Selective Solid‐Liquid Interface Sulfidation Growth of Hierarchical Copper Sulfide and Its Hybrid Nanoflakes for Superior Lithium‐Ion Storage

Two‐dimensional metal sulfides and their hybrids are emerging as promising candidates in various areas. Yet, it remains challenging to synthesize high‐quality 2D metal sulfides and their hybrids, especially iso‐component hybrids, in a simple and controllable way. In this work, a low‐temperature selective solid‐liquid sulfidation growth method has been developed for the synthesis of CuS nanoflakes and their hybrids. CuS nanoflakes of about 20 nm thickness and co‐component hybrids CuO_x/CuS with variable composition ratios derived from different sulfidation time are obtained after the residual sulfur removal. Besides, benefiting from the mild low‐temperature sulfidation conditions, selective sulfidation is realized between Cu and Fe to yield iso‐component FeO_x/CuS 2D nanoflakes of about 10–20 nm thickness, whose composition ratio is readily tunable by controlling the precursor. The as‐synthesized FeO_x/CuS nanoflakes demonstrate superior lithium storage performance (i. e., 707 mAh g^?1 at 500 mA g^?1 and 627 mAh g^?1 at 1000 mA g^?1 after 450 cycles) when tested as anode materials in LIBs owing to the advantages of the ultrathin 2D nanostructure as well as the lithiation volumetric strain self‐reconstruction effect of the co‐existing two phases during charging/discharging processes.     

Long‐Life Room‐Temperature Sodium–Sulfur Batteries by Virtue of Transition‐Metal‐Nanocluster–Sulfur Interactions

Room‐temperature sodium–sulfur (RT‐Na/S) batteries hold significant promise for large‐scale application because of low cost of both sodium and sulfur. However, the dissolution of polysulfides into the electrolyte limits practical application. Now, the design and testing of a new class of sulfur hosts as transition‐metal (Fe, Cu, and Ni) nanoclusters (ca. 1.2 nm) wreathed on hollow carbon nanospheres (S@M‐HC) for RT‐Na/S batteries is reported. A chemical couple between the metal nanoclusters and sulfur is hypothesized to assist in immobilization of sulfur and to enhance conductivity and activity. S@Fe‐HC exhibited an unprecedented reversible capacity of 394 mAh g^?1 despite 1000 cycles at 100 mA g^?1, together with a rate capability of 220 mAh g^?1 at a high current density of 5 A g^?1. DFT calculations underscore that these metal nanoclusters serve as electrocatalysts to rapidly reduce Na₂S₄ into short‐chain sulfides and thereby obviate the shuttle effect.     

A Pyrazine‐Based Polymer for Fast‐Charge Batteries

The lack of high‐power and stable cathodes prohibits the development of rechargeable metal (Na, Mg, Al) batteries. Herein, poly(hexaazatrinaphthalene) (PHATN), an environmentally benign, abundant and sustainable polymer, is employed as a universal cathode material for these batteries. In Na‐ion batteries (NIBs), PHATN delivers a reversible capacity of 220 mAh g^?1 at 50 mA g^?1, corresponding to the energy density of 440 Wh kg^?1, and still retains 100 mAh g^?1 at 10 Ag^?1 after 50 000 cycles, which is among the best performances in NIBs. Such an exceptional performance is also observed in more challenging Mg and Al batteries. PHATN retains reversible capacities of 110 mAh g^?1 after 200 cycles in Mg batteries and 92 mAh g^?1 after 100 cycles in Al batteries. DFT calculations, X‐ray photoelectron spectroscopy, Raman, and FTIR show that the electron‐deficient pyrazine sites in PHATN are the redox centers to reversibly react with metal ions.     

Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.     

