Significant Polar Comonomer Enchainment in Zirconium‐Catalyzed,Masking Reagent‐Free,Ethylene Copolymerizations

In principal, the direct copolymerization of ethylene with polar comonomers should be the most efficient means to introduce functional groups into conventional polyolefins but remains a formidable challenge. Despite the tremendous advances in group 4‐centered catalysis for olefin polymerization, successful examples of ethylene + polar monomer copolymerization are rare, especially without Lewis acidic masking reagents. Here we report that certain group 4 catalysts are very effective for ethylene + CH₂=CH(CH₂)_nNR₂ copolymerizations with activities up to 3400 Kg copolymer mol^?1‐Zr h^‐1 atm^‐1, and with comonomer enchainment up to 5.5 mol % in the absence of masking reagents. Group 4 catalyst‐amino‐olefin structure–activity‐selectivity relationships reflect the preference of olefin activation over free amine coordination, which is supported by mechanistic experiments and DFT analysis. These results illuminate poorly understood facets of d⁰ metal‐catalyzed polar olefin monomer copolymerization processes.     

Scandium‐Catalyzed Self‐Assisted Polar Co‐monomer Enchainment in Ethylene Polymerization

Direct coordinative copolymerization of ethylene with functionalized co‐monomers is a long‐sought‐after approach to introducing polyolefin functionality. However, functional‐group Lewis basicity typically depresses catalytic activity and co‐monomer incorporation. Finding alternatives to intensively studied group 4 d⁰ and late‐transition‐metal catalysts is crucial to addressing this long‐standing challenge. Shown herein is that mono‐ and binuclear organoscandium complexes with a borate cocatalyst are active for ethylene + amino olefin [AO; H₂C=CH(CH₂)_nNR₂] copolymerizations in the absence of a Lewis‐acidic masking reagent. Both activity (up to 4.2×10² kg mol⁻¹⋅h^−1> atm^−1>) and AO incorporation (up to 12 % at 0.2 m [AO]) are appreciable. Linker‐length‐dependent (n) AO incorporation and mechanistic probes support an unusual functional‐group‐assisted enchainment mechanism. Furthermore, the binuclear catalysts exhibit enhanced AO tolerance and enhanced long chain AO incorporation.     

Copolymerization of ethylene with cyclopentene or 2‐butene with half titanocenes‐based catalysts

Half titanocenes (CpCH₂CH₂O)TiCl₂ (1), (CpCH₂CH₂OCH₃)TiCl₃ (2), and CpTiCl₃ (3), activated by methylaluminoxane (MAO) were tested in copolymerization of ethylene with internal olefins such as cyclopentene. All the catalysts were able to give incorporation of cyclopentene in polyethylene matrix. ¹³C NMR analysis of obtained copolymers showed that the catalytic systems have low regiospecificity. In fact, in ethylene–cyclopentene copolymers, cyclic olefin inserts with both 1,2 and 1,3‐enchainment. X‐ray powder diffraction analysis of these copolymers confirmed that 1,2 inserted cyclopentene units are excluded from crystalline phase, whereas 1,3‐cyclopentene units are included, giving rise to expansion of unit cell of crystalline polyethylene. Titanium‐based catalysts were investigated also in the copolymerization of ethylene with E and Z‐2‐butene. Only complex (1) was able to give copolymers and ¹³C NMR analysis of products showed 2‐3, 1‐3, and 1‐2 insertion of 2‐butene. Differential scanning calorimetry analysis displayed that ethylene–cyclopentene, as well as ethylene‐2‐butene, copolymers are crystalline and their melting point decreases by increasing the comonomer content. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4725–4733, 2008     

Alternating Ring‐Opening Metathesis Copolymerization by Grubbs‐Type Initiators with Unsymmetrical N‐Heterocyclic Carbenes

