of acrylamide, (3‐acrylamidopropyl)trimethyl ammonium chloride, and the amino acid derived monomers (e.g., N‐acryloyl valine, N‐acryloyl alanine, and N‐acryloyl aspartate) were prepared via free‐radical polymerization in aqueous media to yield terpolymers with random charge distributions and homogeneous compositions. Sodium formate (NaOOCH) was employed as a chain transfer agent during the polymerization to suppress gel effects and broadening of the molecular weight distribution. Terpolymer compositions were determined by ¹³C and ¹H NMR spectroscopy. Terpolymer molecular weights and polydispersity indices were obtained via size exclusion chromatography/multi‐angle laser light scattering, and hydrodynamic diameter values were obtained via dynamic light scattering. The solution properties of low‐charge‐density amphoteric copolymers and terpolymers have been studied as a function of solution pH, ionic strength, and polymer concentration. The low‐charge‐density terpolymers display excellent solubility in deionized (DI) water with no phase separation. The charge‐balanced terpolymers exhibit antipolyelectrolyte behavior at pH values ≥(6.5 ± 0.2). As solution pH is decreased, these charge‐balanced terpolymers become increasingly cationic because of the protonation of the anionic repeat units. Charge‐imbalanced terpolymers generally demonstrate polyelectrolyte behavior, although the effects of intramolecular electrostatic interactions (e.g., polyampholyte effects) on the hydrodynamic volume are evident at certain values of solution pH and salt concentration. The aqueous solution behavior (i.e., globule‐to‐coil transition at the isoelectric point in the presence of salt and globule elongation with increasing charge asymmetry) of the terpolymers in the dilute regime correlates well with that predicted by the polyampholyte solution theories of Dobrynin and Rubinstein as well as Kantor and Kardar. Examination of comonomer charge density, hydrogen‐bonding ability, and spacer group (e.g., the moiety separating the ionic group from the polymer chain) indicates that conformational restrictions of the amino acid comonomers result in increased chain stiffness and higher solution viscosities in DI water and brine solutions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4479–4493, 2006     

Synthesis of functional polymers—Vinylidene fluoride based fluorinated copolymers and terpolymers bearing bromoaromatic side‐group

The radical co‐ and terpolymerization of 4‐[(α,β,β‐trifluorovinyl)oxy]bromo benzene (TFVOBB) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF, or VF₂), hexafluoropropene (HFP), perfluoromethyl vinyl ether (PMVE), and chlorotrifluroroethylene (CTFE) is presented. Although TFVOBB could be thermocyclodimerized, it could not homopolymerize under radical initiation. TFVOBB could be copolymerized in solution under a radical initiator with VDF or CTFE comonomers, while its copolymerization with HFP or PMVE were unsuccessful. The terpolymerization of TFVOBB with VDF and HFP, or VDF and PMVE, or VDF and CTFE also led to original fluorinated terpolymers bearing bromoaromatic side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature of the radical initiators, and of the nature of solvents (fluorinated or nonhalogenated). Various monomer concentrations in the co‐ and terpolymers were assessed by ¹⁹F and ¹H‐NMR spectroscopy. The thermal and physico chemical properties were also studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5077–5097, 2004     

Spiropyran Main‐Chain Conjugated Polymers

The first main‐chain conjugated copolymers based on alternating spiropyran (SP) and 9,9‐dioctylfluorene (F8) units synthesized via Suzuki polycondensation (SPC) are presented. The reaction conditions of SPC are optimized to obtain materials of type P(para‐SP‐F8) with appreciably high molecular weights up to M _w ≈ 100 kg mol⁻¹. ¹³C NMR is used to identify the random orientation of the non‐symmetric SP unit in P(p‐SP‐F8). Ultrasound‐induced isomerization of P(p‐SP‐F8) to the corresponding merocyanine form P(p‐MC‐F8) yields a deep‐red solution. This isomerization reaction is followed by ¹H NMR in solution using sonication, whereby the color increasingly changes to deep red. The possibility to incorporate multiple SP units into main‐chain polymers significantly broadens existing SP‐based polymeric architectures.     

