Graphene‐Assisted Room‐Temperature Synthesis of 2D Nanostructured Hybrid Electrode Materials: Dramatic Acceleration of the Formation Rate of 2D Metal Oxide Nanoplates Induced by Reduced Graphene Oxide Nanosheets

A new prompt room temperature synthetic route to 2D nanostructured metal oxide–graphene‐hybrid electrode materials can be developed by the application of colloidal reduced graphene oxide (RGO) nanosheets as an efficient reaction accelerator for the synthesis of δ‐MnO₂ 2D nanoplates. Whereas the synthesis of the 2D nanostructured δ‐MnO₂ at room temperature requires treating divalent manganese compounds with persulfate ions for at least 24 h, the addition of RGO nanosheet causes a dramatic shortening of synthesis time to 1 h, underscoring its effectiveness for the promotion of the formation of 2D nanostructured metal oxide. To the best of our knowledge, this is the first example of the accelerated synthesis of 2D nanostructured hybrid material induced by the RGO nanosheets. The observed acceleration of nanoplate formation upon the addition of RGO nanosheets is attributable to the enhancement of the oxidizing power of persulfate ions, the increase of the solubility of precursor MnCO₃, and the promoted crystal growth of δ‐MnO₂ 2D nanoplates. The resulting hybridization between RGO nanosheets and δ‐MnO₂ nanoplates is quite powerful not only in increasing the surface area of manganese oxide nanoplate but also in enhancing its electrochemical activity. Of prime importance is that the present δ‐MnO₂–RGO nanocomposites show much superior electrode performance over most of 2D nanostructured manganate systems including a similar porous assembly of RGO and layered MnO₂ nanosheets. This result underscores that the present RGO‐assisted solution‐based synthesis can provide a prompt and scalable method to produce nanostructured hybrid electrode materials.     

The Hybrid of Gold Nanoparticles and 3D Flower‐like MnO2 Nanostructure with Enhanced Activity for Detection of Hydrogen Peroxide

3D Flower‐like manganese dioxide (MnO₂) nanostructure with the ability of catalysis for hydrogen peroxide (H₂O₂) and super large area that can support gold nanoparticles (AuNPs) with enhanced activity of electron transfer have been developed. The nanostructure of hybrids was prepared by directly mixing citric‐capped AuNPs and 3‐aminopropyltriethoxysilane (3‐APTES)‐capped nano‐MnO₂ using an electrostatic adsorption strategy. The Au‐MnO₂ composite was extensively characterized by scanning electron microscope (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), the Brunauer‐Emmett‐Teller (BET) method and X‐ray photoemission spectroscopy (XPS). Electrochemical properties were evaluated through cyclic voltammetry (CV) and amperometric method. The prepared sensor showed excellent electrochemical properties towards H₂O₂ with a wide linear range from 2.5×10⁻³∼1.39 mM and 3.89∼13.89 mM. The detection limit is 0.34 μM (S/N=3) with the sensitivities of 169.43 μA mM⁻¹ cm⁻² and 55.72 μA mM⁻¹ cm⁻². The detection of real samples was also studied. The result exhibited that the prepared sensor can be used for H₂O₂ detection in real samples.     

A Smart Photosensitizer–Manganese Dioxide Nanosystem for Enhanced Photodynamic Therapy by Reducing Glutathione Levels in Cancer Cells

Photodynamic therapy (PDT) has been applied in cancer treatment by utilizing reactive oxygen species to kill cancer cells. However, a high concentration of glutathione (GSH) is present in cancer cells and can consume reactive oxygen species. To address this problem, we report the development of a photosensitizer–MnO₂ nanosystem for highly efficient PDT. In our design, MnO₂ nanosheets adsorb photosensitizer chlorin e6 (Ce6), protect it from self‐destruction upon light irradiation, and efficiently deliver it into cells. The nanosystem also inhibits extracellular singlet oxygen generation by Ce6, leading to fewer side effects. Once endocytosed, the MnO₂ nanosheets are reduced by intracellular GSH. As a result, the nanosystem is disintegrated, simultaneously releasing Ce6 and decreasing the level of GSH for highly efficient PDT. Moreover, fluorescence recovery, accompanied by the dissolution of MnO₂ nanosheets, can provide a fluorescence signal for monitoring the efficacy of delivery.     