A series of Ru^IV–alkylidenes based on unsymmetrical imidazolin‐2‐ylidenes, that is, [RuCl₂{1‐(2,4,6‐trimethylphenyl)‐3‐R‐4,5‐dihydro‐(3H)‐imidazol‐1‐ylidene}(CHPh)(pyridin)] (R=CH₂Ph ( 5 ), Ph ( 6 ), ethyl ( 7 ), methyl ( 8 )), have been synthesized. These and the parent initiators [RuCl₂(PCy₃){1‐(2,4,6‐trimethylphenyl)‐3‐R‐4,5‐dihydro‐(3H)‐imidazol‐1‐ylidene}(CHC₆H₅)] (R=CH₂C₆H₅ ( 1 ), C₆H₅ ( 2 ), ethyl ( 3 )) were used for the alternating copolymerization of norborn‐2‐ene (NBE) with cis‐cyclooctene (COE) and cyclopentene (CPE), respectively. Alternating copolymers, that is, poly(NBE‐alt‐COE)_n and poly(NBE‐alt‐CPE)_n containing up to 97 and 91 % alternating diads, respectively, were obtained. The copolymerization parameters of the alternating copolymerization of NBE with CPE under the action of initiators 1 – 3 and 5 – 8 were determined by using both a zero‐ and first‐order Markov model. Finally, kinetic investigations using initiators 1 – 3 , 6 , and 7 were carried out. These revealed that in contrast to the 2nd‐generation Grubbs‐type initiators 1 – 3 the corresponding pyridine derivatives 6 and 7 represent fast and quantitative initiating systems. Hydrogenation of poly(NBE‐alt‐COE)_n yielded a fully saturated, hydrocarbon‐based polymer. Its backbone can formally be derived by 1‐olefin polymerization of CPE (1,3‐insertion) followed by five ethylene units and thus serves as an excellent model compound for 1‐olefin polymerization‐derived copolymers.     

α‐olefin homopolymerization and ethylene/1‐hexene copolymerization catalysed by novel ansa‐group IV complexes/MAO system

The catalytic properties of a set of ansa‐complexes (R‐Ph)₂C(Cp)(Ind)MCl₂ [R = ^tBu, M = Ti ( 3 ), Zr ( 4 ) or Hf ( 5 ); R = MeO, M = Zr ( 6 ), Hf ( 7 )] in α‐olefin homopolymerization and ethylene/1‐hexene copolymerization were explored in the presence of MAO (methylaluminoxane). Complex 4 with steric bulk ^tBu group on phenyl exhibited remarkable catalytic activity for ethylene polymerization. It was 1.6‐fold more active than complex 11 [Ph₂C(Cp)(Ind)ZrCl₂] at 11 atm ethylene pressure and was 4.8‐fold more active at 1 atm pressure. The introduction of bulk substituent ^tBu into phenyl groups not only increased the catalytic activity greatly but also enhanced the content of 1‐hexene in ethylene/1‐hexene copolymerization. The highest 1‐hexene incorporation was 25.4%. In addition, 4 was also active for propylene and 1‐hexene homopolymerization, respectively, and low isotactic polypropylene (mmmm = 11.3%) and isotactic polyhexene (mmmm = 31.6%) were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

A Joint Experimental/Theoretical Investigation of the Statistical Olefin/Conjugated Diene Copolymerization Catalyzed by a Hemi‐Lanthanidocene [(Cp*)(BH4)LnR]

Statistical copolymerization of ethylene and isoprene was achieved by using a borohydrido half‐lanthanidocene complex. Under copolymerization conditions, activation of [(Cp*)(BH₄)₂Nd(thf)₂] (Cp*=η⁵‐C₅Me₅) by an appropriate alkylating agent affords trans‐1,4‐poly‐isoprene‐co‐ethylene. Analysis of the microstructure of the copolymer revealed the presence of successive short sequences of ethylene/ethylene, trans‐1,4‐isoprene/ethylene, and trans‐1,4‐isoprene/trans‐1,4‐isoprene. A small amount of 1,2‐insertion of isoprene was observed, and no cyclic structures within the chain were characterized. Test runs showed that these catalysts are unable to copolymerize α‐olefins (such as hex‐1‐ene) with isoprene. The probable initial steps in the copolymerization have been computed at the DFT level of theory. Analysis of the energy profile provides insight into the catalyst’s activity and selectivity. Our theoretical results highlight the key role played by the allyl intermediate, in which diene insertion, and to a lesser extent olefin insertion, is the rate‐determining step of the process. These results also illustrate the coordination behavior of the allyl ligand during the insertion of an incoming monomer, which directly inserts, after pre‐coordination to the metal center, into the η³‐allyl ligand without inducing an η³ to η¹ haptotropic shift. Finally, the inactivity of this family of catalysts towards the copolymerization of hex‐1‐ene was rationalized on the basis of the free‐energy profile of the copolymerization.     