Amidation‐Dominated Re‐Assembly Strategy for Single‐Atom Design/Nano‐Engineering: Constructing Ni/S/C Nanotubes with Fast and Stable K‐Storage

An amidation‐dominated re‐assembly strategy is developed to prepare uniform single atom Ni/S/C nanotubes. In this re‐assembly process, a single‐atom design and nano‐structured engineering are realized simultaneously. Both the NiO₅ single‐atom active centers and nanotube framework endow the Ni/S/C ternary composite with accelerated reaction kinetics for potassium‐ion storage. Theoretical calculations and electrochemical studies prove that the atomically dispersed Ni could enhance the convention kinetics and decrease the decomposition energy barrier of the chemically‐absorbed small‐molecule sulfur in Ni/S/C nanotubes, thus lowering the electrode reaction overpotential and resistance remarkably. The mechanically stable nanotube framework could well accommodate the volume variation during potassiation/depotassiation process. As a result, a high K‐storage capacity of 608 mAh g^?1 at 100 mA g^?1 and stable cycling capacity of 330.6 mAh g^?1 at 1000 mA g^?1 after 500 cycles are achieved.     

Highly Porous NiCoSe4 Microspheres as High‐Performance Anode Materials for Sodium‐Ion Batteries

Binary transition metal selenides have been more promising than single transition metal selenides as anode materials for sodium‐ion batteries (SIBs). However, the controlled synthesis of transition metal selenides, especially those derived from metal‐organic‐frameworks with well‐controlled structure and morphology is still challenging. In this paper, highly porous NiCoSe₄@NC composite microspheres were synthesized by simultaneous carbonization and selenization of a Ni?Co‐based metal‐organic framework (NiCo‐MOF) and characterized by scanning electron microscopy, transition electron microscopy, X‐Ray diffraction, X‐Ray photoelectron spectroscopy and electrochemical techniques. The rationally engineered NiCoSe₄@NC composite exhibits a capacity of 325 mAh g^?1 at a current density of 1 A g^?1, and 277.8 mAh g^?1 at 10 A g^?1. Most importantly, the NiCoSe₄@NC retains a capacity of 293 mAh g^?1 at 1 A g^?1 after 1500 cycles, with a capacity decay rate of 0.025 % per cycle.     

Alkali‐Metal‐Ion‐Functionalized Graphene Oxide as a Superior Anode Material for Sodium‐Ion Batteries

Although graphene oxide (GO) has large interlayer spacing, it is still inappropriate to use it as an anode for sodium‐ion batteries (SIBs) because of the existence of H‐bonding between the layers and ultralow electrical conductivity which impedes the Na⁺ and e^? transformation. To solve these issues, chemical, thermal, and electrochemical procedures are traditionally employed to reduce GO nanosheets. However, these strategies are still unscalable, consume high amounts of energy, and are expensive for practical application. Here, for the first time, we describe the superior Na storage of unreduced GO by a simple and scalable alkali‐metal‐ion (Li⁺, Na⁺, K⁺)‐functionalized process. The various alkali metals ions, connecting with the oxygen on GO, have played different effects on morphology, porosity, degree of disorder, and electrical conductivity, which are crucial for Na‐storage capabilities. Electrochemical tests demonstrated that sodium‐ion‐functionalized GO (GNa) has shown outstanding Na‐storage performance in terms of excellent rate capability and long‐term cycle life (110 mAh g^?1 after 600 cycles at 1 A g^?1) owing to its high BET area, appropriate mesopore, high degree of disorder, and improved electrical conductivity. Theoretical calculations were performed using the generalized gradient approximation (GGA) to further study the Na‐storage capabilities of functionalized GO. These calculations have indicated that the Na?O bond has the lowest binding energy, which is beneficial to insertion/extraction of the sodium ion, hence the GNa has shown the best Na‐storage properties among all comparatives functionalized by other alkali metal ions.     

Bimetal‐organic Framework‐derived Co9S8/ZnS@NC Heterostructures for Superior Lithium‐ion Storage