In Situ Growth of MnO2 Nanosheets on N‐Doped Carbon Nanotubes Derived from Polypyrrole Tubes for Supercapacitors

Nitrogen‐doped porous carbon nanotubes@MnO₂ (N‐CNTs@MnO₂) nanocomposites are prepared through the in situ growth of MnO₂ nanosheets on N‐CNTs derived from polypyrrole nanotubes (PNTs). Benefiting from the synergistic effects between N‐CNTs (high conductivity and N doping level) and MnO₂ nanosheets (high theoretical capacity), the as‐prepared N‐CNTs@MnO₂‐800 nanocomposites show a specific capacitance of 219 F g^?1 at a current density of 1.0 A g^?1, which is higher than that of pure MnO₂ nanosheets (128 F g^?1) and PNTs (42 F g^?1) in 0.5 m Na₂SO₄ solution. Meanwhile, the capacitance retention of 86.8 % (after 1000 cycles at 10 A g^?1) indicates an excellent electrochemical performance of N‐CNTs@MnO₂ prepared in this work.     

LSPR增强0D/2DCdS/MoO3-xS型异质结的构建及其可见光光催化活性研究

近年来,等离子体半导体光催化剂因其具有从可见光到近红外光的光响应而引起了人们极大的研究兴趣.含有丰富氧空位的非化学计量的氧化钼(MoO3-x)具有中心位于700 nm和尾部吸收拓展至2000 nm强的局域表面等离子体共振(LSPR)效应,因此,MoO3-x或将成为实现全光谱响应光催化制氢技术最有吸引力的候选材料之一.然而,单一MoO3-x中电荷载流子的复合快速.具有II型、Z型或S型异质结构的MoO3-x基复合光催化剂的构建被证明是同时实现拓展光吸收和分离光生载流子改善光催化析氢性能的有效策略.与传统的Ⅱ型异质结构相比,Z型或S型可在较高还原电位上进行水分解反应,又可以实现光生载流子的有效分离.相比于Z型,S型由于内部电场导致的半导体的能带玩去可以进一步缩短电子与空穴之间的迁移距离,从而导致光诱导载流子的更快分离.基于此,本文选择了与MoO3-x能带匹配的CdS半导体催化剂,通过简单的共沉淀法在具有LSPR效应的二维(2D)MoO3-x椭圆纳米片上生长零维(0D)CdS纳米粒子,制备了LSPR增强的0D/2D CdS/MoO3-xS型异质结.由于MoO3-x的引入,0D/2D CdS/MoO3-x复合材料展现出了一个因LSPR效应而具有的从600到1400 nm的尾部吸收,并且这种尾部吸收强度随着复合材料中MoO3-x含量的增加而增加.在可见光光催化反应中,CdS/MoO3-x复合材料的产氢速率为7.44 mmol·g^-1·h^-1,为单一CdS的10.3倍.当采用不同波段的单色光作为激发光源,在420,450和550 nm单色光的照射下,CdS/MoO3-x复合材料的产氢效率为15.7,10.9和193.4 mmol·g^-1,分别比CdS高6.8,5.0和3倍.当激发波长拓展至650 nm时,CdS/MoO3-x复合材料的产氢效率为6.83 mmol·g^-1,而CdS则不具有产氢活性,侧面体现了MoO3-x的LSPR效应在提升光解水产氢活性方向的有效作用.我们利用肖特基和固体紫外测试确定了CdS和MoO3-x的能带结构,并通过第一原理密度泛函理论模拟计算了CdS和MoO3-x的功函数,分别为4.07和7.56 eV,当这两个半导体接触时,MoO3-x的费米能级比CdS的更负,电子将从CdS迁移到MoO3-x,因此CdS和MoO3-x的能带将分别向上和向下弯曲,直到其费米能级达到平衡.这种向上和向下的带弯曲是S型结构的特征之一.XPS分析也证实在带正电荷的CdS和带负电荷的MoO3-x之间会产生内部电场,这也符合S型结构.此外,还利用电子自旋共振(ESR)进一步研究了CdS,MoO3-x和CdS/MoO3-x在光照下自由基的产生情况,CdS/MoO3-x产生的DMPO-·O2?和DMPO-·OH信号强度均强于CdS和MoO3-x,证明CdS/MoO3-x能产生更多的·O2?和·OH自由基.ESR结果还表明,在CdS/MoO3-x复合材料中光诱导电子和空穴仍然分别停留在CdS的导带和MoO3-x的价带中,CdS/MoO3-x复合材料的光诱导电荷分离机制将遵循S型机制,而不是传统的II型异质结.在光照下,内部电场和弯曲能带促使积聚在MoO3-x导带上的电子与CdS的空穴结合,在CdS的导带上留下具有较强氧化还原能力的电子参与光催化水还原反应,实现高效的光催化产氢.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

