Cu(II) immobilized on Fe3O4–diethylenetriamine: A new magnetically recoverable catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and oxidative coupling of thiols

Cu(II) immobilized on Fe₃O₄–diethylenetriamine was designed as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H )‐ones and the oxidative coupling of thiols. The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and atomic absorption spectroscopy. Simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst with unaltered activity make our protocol a green and feasible synthetic strategy.     

Palladium supported on diaminoglyoxime‐functionalized Fe3O4 nanoparticles as a magnetically separable nanocatalyst in Heck coupling reaction

A hybrid material of palladium supported on diaminoglyoxime‐functionalized Fe₃O₄ was used as an effective and recyclable catalyst in Mizoroki–Heck coupling reactions. The catalyst was very effective for the Mizoroki–Heck reaction of aryl halides with styrene and conversion was in most cases excellent. The yields of the products were in the range 75–98%. The catalyst showed good stability and could be recovered and reused for six reaction cycles without significant leaching and loss its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetically Separable and Versatile Pd/Fe3O4 Catalyst for Efficient Suzuki Cross‐Coupling Reaction and Selective Hydrogenation of Nitroarenes

Magnetic nanoparticle‐supported Pd/Fe₃O₄ was readily prepared and proved to be versatile catalyst for efficient Suzuki cross‐coupling reaction, and the reduction of nitroarenes under mild conditions (balloon H₂ pressure and room temperature). The catalyst could be conveniently recovered and reused several times with sustained catalytic activity.     

Synthesis of magnetically recyclable Fe3O4@[(EtO)3Si–L1H]/Pd(II) nanocatalyst and application in Suzuki and Heck coupling reactions

A Pd(II) Schiff base complex as an efficient and highly heterogeneous catalyst was developed by immobilization of a palladium complex on the surface of modified Fe₃O₄ magnetite nanoparticles. These surface‐modified nanoparticles were characterized using various techniques such as transmission electron microscopy, X‐ray diffraction, thermogravimetric analysis, vibrating sample magnetometry, elemental analysis and Fourier transform infrared spectroscopy. The palladium catalyst exhibited efficient catalytic activity in Suzuki and Heck coupling reactions. This method has notable advantages such as excellent chemoselectivity, mild reaction conditions, short reaction times and excellent yields. The yields of the products were in the range 85–100%. Also, the nanocatalyst can be easily recovered with a permanent magnet and reused at least five times without noticeable leaching or loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Palladium immobilized on amidoxime‐functionalized magnetic Fe3O4 nanoparticles: a highly stable and efficient magnetically recoverable nanocatalyst for sonogashira coupling reaction

We describe the synthesis of a novel Fe₃O₄/amidoxime (AO)/Pd nanocatalyst by grafting of AO groups on Fe₃O₄ nanoparticles and subsequent deposition of Pd nanoparticles. Prior to grafting of AO, the 2‐cyanoethyl‐functionalized Fe₃O₄ nanoparticles prepared through combining 2‐cyanoethyltriethoxysilane and Fe₃O₄ were treated with hydroxylamine. The AO‐grafted Fe₃O₄ nanoparticles were then used as a platform for the deposition of Pd nanoparticles. The catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, vibrating sample magnetometry, wavelength‐ and energy‐dispersive X‐ray spectroscopies and inductively coupled plasma analysis. Fe₃O₄/AO/Pd is novel phosphine‐free recyclable heterogeneous catalyst for Sonogashira reactions. Interestingly, the novel catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled seven times without any significant loss in activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

Preparation of magnetic Fe3O4/P (GMA‐DVB)‐PEI/Pd highly efficient catalyst with core‐shell structure

In this paper, a simple route for palladium (Pd) nanoparticles attached to the surface of hollow magnetic Fe₃O₄/P (GMA‐DVB)‐polyethyleneimine (PEI) microspheres was established. Due to the large amount of imidogen groups and tertiary amine groups presenting in the PEI, Pd²⁺ ions could be anchored to the support by complexation with a polyfunctional organic ligand. Thereafter, a magnetic Pd catalyst having a high loading amount and good dispersibility was obtained by reducing Pd²⁺ ions. Afterwards, the prepared catalyst was characterized by TEM, SEM, FTIR, XRD, TGA, VSM, and UV–vis in detail. Ultimately, their catalytic activity was evaluated using the reduction of 4‐nitrophenol (4‐NP). Research showed that the Fe₃O₄/P (GMA‐DVB)‐PEI/Pd catalyst possessed high catalytic performances for the reduction of 4‐NP with a conversion rate of 98.43% within 540 s. Furthermore, the catalyst could be easily recovered and reused at least for nine successive cycles.     

Development of recoverable and recyclable Fe3O4-supported organocatalysts for ring-opening polymerization

An iminotris(dimethylamino)phosphorane (HMP₁) phosphazene superbase has been anchored onto poly(hexachlorocyclotriphosphazene-co-4,4′-sulfonyldiphenol) (PZS)-coated Fe₃O₄ magnetic nanoparticles (MNPs) through efficient phosphorous-chloride (from PZS surface) and imino (from HMP₁) reaction. Subsequently, these novel heterogeneous Fe₃O₄@PZS@HMP₁ catalysts have been successfully utilized in the ring-opening polymerization of ε-caprolactone (ε-CL) and δ-valerolactone (δ-VL). Notably, such catalysts can be easily removed from the reaction mixture and reused 3 times without obvious activity loss.     