Fluorine‐containing linear block terpolymers: Synthesis and self‐assembly in solution

Linear triblock terpolymers of poly(n‐butyl methacrylate)‐b‐poly(methyl methacrylate)‐b‐poly(2‐fluoroethyl methacrylate) (PnBMA‐PMMA‐P2FEMA) were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization. Kinetic studies of the homopolymerization of 2FEMA by RAFT polymerization demonstrated controllable characteristics with fairly narrow polydispersities (～1.30). The resultant PnBMA‐PMMA‐P2FEMA triblock terpolymers were characterized via ¹H NMR, ¹⁹F NMR, and gel permeation chromatography. These polymers formed micellar aggregates in a selective solvent mixture. The as‐formed micelles were analyzed using scanning electron microscopy and dynamic light scattering. It was found that these terpolymers could directly self‐organize into complex micelles in a tetrahydrofuran/methanol mixture with diameters that depended on polymer composition. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Stimuli‐responsive ampholytic terpolymers of N‐acryloyl‐valine,acrylamide, and (3‐acrylamidopropyl)trimethylammonium chloride: Synthesis,characterization, and solution properties

Low‐charge density ampholytic terpolymers composed of acrylamide (AM), (3‐acrylamidopropyl)trimethyl ammonium chloride (APTAC), and N‐acryloyl‐valine were prepared via free‐radical polymerization in 0.5 M NaCl to yield terpolymers with random charge distributions. Sodium formate (NaOOCH) was employed as a chain transfer agent during the polymerization to suppress gel effects and broadening of the molecular weight distribution (MWD). Terpolymer compositions were determined by ¹³C NMR spectroscopy. Terpolymer molecular weights (MWs) and polydispersity indices (PDIs) were obtained via size exclusion chromatography/multi‐angle laser light scattering (SEC‐MALLS). Intrinsic viscosity values determined from SEC‐MALLS data using the Flory–Fox relationship were compared with those determined by low‐shear dilute solution viscometry and found to be in good agreement. SEC‐MALLS experiments allowed examination of radius of gyration‐MW (R_g‐M) relationships and the Mark‐Houwink‐Sakurada intrinsic viscosity‐MW ([η]‐M) relationships for terpolymers. The R_g‐M and [η]‐M relationships indicated little or no excluded volume effects under SEC conditions indicating that the terpolymers were in near theta conditions in an aqueous buffer solution. Potentiometric titration experiments were performed in deionized (DI) water. These studies revealed that the apparent pK_a of the AMVALTAC terpolymers increases with increasing VAL content. The solution properties of low‐charge density ampholytic terpolymers have been studied as functions of solution pH, ionic strength, and polymer concentration. The charge‐balanced terpolymers exhibit polyampholyte behavior at pH values ≥ 6.5. As solution pH is decreased, these charge‐balanced terpolymers become increasingly cationic due to the protonation of the VAL repeat units. Charge‐imbalanced terpolymers generally exhibit polyelectrolyte behavior, although the effects of intramolecular electrostatic interactions (e.g., polyampholyte effects) on the hydrodynamic volume are evident at certain values of solution pH and salt concentration. The solution behavior of the terpolymers in the dilute regime correlates well with that predicted by various polyampholyte solution theories. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3125–3139, 2006     

Preparation and characterization of heteroarm H‐shaped terpolymers by combination of reversible addition‐fragmentation transfer polymerization and ring‐opening polymerization

