Metal‐Free Oxidation of α‐Hydroxy Ketones to 1,2‐Diketones Catalyzed by Mesoporous Carbon Nitride with Visible Light

As a photocatalyst, mesoporous carbon nitride (mpg‐C₃N₄) shows higher photocatalytic activities in organic synthesis. Herein we report an mpg‐C₃N₄‐catalyzed oxidation of α‐hydroxy ketones to synthesize 1,2‐diketones using visible light. This transformation represents a green and highly efficient synthetic route to synthesize 1,2‐diketones for which catalytic approaches are scarce.     

Direct Observation of Dynamic Bond Evolution in Single‐Atom Pt/C3N4 Catalysts

Single‐atom catalysts are promising platforms for heterogeneous catalysis, especially for clean energy conversion, storage, and utilization. Although great efforts have been made to examine the bonding and oxidation state of single‐atom catalysts before and/or after catalytic reactions, when information about dynamic evolution is not sufficient, the underlying mechanisms are often overlooked. Herein, we report the direct observation of the charge transfer and bond evolution of a single‐atom Pt/C₃N₄ catalyst in photocatalytic water splitting by synchronous illumination X‐ray photoelectron spectroscopy. Specifically, under light excitation, we observed Pt?N bond cleavage to form a Pt⁰ species and the corresponding C=N bond reconstruction; these features could not be detected on the metallic platinum‐decorated C₃N₄ catalyst. As expected, H₂ production activity (14.7 mmol h^?1 g^?1) was enhanced significantly with the single‐atom Pt/C₃N₄ catalyst as compared to metallic Pt‐C₃N₄ (0.74 mmol h^?1 g^?1).     

In situ Alkylation of 4,4′‐Vinylenedipyridine for Inorganic‐Organic Iodides/Iodidomercurates

Solvothermal reactions of HgI₂, 4,4′‐vinylenedipyridine, and HI in alcoholic solution (methanol, ethanol, or pentanol) gave rise to a family of organic‐inorganic hybrid complexes, formulated as [C₁₄H₁₆N₂][I₄]^2– ( 1 ), [C₁₆H₂₀N₂][HgI₄] ( 2 ), and [C₂₂H₃₂N₂][HgI₄]₄ ( 3 ). Single‐crystal X‐ray diffraction reveals that all three compounds are discrete structures, including the inorganic anion [I₄]^2– or [HgI₄]^2– and an organic cation, where the resulting organic cations were generated in situ alkylation reactions of 4,4′‐vinylenedipyridine with alcohols, with cleavage of the alcoholic C–O bond followed by a one‐step in situ N‐alkylation reaction of 4,4′‐vinylenedipyridine in acidic HI solution. X‐ray powder diffraction (XRD), ¹H NMR and ¹³C NMR, energy‐dispersive X‐ray (EDS), IR, as well as UV/Vis/NIR spectroscopy, elemental analysis, and thermogravimetric analysis (TGA) were used to characterize the complexes.     

Orthopalladated complexes of phosphorus ylide: Poly(N‐vinyl‐2‐pyrrolidone)‐stabilized palladium nanoparticles as reusable heterogeneous catalyst for Suzuki and Heck cross‐coupling reactions

