环境友好型无铅卤化物钙钛矿太阳能电池研究进展

ABX_3(A为甲胺、甲脒等有机离子或铯离子,B为铅或锡等金属离子,X为溴、碘等卤化物离子)卤化物钙钛矿材料具有优异的光电特性,是当前太阳能电池研究的前沿和热点之一。然而,这类太阳能电池普遍面临含毒性元素铅和稳定性差等问题,极大地阻碍了钙钛矿太阳能电池商业化应用进程。因此,发展新型高效无铅钙钛矿太阳能电池势在必行。本文评述了环境友好型无铅卤化物钙钛矿太阳能电池的最新研究动态和进展,探讨了该类太阳能电池的制备、性能及其稳定性等问题,展望了其未来发展趋势。     

Long-Term Stability Analysis of 3D and 2D/3D Hybrid Perovskite Solar Cells Using Electrochemical Impedance Spectroscopy

Despite the remarkable progress in perovskite solar cells (PSCs), their instability and rapid degradation over time still restrict their commercialization. A 2D capping layer has been proved to overcome the stability issues; however, an in-depth understanding of the complex degradation processes over a prolonged time at PSC interfaces is crucial for improving their stability. In the current work, we investigated the stability of a triple cation 3D ([(FA_0.83MA_0.17)Cs_0.05]Pb(I_0.83Br_0.17)₃) and 2D/3D PSC fabricated by a layer-by-layer deposition technique (PEAI-based 2D layer over triple cation 3D perovskite) using a state-of-art characterization technique: electrochemical impedance spectroscopy (EIS). A long-term stability test over 24 months was performed on the 3D and 2D/3D PSCs with an initial PCE of 18.87% and 20.21%, respectively, to suggest a more practical scenario. The current-voltage (J-V) and EIS results showed degradation in both the solar cell types; however, a slower degradation rate was observed in 2D/3D PSCs. Finally, the quantitative analysis of the key EIS parameters affected by the degradation in 3D and 2D/3D PSCs were discussed.     

Steric Mixed‐Cation 2D Perovskite as a Methylammonium Locker to Stabilize MAPbI3

The reduced dimension perovskite including 2D perovskites are one of the most promising strategies to stabilize lead halide perovskite. A mixed‐cation 2D perovskite based on a steric phenyltrimethylammonium (PTA) cation is presented. The PTA‐MA mixed‐cation 2D perovskite of PTAMAPbI₄ can be formed on the surface of MAPbI₃ (PTAI‐MAPbI₃) by controllable PTAI intercalation by either spin coating or soaking. The PTAMAPbI₄ capping layer can not only passivate PTAI‐MAPbI₃ perovskite but also act as MA⁺ locker to inhibit MAI extraction and significantly enhance the stability. The highly stable PTAI‐MAPbI₃ based perovskite solar cells exhibit a reproducible photovoltaic performance with a champion PCE of 21.16 %. Such unencapsulated devices retain 93 % of initial efficiency after 500 h continuous illumination. This steric mixed‐cation 2D perovskite as MA⁺ locker to stabilize the MAPbI₃ is a promising strategy to design stable and high‐performance hybrid lead halide perovskites.     

The Second Spacer Cation Assisted Growth of a 2D Perovskite Film with Oriented Large Grain for Highly Efficient and Stable Solar Cells

The fabrication of high‐quality film with large grains oriented along the direction of film thickness is important for 2D Ruddlesden–Popper perovskite‐based solar cells (PVSCs). High‐quality 2D BA₂MA_n?1Pb_nI_3n+1 (BA⁺=butylammonium, MA⁺=methylammonium, n=5) perovskite films were fabricated with a grain size of over 1 μm and preferential orientation growth by introducing a second spacer cation (SSC⁺) into the precursor solution. Dynamic light scattering showed that SSC⁺ addition can induce aggregation in the precursor solution. The precursor aggregates are favorable for the formation of large crystal grains by inducing nucleation and decreasing the nucleation sites. Applying phenylethylammonium as SSC⁺, the optimized inverted planar PVSCs presented a maximum PCE of 14.09 %, which is the highest value of the 2D BA₂MA_n?1Pb_nI_3n+1 (n=5) PVSCs. The unsealed device shows good moisture stability by maintaining around 90 % of its initially efficiency after 1000 h exposure to air (Hr=25±5 %).     

Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

Nucleation and Crystallization in 2D Ruddlesden-Popper Perovskites using Formamidinium-based Organic Semiconductor Spacers for Efficient Solar Cells

The conjugated organic semiconductor spacers have drawn wide attention in two-dimensional (2D) perovskites and formamidinium (FA) has been widely used as A-site cation in high-performance 3D perovskite solar cells (PSCs). However, the FA-based semiconductor spacers have rarely been investigated in 2D Ruddlesden-Popper (RP) perovskites. Here, we developed two FA-based spacers containing thieno[3,2-b]thiophene (TT) and 2,2′-bithiophene (BT) units, namely TTFA and BTFA, respectively, for 2D RP PSCs. The nucleation and crystallization kinetics of TTFA-Pb and BTFA-Pb from sol-gel to film were investigated using in situ optical microscopy and in situ grazing incidence wide-angle X-ray scattering (GIWAXS) measurements. It is found that the TTFA spacer could reduce the energy barrier of nucleation and induces crystal vertical orientation of 2D perovskite by forming larger clusters in precursor solution, resulting in much improved film quality. Benefiting from the enlarged crystal grains, reduced exciton binding energy, and decreased electron-phonon coupling coefficient, the photovoltaic device based on (TTFA)₂MA_n−1Pb_nI_3n+1 (n=5) achieved a champion efficiency of 19.41 %, which is a record for 2D RP PSCs with FA-based spacers. Our work provides deep understanding of the nucleation and crystallization process of 2D RP perovskite films and highlights the great potential of FA-based semiconductor spacers in highly efficient 2D PSCs.     

Alloying n‐Butylamine into CsPbBr3 To Give a Two‐Dimensional Bilayered Perovskite Ferroelectric Material

Cesium‐lead halide perovskites (e.g. CsPbBr₃) have gained attention because of their rich physical properties, but their bulk ferroelectricity remains unexplored. Herein, by alloying flexible organic cations into the cubic CsPbBr₃, we design the first cesium‐based two‐dimensional (2D) perovskite ferroelectric material with both inorganic alkali metal and organic cations, (C₄H₉NH₃)₂CsPb₂Br₇ ( 1 ). Strikingly, 1 shows a high Curie temperature (T_c=412 K) above that of BaTiO₃ (ca. 393 K) and notable spontaneous polarization (ca. 4.2 μC cm^?2), triggered by not only the ordering of organic cations but also atomic displacement of inorganic Cs⁺ ions. To our knowledge, such a 2D bilayered Cs⁺‐based metal–halide perovskite ferroelectric material with inorganic and organic cations is unprecedented. 1 also shows photoelectric semiconducting behavior with large “on/off” ratios of photoconductivity (>10³).     

Ion‐Exchange‐Induced 2D–3D Conversion of HMA1−xFAxPbI3Cl Perovskite into a High‐Quality MA1−xFAxPbI3 Perovskite

High‐quality phase‐pure MA_1?xFA_xPbI₃ planar films (MA=methylammonium, FA=formamidinium) with extended absorption and enhanced thermal stability are difficult to deposit by regular simple solution chemistry approaches owing to crystallization competition between the easy‐to‐crystallize but unwanted δ‐FAPbI₃/MAPbI₃ and FA_xMA_1?xPbI₃ requiring rigid crystallization conditions. Here A 2D–3D conversion to transform compact 2D mixed composition HMA_1?xFA_xPbI₃Cl perovskite precursor films into 3D MA_1?xFA_xPbI₃ (x=0.1–0.9) perovskites is presented. The designed Cl/I and H/FA(MA) ion exchange reaction induced fast transformation of compact 2D perovskite film, helping to form the phase‐pure and high quality MA_1?xFA_xPbI₃ without δ‐FAPbI₃ and MAPbI₃ impurity. In all, we successfully developed a facile one‐step method to fabricate high quality phase‐pure MA_1?xFA_xPbI₃ (x=0.1–0.9) perovskite films by 2D–3D conversion of HMA_1?xFA_xPbI₃Cl perovskite. This 2D–3D conversion is a promising strategy for lead halide perovskite fabrication.     

