Highly dispersed copper/ppm palladium nanoparticles as novel magnetically recoverable catalyst for Suzuki reaction under aqueous conditions at room temperature

An efficient procedure based on arginine‐modified Fe₃O₄@carbon magnetic nanoparticles (FCA MNPs) with highly dispersed copper nanoparticles (Cu NPs) and 92.8 ppm of Pd is reported for room temperature Suzuki reaction. For enhancing the activity of this Cu‐based heterogeneous catalyst, special arginine amino acid as a ligand with high content of heteroatoms was immobilized onto the Fe₃O₄@carbon MNPs to increase the electron density. Cu(II) ions were then loaded on the surface of the FCA MNPs and reduced to achieve uniformly dispersed Cu NPs. An aqueous mixture of metal hydroxides such as KOH, Ba(OH)₂, Ca(OH)₂, Mg(OH)₂ as a green, non‐toxic and basic medium was used for the Suzuki reaction at room temperature. This catalyst could also be recovered and reused with no loss of activity over six successful runs.     

Uniformly dispersed copper nanoparticles onto the modified magnetically recoverable nanocatalyst for aqueous synthesis of primary amides

Magnetically recoverable and environmentally friendly Cu‐based heterogeneous catalyst has been synthesized for the one‐pot conversion of aldehydes to their corresponding primary amides. The Fe₃O₄@SiO₂ nanocomposites were prepared by synthesis of Fe₃O₄ magnetic nanoparticles (MNPs) which was then coated with a silica shell via Stöber method. Bi‐functional cysteine amino acid was covalently bonded onto the siliceous shell of nanocatalyst. The Cu^II ions were then loaded onto the modified surface of nanocatalyst. Finally, uniformly dispersed copper nanoparticles were achieved by reduction of Cu^II ions with NaBH₄. Amidation reaction of aryl halides with electron‐withdrawing or electron‐donating groups and hydroxylamine hydrochloride catalyzed with Fe₃O₄@SiO₂@Cysteine‐copper (FSC‐Cu) MNPs in aqueous condition gave an excellent yield of products. The FSC‐Cu MNPs could be easily isolated from the reaction mixture with an external magnet and reused at least 8 times without significant loss in activity.     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

Research on WPU‐RGO/ATP‐Fe3O4/chitosan composites with excellent electrical and magnetic properties

First, attapulgite‐Fe₃O₄ magnetic filler (ATP‐Fe₃O₄) was prepared by using a chemical precipitation method. Subsequently, graphite oxide (GO) was prepared through Hummer method, and then reduced GO (RGO) was prepared through GO reduced by chitosan (CS). Finally, a series of WPU‐RGO/ATP‐Fe₃O₄/CS composites were prepared by introduced RGO/ATP‐Fe₃O₄/CS to waterborne polyurethane. The structure and properties were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometry (VSM), thermogravimetric analysis TGA, conductivity test, and tensile test. The experimental results indicated that thermal stability and tensile strength of nanocomposites were improved with the increase of the content of RGO/ATP‐Fe₃O₄/CS. Meanwhile, with the increase of the RGO/ATP‐Fe₃O₄/CS content, the electrical and magnetic properties of WPU‐RGO/ATP‐Fe₃O₄/CS composites were improved. When the content of RGO/ATP‐Fe₃O₄/CS was 8 wt%, the electrical conductivity and the saturation magnetic strength of WPU‐RGO/ATP‐Fe₃O₄/CS composites were 3.1 × 10^?7 S·cm^?1 and 1.38 emu/g, respectively. WPU‐RGO/ATP‐Fe₃O₄/CS composites have excellent electrical and magnetic properties.     