A Smart DNAzyme–MnO2 Nanosystem for Efficient Gene Silencing

DNAzymes hold promise for gene‐silencing therapy, but the lack of sufficient cofactors in the cell cytoplasm, poor membrane permeability, and poor biostability have limited the use of DNAzymes in therapeutics. We report a DNAzyme–MnO₂ nanosystem for gene‐silencing therapy. MnO₂ nanosheets adsorb chlorin e6‐labelled DNAzymes (Ce6), protect them from enzymatic digestion, and efficiently deliver them into cells. The nanosystem can also inhibit ¹O₂ generation by Ce6 in the circulatory system. In the presence of intracellular glutathione (GSH), MnO₂ is reduced to Mn²⁺ ions, which serve as cofactors of 10–23 DNAzyme for gene silencing. The release of Ce6 generates ¹O₂ for more efficient photodynamic therapy. The Mn²⁺ ions also enhance magnetic resonance contrast, providing GSH‐activated magnetic resonance imaging (MRI) of tumor cells. The integration of fluorescence recovery and MRI activation provides fluorescence/MRI bimodality for monitoring the delivery of DNAzymes.     

Preparation and Pb (II) adsorption in aqueous of 2D/2D g‐C3N4/MnO2 composite

A novel g‐C₃N₄/MnO₂ composite was prepared by in situ deposition of MnO₂ on graphitic carbon nitride (g‐C₃N₄) nanosheets, and its adsorption properties were evaluated for removal of Pb (II) in aqueous. Fourier transform‐infrared, spectrometer scanning electron microscopy and transmission electron microscopy characterization showed the g‐C₃N₄/MnO₂ composite had a two‐dimensional/two‐dimensional (2D/2D) structure with ample active sites. The Brunauer–Emmett–Teller specific surface area of g‐C₃N₄/MnO₂ composites (234.9 m²/g) was 13.5 times larger than that of g‐C₃N₄ (17.37 m²/g), providing better conditions for adsorption. The adsorption kinetic data were better fitted with the pseudo‐second‐order model. The Langmuir model was more suitable for describing the experimental equilibrium data of g‐C₃N₄/MnO₂, and the maximum adsorption capacity was 204.1 mg/g for Pb (II). The adsorption of g‐C₃N₄/MnO₂ composite for Pb (II) was an endothermic and spontaneous process, and reached adsorption equilibrium rapidly within initial 150 min. This composite was an excellent adsorbent because of its higher adsorption capacity and facile preparation progress.     

Size Fractionation of Two‐Dimensional Sub‐Nanometer Thin Manganese Dioxide Crystals towards Superior Urea Electrocatalytic Conversion

A universal technique has been proposed to sort two‐dimensional (2D) sub‐nanometer thin crystals (manganese dioxide MnO₂ and molybdenum disulfide MoS₂) according to their lateral dimensions. This technique is based on tuning the zeta potential of their aqueous dispersions which induces the selective sedimentation of large‐sized 2D crystals and leaves the small‐sized counterparts in suspension. The electrocatalytic properties of as‐obtained 2D ultrathin crystals are strongly dependent on their lateral size. As a proof‐of‐concept study, the small‐sized MnO₂ nanocrystals were tested as the electrocatalysts for the urea‐oxidation reaction (UOR), which showed outstanding performance in both half reaction and full electrolytic cell. A mechanism study reveals the enhanced performance is associated with the remarkable structural properties of MnO₂ including ultrathin (ca. 0.95 nm), laterally small‐sized (50–200 nm), and highly exposed active centers.     