Heterostructure engineering of electrode materials, which is expected to accelerate the ion/electron transport rates driven by a built‐in internal electric field at the heterointerface, offers unprecedented promise in improving their cycling stability and rate performance. Herein, carbon nanotubes with Co₉S₈/ZnS heterostructures embedded in a N‐doped carbon framework (Co₉S₈/ZnS@NC) have been rationally designed via an in‐situ vapor chemical transformation strategy with the aid of thiophene, which not only acted as carbon source for the growth of carbon nanotubes but also as sulfur source for the sulfurization of metal Zn and Co. Density functional theory (DFT) calculation shows an about 3.24 eV electrostatic potential difference between ZnS and Co₉S₈, which results in a strong electrostatic field across the interface that makes electrons transfer from Co₉S₈ to the ZnS side. As expected, a stable cycling performance with reversible capacity of 411.2 mAh g^?1 at 1000 mA g^?1 after 300 cycles, excellent rate capability (324 mAh g^?1 at 2000 A g^?1) and a high percentage of pseudocapacitance contribution (87.5% at 2.2 mv/s) for lithium‐ion batteries (LIBs) are achieved. This work provides a possible strategy for designing multicomponent heterostructural materials for application in energy storage and conversion fields.     

Low‐Temperature Synthesis of Honeycomb CuP2@C in Molten ZnCl2 Salt for High‐Performance Lithium Ion Batteries

Phosphorus‐rich metal phosphides have very high lithium storage capacities, but they are difficult to prepare. A low‐temperature phosphorization method based on Mg reducing PCl₃ in ZnCl₂ molten salt at 300 °C is developed to synthesize phosphorus‐rich CuP₂@C from a Cu‐MOF derived Cu@C composite. Abnormal oxidation of Cu by Zn²⁺ in the molten salt is observed, which leads to the porous honeycomb nanostructure and homogeneously distributed ultrafine CuP₂ nanocrystals. The honeycomb CuP₂@C exhibits excellent lithium storage performance with high reversible capacity (1146 mAh g^?1 at 0.2 A g^?1) and superior cycling stability (720 mAh g^?1 after 600 cycles at 1.0 A g^?1), showing the promising application of P‐rich metal phosphides in lithium ion batteries.     

Fiber‐in‐Tube Design of Co9S8‐Carbon/Co9S8: Enabling Efficient Sodium Storage

The sodium‐ion battery is a promising battery technology owing to its low price and high abundance of sodium. However, the sluggish kinetics of sodium ion makes it hard to achieve high‐rate performance, therefore impairing the power density. In this work, a fiber‐in‐tube Co₉S₈‐carbon(C)/Co₉S₈ is designed with fast sodiation kinetics. The experimental and simulation analysis show that the dominating capacitance mechanism for the high Na‐ion storage performance is due to abundant grain boundaries, three exposed layer interfaces, and carbon wiring in the design. As a result, the fiber‐in‐tube hybrid anode shows a high specific capacity of 616 mAh g^?1 after 150 cycles at 0.5 A g^?1. At 1 A g^?1, a capacity of ca. 451 mAh g^?1 can be achieved after 500 cycles. More importantly, a high energy density of 779 Wh kg^?1 and power density of 7793 W kg^?1 can be obtained simultaneously.     

Porous Carbon Anodes for a High Capacity Lithium‐Ion Battery Obtained by Incorporating Silica into Benzoxazine During Polymerization

Porous carbon anodes with a controllable V_mes/V_mic ratio were synthesized through the self‐assembly of poly(benzoxazine‐co‐resol) and the simultaneous hydrolysis of tetraethyl orthosilicate (TEOS) followed by carbonization and removal of silica. The V_mes/V_mic ratio of the carbon can be controlled in the range of approximately 1.3–32.6 through tuning the amount of TEOS. For lithium‐ion battery anodes, a correlation between the electrochemical performance and V_mes/V_mic ratio has been established. A high V_mes/V_mic ratio in porous carbons is favorable for enhancing the accessibility of Li ions to active sites provided by the micropores and for achieving good lithium storage performance. The obtained porous carbon exhibits a high reversible capacity of 660 mAh g^?1 after 70 cycles at a current density of 100 mA g^?1. Moreover, at a high current density of 3000 mA g^?1, the capacity still remains at 215 mAh g^?1, showing a fast charge‐discharge potential. This synthesis method relying on modified benzoxazine chemistry with the hydrolysis of TEOS may provide a new route for the development of mesoporous carbon‐based electrode materials.     