The phosphorus ylide [Ph₃PCHC(O)C₆H₄‐NO₂–4] reacted with Pd(OAc)₂ to give the C,C‐orthometallated complex [Pd{κ²(C,C)‐C₆H₄PPh₂C(H)CO(C₆H₄‐NO₂–4)}(μ‐OAc)]₂, which underwent bridge exchange reaction with NaN₃, NaCl, KBr and KI, respectively, to afford the binuclear C,C‐orthopalladated complexes [Pd{κ²(C,C)‐C₆H₄PPh₂C(H)CO(C₆H₄‐NO₂–4)}(μ‐X)]₂ (X = N₃ ( 1 ), Cl ( 2 ), Br ( 3 ) and I ( 4 )). The complexes were identified using spectroscopy (infrared and NMR), CHNS technique and single‐crystal X‐ray structure analysis. Thereafter, palladium nanoparticles with narrow size distribution were easily prepared using the refluxing reaction of iodo‐bridged orthopalladated complex 4 with poly(N ‐vinyl‐2‐pyrrolidone) (PVP) as the protecting group. The PVP‐stabilized palladium nanoparticles were characterized using a variety of techniques including X‐ray diffraction, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy, inductively coupled plasma analysis and Fourier transform infrared spectroscopy. The catalytic activity of the PVP‐stabilized palladium nanoparticles was evaluated in the Suzuki reaction of phenylboronic acid and the Heck reaction of styrene with aryl halides of varying electron densities. This catalyst exhibited excellent catalytic activity for Suzuki cross‐coupling reactions in ethanol–water. Notably, aryl chlorides which are cheaper and more accessible than their bromide and iodide counterparts also reacted satisfactorily using this catalyst. After completion of reactions, the catalyst could be separated using a simple method and used many times in repeat cycles without considerable loss in its activity.     

Magnetically separable g‐C3N4 hybrid nanocomposite: Highly efficient and eco‐friendly recyclable catalyst for one‐pot synthesis of α‐aminonitriles

A magnetically separable graphitic carbon nitride nanocomposite (Fe₃O₄/g‐C₃N₄) as a catalyst for the three‐component condensation reactions of carbonyl compounds, amines and trimethylsilylcyanide was thoroughly investigated. The reaction of these three components was found to be efficient, economical and green and took place in the presence of a catalytic amount of the magnetically separable catalyst to yield the corresponding α‐aminonitriles in good to excellent yields. The prepared nanocomposite was characterized using scanning electron microscopy and energy‐dispersive X‐ray and Fourier transform infrared spectroscopies. The nanocomposite was also found to be reusable could be recovered easily and reused several times without distinct deterioration in its catalytic activity.     

Tetracycline Removal Under Solar Illumination Over Ag3VO4/mpg‐C3N4 Heterojunction Photocatalysts

Ag₃VO₄/mpg‐C₃N₄ (mesoporous graphitic carbon nitride) heterojunction photocatalysts were prepared by anchoring tiny Ag₃VO₄ particles on the nanosheet of mpg‐C₃N₄. The prepared Ag₃VO₄/mpg‐C₃N₄ heterojunctions were used to remove tetracycline (TC), a kind of antibiotics widely released into the aquatic environment under solar irradiation. Compared with pure mpg‐C₃N₄ and Ag₃VO₄, Ag₃VO₄/mpg‐C₃N₄ displayed much higher photocatalytic activity (83.2% removal rate within 90 min under visible‐light irradiation). Importantly, no apparent deactivation was observed for Ag₃VO₄/mpg‐C₃N₄‐40 after five cycles, inferring a good reusability. As confirmed by photocurrent measurement and photoluminescence spectra, the excellent photocatalytic property of Ag₃VO₄/mpg‐C₃N₄ was credit to the electron–hole separation enhancement at the formed heterojunction of two semiconductors. In addition, a possible mechanism and intermediate products for the Ag₃VO₄/mpg‐C₃N₄ photocatalysts toward the photodegradation of TC in aqueous solution under artificial sunlight radiation were proposed based on the scavengers trapping test, ESR spectra and a high‐performance liquid chromatography (HPLC) coupled with mass spectrometer (MS) analysis. This investigation provides a low cost, green and easily practical approach to remove the antibiotics in the aquatic environment.     

