首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 359 毫秒
1.
In this paper, a novel catalyst is introduced based on the immobilization of palladium on modified magnetic graphene oxide nanoparticles. The catalyst is characterized by several methods, including transmission electron microscopy, scanning electron microscopy, X‐ray fluorescence, vibrating‐sample magnetometer, Fourier transform‐infrared and dynamic light scattering (DLS) analysis. The activity of the catalyst was investigated in the synthesis of 4(3H)‐quinazolinones via Pd‐catalyzed carbonylation‐cyclization of N‐(2‐bromoaryl) benzimidamides by Mo (CO)6. The Mo (CO)6 is used as a carbon monoxide source for performing the reaction under mild conditions. The catalyst showed good reusability, and no change in activity was observed after 10 cycles of recovery.  相似文献   

2.
New graphene oxide (GO)‐based hydrogels that contain vitamin B2/B12 and vitamin C (ascorbic acid) have been synthesized in water (at neutral pH value). These gel‐based soft materials have been used to synthesize various metal nanoparticles, including Au, Ag, and Pd nanoparticles, as well as nanoparticle‐containing reduced graphene oxide (RGO)‐based nanohybrid systems. This result indicates that GO‐based gels can be used as versatile reactors for the synthesis of different nanomaterials and hybrid systems on the nanoscale. Moreover, the RGO‐based nanohybrid hydrogel with Pd nanoparticles was used as an efficient catalyst for C? C bond‐formation reactions with good yields and showed high recyclability in Suzuki–Miyaura coupling reactions.  相似文献   

3.
A green palladium‐based catalyst supported on Artemisia abrotanum extract‐modified graphene oxide (Pd NPs/RGO‐A. abrotanum) hybrid material has been used as a recoverable and heterogeneous nanocatalyst for the catalytic reduction of various dyes, including methylene blue, methyl orange and rhodamine B, in the presence of NaBH4 as reducing agent in aqueous medium at room temperature. With the help of UV–visible spectroscopy, the catalytic reactions were investigated. According to the results, these reactions followed the pseudo‐first‐order rate equation.  相似文献   

4.
Low cost, high activity and selectivity, convenient separation, and increased reusability are the main requirements for noble‐metal‐nanocatalyst‐catalyzed reactions. Despite tremendous efforts, developing noble‐metal nanocatalysts to meet the above requirements remains a significant challenge. Here we present a general strategy for the preparation of strongly coupled Fe3O4 and palladium nanoparticles (PdNPs) to graphene sheets by employing polyethyleneimine as the coupling linker. Transmission electron microscopic images show that Pd and Fe3O4 nanoparticles are highly dispersed on the graphene surface, and the mean particle size of Pd is around 3 nm. This nanocatalyst exhibits synergistic catalysis by Pd nanoparticles supported on reduced graphene oxide (rGO) and a tertiary amine of polyethyleneimine (Pd/Fe3O4/PEI/rGO) for the Tsuji–Trost reaction in water and air. For example, the reaction of ethyl acetoacetate with allyl ethyl carbonate afforded the allylated product in more than 99 % isolated yield, and the turnover frequency reached 2200 h?1. The yield of allylated products was 66 % for Pd/rGO without polyethyleneimine. The catalyst could be readily recycled by a magnet and reused more than 30 times without appreciable loss of activity. In addition, only about 7.5 % of Pd species leached off after 20 cycles, thus rendering this catalyst safer for the environment.  相似文献   

5.
Designed nitrogen and sulfur co‐doped graphene wrapped magnetic core‐shell supported Pd nanoparticles were synthesized through the following steps. Firstly, Fe3O4 was prepared, coated with silica and then functionalized with amine groups to create a positive charge on the structure for enhancing the interaction of the Fe3O4@SiO2 with graphene oxide. Secondary, the pre‐catalyst wrapped with graphene to enhance adsorption of aromatic substrates through π–π stacking. Thirdly, graphene was doped with nitrogen and sulfur to increase the grafting of Pd in hybrid. Finally, Pd NPs were attached on the surface of pre‐engineered structure to produce Fe3O4@SiO2@N,S‐wG@Pd which exhibited high performance in Suzuki reactions. This superior activity can be indexed to the incorporation of N and S atoms into graphene led to high anchoring and well‐dispersion of Pd NPs on the nanocomposite surface offering large amounts of active centers, that strongly increased the interaction between Pd and substrates to decreases Pd leaching.  相似文献   

