A New Type of Donor–Acceptor Cyclopropane Reactivity: The Generation of Formal 1,2‐ and 1,4‐Dipoles

A new type of donor–acceptor cyclopropane reactivity has been discovered. On treatment with anhydrous GaCl₃, they react as sources of even‐numbered 1,2‐ and 1,4‐dipoles instead of the classical odd‐numbered 1,3‐dipoles due to migration of positive charge from the benzyl center. This type of reactivity has been demonstrated for new reactions, namely, cyclodimerizations of donor–acceptor cyclopropanes that occur as [2+2]‐, [3+2]‐, [4+2]‐, [5+2]‐, [4+3]‐, and [5+4]‐annulations. The [4+2]‐annulation of 2‐arylcyclopropane‐1,1‐dicarboxylates to give polysubstituted 2‐aryltetralins has been developed in a preparative version that provides exceedingly high regio‐ and diastereoselectivity and high yields. The strategy for selective hetero‐combination of donor–acceptor cyclopropanes was also been developed. The mechanisms of the discovered reactions involving the formation of a comparatively stable 1,2‐ylide intermediate have been studied.     

Dimerization of Dimethyl 2‐(Naphthalen‐1‐yl)cyclopropane‐1,1‐dicarboxylate in the Presence of GaCl3 to [3+2], [3+3], [3+4], and Spiroannulation Products

In the presence of a catalytic amount of GaCl₃, dimethyl 2‐(naphthalen‐1‐yl)cyclopropane‐1,1‐dicarboxylate 5 undergoes selective [3+2]‐annulation‐type dimerization to give a polysubstituted cyclopentane containing two naphthalenyl substituents in the vicinal position (Scheme 2). Treatment of the same cyclopropane with an equimolar amount of GaCl₃?THF results in dimerization with electrophilic attack on each of the benzene rings to give [3+3] and [3+4] annulation products. The latter represent a new type of dimerization of donor? acceptor cyclopropanes. Finally, under conditions of double catalysis with GaCl₃, 3,3,5,5‐tetrasubstituted 4,5‐dihydropyrazole, this cyclopropane‐dicarboxylate undergoes stereospecific dimerization as a result of electrophilic ipso‐attack to give a tetracyclic pentaleno[6a,1‐a]naphthalene derivative (Scheme 5). Possible reaction mechanisms are proposed.     

A Straightforward Approach to Tetrahydroindolo[3,2‐b]carbazoles and 1‐Indolyltetrahydrocarbazoles through [3+3] Cyclodimerization of Indole‐Derived Cyclopropanes

A rapid new approach to produce biologically relevant bisindoles, namely indolyltetrahydrocarbazoles and indolo[3,2‐b]carbazoles, has been developed, based on the Ga(OTf)₃‐catalyzed [3+3] cyclodimerization of indole‐derived donor–acceptor cyclopropanes. Chemoselectivity of the process depends on the location of the three‐membered ring at the indole core.     

Ring-Opening 1-Amino-3-aminomethylation of Donor–Acceptor Cyclopropanes via 1,3-Diazepanes

The first ring-opening reaction of donor–acceptor cyclopropanes to give diamines is reported. For this reaction, a 1,3-bisfunctionalization was developed using cyclopropanes, triazinanes, and Sc(OTf)₃ as the catalyst, followed by treatment with acid. The reaction proceeds under very mild conditions and tolerates many functional groups. Moreover, a library of various 1,3-diazepanes, which arise as intermediates of the first formal aza-[4+3]-cycloaddition reaction with donor–acceptor cyclopropanes, was synthesized.     

Observation of Main‐Group Tricarbonyls [B(CO)3] and [C(CO)3]+ Featuring a Tilted One‐Electron Donor Carbonyl Ligand

A combined experimental and theoretical study on the main‐group tricarbonyls [B(CO)₃] in solid noble‐gas matrices and [C(CO)₃]⁺ in the gas phase is presented. The molecules are identified by comparing the experimental and theoretical IR spectra and the vibrational shifts of nuclear isotopes. Quantum chemical ab initio studies suggest that the two isoelectronic species possess a tilted η¹(μ₁‐CO)‐bonded carbonyl ligand, which serves as an unprecedented one‐electron donor ligand. Thus, the central atoms in both complexes still retain an 8‐electron configuration. A thorough analysis of the bonding situation gives quantitative information about the donor and acceptor properties of the different carbonyl ligands. The linearly bonded CO ligands are classical two‐electron donors that display classical σ‐donation and π‐back‐donation following the Dewar–Chatt–Duncanson model. The tilted CO ligand is a formal one‐electron donor that is bonded by σ‐donation and π‐back‐donation that involves the singly occupied orbital of the radical fragments [B(CO)₂] and [C(CO)₂]⁺.     