Supercritical Carbon Dioxide Assisted Deposition of Fe3O4 Nanoparticles on Hierarchical Porous Carbon and Their Lithium‐Storage Performance

A composite of highly dispersed Fe₃O₄ nanoparticles (NPs) anchored in three‐dimensional hierarchical porous carbon networks (Fe₃O₄/3DHPC) as an anode material for lithium‐ion batteries (LIBs) was prepared by means of a deposition technique assisted by a supercritical carbon dioxide (scCO₂)‐expanded ethanol solution. The as‐synthesized Fe₃O₄/3DHPC composite exhibits a bimodal porous 3D architecture with mutually connected 3.7 nm mesopores defined in the macroporous wall on which a layer of small and uniform Fe₃O₄ NPs was closely coated. As an anode material for LIBs, the Fe₃O₄/3DHPC composite with 79 wt % Fe₃O₄ (Fe₃O₄/3DHPC‐79) delivered a high reversible capacity of 1462 mA h g^?1 after 100 cycles at a current density of 100 mA g^?1, and maintained good high‐rate performance (728, 507, and 239 mA h g^?1 at 1, 2, and 5 C, respectively). Moreover, it showed excellent long‐term cycling performance at high current densities, 1 and 2 A g^?1. The enhanced lithium‐storage behavior can be attributed to the synergistic effect of the porous support and the homogeneous Fe₃O₄ NPs. More importantly, this straightforward, highly efficient, and green synthetic route will definitely enrich the methodologies for the fabrication of carbon‐based transition‐metal oxide composites, and provide great potential materials for additional applications in supercapacitors, sensors, and catalyses.     

Preparation of chitosan functionalized end‐capped Ag‐NPs and composited with Fe3O4‐NPs: Controlled release to pH‐responsive delivery of progesterone and antibacterial activity against pseudomonas aeruginosa (PAO‐1)

In this work, functionalized chitosan end‐capped Ag nanoparticles (NPs) and composited with Fe₃O₄‐NPs was prepared as pH‐responsive controlled release carrier for gastric‐specific drug delivery. The structure of prepared material was characterized by FE‐SEM, XRD, EDS and FT‐IR analysis. The loading behavior of the progesterone onto this novel material was studied in aqueous medium at 25°C and their release was followed spectrophotometrically at 37°C in seven different buffer solutions (pH 1.2, 2.2, 3.2, 4.2, 5.2, 6.2 and 7.2) to simulate intestine and gastric media which experimental results reveal more release rate in pH 1.2 (gastric medium) with respect to other buffers. This observation is attributed to dependency of the CS‐IMBDO‐Ag‐Fe₃O₄‐NPs and progesterone structure with buffer pH that candidate this new material as prospective pH‐sensitive carrier for gastric‐targeted drug delivery. On the other hand, the antibacterial properties of this material against gram‐negative bacterium pseudomonas aeruginosa (PAO‐1) in agar plates was studied and accordingly based on broth micro dilution the minimum bactericidal concentration (MBC) and minimum inhibitory concentration (MIC) with respect to standard CLSI in different concentrations of CS‐IMBDO‐Ag‐Fe₃O₄‐NPs was calculated. The results reveal that MIC and MBC values are 50 and 1250 μg/mL, respectively. In addition, extracts of Portulaca oleracea leaves was prepared and its antibacterial activity in single and binary system with CS‐IMBDO‐Ag‐Fe₃O₄‐NPs as synergies effect against PAO‐1 was tested and results shown that these materials have significant synergistic effect for each other.     

Iron oxide nanoparticles coated with green tea extract as a novel magnetite reductant and stabilizer sorbent for silver ions: Synthetic application of Fe3O4@green tea/Ag nanoparticles as magnetically separable and reusable nanocatalyst for reduction of 4‐nitrophenol

Green tea extract having many phenolic hydroxyl and carbonyl functional groups in its molecular framework can be used in the modification of Fe₃O₄ nanoparticles. Moreover, the feasibility of complexation of polyphenols with silver ions in aqueous solution can improve the surface properties and capacity of the Fe₃O₄@green tea extract nanoparticles (Fe₃O₄@GTE NPs) for sorption and reduction of silver ions. Therefore, the novel Fe₃O₄@GTE NPs nano‐sorbent has potential ability as both reducing and stabilizing agent for immobilization of silver nanoparticles to make a novel magnetic silver nanocatalyst (Fe₃O₄@GTE/Ag NPs). Inductively coupled plasma analysis, transmission and scanning electron microscopies, energy‐dispersive X‐ray and Fourier transform infrared spectroscopies, and vibrating sample magnetometry were used to characterize the catalyst. Fe₃O₄@GTE/Ag NPs shows high catalytic activity as a recyclable nanocatalyst for the reduction of 4‐nitrophenol at room temperature.     