6.
The growing concern about the potentially adverse effects of the production of chemical compounds on the sustainable development of the environment has led to a great deal of efforts to search for low‐cost and environmentally friendly catalytic systems. A pyrene‐tagged N‐heterocyclic carbene palladacycle complex ([Pd{(C,N)C6H4CH2NH(Et)}(Imd‐P)Br]) was prepared by reacting imidazolium salt with dimer ([Pd2{(C,N)C6H4CH2NH(Et)}2(μ‐OAc)2]). Then, it was immobilized onto the surface of reduced graphene oxide (rGO) via π–π stacking forces. The hybrid compound ((NHC)Pd‐rGO) was made in a one‐step process. Various techniques were employed to characterize the compound. In addition, computational studies were used to verify the interaction between the Pd complex and rGO. The catalytic activity of the molecular complex and hybrid material was evaluated in both Suzuki–Miyaura cross‐coupling reactions and reduction of p‐nitrophenol to p‐aminophenol. The catalytic activity of the hybrid material was enhanced in comparison with the corresponding homogeneous analogue. Thus, rGO seems to play a significant role in catalytic activity. Hot filtration experiments show the heterogeneous nature of the catalyst resulting from the strong interaction between pyrene and graphene. The hybrid (NHC)Pd‐rGO material could be recycled up to six times with no decrease in catalytic activity.  相似文献   

7.
Well distributed Pd‐Cu bimetallic alloy nanoparticles supported on amine‐terminated ionic liquid functional three‐dimensional graphene (3D IL‐rGO/Pd‐Cu) as an efficient catalyst for Suzuki cross‐coupling reaction has been prepared via a facile synthetic method. The introduction of IL‐NH2 cations on the surface of graphene sheets can effectively avoid the re‐deposition of graphene sheets, allowing the catalyst to be reused up to 10 cycles. The addition of Cu not only saves cost but also ensures high catalytic efficiency. It is worthy to note that the catalyst 3D IL‐rGO/Pd2.5Cu2.5 can efficiently catalyze the Suzuki cross‐coupling reaction with the yield up to 100% in 0.25 h, almost one‐fold higher than that by the pristine IL‐rGO/Pd2.5 catalyst (52%). The Powder X‐Ray Diffraction (XRD), combining energy dispersive X‐ray spectroscopy (EDS) mapping results confirm the existence and distribution of Pd and Cu in the bimetallic nanoparticles. The transmission electron microscopy (TEM) reveals the nanoparticle size with an average diameter of 3.0 ± 0.5 nm. X‐ray photoelectron spectroscopy (XPS) analysis proved the presence of electron transfer from Cu to Pd upon alloying. Such alloying‐induced electronic modification of Pd‐Cu alloy and 3D ionic liquid functional graphene with large specific surface area both accounted for the catalytic enhancement.  相似文献   

8.
A three‐dimensional (3D) nitrogen‐doped reduced graphene oxide (rGO)–carbon nanotubes (CNTs) architecture supporting ultrafine Pd nanoparticles is prepared and used as a highly efficient electrocatalyst. Graphene oxide (GO) is first used as a surfactant to disperse pristine CNTs for electrochemical preparation of 3D rGO@CNTs, and subsequently one‐step electrodeposition of the stable colloidal GO–CNTs solution containing Na2PdCl4 affords rGO@CNTs‐supported Pd nanoparticles. Further thermal treatment of the Pd/rGO@CNTs hybrid with ammonia achieves not only in situ nitrogen‐doping of the rGO@CNTs support but also extraordinary size decrease of the Pd nanoparticles to below 2.0 nm. The resulting catalyst is characterized by scanning and transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, and X‐ray photoelectron spectroscopy. Catalyst performance for the methanol oxidation reaction is tested through cyclic voltammetry and chronoamperometry techniques, which shows exceedingly high mass activity and superior durability.  相似文献   

9.
A novel nonenzymatic H2O2 sensor based on a palladium nanoparticles/graphene (Pd‐NPs/GN) hybrid nanostructures composite film modified glassy carbon electrode (GCE) was reported. The composites of graphene (GN) decorated with Pd nanoparticles have been prepared by simultaneously reducing graphite oxide (GO) and K2PdCl4 in one pot. The Pd‐NPs were intended to enlarge the interplanar spacing of graphene nanosheets and were well dispersed on the surface or completely embedded into few‐layer GN, which maintain their high surface area and prevent GN from aggregating. XPS analysis indicated that the surface Pd atoms are negatively charged, favoring the reduction process of H2O2. Moreover, the Pd‐NPs/GN/GCE could remarkably decrease the overpotential and enhance the electron‐transfer rate due to the good contact between Pd‐NPs and GN sheets, and Pd‐NPs have high catalytical effect for H2O2 reduction. Amperometric measurements allow observation of the electrochemical reduction of H2O2 at 0.5 V (vs. Ag/AgCl). The H2O2 reduction current is linear to its concentration in the range from 1×10?9 to 2×10?3 M, and the detection limit was found to be 2×10?10 M (S/N=3). The as‐prepared nonenzymatic H2O2 sensor exhibits excellent repeatability, selectivity and long‐term stability.  相似文献   

