Defect Engineering Metal‐Free Polymeric Carbon Nitride Electrocatalyst for Effective Nitrogen Fixation under Ambient Conditions

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions provides an intriguing picture for the conversion of N₂ into NH₃. However, electrocatalytic NRR mainly relies on metal‐based catalysts, and it remains a grand challenge in enabling effective N₂ activation on metal‐free catalysts. Here we report a defect engineering strategy to realize effective NRR performance (NH₃ yield: 8.09 μg h^?1 mg^?1_cat., Faradaic efficiency: 11.59 %) on metal‐free polymeric carbon nitride (PCN) catalyst. Illustrated by density functional theory calculations, dinitrogen molecule can be chemisorbed on as‐engineered nitrogen vacancies of PCN through constructing a dinuclear end‐on bound structure for spatial electron transfer. Furthermore, the N?N bond length of adsorbed N₂ increases dramatically, which corresponds to “strong activation” system to reduce N₂ into NH₃. This work also highlights the significance of defect engineering for improving electrocatalysts with weak N₂ adsorption and activation ability.     

Generating Defect‐Rich Bismuth for Enhancing the Rate of Nitrogen Electroreduction to Ammonia

The electrochemical N₂ fixation, which is far from practical application in aqueous solution under ambient conditions, is extremely challenging and requires a rational design of electrocatalytic centers. We observed that bismuth (Bi) might be a promising candidate for this task because of its weak binding with H adatoms, which increases the selectivity and production rate. Furthermore, we successfully synthesized defect‐rich Bi nanoplates as an efficient noble‐metal‐free N₂ reduction electrocatalyst via a low‐temperature plasma bombardment approach. When exclusively using ¹H NMR measurements with N₂ gas as a quantitative testing method, the defect‐rich Bi(110) nanoplates achieved a ¹⁵NH₃ production rate of 5.453 μg mg_Bi^?1 h^?1 and a Faradaic efficiency of 11.68 % at ?0.6 V vs. RHE in aqueous solution at ambient conditions.     

Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation

NH₃ synthesis by the electrocatalytic N₂ reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method—the Haber–Bosch process—that requires high temperature and pressure. We report single Mo atoms anchored to nitrogen‐doped porous carbon as a cost‐effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH₃ yield rate (34.0±3.6 μg h^?1 mg_cat.^?1) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non‐precious‐metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single‐atom non‐precious‐metal catalysts for the electrocatalytic NRR.     

Greatly Improving Electrochemical N2 Reduction over TiO2 Nanoparticles by Iron Doping

Titanium‐based catalysts are needed to achieve electrocatalytic N₂ reduction to NH₃ with a large NH₃ yield and a high Faradaic efficiency (FE). One of the cheapest and most abundant metals on earth, iron, is an effective dopant for greatly improving the nitrogen reduction reaction (NRR) performance of TiO₂ nanoparticles in ambient N₂‐to‐NH₃ conversion. In 0.5 m LiClO₄, Fe‐doped TiO₂ catalyst attains a high FE of 25.6 % and a large NH₃ yield of 25.47 μg h^?1 mg_cat^?1 at ?0.40 V versus a reversible hydrogen electrode. This performance compares favorably to those of all previously reported titanium‐ and iron‐based NRR electrocatalysts in aqueous media. The catalytic mechanism is further probed with theoretical calculations.     

Nanoporous Palladium Hydride for Electrocatalytic N2 Reduction under Ambient Conditions

The electrocatalytic nitrogen reduction reaction (NRR) is an alternative eco‐friendly strategy for sustainable N₂ fixation with renewable energy. However, NRR suffers from sluggish kinetics owing to difficult N₂ adsorption and N≡N cleavage. Now, nanoporous palladium hydride is reported as electrocatalyst for electrochemical N₂ reduction under ambient conditions, achieving a high ammonia yield rate of 20.4 μg h^?1 mg^?1 with a Faradaic efficiency of 43.6 % at low overpotential of 150 mV. Isotopic hydrogen labeling studies suggest the involvement of lattice hydrogen atoms in the hydride as active hydrogen source. In situ Raman analysis and density functional theory (DFT) calculations further reveal the reduction of energy barrier for the rate‐limiting *N₂H formation step. The unique protonation mode of palladium hydride would provide a new insight on designing efficient and robust electrocatalysts for nitrogen fixation.     

