Free‐Standing CoO‐POM Janus‐like Ultrathin Nanosheets

A single‐step solution‐based strategy is used to obtain 2D Janus‐like free‐standing ultrathin nanosheets build from two structurally unrelated species, that is, polyoxomolybdate (POM) and CoO. A controlled 2D‐to‐1D morphological transition was achieved by judiciously adjusting the solvent choice. These POM‐CoO heterostructures can behave as an ideal catalyst for the epoxidation of styrene. Benefiting from their amphiphilic nature, these 2D POM‐CoO nanosheets have also been used as surfactant to emulsify immiscible solvents. It is anticipated that structurally diverse polyoxometalates will offer promise as design elements for variety of structurally and compositionally tunable van der Waals integrated heteromaterials having a broad range applications.     

Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

Light‐induced self‐thermophoresis of Janus spheroidal nanoparticles

A theoretical framework is provided for determining the self‐thermophoretic velocity of a light irradiated spheroidal Janus nanoparticle consisting of symmetric dielectric and perfectly conducting semi‐spheroids. The analysis is based on solving the linearized Joule heating problem due to uniform laser irradiance and on explicitly determining the temperature fields inside and outside the particle. We employ the thermoelectric (Peltier‐ Seebeck) methodology to find the surface self ‐ induced temperature gradient and the related slip velocity which determines the autonomous phoretic (self ‐ propulsion) mobility of the Janus particle. Simplified explicit expressions for the self ‐ thermophoretic velocities of spheroidal (prolate and oblate) Janus particles in terms of their aspect ratios are found and few practical limiting cases (i.e., sphere, disk and needle) are also discussed.     

Self‐Assembly of MXene‐Surfactants at Liquid–Liquid Interfaces: From Structured Liquids to 3D Aerogels

2D transition metal carbides and nitrides (MXenes), a class of emerging nanomaterials with intriguing properties, have attracted significant attention in recent years. However, owing to the highly hydrophilic nature of MXene nanosheets, assembly strategies of MXene at liquid–liquid interfaces have been very limited and challenging. Herein, through the cooperative assembly of MXene and amine‐functionalized polyhedral oligomeric silsesquioxane at the oil–water interface, we report the formation, assembly, and jamming of a new type MXene‐based Janus‐like nanoparticle surfactants, termed MXene‐surfactants (MXSs), which can significantly enhance the interfacial activity of MXene nanosheets. More importantly, this simple assembly strategy opens a new platform for the fabrication of functional MXene assemblies from mesoscale (e.g., structured liquids) to macroscale (e.g., aerogels), that can be used for a range of applications, including nanocomposites, electronic devices, and all‐liquid microfluidic devices.     

Spacer‐Modulated Differentiation Between Self‐Assembly and Folding Pathways for Bichromophoric Merocyanine Dyes

We have synthesized a large series of bis(merocyanine) dyes with varying spacer unit and investigated in detail their self‐organization behavior by concentration‐ as well as solvent‐dependent UV/Vis spectroscopy. Our in‐depth studies have shown that the self‐organization of the present bis(merocyanine) dyes is subtly influenced by the nature of the spacer unit. The utilization of rigid spacers results in the formation of self‐associated bimolecular complexes with high binding strength, while flexible spacers drive the respective bichromophoric dyes to intramolecular folding. Our thorough investigations on the impact of alkyl spacer chain length on the folding tendency of the present series of bis(merocyanine) dyes revealed a biphasic behavior, that is, a steep increase of the folding tendency for the dyes containing C4 to C7 chains and then a gentle decrease for dyes with longer alkyl spacer chains as evidenced by free energy (ΔG) values for the folding of these dyes. Furthermore, analyses of aggregates’ optical properties based on exciton theory as well as quantum chemical calculations suggest a bimolecular aggregate structure for the dye possessing a rigid spacer and a rotationally twisted pleated structure for the bis(merocyanine) dyes having spacer units with less than seven carbon atoms, while the application of longer alkyl chain linkers (≥C7) provides enough flexibility to orient the chromophores in electrostatically most favored antiparallel fashion.     