Coaxial Carbon/MnO2 Hollow Nanofibers as Sulfur Hosts for High‐Performance Lithium‐Sulfur Batteries

Lithium‐sulfur (Li‐S) batteries have recently attracted a large amount of attention as promising candidates for next‐generation high‐power energy storage devices because of their high theoretical capacity and energy density. However, the shuttle effect of polysulfides and poor conductivity of sulfur are still vital issues that constrain their specific capacity and cyclic stability. Here, we design coaxial MnO₂‐graphitic carbon hollow nanofibers as sulfur hosts for high‐performance lithium‐sulfur batteries. The hollow C/MnO₂ coaxial nanofibers are synthesized via electrospinning and carbonization of the carbon nanofibers (CNFs), followed by an in situ redox reaction to grow MnO₂ nanosheets on the surface of CNFs. The inner graphitic carbon layer not only maintains intimate contact with sulfur and outer MnO₂ shell to significantly increase the overall electrical conductivity but also acts as a protective layer to prevent dissolution of polysulfides. The outer MnO₂ nanosheets restrain the shuttle effect greatly through chemisorption and redox reaction. Therefore, the robust S@C/MnO₂ nanofiber cathode delivers an extraordinary rate capability and excellent cycling stability with a capacity decay rate of 0.044 and 0.051 % per cycle after 1000 cycles at 1.0 C and 2.0 C, respectively. Our present work brings forward a new facile and efficient strategy for the functionalization of inorganic metal oxide on graphitic carbons as sulfur hosts for high performance Li‐S batteries.     

Accurate Control of VS2 Nanosheets for Coexisting High Photoluminescence and Photothermal Conversion Efficiency

In two‐dimensional (2D) amorphous nanosheets, the electron–phonon coupling triggered by localization of the electronic state as well as multiple‐scattering feature make it exhibit excellent performance in optical science. VS₂ nanosheets, especially single‐layer nanosheets with controllable electronic structure and intrinsic optical properties, have rarely been reported owing to the limited preparation methods. Now, a controllable and feasible switching method is used to fabricate 2D amorphous VS₂ and partial crystallized 2D VO₂(D) nanosheets by altering the pressure and temperature of supercritical CO₂ precisely. Thanks to the strong carrier localization and the quantum confinement, the unique 2D amorphous structures exhibit full band absorption, strong photoluminescence, and outstanding photothermal conversion efficiency.     

Ultrathin FeSe2 Nanosheets: Controlled Synthesis and Application as a Heterogeneous Catalyst in Dye‐Sensitized Solar Cells

Two‐dimensional (2D) semiconducting nanosheets have emerged as an important field of materials, owing to their unique properties and potential applications in areas ranging from electronics to catalysis. However, the controlled synthesis of ultrathin 2D nanosheets remains a great challenge, due to the lack of an intrinsic driving force for anisotropic growth. High‐quality ultrathin 2D FeSe₂ nanosheets with average thickness below 7 nm have been synthesized on large scale by a facile solution method, and a formation mechanism has been proposed. Due to their favorable structural features, the as‐synthesized ultrathin FeSe₂ nanosheets exhibit excellent electrocatalytic activity for the reduction of triiodide to iodide and low charge‐transfer resistance at the electrolyte–electrode interface in dye‐sensitized solar cells (DSSCs). The DSSCs with FeSe₂ nanosheets as counter electrode material achieve a high power conversion efficiency of 7.53 % under a simulated solar illumination of 100 mW cm^?2 (AM 1.5), which is comparable with that of Pt‐based devices (7.47 %).     

Hollow Carbon Nanofibers Filled with MnO2 Nanosheets as Efficient Sulfur Hosts for Lithium–Sulfur Batteries

Lithium–sulfur batteries have been investigated as promising electrochemical‐energy storage systems owing to their high theoretical energy density. Sulfur‐based cathodes must not only be highly conductive to enhance the utilization of sulfur, but also effectively confine polysulfides to mitigate their dissolution. A new physical and chemical entrapment strategy is based on a highly efficient sulfur host, namely hollow carbon nanofibers (HCFs) filled with MnO₂ nanosheets. Benefiting from both the HCFs and birnessite‐type MnO₂ nanosheets, the MnO₂@HCF hybrid host not only facilitates electron and ion transfer during the redox reactions, but also efficiently prevents polysulfide dissolution. With a high sulfur content of 71 wt % in the composite and an areal sulfur mass loading of 3.5 mg cm^?2 in the electrode, the MnO₂@HCF/S electrode delivered a specific capacity of 1161 mAh g^?1 (4.1 mAh cm^?2) at 0.05 C and maintained a stable cycling performance at 0.5 C over 300 cycles.     