10.
Transition metal salen complex MoO2–salen was successfully tethered onto amino‐functionalized graphene oxide (designated as MoO2–salen–GO), which was tested in the epoxidation of various alkenes using tert‐butylhydroperoxide or H2O2 as oxidant. Characterization results showed that dioxomolybdenum(VI) complex was successfully grafted onto the amino‐functionalized graphene oxide and the structure of the graphene oxide was well preserved after several stepwise synthesis procedures. Catalytic tests showed that heterogeneous catalyst MoO2–salen–GO was more active than its homogeneous analogue MoO2–salen in the epoxidation of cyclooctene due to site isolation. In addition, the MoO2–salen–GO catalyst could be reused three times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

11.
An alternative approach to develop a Pd catalyst based on dendrimer‐functionalized graphene oxide for C‐C cross‐coupling reactions is reported. Pd@MGO‐D‐NH2 has been synthesized by incipient wet impregnation method. The structure of the catalyst was thoroughly characterized by a set of analytical techniques such as TEM, BET, SEM/EDS, FTIR, and elemental mapping analysis. Then, the catalytic activity of the catalyst was scrutinized for promoting sonogashira C‐C coupling reaction. The results manifested that Pd@MGO‐D‐NH2 was able to catalyze the coupling reaction to obtain high coupling yields in short reaction time. The results of present work are hoped to aid the development of new class of heterogeneous catalysts as the high performance candidate for industrial applications.  相似文献   

12.
A magnetically separable NiFe2O4@GO–Pd composite (GO = graphene oxide) was successfully prepared by a facile one‐pot hydrothermal strategy. This new kind of hybrid material was fully characterized using powder X‐ray diffraction, Raman spectroscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy and vibrating sample magnetometry. Structural characterizations confirmed the formation of NiFe2O4 and Pd nanocrystals, and the close anchoring between nanoparticles and GO sheets. Additionally, the as‐prepared NiFe2O4@GO–Pd nanocomposite was effectively employed in the palladium‐catalyzed Heck reaction in an ethanol–water system as a green solvent. The catalyst was completely recoverable with the simple application of an external magnetic field and with no obvious loss of catalytic activity even after six repeated cycles. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

13.
In this study, a 3Au? 1Pd alloy nanoparticles/graphene composite (3Au? 1Pd alloy NPs/GN) with carboxyl groups and hydroxyl groups was prepared facilely by co‐reduction of graphene oxide (GO), HAuCl4, K2PdCl4, with an Au? Pd alloy molar ratio of 3 : 1. The composite modified glass carbon electrode (GCE) showed a good performance for detecting bisphenol A (BPA) due to the enhanced electron transfer kinetics and large active surface area. The effective enrichment of BPA is attributed to the carboxyl groups and hydroxyl groups on the composite. According to the results of differential pulse voltammetry (DPV), the BPA oxidation current is linear to its concentration in the range of 10 nM–5.0 µM (R=0.998), and the detection limit is found to be 4.0 nM (S/N=3).  相似文献   

14.
As alternatives to the common tertiary phosphine/Pd systems, well‐defined N‐heterocyclic carbene–Pd complexes have been proven to be highly efficient precatalysts for intermolecular direct annalution of o‐haloanilines and ketones at lower catalyst loadings. A highly efficient and practical protocol for synthesis of functionalized indoles was developed using (IPr)Pd(acac)Cl as catalyst. Both o‐bromoanilines and o‐chloroanilines gave rise to efficient coupling under the reaction conditions. Related to acyclic ones, cyclic ketones coupled more effectively with o‐haloanilines. With [Pd(IPr)2] as catalyst, the base‐sensitive groups including OH and CO2H groups could be tolerated. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

15.
An efficient strategy (enhanced metal oxide interaction and core–shell confinement to inhibit the sintering of noble metal) is presented confined ultrathin Pd‐CeOx nanowire (2.4 nm) catalysts for methane combustion, which enable CH4 total oxidation at a low temperature of 350 °C, much lower than that of a commercial Pd/Al2O3 catalyst (425 °C). Importantly, unexpected stability was observed even under harsh conditions (800 °C, water vapor, and SO2), owing to the confinement and shielding effect of the porous silica shell together with the promotion of CeO2. Pd‐CeOx solid solution nanowires (Pd‐Ce NW) as cores and porous silica as shells (Pd‐CeNW@SiO2) were rationally prepared by a facile and direct self‐assembly strategy for the first time. This strategy is expected to inspire more active and stable catalysts for use under severe conditions (vehicle emissions control, reforming, and water–gas shift reaction).  相似文献   

