Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe‐MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two‐electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs‐300 exhibits the highest activity for ORR with near‐zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high‐yield H₂O₂ production rate of 6.5 mol g_cat^?1 h^?1 has also been achieved by MOF NSs‐300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs‐300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.     

Photocatalytic Hydrogen Production Coupled with Selective Benzylamine Oxidation over MOF Composites

Photocatalytic water splitting requires separation of the mixed H₂ and O₂ products and is often hampered by the sluggish O₂‐producing half reaction. An approach is now reported to address these issues by coupling the H₂‐producing half reaction with value‐added benzylamine oxidation reaction using metal–organic framework (MOF) composites. Upon MOF photoexcitation, the electrons rapidly reduce the protons to generate H₂ and the holes promote considerable benzylamine oxidation to N‐benzylbenzaldimine with high selectivity. Further experimental characterizations and theoretical calculation reveal that the highly conjugated s‐triazine strut in the MOF structure is crucial to the efficient charge separation and excellent photocatalytic activity.     

A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

Integration of Plasmonic Effects and Schottky Junctions into Metal–Organic Framework Composites: Steering Charge Flow for Enhanced Visible‐Light Photocatalysis

A wide range of light absorption and rapid electron–hole separation are desired for efficient photocatalysis. Herein, on the basis of a semiconductor‐like metal–organic framework (MOF), a Pt@MOF/Au catalyst with two types of metal–MOF interfaces integrates the surface plasmon resonance excitation of Au nanorods with a Pt‐MOF Schottky junction, which not only extends the light absorption of the MOF from the UV to the visible region but also greatly accelerates charge transfer. The spatial separation of Pt and Au particles by the MOF further steers the formation of charge flow and expedites the charge migration. As a result, the Pt@MOF/Au presents an exceptionally high photocatalytic H₂ production rate by water splitting under visible light irradiation, far superior to Pt/MOF/Au, MOF/Au and other counterparts with similar Pt or Au contents, highlighting the important role of each component and the Pt location in the catalyst.     

Synthesis,structure and photocatalytic degradation of organic dyes of a copper(II) metal–organic framework (Cu–MOF) with a 4‐coordinated three‐dimensional CdSO4 topology

Metal–organic frameworks (MOFs) have attracted much interest in the fields of gas separation and storage, catalysis synthesis, nonlinear optics, sensors, luminescence, magnetism, photocatalysis gradation and crystal engineering because of their diverse properties and intriguing topologies. A Cu–MOF, namely poly[[(μ₂‐succinato‐κ²O:O′){μ₂‐tris[4‐(1,2,4‐triazol‐1‐yl)phenyl]amine‐κ²N:N′}copper(II)] dihydrate], {[Cu(C₄H₄O₄)(C₂₄H₁₈N₁₀)]·2H₂O}_n or {[Cu(suc)(ttpa)]·2H₂O}_n, (I), was synthesized by the hydrothermal method using tris[4‐(1,2,4‐triazol‐1‐yl)phenyl]amine (ttpa) and succinate (suc^2?), and characterized by IR, powder X‐ray diffraction (PXRD), luminescence, optical band gap and valence band X‐ray photoelectron spectroscopy (VB XPS). Cu–MOF (I) shows a twofold interpenetrating 4‐coordinated three‐dimensional CdSO₄ topology with point symbol {6⁵·8}. It presents good photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB) under visible‐light irradiation. A photocatalytic mechanism was proposed and confirmed.     