Synthesis of Fe3O4@SiO2@DOPisatin‐Ni(II) and Cu(II) nanoparticles: Highly efficient catalyst for the synthesis of sulfoxides and disulfides

The catalytic activity of two magnetic catalysts Fe₃O₄@SiO₂@DOPisatin‐M(II) (M = Ni, Cu) was investigated in the environmentally green H₂O₂ oxidant‐based oxidation of sulfides to sulfoxides and oxidative coupling of thiols to disulfides. By using these catalysts, various substrates were successfully converted into their corresponding product. These catalysts could also be reused multiple time without significant loss of activity. The physical and chemical properties of the catalysts were determined using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), energy dispersive X‐ray spectroscopy (EDX) and atomic absorption spectroscopy (AAS).     

Waste to wealth: conversion of nano‐magnetic eggshell (Fe3O4@Eggshell) to Fe3O4@Ca(HSO4)2: cheap,green and environment‐friendly solid acid catalyst

Eggshell is a hazardous waste by European Union regulations, so that discarded thousands of tons per year. To convert waste (eggshell) to wealth (catalyst), nano‐magnetic eggshell was prepared based on the nano‐Fe₃O₄, and then the eggshell was converted to Ca(HSO₄)₂ with organic acid, namely, chlorosulfonic acid. Based on the back titration, 5.18 mmol SO₄H group was loaded per gram of the nano‐structure. Using this method eggshell was converted to cheap, green and environment‐friendly solid acid catalyst. The prepared catalyst (nano‐ Fe₃O₄@Ca(HSO₄)₂) was characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDX), field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and thermal gravimetric analysis (TGA). The activity of eggshell waste‐derived catalysts was successfully evaluated in the synthesis of value‐added products, namely indazolo[1,2‐b]‐phthalazinetrione derivatives as a benchmark multicomponent reaction. In addition, design of experiments shows that increase in amount of catalyst (and temperature), boost the reaction yield, especially with steeper slope at higher temperature.     

Synthesis,characterization, and catalytic application of Fe3O4‐Si‐[CH2]3‐N=CH‐aryl for the efficient synthesis of novel poly‐substituted pyridines

Fe₃O₄ magnetic nanoparticles (MNPs) were functionalized by aminopropylsilane and reacted with aromatic aldehyde, and Fe₃O₄‐Si‐[CH₂]₃‐N=CH‐Aryl and Fe₃O₄‐Si‐(CH₂)₃‐NH‐CH₂‐Aryl MNPs were prepared as novel magnetic nanocatalysts. Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), and scanning and transmission electron microscopy (SEM and TEM) were used to identify the MNPs. The catalytic activity of the MNPs was evaluated in the one‐pot synthesis of some novel poly‐substituted pyridine derivatives.     

Copper immobilized on aminated ferrite nanoparticles by 2‐aminoethyl dihydrogen phosphate (Fe3O4@AEPH2‐CuII) catalyses the conversion of aldoximes to nitriles

Cu^II immobilized on aminated ferrite nanoparticles by 2‐aminoethyl dihydrogen phosphate (Fe₃O₄@AEPH₂‐Cu^II) was prepared and characterized using FT‐IR, TGA, TEM, EDX, VSM, XRD, CHN and ICP techniques. The easily prepared heterogeneous nanocatalyst demonstrated a significant catalytic performance for the transformation of aldoximes to nitriles that is far superior to previously reported methods. The reaction allows for the conversion of a wide variety of aldoximes including aromatic, aliphatic and heterocyclic aldoximes in good to excellent yields (50–98%). High efficiency, mild reaction conditions, easy work‐up, operational simplicity, simple purification of products and safe handling of the catalyst are important advantages of this method. In addition, the environmentally benign heterogeneous nanocatalyst can be easily recovered from reaction mixtures using an external magnet and reused several times without any loss of activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Efficient Sonogashira and A3 coupling reactions catalyzed by biosynthesized magnetic Fe3O4@Ni nanoparticles from Euphorbia maculata extract

In this work, biosynthesized Fe₃O₄@Ni nanoparticles using Euphorbia maculata aqueous have been used as effective catalysts in the synthesis of 2,3-disubstituted benzo[b]furan derivatives using three component coupling of aldehydes, secondary amines and alkynes (A³ coupling reaction). Using novel nanoscale materials, the current green, practical and economical method leads to short reaction times and high yields. The biosynthesized catalyst was also successfully employed in the Sonogashira cross-coupling reactions of various aryl halides with phenylacetylene. The best performance was observed using just 20 mg of the catalyst and ethanol as a green solvent. The developed protocol provides easy workup, short reaction times and good to excellent product yields. Furthermore, since the composite is highly stable, an external permanent magnet can be easily used for separating the catalyst. Thus, the catalyst can be recycled several times without considerable loss of catalytic activity.     