Polydiacetylene‐Tb3+ Nanosheets of Which Both the Color and the Fluorescence Can Be Reversibly Switched between Two Colors

Polydiacetylenes (PDAs), an organic layered compound, show a series of intriguing properties, such as thermochromism and fluorescence emission in the red‐phase. However, their irreversible color change, and weak and single‐color fluorescence emitted only from the red‐phase PDAs, have limited their applications. Herein, we report double‐reversible PDA‐Tb³⁺ nanosheets of which both the color and the fluorescence can be reversibly switched between two colors. PDA‐Tb³⁺ nanosheets have the nearly defect‐free intercalated structure in which a layer of Tb³⁺ ions was intercalated in between each two PDA bilayers to tether almost all of the carboxyl groups at the end of the side chains of the PDA. When the PDA is in the blue phase, the PDA‐Tb³⁺ nanosheets emit the green fluorescence of Tb³⁺ ions. When the PDA is in the red phase, the Tb³⁺ fluorescence disappears while the intrinsic red fluorescence of PDA is effectively enhanced through the fluorescence resonance energy transfer (FRET) process; the PDA‐Tb³⁺ nanosheets emit stronger red fluorescence compared with the PDA in red phase. Moreover, the tethering of almost all of the carboxyl groups at the end of the side chains of the PDA endows the nanosheets with the double reversibility in both the color and fluorescence transitions.     

Transition‐Metal‐Ion‐Mediated Polymerization of Dopamine: Mussel‐Inspired Approach for the Facile Synthesis of Robust Transition‐Metal Nanoparticle–Graphene Hybrids

Inspired by the high transition‐metal‐ion content in mussel glues, and the cross‐linking and mechanical reinforcement effects of some transition‐metal ions in mussel threads, high concentrations of nickel(II), cobalt(II), and manganese(II) ions have been purposely introduced into the reaction system for dopamine polymerization. Kinetics studies were conducted for the Ni²⁺–dopamine system to investigate the polymerization mechanism. The results show that the Ni²⁺ ions could accelerate the assembly of dopamine oligomers in the polymerization process. Spectroscopic and electron microscopic studies reveal that the Ni²⁺ ions are chelated with polydopamine (PDA) units, forming homogeneous Ni²⁺–PDA complexes. This facile one‐pot approach is utilized to construct transition‐metal‐ion–PDA complex thin coatings on graphene oxide, which can be carbonized to produce robust hybrid nanosheets with well‐dispersed metallic nickel/metallic cobalt/manganese(II) oxide nanoparticles embedded in PDA‐derived thin graphitic carbon layers. The nickel–graphene hybrid prepared by using this approach shows good catalytic properties and recyclability for the reduction of p ‐ nitrophenol.     

Motion‐Based,High‐Yielding,and Fast Separation of Different Charged Organics in Water

We report a self‐propelled Janus silica micromotor as a motion‐based analytical method for achieving fast target separation of polyelectrolyte microcapsules, enriching different charged organics with low molecular weights in water. The self‐propelled Janus silica micromotor catalytically decomposes a hydrogen peroxide fuel and moves along the direction of the catalyst face at a speed of 126.3 μm s^?1. Biotin‐functionalized Janus micromotors can specifically capture and rapidly transport streptavidin‐modified polyelectrolyte multilayer capsules, which could effectively enrich and separate different charged organics in water. The interior of the polyelectrolyte multilayer microcapsules were filled with a strong charged polyelectrolyte, and thus a Donnan equilibrium is favorable between the inner solution within the capsules and the bulk solution to entrap oppositely charged organics in water. The integration of these self‐propelled Janus silica micromotors and polyelectrolyte multilayer capsules into a lab‐on‐chip device that enables the separation and analysis of charged organics could be attractive for a diverse range of applications.     