Boosting Photocatalytic Hydrogen Production of a Metal–Organic Framework Decorated with Platinum Nanoparticles: The Platinum Location Matters

Improving the efficiency of electron–hole separation and charge‐carrier utilization plays a central role in photocatalysis. Herein, Pt nanoparticles of ca. 3 nm are incorporated inside or supported on a representative metal–organic framework (MOF), UiO‐66‐NH₂, denoted as Pt@UiO‐66‐NH₂ and Pt/UiO‐66‐NH₂, respectively, for photocatalytic hydrogen production via water splitting. Compared with the pristine MOF, both Pt‐decorated MOF nanocomposites exhibit significantly improved yet distinctly different hydrogen‐production activities, highlighting that the photocatalytic efficiency strongly correlates with the Pt location relative to the MOF. The Pt@UiO‐66‐NH₂ greatly shortens the electron‐transport distance, which favors the electron–hole separation and thereby yields much higher efficiency than Pt/UiO‐66‐NH₂. The involved mechanism has been further unveiled by means of ultrafast transient absorption and photoluminescence spectroscopy.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Nanocomposites of Tantalum‐Based Pyrochlore and Indium Hydroxide Showing High and Stable Photocatalytic Activities for Overall Water Splitting and Carbon Dioxide Reduction

Nanocomposites of tantalum‐based pyrochlore nanoparticles and indium hydroxide were prepared by a hydrothermal process for UV‐driven photocatalytic reactions including overall water splitting, hydrogen production from photoreforming of methanol, and CO₂ reduction with water to produce CO. The best catalyst was more than 20 times more active than sodium tantalate in overall water splitting and 3 times more active than Degussa P25 TiO₂ in CO₂ reduction. Moreover, the catalyst was very stable while generating stoichiometric products of H₂ (or CO) and O₂ throughout long‐term photocatalytic reactions. After the removal of In(OH)₃, the pyrochlore nanoparticles remained highly active for H₂ production from pure water and aqueous methanol solution. Both experimental studies and density functional theory calculations suggest that the pyrochlore nanoparticles catalyzed the water reduction to produce H₂, whereas In(OH)₃ was the major active component for water oxidation to produce O₂.     

Synthesis and Modification of Zn‐doped TiO2 Nanoparticles for the Photocatalytic Degradation of Tetracycline

The synthesis of Zn‐doped TiO₂ nanoparticles by solgel method was investigated in this study, as well as its modification by H₂O₂. The catalyst was characterized by transmission electron microscopy, X‐ray diffraction, Brunauer–Emmett–Teller, UV–visible reflectance spectra and X‐ray photoelectron spectroscopy (XPS). The results indicated that doping Zn into TiO₂ nanoparticles could inhibit the transformation from anatase phase to rutile phase. Zn existed as the second valence oxidation state in the Zn‐doped TiO₂. Zn‐doped TiO₂ that was synthesized by 5% Zn doping at 450°C exhibited the best photocatalytic activity. Then, the H₂O₂ modification further enhanced the photocatalytic activity. Zn doping and H₂O₂ modifying narrowed the band gap and efficiently increased the optical absorption in visible region. The optimal degradation rate of tetracycline by Zn‐doped TiO₂ and H₂O₂ modified Zn‐doped TiO₂ was 85.27% and 88.14%. Peroxide groups were detected in XPS analysis of H₂O₂ modified Zn‐doped TiO₂, favoring the adsorption of visible light. Furthermore, Zn‐doped TiO₂ modified by H₂O₂ had relatively good reusability, exhibiting a potential practical application for tetracycline's photocatalytic degradation.     

Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe-MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two-electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs-300 exhibits the highest activity for ORR with near-zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high-yield H₂O₂ production rate of 6.5 mol g_cat⁻¹ h⁻¹ has also been achieved by MOF NSs-300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs-300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.     

Anthraquinone Redox Relay for Dye‐Sensitized Photo‐electrochemical H2O2 Production

Anthraquinone (AQ) redox mediators are introduced to metal‐free organic dye sensitized photo‐electrochemical cells (DSPECs) for the generation of H₂O₂. Instead of directly reducing O₂ to produce H₂O₂, visible‐light‐driven AQ reduction occurs in the DSPEC and the following autooxidation with O₂ allows H₂O₂ accumulation and AQ regeneration. In an aqueous electrolyte, under 1 sun conditions, a water‐soluble AQ salt is employed with the highest photocurrent of up to 0.4 mA cm^?2 and near‐quantitative faradaic efficiency for producing H₂O₂. In a non‐aqueous electrolyte, under 1 sun illumination, an organic‐soluble AQ is applied and the photocurrent reaches 1.8 mA cm^?2 with faradaic efficiency up to 95 % for H₂O₂ production. This AQ‐relay DSPEC exhibits the highest photocurrent so far in non‐aqueous electrolytes for H₂O₂ production and excellent acid stability in aqueous electrolytes, thus providing a practical and efficient strategy for visible‐light‐driven H₂O₂ production.     