All‐Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Recently, lead halide‐based perovskites have become one of the hottest topics in photovoltaic research because of their excellent optoelectronic properties. Among them, organic‐inorganic hybrid perovskite solar cells (PSCs) have made very rapid progress with their power conversion efficiency (PCE) now at 23.7 %. However, the intrinsically unstable nature of these materials, particularly to moisture and heat, may be a problem for their long‐term stability. Replacing the fragile organic group with more robust inorganic Cs⁺ cations forms the cesium lead halide system (CsPbX₃, X is halide) as all‐inorganic perovskites which are much more thermally stable and often more stable to other factors. From the first report in 2015 to now, the PCE of CsPbX₃‐based PSCs has abruptly increased from 2.9 % to 17.1 % with much enhanced stability. In this Review, we summarize the field up to now, propose solutions in terms of development bottlenecks, and attempt to boost further research in CsPbX₃ PSCs.     

Boosting Charge Transport in a 2D/3D Perovskite Heterostructure by Selecting an Ordered 2D Perovskite as the Passivator

We demonstrate that an ordered 2D perovskite can significantly boost the photoelectric performance of 2D/3D perovskite heterostructures. Using selective fluorination of phenyl-ethyl ammonium (PEA) lead iodide to passivate 3D FA_0.8Cs_0.2PbI₃, we find that the 2D/3D perovskite heterostructures passivated by a higher ordered 2D perovskite have lower Urbach energy, yielding a remarkable increase in photoluminescence (PL) intensity, PL lifetime, charge-carrier mobilities (ϕμ), and carrier diffusion length (L_D) for a certain 2D perovskite content. High performance with an ultralong PL lifetime of ≈1.3 μs, high ϕμ of ≈18.56 cm² V⁻¹ s⁻¹, and long L_D of ≈7.85 μm is achieved in the 2D/3D films when passivated by 16.67 % para-fluoro-PEA₂PbI₄. This carrier diffusion length is comparable to that of some perovskite single crystals (>5 μm). These findings provide key missing information on how the organic cations of 2D perovskites influence the performance of 2D/3D perovskite heterostructures.     

Stabilization of Highly Efficient and Stable Phase‐Pure FAPbI3 Perovskite Solar Cells by Molecularly Tailored 2D‐Overlayers

As a result of their attractive optoelectronic properties, metal halide APbI₃ perovskites employing formamidinium (FA⁺) as the A cation are the focus of research. The superior chemical and thermal stability of FA⁺ cations makes α‐FAPbI₃ more suitable for solar‐cell applications than methylammonium lead iodide (MAPbI₃). However, its spontaneous conversion into the yellow non‐perovskite phase (δ‐FAPbI₃) under ambient conditions poses a serious challenge for practical applications. Herein, we report on the stabilization of the desired α‐FAPbI₃ perovskite phase by protecting it with a two‐dimensional (2D) IBA₂FAPb₂I₇ (IBA=iso‐butylammonium overlayer, formed via stepwise annealing. The α‐FAPbI₃/IBA₂FAPb₂I₇ based perovskite solar cell (PSC) reached a high power conversion efficiency (PCE) of close to 23 %. In addition, it showed excellent operational stability, retaining around 85 % of its initial efficiency under severe combined heat and light stress, that is, simultaneous exposure with maximum power tracking to full simulated sunlight at 80 °C over 500 h.     

Steric Mixed-Cation 2D Perovskite as a Methylammonium Locker to Stabilize MAPbI3

The reduced dimension perovskite including 2D perovskites are one of the most promising strategies to stabilize lead halide perovskite. A mixed-cation 2D perovskite based on a steric phenyltrimethylammonium (PTA) cation is presented. The PTA-MA mixed-cation 2D perovskite of PTAMAPbI₄ can be formed on the surface of MAPbI₃ (PTAI-MAPbI₃) by controllable PTAI intercalation by either spin coating or soaking. The PTAMAPbI₄ capping layer can not only passivate PTAI-MAPbI₃ perovskite but also act as MA⁺ locker to inhibit MAI extraction and significantly enhance the stability. The highly stable PTAI-MAPbI₃ based perovskite solar cells exhibit a reproducible photovoltaic performance with a champion PCE of 21.16 %. Such unencapsulated devices retain 93 % of initial efficiency after 500 h continuous illumination. This steric mixed-cation 2D perovskite as MA⁺ locker to stabilize the MAPbI₃ is a promising strategy to design stable and high-performance hybrid lead halide perovskites.     