Role of Intramolecular Aromatic π–π Interactions in the Self‐Assembly of Di‐l‐Phenylalanine Dipeptide Driven by Intermolecular Interactions: Effect of Alanine Substitution

Although the role of intermolecular aromatic π–π interactions in the self‐assembly of di‐l ‐phenylalanine (l ‐Phe‐l ‐Phe, FF), a peptide that is known for hierarchical structure, is well established, the influence of intramolecular π–π interactions on the morphology of the self‐assembled structure of FF has not been studied. Herein, the role of intramolecular aromatic π–π interactions is investigated for FF and analogous alanine (Ala)‐containing dipeptides, namely, l ‐Phe‐l ‐Ala (FA) and l ‐Ala‐l ‐Phe (AF). The results reveal that these dipeptides not only form self‐assemblies, but also exhibit remarkable differences in structural morphology. The morphological differences between FF and the analogues indicate the importance of intramolecular π–π interactions, and the structural difference between FA and AF demonstrates the crucial role of the nature of intramolecular side‐chain interactions (aromatic–aliphatic or aliphatic–aromatic), in addition to intermolecular interactions, in deciding the final morphology of the self‐assembled structure. The current results emphasise that intramolecular aromatic π–π interaction may not be essential to induce self‐assembly in smaller peptides, and π (aromatic)–alkyl or alkyl–π (aromatic) interactions may be sufficient. This work also illustrates the versatility of aromatic and a combination of aromatic and aliphatic residues in dipeptides in the formation of structurally diverse self‐assembled structures.     

Free‐Standing,Single‐Bilayer‐Thick Polymeric Nanosheets via Spatially Confined Polymerization

Polymeric nanosheets organized by molecular building blocks bearing specifically oriented reactive groups provide abundant and versatile strategies for tailoring structure and chemical functionality periodically over extended length scales that complement graphene. Here we report the bulk synthesis of free‐standing polymeric nanosheets via spatially confined polymerization from an elaborate 2D supramolecular system composed of two liquid‐crystalline lamellar bilayer membranes of a self‐assembled nonionic surfactant—dodecylglyceryl itaconate (DGI)—sandwiched by a water layer. By employing a covalent polymerization on the lamellar bilayer membranes, single‐bilayer‐thick (4.2 nm), and large area (greater than 100 μm²) polymeric nanosheets of bilayer membranes are achieved. The polymeric nanosheets could serve as a well‐defined 2D platform for post‐functionalization for producing advanced hybrid materials by introducing the reactions on the hydroxyl groups at the head of DGI on the outer surfaces.

     

Catalysis‐Driven Self‐Thermophoresis of Janus Plasmonic Nanomotors

It is highly demanding to design active nanomotors that can move in response to specific signals with controllable rate and direction. A catalysis‐driven nanomotor was constructed by designing catalytically and plasmonically active Janus gold nanoparticles (Au NPs), which generate an asymmetric temperature gradient of local solvent surrounding NPs in catalytic reactions. The self‐thermophoresis behavior of the Janus nanomotor is monitored from its inherent plasmonic response. The diffusion coefficient of the self‐thermophoresis motion is linearly dependent on chemical reaction rate, as described by a stochastic model.     

Characterization and cytocompatibility of polydopamine on MAO‐HA coating supported on Mg‐Zn‐Ca alloy

Magnesium has been suggested as a potential biodegradable metal for the usage as orthopaedic implants. However, high degradation rate in physiological environment remains the biggest challenge, impeding wide clinical application of magnesium‐based biomaterials. In order to reduce its degradation rate and improve the biocompatibility, micro‐arc oxidation coating doped with HA particles (MAO‐HA) was applied as the inner coating, and polydopamine (PDA) film was synthesized by dopamine self‐polymerization as the outer coating. The microstructure evolution of the coating was characterized using scanning electron microscopy (SEM), atomic force microscope (AFM), X‐ray diffraction analyses (XRD), Fourier transform infrared spectroscopy (FT‐IR), and X‐ray photoelectron spectroscopy (XPS). The results showed that PDA film had covered the entire surface of MAO‐HA coating and the pore size of MAO‐HA coating decreased. The root mean square (RMS) roughness of PDA/MAO‐HA coatings was approximately 106.46 nm, which was closer to the optimum surface roughness for cellular attachment as compared with MAO‐HA coatings. Contact angle measurement indicated that the surface wettability had been transformed from hydrophobic to hydrophilic due to the introduction of PDA. The PDA/MAO‐HA coatings exhibited better corrosion resistance in vitro, with the self‐corrosion potential increasing by 150 mV and the corrosion current density decreasing from 2.09 × 10^?5 A/cm ² to 1.46 × 10^?6 A/cm ² . In hydrogen evolution tests, the corrosion rates of the samples coated with PDA/MAO‐HA and MAO‐HA were 4.40 and 5.95 mm/y, respectively. MTS assay test and cell‐surface interactions experiment demonstrated that PDA/MAO‐HA coatings exhibited good cellular compatibility and could promote the adhesion and proliferation of MC3T3‐E1 cells.     