Structural analysis of interpenetrated methyl‐modified MOF‐5 and its gas‐adsorption properties

The first example of an interpenetrated methyl‐modified MOF‐5 with the formula Zn₄O(DMBDC)₃(DMF)₂, where DMBDC^2? is 2,5‐dimethylbenzene‐1,4‐dicarboxylate and DMF is N,N‐dimethylformamide (henceforth denoted as Me₂MOF‐5‐int ), namely, poly[tris(μ₄‐2,5‐dimethylbenzene‐1,4‐dicarboxylato)bis(N,N‐dimethylformamide)‐μ₄‐oxido‐tetrazinc(II)], [Zn₄(C₁₀H₈O₄)₃O(C₃H₇NO)₂]_n, has been obtained from a solvothermal synthesis of 2,5‐dimethylbenzene‐1,4‐dicarboxylic acid and Zn(NO₃)₂·6H₂O in DMF. A systematic study revealed that the choice of solvent is of critical importance for the synthesis of phase‐pure Me₂MOF‐5‐int , which was thoroughly characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as by gas‐adsorption analyses. The Brunauer–Emmett–Teller surface area of Me₂MOF‐5‐int (660 m² g^?1), determined by N₂ adsorption, is much lower than that of nonpenetrated Me₂MOF‐5 (2420 m² g^?1). However, Me₂MOF‐5‐int displays an H₂ uptake capacity of 1.26 wt% at 77 K and 1.0 bar, which is comparable to that of non‐interpenetrated Me₂MOF‐5 (1.51 wt%).     

Enhanced Photocatalytic Activity of MIL‐125 by Post‐Synthetic Modification with CrIII and Ag Nanoparticles

NH₂‐MIL‐125, [Ti₈O₈(OH)₄(bdc‐NH₂)₆] (bdc^2?=1,4‐benzene dicarboxylate) is a highly porous metal–organic framework (MOF) that has a band gap lying within the ultraviolet region at about 2.6 eV. The band gap may be reduced by a suitable post‐synthetic modification of the nanochannels using conventional organic chemistry methods. Here, it is shown that the photocatalytic activity of NH₂‐MIL‐125 in the degradation of methylene blue under visible light is remarkably augmented by post‐synthetic modification with acetylacetone followed by Cr^III complexation. The latter metal ion extends the absorption from the ultraviolet to the visible light region (band gap 2.21 eV). The photogenerated holes migrate from the MOF’s valence band to the Cr^III valence band, promoting the separation of holes and electrons and increasing the recombination time. Moreover, it is shown that the MOF’s photocatalytic activity is also much improved by doping with Ag nanoparticles, formed in situ by the reduction of Ag⁺ with the acetylacetonate pendant groups (the resulting MOF band gap is 2.09 eV). Presumably, the Ag nanoparticles are able to accept the MOF’s photogenerated electrons, thus avoiding electron–hole recombination. Both, the Cr‐ and Ag‐bearing materials are stable under photocatalytic conditions. These findings open new avenues for improving the photocatalytic activity of MOFs.     