Enhanced Lifetime and Photostability with Low‐Temperature Mesoporous ZnTiO3/Compact SnO2 Electrodes in Perovskite Solar Cells

Perovskite solar cells (PSCs) with power conversion efficiencies (PCEs) of 25 % mainly have SnO₂ or TiO₂ as electron‐transporting layers (ETLs). Now, zinc titanate (ZnTiO₃, ZTO) is proposed as mesoporous ETLs owing to its weak photo‐effect, excellent carrier extraction, and transfer properties. Uniform mesoporous films were obtained by spinning coating the ZTO ink and annealed below 150 °C. Photovoltaic devices based on Cs_0.05FA_0.81MA_0.14PbI_2.55B_r0.45 perovskite sandwiched between SnO₂‐mesorporous ZTO electrode and Spiro‐OMeTAD layer achieved the PCE of 20.5 %. The PSCs retained more than 95 % of their original efficiency after 100 days lifetime test without being encapsulated. Additionally, the PSCs retained over 95 % of the initial performance when subjected at the maximum power point voltage for 120 h under AM 1.5 G illumination (100 mW cm^?2), demonstrating superior working stability. The application of ZTO provides a better choice for ETLs of PSCs.     

Lead‐ and Iodide‐Deficient (CH3NH3)PbI3 (d‐MAPI): The Bridge between 2D and 3D Hybrid Perovskites

3D and 2D hybrid perovskites, which have been known for more than 20 years, have emerged recently as promising materials for optoelectronic applications, particularly the 3D compound (CH₃NH₃)PbI₃ (MAPI). The discovery of a new family of hybrid perovskites called d ‐MAPI is reported: the association of PbI₂ with both methyl ammonium (MA⁺) and hydroxyethyl ammonium (HEA⁺) cations leads to a series of five compounds with general formulation (MA)_1−2.48x(HEA)_3.48x[Pb_1−xI_3−x]. These materials, which are lead‐ and iodide‐deficient compared to MAPI while retaining 3D architecture, can be considered as a bridge between the 2D and 3D materials. Moreover, they can be prepared as crystallized thin films by spin‐coating. These new 3D materials appear very promising for optoelectronic applications, not only because of their reduced lead content, but also in account of the large flexibility of their chemical composition through potential substitutions of MA⁺, HEA⁺, Pb²⁺ and I⁻ ions.     

A thioacetamide additive-based hybrid (MA0.5FA0.5)PbI3 perovskite solar cells crossing 21 % efficiency with excellent long term stability

An additive in hybrid perovskite is playing a vital role in the increment of power conversion efficiency (PCE), stability, and reproducibility of perovskite solar cells (PVSCs). Although, single-phase α-FAPbI₃ perovskite has an ideal band gap but is continuously transforming to δ–FAPbI₃, which is non-photoactive. Here, we controlled the methylammonium (MA) and formamidinium (FA) ratio in the (MA_xFA_1-x)PbI₃ perovskite composition and tuned its morphology with the help of the thioacetamide (TAA) Lewis base additive. The optimum MA:FA ratio and fine-tuning of TAA additive result in a highly crystalline, large grain size and smooth surface of the (MA_0.5FA_0.5)PbI₃ perovskite film. These highly uniform thin films with 850 nm grain size offered a superior interaction between the perovskite material and the electron transport layer (ETL) and a longer lifetime yielding a high PCE. The (MA_0.5FA_0.5)PbI₃+1% TAA-based champion device exhibited the highest PCE of 21.29% for a small area (0.09 cm²) and 18.32% PCE for a large area (1 cm²). The TAA-assisted devices exhibited high stability with >85% retention over 500 h. These results suggest that the (MA_0.5FA_0.5)PbI₃ along with the 1% TAA additive is a promising absorber layer that can produce >21% PCE.     

Methylammonium‐Mediated Evolution of Mixed‐Organic‐Cation Perovskite Thin Films: A Dynamic Composition‐Tuning Process

Methylammonium‐mediated phase‐evolution behavior of FA_1−xMA_xPbI₃ mixed‐organic‐cation perovskite (MOCP) is studied. It is found that by simply enriching the MOCP precursor solutions with excess methylammonium cations, the MOCPs form via a dynamic composition‐tuning process that is key to obtaining MOCP thin films with superior properties. This simple chemical approach addresses several key challenges, such as control over phase purity, uniformity, grain size, composition, etc., associated with the solution‐growth of MOCP thin films with targeted compositions.     