Heteroarm H‐shaped terpolymers, [(poly(L ‐lactide))(polystyrene)]poly(ethylene oxide)[(polystyrene)(poly(L ‐lactide))], [(PLLA)(PS)]PEO[(PS)(PLLA)], in which PEO acts as a main chain and PS and PLLA as side arms, have been successfully prepared via combination of reversible addition–fragmentation transfer (RAFT) polymerization and ring‐opening polymerization (ROP). The first step is the synthesis of the PEO capped with one terminal dithiobenzoate group and one hydroxyl group at every chain end, [(HOCH₂)(PhC(S)S)]PEO[(S(S)CPh)(CH₂OH)] from the reaction of carboxylic acid with ethylene oxide. Then, the RAFT polymerization of styrene (St) was carried out using [(HOCH₂)(PhC(S)S)]PEO[(S(S)CPh)(CH₂OH)] as RAFT agent and AIBN as initiator, and the triblock copolymer, [(HOCH₂)(PS)]PEO[(PS)(CH₂OH)], was formed. Finally, the heteroarm H‐shaped terpolymers, [(PLLA)(PS)]PEO[(PS)(PLLA)], were produced by ROP of LLA, using triblock copolymer, [(HOCH₂)(PS)]PEO[(PS)(CH₂OH)], as macroinitiator and Sn(Oct)₂ as catalyst. The target products and intermediates were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 789–799, 2007     

Poly[2,7‐(9,9‐dihexylfluorene)‐alt‐pyridine] with donor‐acceptor architectures: A new series of blue‐light‐emitting alternating copolymers

A novel series of well‐defined alternating poly[2,7‐(9,9‐dihexylfluorenyl)‐alt‐pyridinyl] (PDHFP) with donor‐acceptor repeat units were synthesized using palladium (0)‐catalyzed Suzuki cross‐coupling reactions in good to high yields. In this series of alternating polymers, 2, 7‐(9,9‐dihexylfluorenyl) was used as the light emitting unit, and the electron deficient pyridinyl unit was employed to provide improved electron transportation. These polymers were characterized by ¹H‐NMR and ¹³C‐NMR, gel permeation chromatography (GPC), thermal analyses, and UV‐vis and fluorescence spectroscopy. The glass transition temperature of copolymers in nitrogen ranged from 110 to 148 °C, and the copolymers showed high thermal stabilities with high decomposition temperatures in the range of 350 to 390 °C in air. The difference in linkage position of pyridinyl unit in the polymer backbone has significant effects on the electronic and optical properties of polymers in solution and in film phases. Meta‐linkage (3,5‐ and 2,6‐linkage) of pyridinyl units in the polymer backbone is more favorable to polymer for pure blue emission and prevention of aggregation of polymer chain than para‐linkage (2,5‐linkage) of the pyridinyl units. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4792–4801, 2004     

Terpolymerization of propylene oxide,carbon dioxide,and trimethylene carbonate

High-molecular-weight polymers with different contents of propylene carbonate (PC), and trimethylene carbonate (TMC) units in the polymer chain were synthesized by the coordination anionic copolymerization of carbon dioxide, propylene oxide (PO), and TMC in supercritical carbon dioxide (scCO₂). Zinc adipate (ZnAd) was used as a catalyst. The terpolymerization products were characterized by ¹H and ¹³C NMR, IR spectroscopy, GPC, and DSC. The effect of the reaction conditions on the yield, composition, structure, and molecular weight and thermal characteristics of the terpolymers was studied. The phase behavior of the synthesized polymers and mixtures of polypropylene carbonate with polytrimethylene carbonate was examined.

     

Synthesis,characterization, and electroluminescence of novel copolyfluorenes and their applications in white light emission