Self‐Propelled Janus Mesoporous Silica Nanomotors with Sub‐100 nm Diameters for Drug Encapsulation and Delivery

The synthesis of an innovative self‐propelled Janus nanomotor with a diameter of about 75 nm that can be used as a drug carrier is described. The Janus nanomotor is based on mesoporous silica nanoparticles (MSNs) with chromium/platinum metallic caps and propelled by decomposing hydrogen peroxide to generate oxygen as a driving force with speeds up to 20.2 μm s^?1 (about 267 body lengths per second). The diffusion coefficient (D) of nanomotors with different H₂O₂ concentrations is calculated by tracking the movement of individual particles recorded by means of a self‐assembled fluorescence microscope and is significantly larger than free Brownian motion. The traction of a single Janus MSN nanomotor is estimated to be about 13.47×10^?15 N. Finally, intracellular localization and drug release in vitro shows that the amount of Janus MSN nanomotors entering the cells is more than MSNs with same culture time and particle concentrations, meanwhile anticancer drug doxorubicin hydrochloride loaded in Janus MSNs can be slowly released by biodegradation of lipid bilayers in cells.     

Photoresponsive Nanosheets of Polyoxometalates Formed by Controlled Self‐Assembly Pathways

Anionic Keggin polyoxometalates (POMs) and ether linkage‐enriched ammonium ions spontaneously self‐assemble into rectangular ultrathin nanosheets in aqueous media. The structural flexibility of the cation is essential to form oriented nanosheets; as demonstrated by single‐crystal X‐ray diffraction measurements. The difference in initial conditions exerts significant influence on selecting for self‐assembly pathways in the energy landscape. Photoillumination of the POM sheets in pure water causes dissolution of reduced POMs, which allowed site‐specific etching of nanosheets using laser scanning microscopy. By contrast, photoetching was suppressed in aqueous AgNO₃ and site‐selective deposition of silver nanoparticles occurred as a consequence of electron transfer from the photoreduced POMs to Ag⁺ ions on the nanosheet surface.     

Control of H‐ and J‐Type π Stacking by Peripheral Alkyl Chains and Self‐Sorting Phenomena in Perylene Bisimide Homo‐ and Heteroaggregates

The synthesis, self‐assembly, and gelation ability of a series of organogelators based on perylene bisimide (PBI) dyes containing amide groups at imide positions are reported. The synergetic effect of intermolecular hydrogen bonding among the amide functionalities and π–π stacking between the PBI units directs the formation of the self‐assembled structure in solution, which beyond a certain concentration results in gelation. Effects of different peripheral alkyl substituents on the self‐assembly were studied by solvent‐ and temperature‐dependent UV‐visible and circular dichroism (CD) spectroscopy. PBI derivatives containing linear alkyl side chains in the periphery formed H‐type π stacks and red gels, whereas by introducing branched alkyl chains the formation of J‐type π stacks and green gels could be achieved. Sterically demanding substituents, in particular, the 2‐ethylhexyl group completely suppressed the π stacking. Coaggregation studies with H‐ and J‐aggregating chromophores revealed the formation of solely H‐type π stacks containing both precursor molecules at a lower mole fraction of J‐aggregating chromophore. Beyond a critical composition of the two chromophores, mixed H‐aggregate and J‐aggregate were formed simultaneously, which points to a self‐sorting process. The versatility of the gelators is strongly dependent on the length and nature of the peripheral alkyl substituents. CD spectroscopic studies revealed a preferential helicity of the aggregates of PBI building blocks bearing chiral side chains. Even for achiral PBI derivatives, the utilization of chiral solvents such as (R)‐ or (S)‐limonene was effective in preferential population of one‐handed helical fibers. AFM studies revealed the formation of helical fibers from all the present PBI gelators, irrespective of the presence of chiral or achiral side chains. Furthermore, vortex flow was found to be effective in macroscopic orientation of the aggregates as evidenced from the origin of CD signals from aggregates of achiral PBI molecules.     