Electrocatalysis of N2 to NH3 by HKUST‐1 with High NH3 Yield

Electrolytic ammonia synthesis from nitrogen at ambient conditions is appearing as a promising alternative to the Haber‐Bosch process which is consuming high energy and emitting CO₂. Here, a typical MOF material, HKUST‐1 (Cu?BTC, BTC=benzene‐1,3,5‐tricarboxylate), was selected as an electrocatalyst for the reaction of converting N₂ to NH₃ under ambient conditions. At ?0.75 V vs. reversible hydrogen electrode, it achieves excellent catalytic performance in the electrochemical synthesis of ammonia with high NH₃ yield (46.63 μg h^?1 mg^?1 _cat. or 4.66 μg h^?1 cm^?2) and good Faraday efficiency (2.45%). It is indicated that the good performance of the HKUST‐1 catalyst may originate from the formation of Cu(I). In addition, the catalyst also has good selectivity for N₂ to NH₃.     

ZIF‐Induced d‐Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d‐band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat^?1 h^?1 under ambient conditions. The strategy lowers electrocatalyst d‐band position to weaken H adsorption and concurrently creates electron‐deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44‐fold compared to without ZIF (ca. 1 %). The Pt/Au‐N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Electrocatalytically Active Fe‐(O‐C2)4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single‐atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single‐atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single‐atom electrocatalyst supported on low‐cost, nitrogen‐free lignocellulose‐derived carbon. The extended X‐ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe‐(O‐C₂)₄ coordination configuration. Density functional theory calculations identify Fe‐(O‐C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h^?1 mg_cat.^?1 (5350 μg h^?1 mg_Fe^?1) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h^?1 mg_cat.^?1 (51 283 μg h^?1 mg_Fe^?1) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.     

Ambient Electrosynthesis of Ammonia: Electrode Porosity and Composition Engineering

Ammonia, a key precursor for fertilizer production, convenient hydrogen carrier, and emerging clean fuel, plays a pivotal role in sustaining life on Earth. Currently, the main route for NH₃ synthesis is by the heterogeneous catalytic Haber–Bosch process (N₂+3 H₂→2 NH₃), which proceeds under extreme conditions of temperature and pressure with a very large carbon footprint. Herein we report that a pristine nitrogen‐doped nanoporous graphitic carbon membrane (NCM) can electrochemically convert N₂ into NH₃ in an acidic aqueous solution under ambient conditions. The Faradaic efficiency and rate of production of NH₃ on the NCM electrode reach 5.2 % and 0.08 g m^?2 h^?1, respectively. Functionalization of the NCM with Au nanoparticles dramatically enhances these performance metrics to 22 % and 0.36 g m^?2 h^?1, respectively. As this system offers the potential to be scaled to industrial levels it is highly likely that it might displace the century‐old Haber–Bosch process.     

DyF3: An Efficient Electrocatalyst for N2 Fixation to NH3 under Ambient Conditions

NH₃ synthesis by the Haber–Bosch method is regarded as the dominant method in industry. Such a process is energy‐intensive, accompanied by a large amount of CO₂ emission. Electrocatalytic N₂ reduction is a sustainable avenue for NH₃ production at ambient conditions. However, it needs a catalyst to boost the N₂ reduction reaction. Here, we demonstrate that DyF₃ is an efficient electrocatalyst. In 0.1 m Na₂SO₄, DyF₃ attains a large NH₃ yield of 10.9 μg h^?1 mg^?1_cat. at ?0.45 V vs. the reversible hydrogen electrode, with the corresponding Faradaic efficiency of 8.8 %. Furthermore, this catalyst exhibits high electrochemical stability.     

Facile Synthesis of Stable MO2N Nanobelts with High Catalytic Activity for Ammonia Decomposition

In the present work, high quality γ‐Mo₂N catalysts for ammonia decomposition were successfully synthesized via temperature programmed nitridation of α‐MoO₃ nanobelts. The optimal conditions for the synthesis of MoO₃ precursors were obtained by using the orthogonal experimental method. The MoO₃ precursors and the corresponding fresh and used Mo₂N catalysts were characterized by various characterization techniques, including transmission electron microscopy, X‐ray diffraction and N₂ adsorption‐desorption. Furthermore, temperature‐ programmed desorption by N₂ or NH₃ and X‐ray photoelectron spectroscopy analysis were performed to better understand the chemical properties of Mo₂N catalysts. The results revealed that Mo₂N catalyst has good NH₃ adsorption ability and facilitates the dissociation adsorption of N₂. Moreover, the morphology and structure of Mo₂N catalysts well maintained after the reaction. Therefore, among the three transition metal nitrides (Mo₂N, W₂N and VN) and some Mo‐based catalysts previously reported, Mo₂N catalysts showed very high activity and stability. Nearly 94% conversion of NH₃ could be reached at 550°C with the gas hourly space velocity of 22000 cm³?g_cat^–1?h^–1 and no obvious deactivation was observed during a 72 h test.     