New copolyfluorenes (PC8OF0–PC8OF50) comprised of 9,9‐dioctylfluorene and jacketed units 2,5‐bis[(5‐octyloxy‐phenyl)‐1,3,4‐ oxadiazole]‐1‐(3,5‐dibromophenyl)‐benzene (35C8) were synthesized by palladium‐catalyzed Suzuki coupling reaction. They were characterized by molecular weight determination, ¹H NMR, elemental analysis, DSC, TGA, absorption and emission spectroscopy, and cyclic voltammetry (CV). These copolymers were readily soluble in common organic solvents and exhibited high glass transition temperature and thermal stability.The copolymer films showed absorption peaks from 381 nm to 351 nm, and PL peaks from 432 nm to 421 nm with a blue shift originated from 35C8 units. Both the HOMO energy levels and LUMO levels changed little as the content of 35C8 units increased (?5.59 eV to ?5.48 eV and ?2.60 eV to ?2.49 eV). Electroluminescent devices: ITO/PEDOT:PSS[poly(ethylenedioxythiophene):polystyrenesulfonate]/polymer/Ca (25 nm)/Ag(80 nm) (a), ITO/PEDOT:PSS/polymer/TPBI [1,3,5‐ tris(N‐phenylbenzimidazol‐2‐yl)benzene](15 nm)/Mg:Ag(10:1, wt)/Ag (b), and ITO/ PEDOT:PSS/PVK[Poly(N‐vinylcarbazole)]/polymer/TPBI(15 nm)/Ca(25 nm)/Ag(80 nm) (c) were fabricated to investigate the influence of jacketed contents and device architectures on emission characteristics. The maximum brightness and current efficiency of the PC8OF25 device (5097.8 cd/m² and 0.484 cd/A) surpassed those of the PC8OF0 device (3122.8 cd/m² and 0.416 cd/A). The EL emissions of PC8OF0 – PC8OF50 were pure blue and low‐energy excimer emission bands were successfully suppressed, indicating that these copolymers could be good candidates for blue light‐emitting materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4555–4565, 2009     

Correlations between microstructure and crystallization of the fluorinated terpolymer of tetrafluoroethylene,hexafluoropropylene, and vinylidene fluoride

Random THV terpolymers consisting of tetrafluoroethylene (TFE), hexafluoropropylene (HFP), and vinylidene fluoride (VDF) are viable alternatives to polytetrafluoroethylene (PTFE) combining excellent chemical stability and thermoplastic processability. Although the properties of THV may be modified by crystallization, little is known on how crystallization is influenced by the chain microstructure of THV. We analyzed the chain microstructure of THV‐221G by solid‐state ¹⁹F NMR spectroscopy under fast magic angle spinning, revealing that THV‐221G contains 43.8 mol % TFE, 46.0 mol % VDF, and 10.2 mol % HFP. Sequence analysis revealed that the TFE units are preferentially located next to other TFE units. The HFP units, which are obstacles to crystallization because of their bulky CF₃ side groups, are preferentially located next to VDF units. WAXS measurements correspondingly revealed the presence of THV‐221G crystals with PTFE‐like packing and of further THV‐221G crystal populations with widened d‐spacings caused by the incorporation of certain amounts of HFP units into the THV‐221G crystals. Under confinement imposed by the cylindrical nanopores of self‐ordered alumina, the THV‐221G melting point decreased with decreasing pore diameter. Although direct impingement of the growing THV‐221G crystals on the pore walls is unlikely, the geometric confinement limits the access of growing THV‐221G crystals to crystallizable THV‐221G chain segments. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1402–1408     

Synthesis,structures, and thermal properties of terpolymers of propylene oxide,carbon dioxide,and cyclohexene oxide

High molecular weight block terpolymers with different contents of polypropylene carbonate and cyclohexene carbonate units in the polymer chain were synthesized by the copolymerization of carbon dioxide, propylene oxide, and cyclohexene oxide. Zinc adipate was used as a catalyst. The terpolymerization products were characterized by ¹H and ¹³C NMR spectroscopy, IR spectroscopy, GPC, DSC, and DMA methods. The influence of the reaction conditions on the composition, microstructure, and molecular-weight and thermal characteristics was studied.