Bioinorganic Nanocomposite Hydrogels Formed by HRP–GOx‐Cascade‐Catalyzed Polymerization and Exfoliation of the Layered Composites

The mild preparation of multifunctional nanocomposite hydrogels is of great importance for practical applications. We report that bioinorganic nanocomposite hydrogels, with calcium niobate nanosheets as cross‐linkers, can be prepared by dual‐enzyme‐triggered polymerization and exfoliation of the layered composite. The layered HRP/calcium niobate composites (HRP=horseradish peroxidase) are formed by the assembly of the calcium niobate nanosheets with HRP. The dual‐enzyme‐triggered polymerization can induce the subsequent exfoliation of the layered composite and final gelation through the interaction between polymer chains and inorganic nanosheets. The self‐immobilized HRP‐GOx enzymes (GOx=glucose oxidase) within the nanocomposite hydrogel retain most of enzymatic activity. Evidently, their thermal stability and reusability can be improved. Notably, our strategy could be easily extended to other inorganic layered materials for the fabrication of other functional nanocomposite hydrogels.     

Spontaneously Self‐Assembled Naphthalimide Nanosheets: Aggregation‐Induced Emission and Unveiling a‐PET for Sensitive Detection of Organic Volatile Contaminants in Water

A simple design strategy of long alkyl chain substitution was formulated to block the detrimental π–π interaction that potentially transforms the aggregation‐caused quenching (ACQ) chromophores into aggregation‐induced emission (AIE) active smart nanomaterials. The long octadecyl pendant chain substituted naphthalimide (NI) derivatives self‐assembled into fluorescent nanosheets (NS)‐like structures that spontaneously have surfaces coated with NI cores in water. The fluorescent NS were subsequently used to recognize the organic volatile contaminants (OVCs) at ppb levels via an acceptor‐excited photoinduced electron transfer (a‐PET) mechanism, unveiled as the first representative example. A new design strategy is thereby provided to detect toxic xylene derivatives in water using smart nanomaterials.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

A Hot‐Segment‐Based Approach for the Design of Cross‐Amyloid Interaction Surface Mimics as Inhibitors of Amyloid Self‐Assembly

The design of inhibitors of protein–protein interactions mediating amyloid self‐assembly is a major challenge mainly due to the dynamic nature of the involved structures and interfaces. Interactions of amyloidogenic polypeptides with other proteins are important modulators of self‐assembly. Here we present a hot‐segment‐linking approach to design a series of mimics of the IAPP cross‐amyloid interaction surface with Aβ (ISMs) as nanomolar inhibitors of amyloidogenesis and cytotoxicity of Aβ, IAPP, or both polypeptides. The nature of the linker determines ISM structure and inhibitory function including both potency and target selectivity. Importantly, ISMs effectively suppress both self‐ and cross‐seeded IAPP self‐assembly. Our results provide a novel class of highly potent peptide leads for targeting protein aggregation in Alzheimer’s disease, type 2 diabetes, or both diseases and a chemical approach to inhibit amyloid self‐assembly and pathogenic interactions of other proteins as well.     

Hierarchical Hollow Nanoprisms Based on Ultrathin Ni‐Fe Layered Double Hydroxide Nanosheets with Enhanced Electrocatalytic Activity towards Oxygen Evolution

The oxygen evolution reaction (OER) is involved in various renewable energy systems, such as water‐splitting cells and metal–air batteries. Ni‐Fe layered double hydroxides (LDHs) have been reported as promising OER electrocatalysts in alkaline electrolytes. The rational design of advanced nanostructures for Ni‐Fe LDHs is highly desirable to optimize their electrocatalytic performance. Herein, we report a facile self‐templated strategy for the synthesis of novel hierarchical hollow nanoprisms composed of ultrathin Ni‐Fe LDH nanosheets. Tetragonal nanoprisms of nickel precursors were first synthesized as the self‐sacrificing template. Afterwards, these Ni precursors were consumed during the hydrolysis of iron(II) sulfate for the simultaneous growth of a layer of Ni‐Fe LDH nanosheets on the surface. The resultant Ni‐Fe LDH hollow prisms with large surface areas manifest high electrocatalytic activity towards the OER with low overpotential, small Tafel slope, and remarkable stability.