Anodized Iron Oxide Nanostructures on Different Carbon Steels for Photoelectrochemical Water Splitting

In this study, two different nanostructural iron oxide films were prepared on two kinds of carbon steels (CS) with different contents of impurities via anodization in a mixture of aqueous ammonium fluoride solution and ethylene glycol, respectively, and apply to photoelectrochemical (PEC) water splitting. After annealing, iron oxide nanotubes (NTs) was coated on surface of lower purity CS and iron oxide nanoporous (NPs) was coated on surface of higher purity CS via scanning electron microscope. X‐ray diffraction pattern shows both of samples contain a major phase of α‐Fe₂O₃ and a slight phase of Fe₃O₄. Compared with NPs, NTs behaves better absorbance ability in visible spectra range via UV‐visible absorbance spectra. From PEC response, the iron oxide NTs showed higher water splitting performance (0.10 mA/cm² at 0.4 V vs. Ag/AgCl) than NPs (0.04 mA/cm² at 0.4 V vs. Ag/AgCl) due to better absorbance, higher car‐ rier concentration and low charge transfer resistance.     

磁性纳米Pd/Fe3O4催化剂的制备及其在Heck反应中的应用

通过使用聚乙烯吡咯烷酮作为稳定剂,合成了磁性Pd/Fe₃O₄纳米颗粒催化剂。对该催化剂进行粉末X射线衍射、透射电子显微镜、感应耦合等离子体和磁性表征。将Pd/Fe₃O₄催化剂用于Heck反应,检测其催化性能。测试结果表明Pd纳米颗粒负载在Fe₃O₄纳米颗粒上,而且催化剂的尺寸<20 nm,并在Heck反应中表现了极好的催化性能。此外,催化剂可以通过磁场回收利用, 且催化活性没有显著的降低。     

Cu‐Based Catalyst Resulting from a Cu,Zn,Al Hydrotalcite‐Like Compound: A Microstructural,Thermoanalytical, and In Situ XAS Study

A Cu‐based methanol synthesis catalyst was obtained from a phase pure Cu,Zn,Al hydrotalcite‐like precursor, which was prepared by co‐precipitation. This sample was intrinsically more active than a conventionally prepared Cu/ZnO/Al₂O₃ catalyst. Upon thermal decomposition in air, the [(Cu_0.5Zn_0.17Al_0.33)(OH)₂(CO₃)_0.17] ? mH₂O precursor is transferred into a carbonate‐modified, amorphous mixed oxide. The calcined catalyst can be described as well‐dispersed “CuO” within ZnAl₂O₄ still containing stabilizing carbonate with a strong interaction of Cu²⁺ ions with the Zn–Al matrix. The reduction of this material was carefully analyzed by complementary temperature‐programmed reduction (TPR) and near‐edge X‐ray absorption fine structure (NEXAFS) measurements. The results fully describe the reduction mechanism with a kinetic model that can be used to predict the oxidation state of Cu at given reduction conditions. The reaction proceeds in two steps through a kinetically stabilized Cu^I intermediate. With reduction, a nanostructured catalyst evolves with metallic Cu particles dispersed in a ZnAl₂O₄ spinel‐like matrix. Due to the strong interaction of Cu and the oxide matrix, the small Cu particles (7 nm) of this catalyst are partially embedded leading to lower absolute activity in comparison with a catalyst comprised of less‐embedded particles. Interestingly, the exposed Cu surface area exhibits a superior intrinsic activity, which is related to a positive effect of the interface contact of Cu and its surroundings.     

Synthesis of Fe3O4@SiO2-Au/Cu magnetic nanoparticles and its efficient catalytic performance for the Ullmann coupling reaction of bromamine acid

Over bimetallic Au/Cu catalyst supported on magnetic Fe₃O₄ nanoparticles, water-mediated bromamine acid could be selectively converted into 4,4'-diamino-1,1'-dianthraquinonyl-3,3'-disulfonic acid (DAS) with a yield of 88.67%. The magnetic catalyst could be readily separated and reused.     