Template‐free Fabrication of ZnS/TiO2 Photocatalyst with Macrochannels

Constructing a porous structure in photocatalysts is an effective strategy for improving the photocatalytic activity because of its enhanced molecule transfer capability and light capturing efficiency. In this work, a hierarchical macro‐/mesoporous ZnS/TiO₂ composite with macrochannels was successfully synthesized without using templates by the simple dropwise addition of an ethanol solution of tetrabutyl titanate and zinc acetate into a sodium sulfide aqueous solution, which was then calcined at 450°C. Compared with pure TiO₂, the ordered porous ZnS/TiO₂ composite exhibited an enhanced photocatalytic activity on methylene blue removal under UV‐light irradiation. The results indicate that the macro‐/mesoporous structure, the large specific surface area, and the heterostructure combination between ZnS and TiO₂ play a synergistic effect on the enhanced photocatalytic activity via improving the light absorption and the diffusion of organic molecules, providing more reactive sites for the photocatalytic reaction and improving the separation of photogenerated electron–hole pairs, respectively. Radical trapping experiments demonstrated that holes (h⁺) and superoxide anion radicals (O₂⁻) play an important role in the photocatalytic oxidation process.     

Degradation of hazardous organic dyes with solar‐driven advanced oxidation process catalyzed by the mixed metal–organic frameworks

phosphonate‐based bimetallic metal‐ organic frameworks, namely STA‐12(M₁, M₂) (M₁, M₂ = Mn, Fe, Co), show photocatalytic activity for the degradation of Rhodamine B (RhB) and Methylene blue (MB) from aqueous solution under natural sunlight irradiation. The degradation of the dyes, appears to be faster with STA‐12(Fe, Mn) than other synthesized MOFs. Thus, photo‐Fenton oxidative discoloration of dyes has been studied by H₂O₂ catalyzed with the STA‐12(Fe, Mn). The process is first order with respect to dyes and the synergistic index in the STA‐12(Fe, Mn)/sunlight/H₂O₂system reached as high as 472%. Mineralization of dyes was discussed by spectroscopic and TOC measurement. Besides, the efficiency of STA‐12(Fe, Mn) used in photocatalytic process was attentively investigated through the characterization of reactive radicals, the stability and reusability of the photocatalyst, also the effect of operational parameters such as H₂O₂ dosage, solution pH and initial dye concentration. This work demonstrates the first example of facilitating photo‐Fenton‐like excitation of H₂O₂ via phosphonate based mixed metal organic frameworks as photocatalysts and explained a new opportunity for solar‐induced AOP environmental remediation and protection.     

Incorporating Transition-Metal Phosphides Into Metal-Organic Frameworks for Enhanced Photocatalysis

Metal-organic frameworks (MOFs) have been shown to be an excellent platform in photocatalysis. However, to suppress electron–hole recombination, a Pt cocatalyst is usually inevitable, especially in photocatalytic H₂ production, which greatly limits practical application. Herein, for the first time, monodisperse, small-size, and noble-metal-free transitional-metal phosphides (TMPs; for example, Ni₂P, Ni₁₂P₅), are incorporated into a representative MOF, UiO-66-NH₂, for photocatalytic H₂ production. Compared with the parent MOF and their physical mixture, both TMPs@MOF composites display significantly improved H₂ production rates. Thermodynamic and kinetic studies reveal that TMPs, behaving similar ability to Pt, greatly accelerate the linker-to-cluster charge transfer, promote charge separation, and reduce the activation energy of H₂ production. Significantly, the results indicate that Pt is thermodynamically favorable, yet Ni₂P is kinetically preferred for H₂ production, accounting for the higher activity of Ni₂P@UiO-66-NH₂ than Pt@UiO-66-NH₂.     