Periodic Current Oscillation Catalyzed by δ‐MnO2 Nanosheets

The oxygen evolution reaction (OER) is of wide interest for both fuel and hydrometallurgy applications. Different types of nanoscale MnO₂, varying from nanosheets to nanoneedles, are synthesized and assembled on the anode to investigate their catalytic effect on the nonlinear kinetics of the MnO₂‐catalyzed OER at high current. For δ‐MnO₂ nanosheets, periodic current oscillations (PCO) occurr and occupy up to 40 % of the total energy consumption. The PCO can help to reduce the energy consumption under constant current conditions. Its amplitude could be twice of that for the previously reported MnO₂ grown by an in situ electrochemical method. If the amount of γ‐MnO₂ nanoneedles increases, the oscillation disappears. For different Mn oxides, the rate constants of H₂O₂ decomposition differ, resulting in changes in oscillation features. The results of this study may enable new ideas to improve the efficiency of industrial electrolysis and charging–discharging of supercapacitors.     

Unlocking the Electrocatalytic Activity of Antimony for CO2 Reduction by Two‐Dimensional Engineering of the Bulk Material

Two‐dimensional (2D) materials are known to be useful in catalysis. Engineering 3D bulk materials into the 2D form can enhance the exposure of the active edge sites, which are believed to be the origin of the high catalytic activity. Reported herein is the production of 2D “few‐layer” antimony (Sb) nanosheets by cathodic exfoliation. Application of this 2D engineering method turns Sb, an inactive material for CO₂ reduction in its bulk form, into an active 2D electrocatalyst for reduction of CO₂ to formate with high efficiency. The high activity is attributed to the exposure of a large number of catalytically active edge sites. Moreover, this cathodic exfoliation process can be coupled with the anodic exfoliation of graphite in a single‐compartment cell for in situ production of a few‐layer Sb nanosheets and graphene composite. The observed increased activity of this composite is attributed to the strong electronic interaction between graphene and Sb.     

Understanding the Role of Gold Nanoparticles in Enhancing the Catalytic Activity of Manganese Oxides in Water Oxidation Reactions

The Earth‐abundant and inexpensive manganese oxides (MnO_x) have emerged as an intriguing type of catalysts for the water oxidation reaction. However, the overall turnover frequencies of MnO_x catalysts are still much lower than that of nanostructured IrO₂ and RuO₂ catalysts. Herein, we demonstrate that doping MnO_x polymorphs with gold nanoparticles (AuNPs) can result in a strong enhancement of catalytic activity for the water oxidation reaction. It is observed that, for the first time, the catalytic activity of MnO_x/AuNPs catalysts correlates strongly with the initial valence of the Mn centers. By promoting the formation of Mn³⁺ species, a small amount of AuNPs (<5 %) in α‐MnO₂/AuNP catalysts significantly improved the catalytic activity up to 8.2 times in the photochemical and 6 times in the electrochemical system, compared with the activity of pure α‐MnO₂.     

Composition‐Tailored 2 D Mn1−xRuxO2 Nanosheets and Their Reassembled Nanocomposites: Improvement of Electrode Performance upon Ru Substitution

Composition‐tailored Mn_1?xRu_xO₂ 2 D nanosheets and their reassembled nanocomposites with mesoporous stacking structure are synthesized by a soft‐chemical exfoliation reaction and the subsequent reassembling of the exfoliated nanosheets with Li⁺ cations, respectively. The tailoring of the chemical compositions of the exfoliated Mn_1?xRu_xO₂ 2 D nanosheets and their lithiated nanocomposites can be achieved by adopting the Ru‐substituted layered manganese oxides as host materials for exfoliation reaction. Upon the exfoliation–reassembling process, the substituted ruthenium ions remain stabilized in the layered Mn_1?xRu_xO₂ lattice with mixed Ru³⁺/Ru⁴⁺ oxidation state. The reassembled Li–Mn_1?xRu_xO₂ nanocomposites show promising pseudocapacitance performance with large specific capacitances of approximately 330 F g^?1 for the second cycle and approximately 360 F g^?1 for the 500th cycle and excellent cyclability, which are superior to those of the unsubstituted Li–MnO₂ homologue and many other MnO₂‐based materials. Electrochemical impedance spectroscopy analysis provides strong evidence for the enhancement of the electrical conductivity of 2 D nanostructured manganese oxide upon Ru substitution, which is mainly responsible for the excellent electrode performance of Li–Mn_1?xRu_xO₂ nanocomposites. The results underscore the powerful role of the composition‐controllable metal oxide 2 D nanosheets as building blocks for exploring efficient electrode materials.     