Stereospecific Formal [3+2] Dipolar Cycloaddition of Cyclopropanes with Nitrosoarenes: An Approach to Isoxazolidines

The MgBr₂‐catalyzed formal [3+2] cycloaddition of donor–acceptor activated cyclopropanes with nitrosoarenes offers a novel approach to various structurally diverse isoxazolidines. The reactions, which are experimentally easy to conduct, occur with complete stereospecificity and perfect control of regioselectivity. Product isoxazolidines can be readily transformed into α‐amino lactones by reductive or decarboxylative N? O cleavage and subsequent lactonisation, and the N‐aryl bond cleavage is also possible under oxidative conditions.     

Utilization of Donor–Acceptor Interactions for the Catalytic Acceleration of Nucleophilic Additions to Aromatic Carbonyl Compounds

A conceptually new method for the catalytic electrophilic activation of aromatic carbonyl substrates, by utilizing donor–acceptor interactions between an electron‐deficient macrocyclic boronic ester host ( [2+2] _BTH‐F ) and an aromatic carbonyl guest substrate, was realized. In the presence of a catalytic amount of [2+2] _BTH‐F , dramatic acceleration of the nucleophilic addition of a ketene silyl acetal towards either electron‐rich aromatic aldehydes or ketones was achieved. Several control experiments confirmed that inclusion of the aromatic substrates within [2+2] _BTH‐F , through efficient donor–acceptor interactions, is essential for the acceleration of the reaction.     

GaCl3‐Mediated Reactions of Donor–Acceptor Cyclopropanes with Aromatic Aldehydes

A new strategy for cascade assembly of substituted indenes and polycyclic lactones based on reactions of donor–acceptor cyclopropanes and styrylmalonates with aromatic aldehydes in the presence of GaCl₃ has been developed. The use of GaCl₃ makes it possible to principally change the direction of the reaction known in this series of substrates and to perform the process in a multicomponent version. Generation of formal 1,2‐zwitterionic intermediates owing to complexation of dicarboxylate groups with GaCl₃ is the driving force of the reactions discovered. This method makes it possible to assemble indenylmalonates or indano[1′,2′:2,3]indano[2,1‐b]furan‐2‐ones in one synthetic stage from readily available starting compounds with high regio‐ and diastereoselectivity. A mechanism of the reactions has been suggested using the ¹⁸O label in benzaldehyde.     

Dirhodium(II)‐Catalyzed Annulation of Enoldiazoacetamides with α‐Diazoketones: An Efficient and Highly Selective Approach to Fused and Bridged Ring Systems

A dirhodium(II)‐catalyzed annulation reaction between two structurally different diazocarbonyl compounds furnishes the donor–acceptor cyclopropane‐fused benzoxa[3.2.1]octane scaffold with excellent chemo‐, regio‐, and diastereoselectivity under exceptionally mild conditions. The composite transformation occurs by [3+2]‐cycloaddition between donor–acceptor cyclopropenes generated from enoldiazoacetamides and carbonyl ylides formed from intramolecular carbene–carbonyl cyclization in one pot with one catalyst. The annulation products can be readily transformed into benzoxa[3.3.1]nonane and hexahydronaphthofuran derivatives with exact stereocontrol. This method allows the efficient construction of three fused and bridged ring systems, all of which are important skeletons of numerous biologically active natural products.     

Asymmetric Total Synthesis of (−)‐Englerin A through Catalytic Diastereo‐ and Enantioselective Carbonyl Ylide Cycloaddition

An asymmetric total synthesis of the guaiane sesquiterpene (?)‐englerin A, a potent and selective inhibitor of the growth of renal cancer cell lines, was accomplished. The basis of the approach is a highly diastereo‐ and enantioselective carbonyl ylide cycloaddition with an ethyl vinyl ether dipolarophile under catalysis by dirhodium(II) tetrakis[N‐tetrachlorophthaloyl‐(S)‐tert‐leucinate], [Rh₂(S‐TCPTTL)₄], to construct the oxabicyclo[3.2.1]octane framework with concomitant introduction of the oxygen substituent at C9 on the exo‐face. Another notable feature of the synthesis is ruthenium tetraoxide‐catalyzed chemoselective oxidative conversion of C9 ethyl ether to C9 acetate.     