A Heterogeneous Photocatalytic Hydrogen Evolution Dyad: [(tpy

The development of an artificial heterogeneous dyad by covalently anchoring a hydrogen‐evolving molecule catalyst to a semiconductor photosensitizer through a bridging ligand is highly challenging. Herein, we adopt the inorganic–organic hybrid CdS–DETA NSs (DETA=diethylenetriamine, NSs=nanosheets) as initial matrix to successfully construct an imine bond (‐CH=N‐) linked heterogeneous dyad [CdS?N=CH?Ni] through the condensation reaction between the amino groups of CdS–DETA and the aldehyde group of the water reduction molecular catalyst, [(tpy‐CHO)₂Ni]Cl₂ (tpy=terpyridine). The [CdS?N=CH?Ni] enables a turnover number (TON) of about 43 815 versus Ni catalysts and an initial turnover frequency (TOF) of approximately 0.47 s^?1 in 26 h under visible‐light irradiation (λ>420 nm). The apparent quantum yield (AQY) reaches (9.9±0.8) % at 420 nm. Under optical conditions, the [CdS?N=CH?Ni] can achieve a considerable amount of hydrogen production, 507.1±27 μmol H₂ for 6 h, which is 1.27 times that generated from the mechanically mixed system of CdS–DETA NSs and [(tpy‐CH=NR)₂Ni]Cl₂ ( III ) under otherwise identical conditions. Furthermore, its TON value based on Ni species is also higher than that of the mixed system of CdS–DETA and III .     

Single-Atom Catalysis Using Chromium Embedded in Divacant Graphene for Conversion of Dinitrogen to Ammonia

Reduction of dinitrogen to ammonia under ambient conditions is a long-standing challenge. The few metal-based catalysts proposed have conspicuous disadvantages such as high cost, high energy consumption, and being hazardous to the environment. Single-atom catalysis has emerged as a new frontier in heterogeneous catalysis and metal atoms atomically dispersed on supports receive more and more attention owing to rapid advances in synthetic methodologies and computational modeling. Herein, we propose metal atoms embedded in divacant graphene as a catalyst for N₂ fixation based on density functional calculations. We systematically investigate the potential of using transition metal like Cr, Mn, Fe, Mo and Ru as catalysts and our study reveals that Cr embedded in graphene exhibit good catalytic activity for N₂ fixation. The synergy between the metal atoms and graphene surface provides a stable support to the metal center that has a high spin density to promote adsorption of N₂ and activation of its N≡N triple bond. Our study deciphers the mechanism of conversion of N₂ to ammonia following two possible reaction pathways, distal and enzymatic routes, via sequential protonation and reduction of activated N₂. The study provides a rational framework for conversion of dinitrogen to ammonia using single atom catalyst.     

Tuning the Electron Localization of Gold Enables the Control of Nitrogen‐to‐Ammonia Fixation

The (photo)electrochemical N₂ reduction reaction (NRR) provides a favorable avenue for the production of NH₃ using renewable energy in mild operating conditions. Understanding and building an efficient catalyst with high NH₃ selectivity represents an area of intense interest for the early stages of development for NRR. Herein, we introduce a CoO_x layer to tune the local electronic structure of Au nanoparticles with positive valence sites for boosting conversion of N₂ to NH₃. The catalysts, possessing high average oxidation states (ca. 40 %), achieve a high NH₃ yield rate of 15.1 μg cm^?2 h^?1 and a good faradic efficiency of 19 % at ?0.5 V versus reversible hydrogen electrode. Experimental results and simulations reveal that the ability to tune the oxidation state of Au enables the control of N₂ adsorption and the concomitant energy barrier of NRR. Altering the Au oxidation state provides a unique strategy for control of NRR in the production of valuable NH₃.     

MoB/g‐C3N4 Interface Materials as a Schottky Catalyst to Boost Hydrogen Evolution

Proton adsorption on metallic catalysts is a prerequisite for efficient hydrogen evolution reaction (HER). However, tuning proton adsorption without perturbing metallicity remains a challenge. A Schottky catalyst based on metal–semiconductor junction principles is presented. With metallic MoB, the introduction of n‐type semiconductive g‐C₃N₄ induces a vigorous charge transfer across the MoB/g‐C₃N₄ Schottky junction, and increases the local electron density in MoB surface, confirmed by multiple spectroscopic techniques. This Schottky catalyst exhibits a superior HER activity with a low Tafel slope of 46 mV dec^?1 and a high exchange current density of 17 μA cm^?2, which is far better than that of pristine MoB. First‐principle calculations reveal that the Schottky contact dramatically lowers the kinetic barriers of both proton adsorption and reduction coordinates, therefore benefiting surface hydrogen generation.     