Ethylene polymerization and copolymerization with 10‐undecen‐1‐ol using the catalyst system DADNi(NCS)2/MAO

The catalyst DADNi(NCS)₂ (DAD = (ArN?C(Me)? C(Me)?ArN); Ar = 2,6‐C₆H₃), activated by methylaluminoxane, was tested in ethylene polymerization at temperatures above 25 °C and variable Al/Ni ratio. The system was shown to be active even at 80 °C and when supported on silica. However, catalyst activity decreased. The catalyst system was also tested in ethylene and 10‐undecen‐1‐ol copolymerization at different ethylene pressures. The best activities were obtained at low polar monomer concentration (0.017 mol/L), using triisopropylaluminum (Al‐i‐Pr₃) to protect the polar monomer. The incorporation of the comonomer increased with the increase of polar monomer concentration. According to ¹³C NMR analyses, all the resulting polyethylenes were highly branched and the polar monomer incorporation decreased as ethylene pressure increased. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5199–5208, 2007     

Synthesis and properties of polyethylene with side‐chain triphenylamines as hole‐transporting materials

The copolymerization of ethylene with triphenylamine (TPA)‐containing α‐olefin monomer 1 using a rac‐Et(Ind)₂ZrCl₂ ( EBIZr )/MAO catalytic system was investigated to prepare polyethylene with pendent TPA groups. Despite the presence of a large excess of TPA moieties, the polymerization reactions efficiently produce copolymers of high‐molecular‐weight with the comonomer incorporation up to 6.1 mol % upon varying the comonomer concentration in the feed. Inspection of the aliphatic region of the ¹³C‐NMR spectrum and the estimated copolymerization parameters (r ₁ ≈ 0 for 1 and r_E ≈ 43 for ethylene) reveal the presence of isolated comonomer units in the polymer chain. While UV–vis absorption measurements of the copolymers show an invariant absorption feature, PL spectra exhibit a slightly red‐shifted emission with increasing content of 1 in the polymer chain. All the copolymers show high thermal stability (T_d5 > 436 °C), and the electrochemical stability toward oxidation is also observed. Particularly, the copolymer displays hole‐transporting ability for the stable green emission of Alq₃ when incorporated into the hole‐transporting layer of an electroluminescence device. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5816–5825, 2008     

Synthesis of a new salphen‐type titanium complex and its application in ethylene polymerization and copolymerization

TiCl₂[salphen(di‐tBu)] was synthesized, characterized and employed as pre‐catalyst in ethylene homo‐ and copolymerization with propylene, 1‐octene and 10‐undecen‐1‐ol. X‐ray diffraction study on the titanium complex revealed a distorted octahedral coordination of the central metal with a trans‐Cl, cis‐O, cis‐N arrangement. The complex combined with MAO afforded moderate catalytic activities in ethylene polymerization. Furthermore the catalyst not only copolymerized ethylene with apolar monomer (propylene and 1‐octene), but also possessed significant capability of incorporation with polar monomer (10‐undecen‐1‐ol). Only single insertion of 1‐octene unit in ethylene‐co‐1‐octene polymer was detected by ¹³C NMR spectrum. Copyright © 2010 John Wiley & Sons, Ltd.     