A Bis(silylenyl)pyridine Zero‐Valent Germanium Complex and Its Remarkable Reactivity

The synthesis, reactivity, and electronic structure of the unique germylone iron carbonyl complex [SiNSi]Ge⁰ →Fe(CO)₄ is reported. The compound was obtained in 49 % yield from the reaction of the bis(N‐heterocyclic silylenyl)pyridine pincer ligand SiNSi (1,6‐C₅NH₃‐[EtNSi(N^tBu)₂CPh]₂) with GeCl₂?(dioxane) to give the corresponding chlorogermyliumylidene chloride precursor [SiNSi]Ge^IICl⁺ Cl^? , which was further reduced with K₂Fe(CO)₄. Single‐crystal X‐ray diffraction analysis of [SiNSi]Ge →Fe(CO)₄ revealed that the Ge⁰ center adopts a trigonal‐pyramidal geometry with a Si‐Ge‐Si angle of 95.66(2)°. Remarkably, one of the Si^II donor atoms in the complex is five‐coordinated because of additional (pyridine)N→Si coordination. Unexpectedly, the reaction of [SiNSi]Ge →Fe(CO)₄ with GeCl₂?(dioxane) (one molar equivalent) yielded the first push–pull germylone–germylene donor–acceptor complex, [SiNSi]Ge →GeCl₂→Fe(CO)₄ through the insertion of GeCl₂ into the dative Ge⁰→Fe bond. The electronic features of the new compounds were investigated by DFT calculations.     

New alternating D–A1–D–A2 copolymer containing two electron‐deficient moieties based on benzothiadiazole and 9‐(2‐Octyldodecyl)‐8H‐pyrrolo[3,4‐b]bisthieno[2,3‐f:3',2'‐h]quinoxaline‐8,10(9H)‐dione for efficient polymer solar cells

A novel D–A₁–D–A₂ copolymer denoted as P1 containing two electron withdrawing units based on benzothiadiazole (BT) and 9‐(2‐octyldodecyl)?8H‐pyrrolo[3,4‐b] bisthieno[2,3‐f:3′,2′‐h]quinoxaline‐8,10(9H)–dione (PTQD) units was synthesized and characterized. The resulting copolymer exhibits a broad‐absorption spectrum, relatively deep lying HOMO energy level (?5.44 eV) and narrow optical bandgap (1.50 eV). Bulk heterojunction (BHJ) polymer solar cells (PSCs) based on P1 as donor and PC₇₁BM as acceptor with optimized donor to acceptor weight ratio of 1:2 and processed with DIO/CB solvent showed good photovoltaic performance with power conversion efficiency of 6.21% which is higher than that of the device processed without solvent additive (4.40%). The absorption and morphology investigations of the active layers indicated that structural and morphological changes were induced by the solvent additive. This higher power conversion efficiency could be mainly attributed to the absorption enhancement and improved charge transported in the active layer induced by the better nanoscale morphology of the active layer. This study demonstrated that a copolymer with two different acceptor moieties in the backbone may be promising candidate as donor copolymer for solution processed BHJ PSCs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 155–168     

6‐(Diazomethyl)‐1,3‐bis(methoxymethyl)uracil,Synthesis and Transformation into Annulated Pyrimidinediones