HPW/PDMAEMA‐b‐PMAA/ZIF‐8 Ternary Lamellar Composite and the Photocatalytic Degradation of Methylene Blue

PDMAEMA‐b‐PMAA block copolymers were prepared by the sequential RAFT polymerization of DMAEMA and tBMA, followed by hydrolysis. Phosphotungstic acid (HPW) was anchored to the PDMAEMA blocks through electrostatic interactions and the as‐obtained HPW/PDMAEMA‐b‐PMAA was added to the synthesis of ZIF‐8. During the formation of ZIF‐8, the PMAA blocks coordinated to the Zn²⁺ ions through their carboxy groups, along with the HPW groups that were anchored to the PDMAEMA blocks. In this way, the block copolymer could consolidate the interactions between HPW and ZIF‐8 and prevent the leakage of HPW. Finally, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite was obtained and the structure of the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 hybrid material was characterized by using powder X‐ray diffraction (PXRD), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). As a photocatalyst, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite showed excellent photoactivity for the degradation of methylene blue (MB). The rate of degradation of MB was 0.0240 min^?1, which was 7.5‐times higher than that of commercially available P25 (0.0032 min^?1). In the presence of H₂O₂, the kinetic degradation parameters of the composite reached 0.0634 min^?1, which was about 19.8‐times higher than that of P25.     

H3PMo12O40‐immobilized chitosan/Co3O4: A novel and recyclable nanocomposite for the synthesis of pyrimidinedione derivatives

An efficient three‐component reaction of aromatic aldehydes, 6‐aminouracil/6‐amino‐1,3‐dimethyluracil and 4‐hydroxycoumarin in the presence of a novel heterogeneous catalyst H₃PMo₁₂O₄₀‐immobilized Co₃O₄/chitosan led to a synthesis of a new class of pyrimidinedione derivatives under reflux conditions. The magnetically recoverable nanocomposite of Co₃O₄/chitosan/H₃PMo₁₂O₄₀ was fully characterized by Fourier transform‐infrared spectrophotometry, scanning electron microscopy, X‐ray powder diffraction, energy‐dispersive X‐ray spectroscopy, vibrating‐sample magnetometry and N₂ adsorption–desorption by Brunauer–Emmett–Teller analysis. Results show that Keggin‐type 12‐molybdophosphoric acid immobilized into the network of the cross‐linked chitosan with super‐paramagnetic Co₃O₄ nanoparticles. The present method offers several advantages, such as simple procedure, short reaction times and excellent yields of products. The novelty of the catalyst, high catalytic activity, easy separation from the reaction with an external magnetic field and reusability of the catalyst in six consecutive runs are additional eco‐friendly attributes of this catalytic system.     

Copper(I) complex of 1,3‐DimethylBarbituric acid modified SBA‐15 and its catalytic role for the synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones and Imidazoles

An efficient one‐pot method for synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and tri/tetra substituted‐1H‐imidazoles has been accomplished in the presence of catalytic amounts of Cu(I)‐1,3‐dimethylbarbituric acid modified SBA‐15 as heterogeneous catalyst with good to excellent yields. The catalyst is reusable and can be applied several times without any decrease in product yield. The synthesized catalyst was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDS), thermal gravimetric analysis (TGA), N₂ adsorption/desorption isotherms (BET), Fourier transform infrared spectroscopy (FT‐IR) and atomic absorption spectroscopy (AAS).     

A novel dinuclear bismuth(III) coordination compound: bis(μ‐pyridine‐2,6‐dicarboxylato)‐κ4O2,N,O6:O6′;κ4O2:O2′,N,O6‐bis[(azido‐κN)(1,10‐phenanthroline‐κ2N,N′)bismuth(III)] tetrahydrate

A novel dinuclear bismuth(III) coordination compound, [Bi₂(C₇H₃NO₄)₂(N₃)₂(C₁₂H₈N₂)₂]·4H₂O, has been synthesized by an ionothermal method and characterized by elemental analysis, energy‐dispersive X‐ray spectroscopy, IR, X‐ray photoelectron spectroscopy and single‐crystal X‐ray diffraction. The molecular structure consists of one centrosymmetric dinuclear neutral fragment and four water molecules. Within the dinuclear fragment, each Bi^III centre is seven‐coordinated by three O atoms and four N atoms. The coordination geometry of each Bi^III atom is distorted pentagonal–bipyramidal (BiO₃N₄), with one azide N atom and one bridging carboxylate O atom located in axial positions. The carboxylate O atoms and water molecules are assembled via O—H...O hydrogen bonds, resulting in the formation of a three‐dimensional supramolecular structure. Two types of π–π stacking interactions are found, with centroid‐to‐centroid distances of 3.461 (4) and 3.641 (4) Å.     