A Self‐Standing and Flexible Electrode of Yolk–Shell CoS2 Spheres Encapsulated with Nitrogen‐Doped Graphene for High‐Performance Lithium‐Ion Batteries

Flexible lithium‐ion batteries (LIBs) have recently attracted increasing attention with the fast development of bendable electronic systems. Herein, a facile and template‐free solvothermal method is presented for the fabrication of hybrid yolk–shell CoS₂ and nitrogen‐doped graphene (NG) sheets. The yolk–shell architecture of CoS₂ encapsulated with NG coating is designed for the dual protection of CoS₂ to address the structural and interfacial stability concerns facing the CoS₂ anode. The as‐prepared composite can be assembled into a film, which can be used as a binder‐free and flexible electrode for LIBs that does not require any carbon black conducting additives or current collectors. When evaluating lithium‐storage properties, such a flexible electrode exhibits a high specific capacity of 992 mAh g^?1 in the first reversible discharge capacity at a current rate of 100 mA g^?1 and high reversible capacity of 882 mAh g^?1 after 150 cycles with excellent capacity retention of 89.91 %. Furthermore, a reversible capacity as high as 655 mAh g^?1 is still achieved after 50 cycles even at a high rate of 5 C due to the yolk–shell structure and NG coating, which not only provide short Li‐ion and electron pathways, but also accommodate large volume variation.     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

Porous Nitrogen‐Doped Carbon Nanotubes Derived from Tubular Polypyrrole for Energy‐Storage Applications

Porous nitrogen‐doped carbon nanotubes (PNCNTs) with a high specific surface area (1765 m² g^?1) and a large pore volume (1.28 cm³ g^?1) have been synthesized from a tubular polypyrrole (T‐PPY). The inner diameter and wall thickness of the PNCNTs are about 55 nm and 22 nm, respectively. This material shows extremely promising properties for both supercapacitors and for encapsulating sulfur as a superior cathode material for high‐performance lithium–sulfur (Li‐S) batteries. At a current density of 0.5 A g^?1, PNCNT presents a high specific capacitance of 210 F g^?1, as well as excellent cycling stability at a current density of 2 A g^?1. When the S/PNCNT composite was tested as the cathode material for Li‐S batteries, the initial discharge capacity was 1341 mAh g^?1 at a current rate of 1 C and, even after 50 cycles at the same rate, the high reversible capacity was retained at 933 mAh g^?1. The promising electrochemical energy‐storage performance of the PNCNTs can be attributed to their excellent conductivity, large surface area, nitrogen doping, and unique pore‐size distribution.     

A Black Phosphorus–Graphite Composite Anode for Li‐/Na‐/K‐Ion Batteries

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In‐depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP‐based composites for high‐performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li⁺, Na⁺, and K⁺ with BP were performed. Ex situ X‐ray absorption near‐edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K⁺ storage than for Na⁺ and Li⁺, which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K₃P, compared with Li₃P and Na₃P. As a result, restricting the formation of K₃P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g^?1 which retains at 600 mAh g^?1 after 50 cycles at 0.25 A g^?1.     

Freeze‐Drying‐Assisted Synthesis of Hierarchically Porous Carbon/Germanium Hybrid for High‐Efficiency Lithium‐Ion Batteries

Herein, an approach is reported to prepare porous a carbon/Ge (C/Ge) hybrid. In this hybrid, Ge nanoparticles are closely embedded in a highly conductive and flexible carbon matrix. Such a hybrid features a high surface area (128.0 m² g^?1) and a hierarchical micropore–mesopore structure. When used as an anode material in lithium‐ion batteries (LIBs), the as‐prepared hybrid [C/Ge (60.37 %)] exhibits an improved lithium storage performance with regard to its capacity and rate capability compared to its counterparts. More specifically, it can maintain a specific capacity as high as 906 mAh g^?1 at a high current density of 0.6 A g^?1 after 50 cycles. The excellent lithium storage performance of the C/Ge (60.37 %) sample can be attributed to synergetic effects between the carbon matrix and Ge nanoparticles. The method we adopted is simple and effective, and can be extended to fabricate other nanomaterials.     