6‐(Diazomethyl)‐1,3‐bis(methoxymethyl)uracil ( 5 ) was prepared from the known aldehyde 3 by hydrazone formation and oxidation. Thermolysis of 5 and deprotection gave the pyrazolo[4,3‐d]pyrimidine‐5,7‐diones 7a and 7b . Rh₂(OAc)₄ catalyzed the transformation of 5 into to a 2 : 1 (Z)/(E) mixture of 1,2‐diuracilylethenes 9 (67%). Heating (Z)‐ 9 in 12n HCl at 95° led to electrocyclisation, oxidation, and deprotection to afford 73% of the pyrimido[5,4‐f]quinazolinetetraone 12 . The Rh₂(OAc)₄‐catalyzed reaction of 5 with 3,4‐dihydro‐2H‐pyran and 2,3‐dihydrofuran gave endo/exo‐mixtures of the 2‐oxabicyclo[4.1.0]heptane 13 (78%) and the 2‐oxabicyclo[3.1.0]hexane 15 (86%), Their treatment with AlCl₃ or Me₂AlCl promoted a vinylcyclopropane–cyclopentene rearrangement, leading to the pyrano‐ and furanocyclopenta[1,2‐d]pyrimidinediones 14 (88%) and 16 (51%), respectively. Similarly, the addition product of 5 to 2‐methoxypropene was transformed into the 5‐methylcyclopenta‐pyrimidinedione 18 (55%). The Rh₂(OAc)₄‐catalyzed reaction of 5 with thiophene gave the exo‐configured 2‐thiabicyclo[3.1.0]hexane 19 (69%). The analoguous reaction with furan led to 8‐oxabicyclo[3.2.1]oct‐2‐ene 20 (73%), and the reaction with (E)‐2‐styrylfuran yielded a diastereoisomeric mixture of hepta‐1,4,6‐trien‐3‐ones 21 (75%) that was transformed into the (1E,4E,6E)‐configured hepta‐1,4,6‐trien‐3‐one 21 (60%) at ambient temperature.     

Divergent Reactivity of Thioalkynes in Lewis Acid Catalyzed Annulations with Donor–Acceptor Cyclopropanes

Efficient methods for the convergent synthesis of (poly)cyclic scaffolds are urgently needed in synthetic and medicinal chemistry. Herein, we describe new annulation reactions of thioalkynes with phthalimide‐substituted donor–acceptor cyclopropanes, which gave access to highly substituted cyclopentenes and polycyclic ring systems. With silyl‐thioalkynes, the Lewis acid catalyzed [3+2] annulation reaction with donor–acceptor cyclopropanes took place to afford 1‐thio‐cyclopenten‐3‐amines. On the other hand, an unprecedented polycyclic compound was formed with alkyl‐thioalkynes through a reaction pathway directly involving the phthalimide group. The two transformations proceeded in good yields and tolerated a large variety of functional groups.     

Hydrogen‐bonded layered structures in two bis(tert‐butyldimethylsilyloxy)‐substituted cyclic diol derivatives

2,6‐Bis(tert‐butyldimethylsilyloxy)‐9‐oxabicyclo[3.3.1]nonane‐3,7‐diol, C₂₀H₄₂O₅Si₂, (I), and 4,8‐bis(tert‐butyldimethylsilyloxy)‐2,6‐dioxatricyclo[3.3.1^3,7]decane‐1,3‐diol, C₂₀H₄₀O₆Si₂, (II), form layered structures that differ in the way the molecules are connected within each layer. The endocyclic O atom common to both structures plays an active role in the hydrogen‐bonding network, whereas the second oxygen bridge in (II) does not participate in any interaction. This work reports the first structural analysis of two bis(tert‐butyldimethylsilyloxy)‐substituted cyclic diol derivatives and provides insight into the influence of small changes in the molecular structure on the supramolecular aggregation. The unbalanced hydrogen‐bond acceptor/donor ratio, greater in (II) than in (I), does not result in the inclusion of water molecules in the structure.     

One donor–two acceptor (D–A1)‐(D–A2) random terpolymers containing perylene diimide,naphthalene diimide,and carbazole units

A series of one donor–two acceptor (D–A₁)‐(D–A₂) random terpolymers containing a 2,7‐carbazole donor and varying compositions of perylene diimide (PDI) and naphthalene diimide (NDI) acceptors was synthesized via Suzuki coupling polymerization. The optical properties of the terpolymers are weighted sums of the constituent parent copolymers and all show strong absorption over the 400 to 700 nm range with optical bandgaps ranging from 1.77 to 1.87 eV, depending on acceptor composition. The copolymers were tested as acceptor materials in bulk heterojunction all‐polymer solar cells using poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo[1,2‐b;4,5‐b′]dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene)‐2,6‐diyl] (PBDTTT‐C) as the donor material. In contrast to the optoelectronic properties, the measured device parameters are not composition dependent, and rather depend solely on the presence of the NDI unit, where the devices containing any amount of NDI perform half as well as those using the parent polymer containing only carbazole and PDI. Overall this is the first example of a one donor–two acceptor random terpolymer system containing perylene diimide (PDI) and naphthalene diimide (NDI) acceptor units, and demonstrates a facile method of tuning polymer optoelectronic properties while minimizing the need for complicated synthetic and purification steps. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3337–3345     