     

Synthesis,photophysics, and electroluminescent performance of stable blue‐light‐emitting copoly(9,9‐diarylfluorene)s

A series of fluorene derivatives containing nonsymmetric and bulky aromatic groups at C‐9 position were synthesized and used for the preparation of blue‐light‐emitting copolyfluorenes ( P1 – P4 ) by the Suzuki coupling polycondensation. The copolymers were characterized by molecular weight determination, elemental analysis, differential scanning calorimeter, thermogravimetric analysis, absorption and emission spectroscopy, cyclic voltammetry, and differential pulse voltammetry. Their decomposition temperatures and glass transition temperatures are 423–441 °C and >120 °C, respectively. In film state, the copolyfluorenes exhibit blue photoluminescence at 425–450 nm, which remains almost unchanged after annealing at 200 °C in air for 60 min. Polymer light‐emitting diodes [ITO/PEDOT:PSS/ P1 – P4 /Ca(50 nm)/Al(100 nm)] show stable blue‐light emission under device operation with the CIE co‐ordinates being between (0.16, 0.07) and (0.17, 0.09). The light‐emitting diodes devices from P1 and P3 containing electron‐deficient oxadiazole units display enhanced performance, with the maximum brightness and maximum current efficiency being (4510 cd/m² and 2.40 cd/A) and (2930 cd/m², 1.19 cd/A), respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2821–2834, 2009     

Poly(acrylonitrile‐co‐methyl methacrylate‐co‐methyl acrylate): Synthesis and stereosequence distribution analysis by 2D NMR

Terpolymers of acrylonitrile (A), methyl methacrylate (B), and methyl acrylate (M) were synthesized under optimized atom transfer radical polymerization conditions using 2‐bromopropionitrile as an initiator and CuBr/dinonyl bipyridine as a catalyst. Variation of the feed composition led to terpolymers with different compositions. Composition of synthesized terpolymers were calculated from quantitative ¹³C{¹H} NMR spectra. Number average molecular weight and polydispersity index were determined by gel permeation chromatography. The overlapping and broad signals of the terpolymers were assigned completely to various compositional and configurational sequences by correlation of one‐dimensional ¹H, ¹³C{¹H}, and distortionless enhancement by polarization transfer and two‐dimensional heteronuclear single quantum coherence (HSQC) and total correlation spectroscopy (TOCSY). 2D HSQC NMR study shows one to one correlation between carbon and proton signals, while 2D TOCSY spectra were used to confirm 1, 2 bond geminal couplings between nonequivalent protons of same methylene group. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 25–37, 2009     

Visible-Light-Triggered Photoswitching of Diphosphene Complexes

Although diphosphene transition metal complexes are known to undergo E to Z isomerization upon irradiation with UV light, their potential for photoswitching has remained poorly explored. In this study, we present diphosphene complexes capable of reversible photoisomerizations through haptotropic rearrangements. The compounds [( 2 -κ²P,κ⁶C)Mo(CO)₂][OTf] ( 3 a [OTf]), [( 2 -κ²P,κ⁶C)Fe(CO)][OTf] ( 3 b [OTf]), and [( 2 -κ²P)Fe(CO)₄][OTf] ( 4 [OTf]) were prepared using the triflate salt [(L_C)P=P(Dipp)][OTf] ( 2 [OTf) as a precursor (L_C=4,5-dichloro-1,3-bis(2,6-diisiopropylphenyl)-imidazolin-2-yl; Dipp=2,6-diisiopropylphenyl, OTf=triflate). Upon exposure to blue or UV light (λ=400 nm, 470 nm), the initially red-colored η²-diphosphene complexes 3 a , b [OTf] readily undergo isomerization to form blue-colored η¹-complexes [( 2 -κ¹P,κ⁶C)M(CO)_n][OTf] ( 5 a , b [OTf]; a : M=Mo, n=2; b : M=Fe, n=1). This haptotropic rearrangement is reversible, and the (κ²P,κ⁶C)-coordination mode gradually reverts back upon dissolution in coordinating solvents or more rapidly upon exposure to yellow or red irradiation (λ=590 nm, 630 nm). The electronic reasons for the reversible visible-light-induced photoswitching observed for 3 a , b [OTf] are elucidated by DFT calculations. These calculations indicate that the photochromic isomerization originates from the S₁ excited state and proceeds through a conical intersection.     