Immobilized palladium on modified magnetic nanoparticles and study of its catalytic activity in suzuki–miyaura C–C coupling reaction

A new magnetically reusable nanosolid, Fe₃O₄@PPCA@Pd(0) (PPCA = piperidine‐4‐carboxylic acid), as a versatile and highly effective catalyst was fabricated and characterized using transmission and scanning electron microscopies, X‐ray diffraction, thermogravimetric analysis, Fourier transform infrared and energy‐dispersive spectroscopies and vibrating sample magnetometry. This nanosolid shows great catalytic activity for the synthesis of biphenyl compounds in short reaction times and with high yields. The magnetic character of this catalyst allows retrieval and multiple uses without appreciable loss of its catalytic activity. Our system not only solves the basic problems of catalyst separation and recovery, but also the reactions can be performed in green media. Copyright © 2016 John Wiley & Sons, Ltd.     

Cu(II)–Schiff base complex‐functionalized magnetic Fe3O4 nanoparticles: a heterogeneous catalyst for various oxidation reactions

Cu(II)–Schiff base complex‐functionalized magnetic Fe₃O₄ nanoparticles were prepared and characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy techniques. This compound acts as a highly active and selective catalyst for the oxidation of sulfides and thiols. These reactions can be carried out in ethanol or solvent‐free conditions in the presence of hydrogen peroxide with complete selectivity and very high conversion under mild reaction conditions. The designed catalytic system prevents effectively the over‐oxidation of sulfides to sulfones. Separation and recycling can also be easily done using a simple magnetic separation process. Copyright © 2015 John Wiley & Sons, Ltd.     

Anchoring Ni (II) on Fe3O4@tryptophan: A recyclable,green and extremely efficient magnetic nanocatalyst for one‐pot synthesis of 5‐substituted 1H‐tetrazoles and chemoselective oxidation of sulfides and thiols

A green, novel and extremely efficient nanocatalyst was successfully synthesized by the immobilization of Ni as a transition metal on Fe₃O₄ nanoparticles coated with tryptophan. This nanostructured material was characterized using Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, thermogravimetric analysis, inductively coupled plasma optical emission spectroscopy, vibrating sample magnetometry and X‐ray diffraction. The prepared nanocatalyst was applied for the oxidation of sulfides, oxidative coupling of thiols and synthesis of 5‐substituted 1H‐tetrazoles. The use of non‐toxic, green and inexpensive materials, easy separation of magnetic nanoparticles from a reaction mixture using a magnetic field, efficient and one‐pot synthesis, and high yields of products are the most important advantages of this nanocatalyst.     

Improvement on physical properties of polyethersulfone membranes modified by poly(1‐vinylpyrrolidone) grafted magnetic Fe3O4@SiO2 nanoparticles

Polyethersulfone (PES) and poly(1‐vinylpyrrolidone) (PVP) were used to prepare ultrafiltration membranes with grafted Fe₃O₄ magnetic nanoparticles (PVP‐g‐Fe₃O₄@SiO₂). The structure of synthesized PVP‐g‐Fe₃O₄@SiO₂ was confirmed by FT‐IR and SEM analysis. Physical properties of blend membranes such as thermal resistance, Tensile strength, water uptake, and hydrophilicity were also investigated. Blended membranes of PES/PVP‐g‐Fe₃O₄@SiO₂ have exhibited higher thermal resistance due to increasing the modified nanoparticle content. The hydrophilicity of the synthesized PES/PVP‐g‐Fe₃O₄@SiO₂ membranes also improved by increasing the PVP‐g‐Fe₃O₄@SiO₂ content. As expected, increasing the hydrophilicity of blended membrane, caused enhancement of fouling resistance in membranes. Results showed that the content of PVP‐g‐Fe₃O₄@SiO₂ has different effects on the properties of synthesized composite membranes. Despite increasing the content of PVP‐g‐Fe₃O₄@SiO₂ has a negative effect on elongation, positive effects on maximum stress was observed. Moreover, the water uptake of synthesized membranes was significantly enhanced in comparison to other similar studies.     

New metal complexes supported on Fe3O4 magnetic nanoparticles as recoverable catalysts for selective oxidation of sulfides to sulfoxides

Fe₃O₄ nanoparticles were coated with aminopropyltriethoxysilane and subsequently reacted with isatin to obtain imine‐bonded Fe₃O₄ nanoparticles. The addition of ZrOCl₂?8H₂O or CuCl₂ led to the formation of complexes of Zr(IV)/isatin@Fe₃O₄ or Cu (II)/isatin@Fe₃O₄ as new magnetically separable catalysts. The synthesized catalysts were characterized using various techniques. These catalysts are shown to be efficient for chemo‐selective oxidation of sulfides to sulfoxides using hydrogen peroxide as oxidative agent. This system has many advantages, such as excellent level of reusability of magnetic catalysts, high yields, simplicity of separation of catalysts using an external magnet, environmental benignity and ease of handling. Copyright © 2016 John Wiley & Sons, Ltd.