Polypropylene and poly(ethylene‐co‐1‐octene) effective synthesis with diamine‐bis(phenolate) complexes: Effect of complex structure on catalyst activity and product microstructure

A series of group 4 metal complexes bearing amine‐bis(phenolate) ligands with the amino side‐arm donor: (μ‐O)[Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)₂ZrCl]₂ ( 1a ), R₂N(CH₂)₂N(CH₂‐2‐O‐3‐R¹‐5‐R²‐C₆H₂)₂TiCl₂ (R = Me, R¹, R² = tBu ( 2a ), R = iPr, R¹, R² = tBu ( 2b ), R = iPr, R¹ = tBu, R² = OMe ( 2c )), and Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)(CH₂‐2‐O‐C₆H₄)TiCl₂ ( 2d ) are used in ethylene and propylene homopolymerization, and ethylene/1‐octene copolymerization. All complexes, upon their activation with Al(iBu)₃/Ph₃CB(C₆F₅)₄, exhibit reasonable catalytic activity for ethylene homo‐ and copolymerization giving linear polyethylene with high to ultra‐high molecular weight (600·× 10³–3600·× 10³ g/mol). The activity of 1a /Al(iBu)₃/Ph₃CB(C₆F₅)₄ shows a positive comonomer effect, leading to over 400% increase of the polymer yield, while the addition of 1‐octene causes a slight reduction of the activity of the complexes 2a‐2d . The complexes with the NMe₂ donor group ( 2a , 2d , 1a ) display a high ability to incorporate a comonomer (up to 9–22 mol%), and the use of a bulkier donor group, N(iPr)₂ ( 2b , 2c ), results in a lower 1‐octene incorporation. All the produced copolymers reveal a broad chemical composition distribution. In addition, the investigated complexes polymerized propylene with the moderate ( 1a , 2a ) to low ( 2b‐2d ) activity, giving polymers with different microstructures, from purely atactic to isotactically enriched (mmmm = 28%). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2467–2476     

Highly cis‐1,4 Selective Living Polymerization of Unmasked Polar 2‐(2‐Methylidenebut‐3‐enyl)Furan and Diels–Alder Addition

The polymerization of a new polar diene‐based monomer 2‐(2‐methylidenebut‐3‐enyl)furan (MBEF) without masking is achieved by using the bis(phosphino)carbazoleide‐ligated yttrium (Y) alkyl complex upon the activation of [Ph₃C][B(C₆F₅)₄]. Under mild conditions, the polymerizations under the monomer‐to‐Y ratios ranging from 100:1 to 500:1 perform fluently in high yields. The afforded polydienes bearing pendant terminal furan groups have high cis‐1,4‐regularity up to 98.6% and molecular weights close to the theoretic values and narrow polymer dispersity index(PDI) (1.13–1.17) suggesting a livingness polymerization mode. In addition, this novel polydiene is an excellent building block for preparing functional rubber materials. For example, via Diels–Alder addition of furan groups under mild conditions, hydroxyl groups are successfully introduced on the side chains efficiently in a 75% conversion. Furthermore, the copolymerization of polar MBEF and nonpolar isoprene is also successfully realized by the bis(phosphino) carbazoleide‐ligated scandium analog to access furan‐modified cis‐1,4 (>97%) polyisoprene with different MBEF contents (5.3%, 8.7%).     

Copolymerization of 2‐butene and ethylene with catalysts based on titanium and zirconium complexes

The polymerization of 2‐butene and its copolymerization with ethylene have been investigated using four kinds of dichlorobis(β‐diketonato)titanium complexes, [ArN(CH₂)₃NAr]TiCl₂ (Ar = 2,6‐ⁱPr₂C₆H₃) and typical metallocene catalysts. The obtained copolymers display lower melting points than those produced of homopolyethylene under the same polymerization conditions. ¹³C NMR analysis indicates that 9.3 mol‐% of 2‐butene units were incorporated into the polymer chains with Ti(BFA)₂Cl₂‐MAO as the catalyst system. With the trans‐2‐butene a higher copolymerization rate was observed than with cis‐2‐butene. A highly regioselective catalyst system for propene polymerization, [ArN(CH₂)₃NAr]TiCl₂ complex using a mixture of triisobutylaluminium and Ph₃CB(C₆F₅)₄ as cocatalyst, was found to copolymerize a mixture of 1‐butene and trans‐2‐butene with ethylene up to 3.1 mol‐%. Monomer isomerization‐polymerization proceeds with typical metallocene catalysts to produce copolymers consisting of ethylene and 1‐butene.     