Environmentally friendly and highly efficient synthesis of benzoxazepine and malonamide derivatives using HPA/TPI‐Fe3O4 nanoparticles as recoverable catalyst in aqueous media

A magnetic inorganic–organic nanohybrid material (HPA/TPI‐Fe₃O₄ NPs) was produced as an efficient, highly recyclable and eco‐friendly catalyst for the one‐pot multi‐component synthesis of malonamide and 2,3,4,5‐tetrahydrobenzo[b ][1,4]oxazepine derivatives with high yields in short reaction times (25–35 min) in aqueous media at room temperature. The nanohybrid catalyst was prepared by the chemical anchoring of H₆P₂W₁₈O₆₂ onto the surface of modified Fe₃O₄ nanoparticles (NPs) with N ‐[3‐(triethoxysilyl)propyl]isonicotinamide (TPI) linker. The magnetic recoverable catalyst was easily recycled at least ten times without any loss of catalytic activity.     

Assembly immobilized palladium(0) on carboxymethylcellulose/Fe3O4 hybrid: An efficient tailor‐made magnetically catalyst for the Suzuki–Miyaura couplings

The Pd nanoparticles (Pd NPs) embedded on magnetically retrievable carboxymethylcellulose/Fe₃O₄ (Pd⁰@CMC/Fe₃O₄) organic/inorganic hybrid were prepared via the conventional simple process. The presence of the hydroxyl and carboxyl groups within the framework of the magnetic hybrid enables the facile preparation and stabilization of Pd NPs in this organic/inorganic hybrid. This hybrid catalyst was very effective in the Suzuki – Miyaura reaction of a variety of aryl halides with arylboronic acid to afford excellent product yields. The catalyst showed good stability and could be easily recovered with an external magnetic field and reused for several times without a significant loss in its catalytic activity. Furthermore, the Pd⁰@CMC/Fe₃O₄ hybrid catalyst was fully characterized by UV–Vis, FT–IR, XRD, SEM, EDX, TEM, XPS and TGA techniques. The hot filtration test suggests that a homogeneous mechanism is operative in Suzuki – Miyaura reaction.     

Preparation and Characterization of Fe3O4/Ethiodized‐oil Magnetic Fluids Used in Arterial Embolization Hyperthermia

Fe₃O₄ nanoparticles (NPs) were prepared by the co‐precipitation of Fe³⁺ and Fe²⁺ with ammonium hydroxide, and were modified by four different surfactants. The modified Fe₃O₄ NPs were characterized by Fourier transform infrared spectroscopy, X‐ray powder diffraction, transmission electron microscopy and vibrating sample magnetometer. Then, the modified Fe₃O₄ NPs were dispersed in ethiodized‐oil by mechanical agitation and ultrasonic vibration to obtain stable Fe₃O₄/ethiodized‐oil magnetic fluids (MFs). The magnetic properties and rheological properties of the MFs were measured using a Gouy magnetic balance and a rotational rheometer, respectively. The saturation magnetization of the Fe₃O₄ modified by oleic acid was 52.1 emu/g. Furthermore, the result showed that the inductive heating effect of oleic acid stabilized Fe₃O₄/ethiodized‐oil MF was remarkable and it only took 650 s for the temperature rising from 25°C to 65°C. The specific absorption rate of the MF was 50.16 W/(g of Fe). It had a potential application in arterial embolization hyperthermia.     

POM‐Catalyzed In Situ Ligand Synthesis for the Construction of Metal Complexes and Their Use in the Formation of Coordination Polymers

Six organic–inorganic hybrid materials were synthesized by the in situ oxidation of neocuproine by using MoO₃/Na₂MoO₄ as the catalyst in the presence of Cu(NO₃)₂. The crystal structures of Mo8‐Cu4‐PHEN and Mo8‐Cu2‐5(2PIC) are composed of [Mo₈O₂₆]^4? polyoxometalate (POM) units, whereas the crystal structure of Mo6‐Cu‐COPHEN is composed of a [Mo₆O₁₉]^2? POM unit; both POM units could be considered as the active form of the catalyst. Reaction of the hybrid materials with 1,3,5‐benzenetricarboxylic acid (BTC) resulted in the formation of two different coordination polymers (CPs) under different reaction conditions. These CPs, depending on their structural attributes, exhibit distinct differences in the adsorption of H₂, CO₂, and water. The use of 2‐methylpyridine instead of neocuproine does not give any oxidation products under the same reaction conditions due to the incorrect positioning of the methyl group with respect to the Cu^II center.     