N‐Isopropylacrylamide/monoalkyl itaconate copolymers and N‐isopropylacrylamide/itaconic acid/dimethyl itaconate terpolymers

Temperature‐ and pH‐sensitive copolymers and terpolymers of N‐isopropylacrylamide (NIPAAm) with itaconic acid (IA), monomethyl itaconate (MMeI), monobutyl itaconate (MBuI), monooctyl itaconate (MOcI), monocetyl itaconate (MCeI), and dimethyl itaconate (DMI) were prepared by free radical solution polymerization method. The dependence of coil‐to‐globule transition on pH and composition, molecular structures, and reactivities of monoalkyl itaconates, molecular weight distributions, and glass transition temperatures of copolymers and terpolymers were investigated using FT‐IR and UV–visible spectroscopic techniques, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and acid–base titration methods. The temperature‐/pH‐dependent coil‐to‐globule transition measurements showed that, upon increasing the content and length of alkyl chains, the lower critical solution temperatures (LCSTs) were shifted to higher temperatures. This meant that with increase in the length of hydrophobic alkyl chain in the monoitaconates intramolecular intreactions between the carboxyl groups were suppressed and LCSTs increased. The aqueous solution behaviors of NIPAAm/IA/DMI terpolymers also revealed that, even if the terpolymer hydrophobicity is increased by adding DMI units, the presence of IA units overcame the decrease in hydrophilicity of the terpolymers. The presence of DMI units in the terpolymers balanced the hydrophilic character of IA. DSC results supported the ones obtained from the pH‐dependent coil‐to‐globule transition measurements. An increase in both the chain length of alkyl groups attached to the monoitaconates and the contents of the mono‐ and dialkyl itaconates in the copolymers and terpolymers decreased the T_gs. In the case of NIPAAm/IA and NIPAAm/MMeI copolymers, the presence of the carboxyl groups forming hydrogen bonds increased the T_g, while the monoalkyl and dialkyl itaconates such as MBuI, MOcI, MCeI and DMI lead to a decrease in T_g of copolymers and terpolymers because of the suppression of intramolecular interactions (resulting from the ? COOH and ? COO^? groups) through the longer alkyl spacers. The dependence of the thermosensitivity of these NIPAAm copolymers and terpolymers on different conditions of pH, and the nature and content of comonomers suggests that they can be useful in biotechnology and drug delivery applications which involve small changes in pH and temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

13Carbon nuclear magnetic resonance of ethylene–propylene–1‐decene terpolymers

Many studies have been reported on the ¹³C NMR characterization of ethylene–α‐olefin copolymers, but only a few have been reported on terpolymers. The incorporation of an α‐olefin into the polyethylene chain changes the structure and, consequently, the properties of the polymer obtained. Looking for new products, we obtained a series of ethylene–propylene–1‐decene terpolymers with the metallocenic system rac‐ethylene bisindenyl zirconium dichloride/methylaluminoxane. We performed a complete ¹³C NMR characterization of these terpolymers qualitatively and quantitatively. Here we present a detailed study of the ¹³C NMR chemical shifts, triad sequence distributions, monomer average sequence lengths, and reactivity ratios for these terpolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2531–2541, 2003     

Preparation and characterization of soluble terpolymers from m‐phenylenediamine,o‐anisidine,and 2,3‐xylidine