Lithium Germanate (Li2GeO3): A High‐Performance Anode Material for Lithium‐Ion Batteries

A simple, cost‐effective, and easily scalable molten salt method for the preparation of Li₂GeO₃ as a new type of high‐performance anode for lithium‐ion batteries is reported. The Li₂GeO₃ exhibits a unique porous architecture consisting of micrometer‐sized clusters (secondary particles) composed of numerous nanoparticles (primary particles) and can be used directly without further carbon coating which is a common exercise for most electrode materials. The new anode displays superior cycling stability with a retained charge capacity of 725 mAh g^?1 after 300 cycles at 50 mA g^?1. The electrode also offers excellent rate capability with a capacity recovery of 810 mAh g^?1 (94 % retention) after 35 cycles of ascending steps of current in the range of 25–800 mA g^?1 and finally back to 25 mA g^?1. This work emphasizes the importance of exploring new electrode materials without carbon coating as carbon‐coated materials demonstrate several drawbacks in full devices. Therefore, this study provides a method and a new type of anode with high reversibility and long cycle stability.     

In‐Situ Fabrication of Bone‐Like CoSe2 Nano‐Thorn Loaded on Porous Carbon Cloth as a Flexible Electrode for Na‐Ion Storage

Sodium‐ion batteries (SIBs) based on flexible electrode materials are being investigated recently for improving sluggish kinetics and developing energy density. Transition metal selenides present excellent conductivity and high capacity; nevertheless, their low conductivity and serious volume expansion raise challenging issues of inferior lifespan and capacity fading. Herein, an in‐situ construction method through carbonization and selenide synergistic effect is skillfully designed to synthesize a flexible electrode of bone‐like CoSe₂ nano‐thorn coated on porous carbon cloth. The designed flexible CoSe₂ electrode with stable structural feature displays enhanced Na‐ion storage capabilities with good rate performance and outstanding cycling stability. As expected, the designed SIBs with flexible BL?CoSe₂/PCC electrode display excellent reversible capacity with 360.7 mAh g^?1 after 180 cycles at a current density of 0.1 A g^?1.     

Nanostructured Carbon/Antimony Composites as Anode Materials for Lithium‐Ion Batteries with Long Life

A series of nanostructured carbon/antimony composites have been successfully synthesized by a simple sol–gel, high‐temperature carbon thermal reduction process. In the carbon/antimony composites, antimony nanoparticles are homogeneously dispersed in the pyrolyzed nanoporous carbon matrix. As an anode material for lithium‐ion batteries, the C/Sb10 composite displays a high initial discharge capacity of 1214.6 mAh g^?1 and a reversible charge capacity of 595.5 mAh g^?1 with a corresponding coulombic efficiency of 49 % in the first cycle. In addition, it exhibits a high reversible discharge capacity of 466.2 mAh g^?1 at a current density of 100 mA g^?1 after 200 cycles and a high rate discharge capacity of 354.4 mAh g^?1 at a current density of 1000 mA g^?1. The excellent cycling stability and rate discharge performance of the C/Sb10 composite could be due to the uniform dispersion of antimony nanoparticles in the porous carbon matrix, which can buffer the volume expansion and maintain the integrity of the electrode during the charge–discharge cycles.     

A Sodiophilic Interphase‐Mediated,Dendrite‐Free Anode with Ultrahigh Specific Capacity for Sodium‐Metal Batteries

Despite efforts to stabilize sodium metal anodes and prevent dendrite formation, achieving long cycle life with high areal capacities remains difficult owing to a combination of complex failure modes that involve retardant uneven sodium nucleation and subsequent dendrite formation. Now, a sodiophilic interphase based on oxygen‐functionalized carbon nanotube networks is presented, which concurrently facilitates a homogeneous sodium nucleation and a dendrite‐free, lateral growth behavior upon recurring sodium plating/stripping processes. This sodiophilic interphase renders sodium anodes with an ultrahigh capacity of 1078 mAh g^?1 (areal capacity of 10 mAh cm^?2), approaching the theoretical capacity of 1166 mAh g^?1 of pure sodium, as well as a long cycle life up to 3000 cycles. Implementation of this anode allows for the construction of a sodium–air battery with largely enhanced cycling performance owing to the oxygen functionalization‐mediated, dendrite‐free sodium morphology.