An N‐Heterocyclic Silylene‐Stabilized Digermanium(0) Complex

The synthesis of an N‐heterocyclic silylene‐stabilized digermanium(0) complex is described. The reaction of the amidinate‐stabilized silicon(II) amide [LSiN(SiMe₃)₂] ( 1 ; L=PhC(NtBu)₂) with GeCl₂?dioxane in toluene afforded the Si^II–Ge^II adduct [L{(Me₃Si)₂N}Si→GeCl₂] ( 2 ). Reaction of the adduct with two equivalents of KC₈ in toluene at room temperature afforded the N‐heterocyclic carbene silylene‐stabilized digermanium(0) complex [L{(Me₃Si)₂N}Si→ Ge?Ge←Si{N(SiMe₃)₂}L] ( 3 ). X‐ray crystallography and theoretical studies show conclusively that the N‐heterocyclic silylenes stabilize the singlet digermanium(0) moiety by a weak synergic donor–acceptor interaction.     

The Bis(ferrocenyl)phosphenium Ion Revisited

The bis(ferrocenyl)phosphenium ion, [Fc₂P]⁺, reported by Cowley et al. (J. Am. Chem. Soc. 1981 , 103, 714–715), was the only claimed donor‐free divalent phosphenium ion. Our examination of the molecular and electronic structure reveals that [Fc₂P]⁺ possesses significant intramolecular Fe???P contacts, which are predominantly electrostatic and moderate the Lewis acidity. Nonetheless, [Fc₂P]⁺ undergoes complex formation with the Lewis bases PPh₃ and IPr to give the donor–acceptor complexes [Fc₂P(PPh₃)]⁺ and [Fc₂P(IPr)]⁺ (IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazole‐2‐ylidene).     

Conjugated random terpolymers based on benzodithiophene,diketopyrrolopyrrole, and 8,10‐bis(thiophen‐2‐yl)‐2,5‐di(nonadecan‐3‐yl)bis[1,3]thiazolo[4,5‐f:5′,4′‐h]thieno[3,4‐b]quinoxaline for Efficient Polymer Solar Cell

A series of novel donor–acceptor (D–A) random conjugated terpolymers P2‐P4 along with the homopolymers P1 (BDT‐DPP) and P5 (BDT‐BTDQ) were designed and synthesized by copolymerizing a benzo[1,2‐b:4,5‐b]dithiophene (BDT) donor with an electron‐deficient diketopyrrolo[3,4‐c]pyrrole (DPP) unit and a benzothiadiazolo[3,4‐e]quinoxaline (BTDQ) moieties of different electron‐withdrawing strengths, and the resultant terpolymers showed broad absorption profile ranging from 300 to 1200 nm. The HOMO levels of the polymers were adjusted from ?5.23 to ?5.11 eV, and the optical bandgaps were controlled from 1.32 to 1.13 eV by changing the molar ratio of DPP and BTDQ acceptors. These terpolymers were used as a donor along with PC₇₁BM as an acceptor for the creation of polymer solar cells, and the performance was optimized via variable the donor to acceptor ratio and solvent vapor annealing. The polymer solar cells made from the random terpolymer P3 showed the highest overall power conversion efficiency of (9.27%), which is higher than that for the corresponding homo‐polymers counterparts, that is, P1 (7.27%) and P5 (7.68%). The results demonstrate that the designing of random D‐A1‐D‐A2 terpolymers may be the best approach for efficient polymer solar cells. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1478–1485     

NIR Absorbing Squaraines by Extension of the Conjugation with (Aminothiazolyl)ethenyl Groups

The bis{4‐{2‐[2‐(dialkylamino)thiazol‐5‐yl]ethenyl}‐2,6‐dihydroxyphenyl}squaraines 12a , b were synthesized from ethyl carbonochloridate ( 1 ) in six steps (Scheme). The donor–acceptor–donor systems 12a , b are dark blue dyes with absorption maxima in the NIR region, unless the measurements are performed in the presence of EtOH. In the latter case, the long‐wavelength band disappears, and the absorption in the UV region is strongly enhanced. The λ_max values in CHCl₃ and CHCl₃/EtOH differ by more than 450 nm. The completely reversible effect can be rationalized by the reversible degradation of intramolecular H‐bonds and a consequent torsion between the acceptor and the donor moieties.