A series of terpolymers were synthesized by the chemical oxidative polymerization of m‐phenylenediamine (MPD), o‐anisidine (AS), and 2,3‐xylidine (XY) in hydrochloride aqueous medium. The yield, intrinsic viscosity, and solubility of the terpolymers were studied by changing the MPD/AS/XY molar ratio from 100/0/0 to 53/39/8 to 0/100/0. It was discovered that the MPD/AS/XY terpolymers exhibit a higher polymerization yield and better solubility than MPD/AS and MPD/XY bipolymers having the same MPD molar content. The as‐prepared MPD/AS/XY terpolymer bases were characterized by Fourier transform infrared, ultraviolet–visible, ¹H NMR, and high‐resolution solid‐state ¹³C NMR spectroscopies; wide‐angle X‐ray diffraction; and thermogravimetry. The results suggested that the oxidative polymerization from MPD, AS, and XY is exothermic, and the resulting terpolymers are more easily soluble in some organic solvents than MPD homopolymer. The copolymer obtained was a real terpolymer containing MPD, AS, and XY units, and the actual MPD/AS/XY molar ratio calculated by solid‐state ¹³C NMR spectra of the polymers is very close to the feed ratio, although the AS content calculated on the basis of the ¹H NMR spectrum of the soluble part of the polymer is higher than the feed AS content. The terpolymers and MPD homopolymer exhibit a higher polymerization yield and much higher intrinsic viscosity and are more amorphous than the AS homopolymer. At a fixed MPD content of 70 mol %, the terpolymers exhibit an increased thermostability and activation energy of the major degradation in nitrogen and air with an increasing AS content. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3989–4000, 2001     

Biodegradable poly(trimethylene carbonate‐b‐(L‐lactide‐ran‐glycolide)) terpolymers with tailored molecular structure and advanced performance

The macroinitiator of poly(1,3‐trimethylene carbonate) (PTMC) with number‐average molecular weight ( ) of 9.6 × 10³ g mol⁻¹ was synthesized by ring‐opening polymerization at 120°C. Then, the novel terpolymer P(TMC‐b‐(LLA‐ran‐GA)) consisting of PTMC homopolymer segment attached with various monomer molar ratios of L‐lactide (LLA) and glycolide (GA) random copolymerization block was prepared with about 5.0 × 10⁴ g mol⁻¹ by ring‐opening polymerization in bulk at 140°C. The tailored molecular structures of P(TMC‐b‐(LLA‐ran‐GA)) were characterized by ¹H nuclear magnetic resonance, ¹³C NMR, FTIR, and gel permeation chromatography, and chain microstructure analysis was performed in detail with ¹³C NMR spectroscopy. The effect of GA units on the thermal and crystallization behaviors, mechanical properties, as well as biodegradability of terpolymers was investigated by differential scanning calorimetry, wide‐angle X‐ray diffraction, stress‐strain measurements, and in vitro tests in comparison with corresponding poly(trimethylene carbonate‐block‐L‐lactide) copolymer P(TMC‐b‐LLA). The results show that amorphous PTMC segments have a significant effect on condensed state behavior of the terpolymers, and the incorporation of GA units strongly decreases the crystallinity and crystallization ability of LLA segment within terpolymers because of more random LLA‐GA sequence and shorter average LLA block length. Meanwhile, the toughness of materials is greatly improved, and in vitro degradation is also accelerated. Peripheral vascular stents were 3D printed for the first time and met the requirements for application. The results show totally biodegradable terpolymers with unique molecular structure, and modifiable properties are promising new biomaterials with advanced performance for biomedical application.     

Evidence for Two‐Photon Absorption‐Induced ESIPT of Chromophores Containing Hydroxyl and Imino Groups