Lead‐Free Silver‐Bismuth Halide Double Perovskite Nanocrystals

Lead‐free perovskite nanocrystals (NCs) were obtained mainly by substituting a Pb²⁺ cation with a divalent cation or substituting three Pb²⁺ cations with two trivalent cations. The substitution of two Pb²⁺ cations with one monovalent Ag⁺ and one trivalent Bi³⁺ cations was used to synthesize Cs₂AgBiX₆ (X=Cl, Br, I) double perovskite NCs. Using femtosecond transient absorption spectroscopy, the charge carrier relaxation mechanism was elucidated in the double perovskite NCs. The Cs₂AgBiBr₆ NCs exhibit ultrafast hot‐carrier cooling (<1 ps), which competes with the carrier trapping processes (mainly originate from the surface defects). Notably, the photoluminescence can be increased by 100 times with surfactant (oleic acid) added to passivate the defects in Cs₂AgBiCl₆ NCs. These results suggest that the double perovskite NCs could be potential materials for optoelectronic applications by better controlling the surface defects.     

Stabilization of Highly Efficient and Stable Phase-Pure FAPbI3 Perovskite Solar Cells by Molecularly Tailored 2D-Overlayers

As a result of their attractive optoelectronic properties, metal halide APbI₃ perovskites employing formamidinium (FA⁺) as the A cation are the focus of research. The superior chemical and thermal stability of FA⁺ cations makes α-FAPbI₃ more suitable for solar-cell applications than methylammonium lead iodide (MAPbI₃). However, its spontaneous conversion into the yellow non-perovskite phase (δ-FAPbI₃) under ambient conditions poses a serious challenge for practical applications. Herein, we report on the stabilization of the desired α-FAPbI₃ perovskite phase by protecting it with a two-dimensional (2D) IBA₂FAPb₂I₇ (IBA=iso-butylammonium overlayer, formed via stepwise annealing. The α-FAPbI₃/IBA₂FAPb₂I₇ based perovskite solar cell (PSC) reached a high power conversion efficiency (PCE) of close to 23 %. In addition, it showed excellent operational stability, retaining around 85 % of its initial efficiency under severe combined heat and light stress, that is, simultaneous exposure with maximum power tracking to full simulated sunlight at 80 °C over 500 h.     

Preparation of a hybrid monolithic stationary phase with allylsulfonate for the rapid and simultaneous separation of cations in capillary ion chromatography

A hybrid monolithic column with sulfonate functionality was successfully prepared for the simultaneous separation of common inorganic cations in ion‐exchange chromatographic mode through a simple and easy single‐step preparation method. The strong cation‐exchange moieties were provided directly from allylsulfonate, which worked as an organic monomer in the single‐step reaction. Inorganic cations (Li⁺, Na⁺, K⁺, NH₄⁺, Cs⁺, Rb⁺, Mg²⁺, Ca²⁺, and Sr²⁺) were separated satisfactorily by using CuSO₄ as the eluent with indirect UV detection. The allysulfonate hybrid monolith showed a better performance in terms of speed and pressure drop than the capillary packed column. The number of theoretical plates achieved was 19 017 plates/m (in the case of NH₄⁺ as the analyte). The relative standard deviations (n = 6) of both retention time and peak height were less than 1.96% for all the analyte cations. The allysulfonate hybrid monolithic column was successfully applied for the rapid and simultaneous separation of inorganic cations in groundwater and the effluent of onsite domestic wastewater treatment system.     

Low‐Dimensional Dion–Jacobson‐Phase Lead‐Free Perovskites for High‐Performance Photovoltaics with Improved Stability

1,4‐butanediamine (BEA) is incorporated into FASnI₃ (FA=formamidinium) to develop a series of lead‐free low‐dimensional Dion–Jacobson‐phase perovskites, (BEA)FA_n?1Sn_nI_3n+1. The broadness of the (BEA)FA₂Sn₃I₁₀ band gap appears to be influenced by the structural distortion owing to high symmetry. The introduction of BEA ligand stabilizes the low‐dimensional perovskite structure (formation energy ca. 10⁶ j mol^?1), which inhibits the oxidation of Sn²⁺. The compact (BEA)FA₂Sn₃I₁₀ dominated film enables a weakened carrier localization mechanism with a charge transfer time of only 0.36 ps among the quantum wells, resulting in a carrier diffusion length over 450 nm for electrons and 340 nm for holes, respectively. Solar cell fabrication with (BEA)FA₂Sn₃I₁₀ delivers a power conversion efficiency (PCE) of 6.43 % with negligible hysteresis. The devices can retain over 90 % of their initial PCE after 1000 h without encapsulation under N₂ environment.