16.
A new heterogeneous catalyst for the epoxidation of olefins was prepared by immobilization of peroxophosphotungstate anions on the surface of clicked magnetite‐graphene oxide as magnetically recoverable support. To prepare the heterogeneous catalyst, the clicked magnetite‐graphene oxide support was prepared by thiolene click reaction of thiol functionalized graphene oxide with vinyl modified magnetite nanoparticles. The tailored support was then modified with aminopropyl groups followed by electrostatic interaction with peroxophosphotungstate anions to achieve the desired heterogeneous catalyst. Characterization of the catalyst was performed by various physicochemical methods which confirmed the successful immobilization of peroxopolyoxotungstate species on the surface of clicked magnetite‐graphene oxide. Catalytic activity of the catalyst revealed its high catalytic activity and selectivity in the epoxidation of various olefins in the presence of H2O2 as green oxidant. This heterogeneous catalyst can be magnetically reused several times without significant loss of activity and selectivity.  相似文献   

17.
A novel light‐active magnetic Pd complex as a photocatalyst was prepared through bonding organometallics to mesoporous silica channels formed on the surface of silica‐coated iron oxide nanoparticles. The nanocomposite (denoted as Fe3O4@SiO2@m‐SiO2@PDA‐Pd(0); PDA = 1,10‐phenanthroline‐2,9‐dicarbaldehyde) is more efficient and has higher photocatalytic capability in the degradation of 2,4‐dichlorophenol under visible light irradiation compared with virgin Pd complex (PDA‐Pd). This noteworthy photodegradation activity can be due to the high dispersion of Pd nanoparticles. High yield, low reaction time and non‐toxicity of the catalyst are the main merits of this protocol. Also magnetic separation is an environmentally friendly alternative method for the separation and recovery of the catalyst, since it minimizes the use of solvents and auxiliary materials, reduces operation time and minimizes catalyst loss by preventing mass loss and oxidation. The produced Pd catalyst was characterised using various techniques. Furthermore, transmission electron microscopy characterization was used for determining the structural properties of the Pd nanocatalyst.  相似文献   

18.
Metallic palladium (Pd) electrocatalysts for oxygen reduction and hydrogen peroxide (H2O2) oxidation/reduction are prepared via electroplating on a gold metal substrate from dilute (5 to 50 mM) aqueous K2PdCl4 solution. The best Pd catalyst layer possessing dendritic nanostructures is formed on the Au substrate surface from 50 mM Pd precursor solution (denoted as Pd‐50) without any additional salt, acid or Pd templating chemical species. The Pd‐50 consisted of nanostructured dendrites of polycrystalline Pd metal and micropores within the dendrites which provide high catalyst surface area and further facilitate reactant mass transport to the catalyst surface. The electrocatalytic activity of Pd‐50 proved to be better than that of a commercial Pt (Pt/C) in terms of lower overpotential for the onset and half‐wave potentials and a greater number of electrons (n) transferred. Furthermore, amperometric it curves of Pd‐50 for H2O2 electrochemical reaction show high sensitivities (822.2 and ?851.9 µA mM?1 cm?2) and low detection limits (1.1 and 7.91 µM) based on H2O2 oxidation H2O2 reduction, respectively, along with a fast response (<1 s).  相似文献   

19.
Zinc oxide‐decorated superparamagnetic silica attached to graphene oxide (Fe3O4/SiO2/PTS‐GO‐ZnO), as a novel nanocomposite, was designed, and its core‐shell structure was appropriately characterized by different spectroscopy or microscopy methods and thermal techniques as well as measuring of its porosity and magnetic properties. The catalytic activity of Fe3O4/SiO2/PTS‐GO‐ZnO, as a reusable heterogeneous catalyst, was investigated for efficient one‐pot multi‐component synthesis of medicinally important functionalized 2‐amino‐6‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐arylnicotinonitrile derivatives. The significant features of the present procedure are mild reaction conditions, low loading of the catalyst, high to quantitative yields of the desired products, avoiding the use of toxic heavy metals or solvents, simple isolation and purification of the products, and stability as well as reusability of the catalyst after at least six consecutive runs.  相似文献   

20.
An SO3H‐functionalized nano‐MGO‐D‐NH2 catalyst has been prepared by multi‐functionalization of a magnetic graphene oxide (GO) nanohybrid and evaluated in the synthesis of tetrahydrobenzo[b]pyran and pyrano[2,3‐d]pyrimidinone derivatives. The GO/Fe3O4 (MGO) hybrid was prepared via an improved Hummers method followed by the covalent attachment of 1,4‐butanesultone with the amino group of the as‐prepared polyamidoamine‐functionalized MGO (MGO‐D‐NH2) to give double‐functionalized magnetic nanoparticles as the catalyst. The prepared nanoparticles were characterized to confirm their synthesis and to precisely determine their physicochemical properties. In summary, the prepared catalyst showed marked recyclability and catalytic performance in terms of reaction time and yield of products. The results of this study are hoped to aid the development of a new class of heterogeneous catalysts to show high performance and as excellent candidates for industrial applications.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号