Copolymerization of ethylene with 1‐hexene promoted by novel multi‐chelated non‐metallocene complexes with imine bridged imidazole ligand

A series of novel bridged multi‐chelated non‐metallocene catalysts is synthesized by the treatment of N,N‐imidazole, N,N‐dimethylimidazole, and N,N‐benzimidazole with n‐BuLi, 2,6‐dimethylaniline, and MCl₄ (M = Ti, Zr) in THF. These catalysts are used for copolymerization of ethylene with 1‐hexene after activated by methylaluminoxane (MAO). The effects of polymerization temperature, Al/M molar ratio, and pressure of monomer on ethylene copolymerization behaviors are investigated in detail. These results reveal that these catalysts are favorable for copolymerization of ethylene with 1‐hexene featured high catalytic activity and high comonomer incorporation. The copolymer is characterized by ¹³C NMR, WAXD, GPC, and DSC. The results confirm that the obtained copolymer features broad molecular weight distribution (MWD) about 33–35 and high 1‐hexene incorporation up to 9.2 mol %, melting temperature of the copolymer depends on the content of 1‐hexene incorporation within the copolymer chain and 1‐hexene unit in the copolymer chain isolates by ethylene units. The homopolymer of ethylene has broader MWD with 42–46. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 417–424, 2010     

Homo‐ and copolymerization of norbornene and 5‐norbornene‐2‐yl acetate with bis‐(β‐ketonaphthylamino)palladium(II)/B(C6F5)3 catalytic system

The polymerization of norbornene with bis(β‐ketonaphthylamino) palladium(II), Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂, in combination with tris(pentafluorophenyl)borane (B(C₆F₅)₃), was investigated by varying the B:Pd(II) molar ratio, monomer concentration, reaction temperature, and time. The catalytic activity was found to reach 2.8 × 10⁴ gPolymer/(molPd^?h) and the obtained polynorbornene (PNBE) was confirmed to be vinyl addition polymer and showed good thermo‐stability (T_dec > 350°C), but exhibited poor solubility in organic solvents due to the relative higher stereo regularity. Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂/B(C₆F₅)₃ system is also an active catalyst for copolymerization of norbornene and 5‐norbornene‐2‐yl acetate (NBE‐OCOCH₃) in toluene with moderate yields (in 9.2–36.5% yields) and produces the addition‐type copolymer with relatively high molecular weights (0.96 × 10⁴–2.13 × 10⁴ g/mol). The incorporation of functional group in the copolymer can be controlled up to 0.9–23.5 mol% by varying the NBE‐OCOCH₃ monomer feed ratios from 10 to 90%. The copolymers are proved to be noncrystalline and show good solubility in common organic solvents and excellent thermal stability up to 350°C. Copyright © 2011 John Wiley & Sons, Ltd.     

Copolymerization behavior of titanium imidazolin‐2‐iminato complexes

Monocyclopentadienyl titanium imidazolin‐2‐iminato complexes [Cp′Ti(L)X₂] 1a (Cp′ = cyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), 1b (X = CH₃); 2 (Cp′ = cyclopentadienyl, L = 1,3‐diisopropylimidazolin‐2‐imide, X = Cl); 3 (Cp′ = tert‐butylcyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), upon activation with methylaluminoxane (MAO) were active for the polymerization of ethylene and propylene and the copolymerization of ethylene and 1‐hexene. Catalysts derived from imidazolin‐2‐iminato tropidinyl titanium complex 4 = [(Trop)Ti(L)Cl₂] (Trop = tropidinyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide) were much less active. Narrow polydispersities were observed for ethylene and propylene polymerization, but the copolymerization of ethylene/hexene led to bimodal molecular weight distributions. The productivity of catalysts derived from the dialkyl complex 1b activated with [Ph₃C][B(C₆F₅)₄] or B(C₆F₅)₃ were less active for ethylene/hexene copolymerization but yielded ethylene/hexene copolymers of narrower molecular weight distributions than those derived from 1a/MAO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6064–6070, 2008     