Highly efficient oxidative cleavage of alkenes and cyanosilylation of aldehydes catalysed by magnetically recoverable MIL‐101

The catalytic activity of magnetically recoverable MIL‐101 was investigated in the oxidation of alkenes to carboxylic acids and cyanosilylation of aldehydes. MIL‐101 was treated with Fe₃O₄ and the prepared catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, N₂ adsorption measurements, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and inductively coupled plasma analysis. The catalytic active sites in this heterogeneous catalyst are Cr³⁺ nodes of the MIL‐101 framework. This heterogeneous catalyst has the advantages of excellent yields, short reaction times and reusability several times without significant decrease in its initial activity and stability in both oxidation and cyanosilylation reactions. Its magnetic property allows its easy separation using an external magnetic field.     

Cu(II) immobilized on Fe3O4–diethylenetriamine: A new magnetically recoverable catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and oxidative coupling of thiols

Cu(II) immobilized on Fe₃O₄–diethylenetriamine was designed as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H )‐ones and the oxidative coupling of thiols. The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and atomic absorption spectroscopy. Simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst with unaltered activity make our protocol a green and feasible synthetic strategy.     

A novel ternary GO@SiO2‐HPW nanocomposite as an efficient heterogeneous catalyst for the synthesis of benzazoles in aqueous media

A new solid acid catalyst, consisting of 12‐phosphotungstic heteropoly acid (HPW) supported on graphene oxide/silica nanocomposite (GO@SiO₂), has been developed via immobilizing HPW onto an amine‐functionalized GO/SiO₂ surface through coordination interaction (GO@SiO₂‐HPW). The GO@SiO₂‐HPW nanocomposite was characterized by Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD). The prepared nanocomposite could be dispersed homogeneously in water and further used as a heterogeneous, reusable, and efficient catalyst for the synthesis of benzimidazoles and benzothiazoles by the reaction of 1,2‐phenelynediamine or 2‐aminothiophenol with different aldehydes.     

4,5‐Di­hydro‐3‐methyl‐5‐(4‐methyl­phenyl)‐1H‐pyrazole‐1‐carboxamidinium acetate acetone hemisolvate

The X‐ray structure analysis of the unexpected product of the reaction between 4‐(4‐methyl­phenyl)­but‐3‐en‐2‐one and amino­guanidine revealed the title compound, C₁₂H₁₇N₄⁺·C₂H₃O₂^?·0.5C₃H₆O, consisting of a protonated amidine moiety joined to a substituted pyrazoline ring at the N1 atom. The amidine group is protonated and the positive charge is delocalized over the three C—N bonds in a similar manner to that found in guanidinium salts. The amidinium moiety of the cation is linked to the acetate anions through four N—H?O hydrogen bonds, with N?O distances of 2.749 (4), 2.848 (4), 2.904 (4) and 2.911 (4) Å. The pyrazoline ring adopts a flattened envelope conformation and the substituted phenyl ring is oriented perpendicular to the attached heterocycle. The acetone solvate molecule lies across a twofold rotation axis.     

Magnetic Fe3O4 nanoparticles supported imine/Thiophene‐nickel (II) complex: A new and highly active heterogeneous catalyst for the synthesis of polyhydroquinolines and 2, 3‐dihydroquinazoline‐4(1H)‐ones

A new magnetically separable nickel catalyst (Ni(NO₃)_2?Imine/Thiophene‐Fe₃O₄@SiO₂) was readily prepared and structurally characterized by Fourier transform infrared spectroscopy (FT‐IR), Scanning electron microscopy (SEM), Energy‐dispersive X‐ray spectroscopy (EDX), Vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD) and Atomic absorption spectroscopy (AAS). The Ni(NO₃)_2?Imine/Thiophene‐Fe₃O₄@SiO₂ exhibited efficient catalytic activity in the synthesis of 2,3‐dihydroquinazoline‐4(1H)‐ones and polyhydroquinolines. Catalysis research under water and solvent‐free conditions makes also this synthetic protocol ideal and fascinating from the environmental point of view. The catalyst can be magnetically recovered after the reaction and can be reused for many times without appreciable decrease in activity.     