This paper presents experimental and theoretical investigations into excited‐state intramolecular proton transfer (ESIPT) in new chromophores with hydroxyl and imino groups under one‐ and two‐photon excitation. The results show that internal hydrogen bonding exhibits a remarkable influence on the maximum absorption wavelength of 2‐[(4′‐N,N‐diethylaminodiphenylethylene‐4‐ylimino)methyl]phenol ( C1 ) and 2‐[(4′‐methoxyl‐diphenylethylene‐4‐ylimino)methyl]phenol ( C3 ). Compounds C1 and C3 exhibit well‐separated dual fluorescence emission bands under one‐ and two‐photon excitation. The second fluorescence peaks of C1 and C3 are characterized by much larger Stokes shift than the first normal peaks (ca. 140 vs. 30 nm). 4‐[(4′‐N,N‐Diethylaminodiphenylethylene‐4‐ylimino)methyl]phenol ( C2 ) and 4‐[(4′‐methoxyldiphenylethylene‐4‐ylimino)methyl]phenol ( C4 ) display single emission bands with small Stokes shifts (ca. 30 nm) in various solvents under one‐ and two‐photon excitation. Furthermore, the first emission maxima of C1 and C3 are almost identical to the maximum fluorescence emission wavelengths of C2 and C4 , respectively. These results show that C1 and C3 can undergo ESIPT via a reasonable six‐membered ring, while there is no ESIPT in C2 and C4 under one‐ and two‐photon excitation. Compounds C1 and C2 have larger two‐photon absorption cross‐sections under various near‐infrared laser frequencies tuned from 700 to 880 nm. Molecular geometry optimization of the phototautomers (enol and keto) was performed to analyze the experimental results. The possibility of using these chromophores for metal ions as chemosensors of was thoroughly investigated. In DMF C3 exhibits excellent sensing responses to Zn²⁺ and Fe³⁺ ions through a greatly increased greatly and a largely reduced emission, respectively. In methanol disappearance of ESIPT emission with added Zn²⁺ ions confirms its existence. The binding constants of C3 with Zn²⁺ and Fe³⁺ ions in DMF are also estimated.     

Addition of alkynes to a gallium bis-amido complex: imitation of transition-metal-based catalytic systems

Acetylene, phenylacetylene, and alkylbutynoates add reversibly to (dpp‐bian)Ga–Ga(dpp‐bian) (dpp‐bian=1,2‐bis[(2,6‐diisopropylphenyl)‐imino]acenaphthene) to give addition products [dpp‐bian(R¹C?CR²)]Ga–Ga[(R²C?CR¹)dpp‐bian]. The alkyne adds across the Ga? N? C section, which results in new carbon–carbon and carbon–gallium bonds. The adducts were characterized by electron absorption, IR, and ¹H NMR spectroscopy and their molecular structures have been determined by single‐crystal X‐ray analysis. According to the X‐ray data, a change in the coordination number of gallium from three [in (dpp‐bian)Ga–Ga(dpp‐bian)] to four (in the adducts) results in elongation of the metal–metal bond by approximately 0.13 Å. The adducts undergo a facile alkynes elimination at elevated temperatures. The equilibrium between [dpp‐bian(PhC?CH)]Ga–Ga[(HC?CPh)dpp‐bian] and [(dpp‐bian)Ga–Ga(dpp‐bian) + 2 PhC?CH] in toluene solution was studied by ¹H NMR spectroscopy. The equilibrium constants at various temperatures (298≤T≤323 K) were determined, from which the thermodynamic parameters for the phenylacetylene elimination were calculated (ΔG°=2.4 kJ mol^?1, ΔH°=46.0 kJ mol^?1, ΔS°=146.0 J K^?1mol^?1). The reactivity of (dpp‐bian)Ga–Ga(dpp‐bian) towards alkynes permits use as a catalyst for carbon–nitrogen and carbon–carbon bond‐forming reactions. The bisgallium complex was found to be a highly effective catalyst for the hydroamination of phenylacetylene with anilines. For instance, with [(dpp‐bian)Ga–Ga(dpp‐bian)] (2 mol %) in benzene more than 99 % conversion of PhNH₂ and PhC?CH into PhN?C(Ph)CH₃ was achieved in 16 h at 90 °C. Under similar conditions, the reaction of 1‐aminoanthracene with PhC?CH catalyzed by (dpp‐bian)Ga–Ga(dpp‐bian) formed a carbon–carbon bond to afford 1‐amino‐2‐(1‐phenylvinyl)anthracene in 99 % yield.