Visible‐Light Photocatalytic Hydrogen Production Activity of ZnIn2S4 Microspheres Using Carbon Quantum Dots and Platinum as Dual Co‐catalysts

ZnIn₂S₄ microspheres (ZIS MSs) were for the first time decorated with carbon quantum dots (CQDs) and platinum nanoparticles (NPs) as dual co‐catalysts of for photocatalytic H₂ production. The ZIS MSs co‐loaded with CQDs and Pt exhibited a high photocatalytic H₂ production rate of 1032.2 μmol h^?1 g^?1 with an apparent quantum efficiency of 2.2 % (420 nm) in triethanolamine aqueous solution under visible‐light irradiation, which was much higher than the respective photocatalytic rates of pure ZIS, Pt loaded ZIS, and CQDs‐decorated ZIS. Such a great enhancement was attributed to the integrative effect of good crystallization, enhanced light absorption, high electrical conductivity of CQDs, and the vectorial electron transfer from ZIS to CQDs and Pt NPs (ZIS→CQDs→Pt).     

Two‐Dimensional Perovskite Oxynitride K2LaTa2O6N with an H+/K+ Exchangeability in Aqueous Solution Forming a Stable Photocatalyst for Visible‐Light H2 Evolution

Undoped layered oxynitrides have not been considered as promising H₂‐evolution photocatalysts because of the low chemical stability of oxynitrides in aqueous solution. Here, we demonstrate the synthesis of a new layered perovskite oxynitride, K₂LaTa₂O₆N, as an exceptional example of a water‐tolerant photocatalyst for H₂ evolution under visible light. The material underwent in‐situ H⁺/K⁺ exchange in aqueous solution while keeping its visible‐light‐absorption capability. Protonated K₂LaTa₂O₆N, modified with an Ir cocatalyst, exhibited excellent catalytic activity toward H₂ evolution in the presence of I^? as an electron donor and under visible light; the activity was six times higher than Pt/ZrO₂/TaON, one of the best‐performing oxynitride photocatalysts for H₂ evolution. Overall water splitting was also achieved using the Ir‐loaded, protonated K₂LaTa₂O₆N in combination with Cs‐modified Pt/WO₃ as an O₂ evolution photocatalyst in the presence of an I₃^?/I^? shuttle redox couple.     

Functionalized Cu‐MOF@CNT Hybrid: Synthesis,Crystal Structure and Applicability in Supercapacitors

The synthesis of a metal–organic framework (MOF) named IITI‐1 is reported by employing an H₂L linker with Cu(NO₃)₂?3 H₂O in a mixed solvent system of N,N‐dimethyl formamide (DMF) and H₂O. Further, in order to explore the energy storage application of IITI‐1 , a IITI‐1/CNT hybrid was prepared by a simple ultrasonication technique. Incorporation of a carbon nanotube (CNT) in the layered IITI‐1 MOF gave rise to enhanced electrolyte accessibility along with improved electrochemical storage capacity. The electrochemical investigations reveal a high specific capacitance (380 F g^?1 at 1.6 A g^?1) with a good rate performance for IITI‐1/CNT . The IITI‐1 MOF and the IITI‐1/CNT composite were characterized by PXRD, BET, SEM, and TEM techniques. Moreover, IITI‐1 MOF was also confirmed by single‐crystal XRD analysis.     

Construction of visible-light-responsive metal–organic framework with pillared structure for dye degradation and Cr(VI) reduction

A water-stable mixed-linker metal–organic framework (MOF) was rationally synthesized using a controllable pillared-layer method. The prepared Co(II)–MOF shows wide-range absorption in the visible light region due to the incorporation of highly conjugated anthracene-based bipyridine ligand. Experiments suggest that the MOF is highly efficient for the photoreduction of toxic Cr(VI) ions in water under visible light. Important issues affecting photocatalytic performance, such as the influence of pH and the control of electron–hole separation by scavenger, were carefully examined. Beyond Cr(VI) ions, we also explored the photocatalytic degradation performance of the MOF using a persistent azo dye as a model substrate, where H₂O₂-involved advanced oxidation process was applied. Control experiments suggest that the introduction of environmentally benign H₂O₂ significantly enhances the degradation performance due to the generation of reactive hydroxyl radicals. The study not only demonstrates the great feasibility of the preparation of a new MOF photocatalyst through a controllable pillared-layer method, but also reveals that rational functionalization of ligand in the MOF is convenient for achieving desirable applications.