Synthesis and polymerization of 5‐(methacrylamido)tetrazole,a water‐soluble acidic monomer

The reaction of methacryloyl chloride with 5‐aminotetrazole gave the polymerizable methacrylamide derivative 5‐(methacrylamido)tetrazole ( 4 ) in one step. The monomer had an acidic tetrazole group with a pK_a value of 4.50 ± 0.01 in water methanol (2:1). Radical polymerization proceeded smoothly in dimethyl formamide or, after the conversion of monomer 4 into sodium salt 4‐Na , even in water. A superabsorbent polymer gel was obtained by the copolymerization of 4‐Na and 0.08 mol % N,N′‐methylenebisacrylamide. Its water absorbency was about 200 g of water/g of polymer, although the extractable sol content of the gel turned out to be high. The consumption of 4‐Na and acrylamide (as a model compound for the crosslinker) during a radical polymerization at 57 °C in D₂O was followed by ¹H NMR spectroscopy. Fitting the changes in the monomer concentration to the integrated form of the copolymerization equation gave the reactivity ratios r _4‐Na = 1.10 ± 0.05 and r_acrylamide = 0.45 ± 0.02, which did not differ much from those of an ideal copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4333–4343, 2002     

Novel cyclohexyl‐substituted salicylaldiminato–nickel(II) complex as a catalyst for ethylene homopolymerization and copolymerization

The cyclohexyl‐substituted salicylaldiminato–Ni(II) complex [O? (3‐C₆H₁₁)(5‐CH₃)C₆H₂CH?N‐2,6‐C₆H₃ⁱPr₂]Ni(PPh₃)(Ph) ( 4 ) has been synthesized and characterized with ¹H NMR and X‐ray structure analysis. In the presence of phosphine scavengers such as bis(1,5‐cyclooctadiene)nickel(0) [Ni(COD)₂], triisobutylaluminum (TIBA), and triethylaluminum (TEA), 4 is an active catalyst for ethylene polymerization and copolymerization with the polar monomers tert‐butyl‐10‐undecenoate, methyl‐10‐undecenoate, and 4‐penten‐1‐ol under mild conditions. The polymerization parameters affecting the catalytic activity and viscosity‐average molecular weight of polyethylene, such as the temperature, time, ethylene pressure, and catalyst concentration, are discussed. A polymerization activity of 3.62 × 10⁵ g of PE (mol of Ni h)^?1 and a weight‐average molecular weight of polyethylene of 5.73 × 10⁴ g^.mol^?1 have been found for 10 μmol of 4 and a Ni(COD)₂/ 4 ratio of 3 in a 30‐mL toluene solution at 45 °C and 12 × 10⁵ Pa of ethylene for 20 min. The polydispersity index of the resulting polyethylene is about 2.04. After the addition of tetrahydrofuran and Et₂O to the reaction system, 4 exhibits still high activity for ethylene polymerization. Methyl‐10‐undecenoate (0.65 mol %), 0.74 mol % tert‐butyl‐10‐undecenoate, and 0.98 mol % 4‐penten‐1‐ol have been incorporated into the polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6071–6080, 2004     

Influence of Polyethylene Glycol Unit on Palladium‐ and Nickel‐Catalyzed Ethylene Polymerization and Copolymerization

The transition‐metal‐catalyzed copolymerization of olefins with polar functionalized co‐monomers represents a major challenge in the field of olefin polymerization. It is extremely difficult to simultaneously achieve improvements in catalytic activity, polar monomer incorporation, and copolymer molecular weight through ligand modifications. Herein we introduce a polyethylene glycol unit to some phosphine‐sulfonate palladium and nickel catalysts, and its influence on ethylene polymerization and copolymerization is investigated. In ethylene polymerization, this strategy leads to enhanced activity, catalyst stability, and increased polyethylene molecular weight. In ethylene copolymerization with polar monomers, improvements in all copolymerization parameters are realized. This effect is most significant for polar monomers with hydrogen‐bond‐donating abilities.     