Synthesis of Two‐dimensional Microporous Carbonaceous Polymer Nanosheets and Their Application as High‐performance CO2 Capture Sorbent

The synthesis of two‐dimensional (2D) polymer nanosheets with a well‐defined microporous structure remains challenging in materials science. Here, a new kind of 2D microporous carbonaceous polymer nanosheets was synthesized through polymerization of a very low concentration of 1,4‐dicyanobenzene in molten zinc chloride at 400–500 °C. This type of nanosheets has a thickness in the range of 3–20 nm, well‐defined microporosity, a high surface area (～537 m² g^?1), and a large micropore volume (～0.45 cm³ g^?1). The microporous carbonaceous polymer nanosheets exhibit superior CO₂ sorption capability (8.14 wt % at 298 K and 1 bar) and a relatively high CO₂ selectivity toward N₂ (25.6). Starting from different aromatic nitrile monomers, a variety of 2D carbonaceous polymer nanosheets can be obtained showing a certain universality of the ionothermal method reported herein.     

Ultrathin Hexagonal Hybrid Nanosheets Synthesized by Graphene Oxide‐Assisted Exfoliation of β‐Co(OH)2 Mesocrystals

In the present study, we report the synthesis of a high‐quality, single‐crystal hexagonal β‐Co(OH)₂ nanosheet, exhibiting a thickness down to ten atomic layers and an aspect ratio exceeding 900, by using graphene oxide (GO) as an exfoliant of β‐Co(OH)₂ nanoflowers. Unlike conventional approaches using ionic precursors in which morphological control is realized by structure‐directing molecules, the β‐Co(OH)₂ flower‐like superstructures were first grown by a nanoparticle‐mediated crystallization process, which results in large 3D superstructure consisting of ultrathin nanosheets interspaced by polydimethoxyaniline (PDMA). Thereafter, β‐Co(OH)₂ nanoflowers were chemically exfoliated by surface‐active GO under hydrothermal conditions into unilamellar single‐crystal nanosheets. In this reaction, GO acts as a two‐dimensional (2D) amphiphile to facilitate the exfoliation process through tailored interactions between organic and inorganic molecules. Meanwhile, the on‐site conjugation of GO and Co(OH)₂ promotes the thermodynamic stability of freestanding ultrathin nanosheets and restrains further growth through Oswald ripening. The unique 2D structure combined with functionalities of the hybrid ultrathin Co(OH)₂ nanosheets on rGO resulted in a remarkably enhanced lithium‐ion storage performance as anode materials, maintaining a reversible capacity of 860 mA h g^?1 for as many as 30 cycles. Since mesocrystals are ubiquitous and rich in morphological diversity, the strategy of the GO‐assisted exfoliation of mesocrystals developed here provides an opportunity for the synthesis of new functional nanostructures that could bear importance in clean renewable energy, catalysis, photoelectronics, and photonics.     

Synthesis and Localized Photoluminescence Blinking of Lead‐Free 2D Nanostructures of Cs3Bi2I6Cl3 Perovskite

Two‐dimensional (2D) lead‐free halide perovskites have generated enormous perception in the field of optoelectronics due to their fascinating optical properties. However, an in‐depth understanding on their shape‐controlled charge‐carrier recombination dynamics is still lacking, which could be resolved by exploring the photoluminescence (PL) blinking behaviour at the single‐particle level. Herein, we demonstrate, for the first time, the synthesis of nanocrystals (NCs) and 2D nanosheets (NSs) of layered mixed halide, Cs₃Bi₂I₆Cl₃, by solution‐based method. We applied fluorescence microscopy and super‐resolution optical imaging at single‐particle level to investigate their morphology‐dependent PL properties. Narrow emission line widths and passivation of non‐radiative defects were evidenced for 2D layered nanostructures, whereas the activation of shallow trap states was recognized at 77 K. Interestingly, individual NCs were found to display temporal intermittency (blinking) in PL emission. On the other hand, NS showed temporal PL intensity fluctuations within localized domains of the crystal. In addition, super‐resolution optical image of the NS from localization‐based method showed spatial inhomogeneity of the PL intensity within perovskite crystal.