Regulation of Coordination Number over Single Co Sites: Triggering the Efficient Electroreduction of CO2

The design of active, selective, and stable CO₂ reduction electrocatalysts is still challenging. A series of atomically dispersed Co catalysts with different nitrogen coordination numbers were prepared and their CO₂ electroreduction catalytic performance was explored. The best catalyst, atomically dispersed Co with two‐coordinate nitrogen atoms, achieves both high selectivity and superior activity with 94 % CO formation Faradaic efficiency and a current density of 18.1 mA cm^?2 at an overpotential of 520 mV. The CO formation turnover frequency reaches a record value of 18 200 h^?1, surpassing most reported metal‐based catalysts under comparable conditions. Our experimental and theoretical results demonstrate that lower a coordination number facilitates activation of CO₂ to the CO₂^.? intermediate and hence enhances CO₂ electroreduction activity.     

Pothole‐rich Ultrathin WO3 Nanosheets that Trigger N≡N Bond Activation of Nitrogen for Direct Nitrate Photosynthesis

Nitrate is a raw ingredient for the production of fertilizer, gunpowder, and explosives. Developing an alternative approach to activate the N≡N bond of naturally abundant nitrogen to form nitrate under ambient conditions will be of importance. Herein, pothole‐rich WO₃ was used to catalyse the activation of N≡N covalent triple bonds for the direct nitrate synthesis at room temperature. The pothole‐rich structure endues the WO₃ nanosheet more dangling bonds and more easily excited high momentum electrons, which overcome the two major bottlenecks in N≡N bond activation, that is, poor binding of N₂ to catalytic materials and the high energy involved in this reaction. The average rate of nitrate production is as high as 1.92 mg g^?1 h^?1 under ambient conditions, without any sacrificial agent or precious‐metal co‐catalysts. More generally, the concepts will initiate a new pathway for triggering inert catalytic reactions.     

Highly Dispersed and Small‐Sized Nickel(II) Hydroxide Co‐Catalyst Prepared by Photodeposition for Hydrogen Production

Photodeposition has been widely used as a mild and efficient synthetic method to deposit co‐catalysts. It is also worth studying how to synthesize non‐noble metal photocatalysts with uniform dispersion. Different synthetic conditions in photodeposition have a certain influence on particle size distribution and photocatalytic activity. Therefore, we designed experiments to prepare the inexpensive composite photocatalyst Ni(OH)₂/g‐C₃N₄ by photodeposition. The Ni(OH)₂ co‐catalysts disperse uniformly with particle sizes of about 10 nm. The photocatalytic hydrogen production rate of Ni(OH)₂/g‐C₃N₄ reached about 19 mmol g^?1 h^?1, with the Ni(OH)₂ deposition amount about 1.57 %. During 16 h stability testing, the rate of hydrogen production did not decrease significantly. The composite catalyst also revealed a good hydrogen production performance under sunlight. The Ni(OH)₂ co‐catalyst enhanced the separation ability of photogenerated carriers, which was proved by surface photovoltage and fluorescence analysis.     

Highly Effective Ru/BaCeO3 Catalysts on Supports with Strong Basic Sites for Ammonia Synthesis

BaCeO₃‐a and BaCeO₃‐b, with strong basic sites, were synthesized by using a co‐precipitation method at different calcination temperatures, and used as supports to evaluate their performance in ammonia synthesis. The ammonia synthesis rate with the 1.25 % Ru/BaCeO₃‐a catalyst is 24 mmol g^?1 h^?1, which is higher than that of 1.25 % Ru/BaCeO₃‐b catalyst (18 mmol g^?1 h^?1) at 3 MPa and 450 °C. Moreover, the performance of the 4 % Cs‐1.25 % Ru/BaCeO₃‐a catalyst was further improved to 28 mmol g^?1 h^?1, and no sign of deactivation was observed after a reaction time of 120 h. The XPS and H₂ temperature‐programmed reduction analyses indicated that the Ru/BaCeO₃‐a catalyst has more oxygen vacancies than the Ru/BaCeO₃‐b catalyst. In addition, the average Ru particle size of the Ru/BaCeO₃‐a catalyst is closer to 2 nm than the Ru/BaCeO₃‐b catalyst, which promotes the generation of B₅‐type sites (the active site for N₂ dissociation). The CO₂ temperature‐programmed desorption analysis indicates that BaCeO₃‐a has a high basic density, which is beneficial for electron transfer to Ru and further facilitates the dissociation of N≡N bonds.