Solvent‐free synthesis of propargylamines catalyzed by an efficient recyclable ZnO‐supported CuO/Al2O3 nanocatalyst

An efficient nanocatalyst of ZnO‐supported CuO/Al₂O₃ (CuO/ZnO/Al₂O₃ nanocatalyst) was prepared by the co‐precipitation method and characterized by scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray powder diffraction and Brunauer–Emmett–Teller surface area analysis. CuO/ZnO/Al₂O₃ nanocatalyst proved to be a very efficient catalyst on the synthesis of propargylamines under solvent‐free conditions in high yields. Moreover, the catalyst can be recyclable without reducing catalytic activity up to five times.     

Impregnated copper ferrite on mesoporous graphitic carbon nitride: An efficient and reusable catalyst for promoting ligand‐free click synthesis of diverse 1,2,3‐triazoles and tetrazoles

Magnetic CuFe₂O₄/g‐C₃N₄ hybrids were synthesized through a facile method and their catalytic performances were evaluated in click chemistry for the first time. The structural and morphological characterization of prepared materials was carried out by different techniques such as X‐ray diffraction, high‐resolution transmission electron microscopy, field emission scanning electron microscopy, Fourier infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, and N₂ adsorption–desorption analysis (Brunauer–Emmett–Teller surface area). The utilization of magnetic CuFe₂O₄/g‐C₃N₄ enabled superior performance in the one‐pot azide–alkyne cycloaddition reaction in water using alkyl halides and epoxides as azide precursors without the need of any additional agents. The present system is broad in scope and especially practical for the synthesis of macrocyclic triazoles and also tetrazoles. In addition, the catalytic system highly fulfills the demands of “green click chemistry” with its convenient conditions, especially easy access to a variety of significant products in low catalyst loading and simple work‐up and isolation procedure.     

Nickel−Copper bimetallic mesoporous nanoparticles: As an efficient heterogeneous catalyst for N‐alkylation of amines with alcohols

A bimetallic catalyst (Ni/Cu‐MCM‐41) is prepared via co‐condensation method. The latter is characterized by Fourier transform infrared (FT‐IR), X‐ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), diffuse reflectance spectroscopy (DRS), and nitrogen adsorption–desorption analysis. Catalytic performance of Ni/Cu‐MCM‐41 is probed in N‐alkylation of amines with alcohols through a hydrogen autotransfer process. Noteworthy, this catalytic system appears very efficient for synthesis of a range of secondary and tertiary amines in good to excellent isolated yields. Moreover, the catalyst is successfully recovered and reused four times without notable decrease in its activity.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

Green,cost‐effective and efficient procedure for Heck and Sonogashira coupling reactions using palladium nanoparticles supported on functionalized Fe3O4@SiO2 by polyvinyl alcohol as a highly active,durable and reusable catalyst

A novel heterogenized organometallic catalyst was synthesized by coordinating palladium with polyvinyl alcohol‐functionalized Fe₃O₄@SiO₂ nanospheres. This novel catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscope, field emission scanning electron microscope, dynamic light scattering, UV–vis spectroscopy, X‐ray photoelectron spectroscopy, energy dispersive X‐ray analysis, thermogravimetric analysis and inductively coupled plasma analysis. The prepared palladium nanoparticles supported on polyvinyl alcohol functionalized Fe₃O₄@SiO₂ nanoparticles were successfully applied as a magnetically recyclable catalyst in Heck and Sonogashira coupling reactions in water. They showed remarkable activity toward aryl halides (I, Br, Cl) using very low palladium loading in excellent yields and demonstrated high TONs (mmol of product per mmol of catalyst). Also, the catalyst could be magnetically separated and reused seven times without any appreciable loss of catalytic activity.