Novel synthesis of Fe2O3–Pt ellipsoids coated by double‐shelled La2O3 as a catalyst for the reduction of 4‐nitrophenol

A facile strategy is reported for the fabrication of Pt‐loaded core–shell nanocomposite ellipsoids (Fe₂O₃‐Pt@DSL) consisting of ellipsoidal Fe₂O₃ cores, double‐layered La₂O₃ shells and deposited Pt nanoparticles (NPs). The formation of the doubled‐shelled structure uses Fe₂O₃‐Pt@mSiO₂ as template sacrificial agent and it involves the re‐deposition of silica and self‐assembly of metal oxide units. The preparation methods of double‐shelled metal oxides avoid repeated coating and etching and could be utilized to fabricate other shaped double‐shelled composites. Characterization results indicated that the Fe₂O₃‐Pt@DSL nanocomposites possessed mesoporous structure and tunable shell thickness. Moreover, due to the formation of Fe₂O₃ and La₂O₃ composites, Pt NPs can also be stabilized via deposition on chemically active oxides with a synergistic effect. Therefore, as a catalyst for the reduction of 4‐nitrophenol, Fe₂O₃‐Pt@DSL showed superior catalytic activity and reusability due to structural superiority and enhanced composite synergy. Finally, well‐dispersed Pt NPs were encapsulated into the void between the shell layers to construct the Fe₂O₃‐Pt@DSL‐Pt catalyst.     

On‐surface Fenton and Fenton‐like reactions appraised by paper spray ionization mass spectrometry

On‐surface degradation of sildenafil (an adequate substrate as it contains assorted functional groups in its structure) promoted by the Fenton (Fe²⁺/H₂O₂) and Fenton‐like (Mⁿ⁺/H₂O₂; Mⁿ⁺ = Fe³⁺, Co²⁺, Cu²⁺, Mn²⁺) systems was investigated by using paper spray ionization mass spectrometry (PS‐MS). The performance of each system was compared by measuring the ratio between the relative intensities of the ions of m/z 475 (protonated sildenafil) and m/z 235 (protonated lidocaine, used as a convenient internal standard and added to the paper just before the PS‐MS analyzes). The results indicated the following order in the rates of such reactions: Fe²⁺/H₂O₂ ≫ H₂O₂ ≫ Cu²⁺/H₂O₂ > Mⁿ⁺/H₂O₂ (Mⁿ⁺ = Fe³⁺, Co²⁺, Mn²⁺) ~ Mⁿ⁺ (Mⁿ⁺ = Fe²⁺, Fe³⁺, Co²⁺, Cu²⁺, Mn²). The superior capability of Fe²⁺/H₂O₂ in causing the degradation of sildenafil indicates that Fe²⁺ efficiently decomposes H₂O₂ to yield hydroxyl radicals, quite reactive species that cause the substrate oxidation. The results also indicate that H₂O₂ can spontaneously decompose likely to yield hydroxyl radicals, although in a much smaller extension than the Fenton system. This effect, however, is strongly inhibited by the presence of the other cations, ie, Fe³⁺, Co²⁺, Cu²⁺, and Mn²⁺. A unique oxidation by‐product was detected in the reaction between Fe²⁺/H₂O₂ with sildenafil, and a possible structure for it was proposed based on the MS/MS data. The on‐surface reaction of other substrates (trimethoprim and tamoxifen) with the Fenton system was also investigated. In conclusion, PS‐MS shows to be a convenient platform to promptly monitor on‐surface oxidation reactions.     

CS@Cu2O and magnetic Fe3O4@SiO2-pAMBA-CS-Cu2O as heterogeneous catalysts for CuAAC click reaction

The recovery of agricultural and food wastes are one of the main areas of current research for optimal biowaste management to reduce greenhouse gas (GHG) emissions that are generated when it is not properly treated. Corn silk (CS) as biowaste from the agricultural sector is a rich source of natural compounds especially polysaccharides. We present here a chemical activation method to convert CS to values added heterogeneous catalyst for the synthesis of triazoles compounds via copper catalyzed azide–alkyne cycloaddition (CuAAC) reaction. For this purpose, cuprous oxide coated CS (CS@Cu₂O) and multifunctional Fe₃O₄@SiO₂–para-aminomethyl benzoic acid–CS–Cu₂O composite (denoted as Fe₃O₄@SiO₂‐pAMBA-CS‐Cu₂O) were fabricated. Different analytical techniques have been used to describe the size, crystal structure, elemental composition and other physical properties of the fabricated catalysts. These heterogeneous catalysts showed excellent catalytic activities for the synthesis of 1,4-disubstituted-1,2,3-triazoles via click reaction in H₂O at 70 °C under base and external-reductant-free conditions. The magnetic properties of the catalyst allowed easy separation after reaction by simply applying an external magnet. Other advantages of this work are the recyclability of the catalyst, the absence of reducing agent and base, besides utilisation of bio wastes for the production of heterogeneous catalyst.     