New dithiazinanes and bis‐dithiazinanes‐bearing pendant ethylamines: Structure and reactivity

The structure and reactivity of a series of new ethylaminedithiazinanes and bis‐diethylaminedithiazinanes synthesized from formaldehyde, NaSH, and N,N‐dimethyl‐ethylene‐diamine ( 1 ), N‐methyl‐ethylene‐diamine ( 2 ), and N‐ethyl‐ethylene‐diamine ( 3 ) are reported. Compound 1 afforded 2‐([1,3,5]‐dithiazinan‐5‐yl)‐ethylene‐N,N‐dimethyl‐amine ( 4 ). The reaction of 4 with dry CH₂Cl₂ gave N‐{2‐([1,3,5]dithiazinan‐5‐yl)‐ethylene}‐N‐chloromethyl‐N,N‐dimethyl‐ammonium chloride ( 5 ) in high yield, whereas in wet CH₂Cl₂ and DMSO provided a mixture of 5 with N‐{2‐([1,3,5]‐dithiazinan‐5‐yl)‐ethylene}‐N,N‐dimethyl‐ammonium hydrochloride ( 6 ).bis‐{2‐([1,3,5]‐Dithiazinan‐5‐yl)‐ethylene‐N‐alkyl‐amino}‐methylene‐disulfides ( 7 ) and ( 8 ) formed by two dithiazinanes linked through the chain  (CH₂)₂ NRCH₂ S S CH₂ NR (CH₂)₂‐ ( 7 R = methyl, 8 R = ethyl) reacted with CH₂Cl₂ giving after neutralization of the hydrolysis products the ethylaminedithiazinanes with different pendant N‐groups [ (CH₂)₂NMeH₂⁺( 9 );  (CH₂)₂NEtH₂⁺ ( 10 );  (CH₂)₂NMeH ( 11 );  (CH₂)₂NEtH ( 12 );  (CH₂)₂NMeHBH₃ ( 13 )  (CH₂)₂NEtHBH₃ ( 14 ).  (CH₂)₂NMe₂BH₃ ( 15 ), and  (CH₂)₂NEtMeBH₃.( 16 )]. The x‐ray diffraction analyses of compounds 5 , 6 , 9 , and 10 are reported. Variable temperature NMR experiments afforded the Δ G^≠ of the ring interconversion of the six‐membered heterocycles 6 , 9 , and 10 . © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:59–71, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20657     

Gas‐phase reactions of Cl atoms with propane,n‐butane,and isobutane

Using the relative kinetic method, rate coefficients have been determined for the gas‐phase reactions of chlorine atoms with propane, n‐butane, and isobutane at total pressure of 100 Torr and the temperature range of 295–469 K. The Cl₂ photolysis (λ = 420 nm) was used to generate Cl atoms in the presence of ethane as the reference compound. The experiments have been carried out using GC product analysis and the following rate constant expressions (in cm³ molecule^?1 s^?1) have been derived: (7.4 ± 0.2) × 10^?11 exp [‐(70 ± 11)/ T], Cl + C₃H₈ → HCl + CH₃CH₂CH₂; (5.1 ± 0.5) × 10^?11 exp [(104 ± 32)/ T], Cl + C₃H₈ → HCl + CH₃CHCH₃; (7.3 ± 0.2) × 10^?11 exp[?(68 ± 10)/ T], Cl + n‐C₄H₁₀ → HCl + CH₃ CH₂CH₂CH₂; (9.9 ± 2.2) × 10^?11 exp[(106 ± 75)/ T], Cl + n‐C₄H₁₀ → HCl + CH₃CH₂CHCH₃; (13.0 ± 1.8) × 10^?11 exp[?(104 ± 50)/ T], Cl + i‐C₄H₁₀ → HCl + CH₃CHCH₃CH₂; (2.9 ± 0.5) × 10^?11 exp[(155 ± 58)/ T], Cl + i‐C₄H₁₀ → HCl + CH₃CCH₃CH₃ (all error bars are ± 2σ precision). These studies provide a set of reaction rate constants allowing to determine the contribution of competing hydrogen abstractions from primary, secondary, or tertiary carbon atom in alkane molecule. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 651–658, 2002