A two‐dimensional mixed‐valence CuII/CuI coordination polymer constructed from 2‐(pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylate

Coordination polymers are a thriving class of functional solid‐state materials and there have been noticeable efforts and progress toward designing periodic functional structures with desired geometrical attributes and chemical properties for targeted applications. Self‐assembly of metal ions and organic ligands is one of the most efficient and widely utilized methods for the construction of CPs under hydro(solvo)thermal conditions. 2‐(Pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylate (HPIDC²⁻) has been proven to be an excellent multidentate ligand due to its multiple deprotonation and coordination modes. Crystals of poly[aquabis[μ₃‐5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ⁵N¹,O⁵:N³,O⁴:N²]copper(II)dicopper(I)], [Cu^IICu^I₂(C₁₀H₅N₃O₄)₂(H₂O)]_n, (I), were obtained from 2‐(pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PIDC) and copper(II) chloride under hydrothermal conditions. The asymmetric unit consists of one independent Cu^II ion, two Cu^I ions, two HPIDC²⁻ ligands and one coordinated water molecule. The Cu^II centre displays a square‐pyramidal geometry (CuN₂O₃), with two N,O‐chelating HPIDC²⁻ ligands occupying the basal plane in a trans geometry and one O atom from a coordinated water molecule in the axial position. The Cu^I atoms adopt three‐coordinated Y‐shaped coordinations. In each [CuN₂O] unit, deprotonated HPIDC²⁻ acts as an N,O‐chelating ligand, and a symmetry‐equivalent HPIDC²⁻ ligand acts as an N‐atom donor via the pyridine group. The HPIDC²⁻ ligands in the polymer serve as T‐shaped 3‐connectors and adopt a μ₃‐κ²N,O:κ²N′,O′:κN′′‐coordination mode, linking one Cu^II and two Cu^I cations. The Cu cations are arranged in one‐dimensional –Cu1–Cu2–Cu3– chains along the [001] direction. Further crosslinking of these chains by HPIDC²⁻ ligands along the b axis in a –Cu2–HPIDC²⁻–Cu3–HPIDC²⁻–Cu1– sequence results in a two‐dimensional polymer in the (100) plane. The resulting (2,3)‐connected net has a (12³)₂(12)₃ topology. Powder X‐ray diffraction confirmed the phase purity for (I), and susceptibilty measurements indicated a very weak ferromagnetic behaviour. A thermogravimetric analysis shows the loss of the apical aqua ligand before decomposition of the title compound.     

XPS and ISS analysis of Fischer-Tropsch catalysts

Summary The surface compositions of K and Cu containing Fe/Mn oxide catalysts for Fischer-Tropsch synthesis were investigated by XPS and ISS. The surface species after calcination are identified as Fe₂O₃, Mn₂O₃, MnO₂, CuO and most likely KO₂, and after in situ reduction at 723 K Fe⁰, Cu⁰, Fe²⁺ and Fe³⁺ oxides, MnO and KOH. Mn and K are enriched on the surfaces after calcination and reduction; the Cu surface content is approximately equal to the bulk concentration. The K enrichment is especially strong and ISS indicates that potassium is mainly confined to the uppermost layers. The degree of reduction of Fe is strongly dependent on the amount of Cu or K. The change in surface composition during Fischer-Tropsch reaction in the XPS equipment can be correlated to the activity of the catalysts. The pure and Cu containing samples show a constant activity and only a small increase in carbon surface concentration. The K containing catalysts deactivate after a short time and are then totally covered by carbon. On all catalyst surfaces a small amount of carbonate is formed.

---

XPS- and ISS-Analyse von Fischer-Tropsch-Katalysatoren