MoS2 Nanoflowers with Expanded Interlayers as High‐Performance Anodes for Sodium‐Ion Batteries

MoS₂ nanoflowers with expanded interlayer spacing of the (002) plane were synthesized and used as high‐performance anode in Na‐ion batteries. By controlling the cut‐off voltage to the range of 0.4–3 V, an intercalation mechanism rather than a conversion reaction is taking place. The MoS₂ nanoflower electrode shows high discharge capacities of 350 mAh g^?1 at 0.05 A g^?1, 300 mAh g^?1 at 1 A g^?1, and 195 mAh g^?1 at 10 A g^?1. An initial capacity increase with cycling is caused by peeling off MoS₂ layers, which produces more active sites for Na⁺ storage. The stripping of MoS₂ layers occurring in charge/discharge cycling contributes to the enhanced kinetics and low energy barrier for the intercalation of Na⁺ ions. The electrochemical reaction is mainly controlled by the capacitive process, which facilitates the high‐rate capability. Therefore, MoS₂ nanoflowers with expanded interlayers hold promise for rechargeable Na‐ion batteries.     

Three‐Dimensional MoS2 Hierarchical Nanoarchitectures Anchored into a Carbon Layer as Graphene Analogues with Improved Lithium Ion Storage Performance

Much attention has recently been focused on the synthesis and application of graphene analogues of layered nanomaterials owing to their better electrochemical performance than the bulk counterparts. We synthesized graphene analogue of 3D MoS₂ hierarchical nanoarchitectures through a facile hydrothermal route. The graphene‐like MoS₂ nanosheets are uniformly dispersed in an amorphous carbon matrix produced in situ by hydrothermal carbonization. The interlaminar distance between the MoS₂ nanosheets is about 1.38 nm, which is far larger than that of bulk MoS₂ (0.62 nm). Such a layered architecture is especially beneficial for the intercalation and deintercalation of Li⁺. When tested as a lithium‐storage anode material, the graphene‐like MoS₂ hierarchical nanoarchitectures exhibit high specific capacity, superior rate capability, and enhanced cycling performance. This material shows a high reversible capacity of 813.5 mAh g^?1 at a current density of 1000 mA g^?1 after 100 cycles and a specific capacity as high as 600 mAh g^?1 could be retained even at a current density of 4000 mA g^?1. The results further demonstrate that constructing 3D graphene‐like hierarchical nanoarchitectures can effectively improve the electrochemical performance of electrode materials.     

Fluoroethylene Carbonate Enabling a Robust LiF‐rich Solid Electrolyte Interphase to Enhance the Stability of the MoS2 Anode for Lithium‐Ion Storage

As a high‐capacity anode for lithium‐ion batteries (LIBs), MoS₂ suffers from short lifespan that is due in part to its unstable solid electrolyte interphase (SEI). The cycle life of MoS₂ can be greatly extended by manipulating the SEI with a fluoroethylene carbonate (FEC) additive. The capacity of MoS₂ in the electrolyte with 10 wt % FEC stabilizes at about 770 mAh g^?1 for 200 cycles at 1 A g^?1, which far surpasses the FEC‐free counterpart (ca. 40 mAh g^?1 after 150 cycles). The presence of FEC enables a robust LiF‐rich SEI that can effectively inhibit the continual electrolyte decomposition. A full cell with a LiNi_0.5Co_0.3Mn_0.2O₂ cathode also gains improved performance in the FEC‐containing electrolyte. These findings reveal the importance of controlling SEI formation on MoS₂ toward promoted lithium storage, opening a new avenue for developing metal sulfides as high‐capacity electrodes for LIBs.     

Micro‐MoS2 with Excellent Reversible Sodium‐Ion Storage

Low storage capacity and poor cycling stability are the main drawbacks of the electrode materials for sodium‐ion (Na‐ion) batteries, due to the large radius of the Na ion. Here we show that micro‐structured molybdenum disulfide (MoS₂) can exhibit high storage capacity and excellent cycling and rate performances as an anode material for Na‐ion batteries by controlling its intercalation depth and optimizing the binder. The former method is to preserve the layered structure of MoS₂, whereas the latter maintains the integrity of the electrode during cycling. A reversible capacity of 90 mAh g^?1 is obtained on a potential plateau feature when less than 0.5 Na per formula unit is intercalated into micro‐MoS₂. The fully discharged electrode with sodium alginate (NaAlg) binder delivers a high reversible capacity of 420 mAh g^?1. Both cells show excellent cycling performance. These findings indicate that metal chalcogenides, for example, MoS₂, can be promising Na‐storage materials if their operation potential range and the binder can be appropriately optimized.     

Synthesis of Highly Uniform Molybdenum–Glycerate Spheres and Their Conversion into Hierarchical MoS2 Hollow Nanospheres for Lithium‐Ion Batteries

Highly uniform Mo–glycerate solid spheres are synthesized for the first time through a solvothermal process. The size of these Mo–glycerate spheres can be easily controlled in the range of 400–1000 nm by varying the water content in the mixed solvent. As a precursor, these Mo–glycerate solid spheres can be converted into hierarchical MoS₂ hollow nanospheres through a subsequent sulfidation reaction. Owing to the unique ultrathin subunits and hollow interior, the as‐prepared MoS₂ hollow nanospheres exhibit appealing performance as the anode material for lithium‐ion batteries. Impressively, these hierarchical structures deliver a high capacity of about 1100 mAh g^?1 at 0.5 A g^?1 with good rate retention and long cycle life.     

Hierarchical Nanotubes Constructed by Co9S8/MoS2 Ultrathin Nanosheets Wrapped with Reduced Graphene Oxide for Advanced Lithium Storage

Nanostructured hybrid metal sulfides have attracted intensive attention due to their fascinating properties that are unattainable by the single‐phased counterpart. Herein, we report an efficient approach to construct cobalt sulfide/molybdenum disulfide (Co₉S₈/MoS₂) wrapped with reduced graphene oxide (rGO). The unique structures constructed by ultrathin nanosheets and synergetic effects benefitting from bimetallic sulfides provide improved lithium ions reaction kinetics, and they retain good structural integrity. Interestingly, the conductive rGO can facilitate electron transfer, increase the electronic conductivity and accommodate the strain during cycling. When evaluated as anode materials for lithium‐ion batteries (LIBs), the resultant reduced graphene oxide‐coated cobalt sulfide/molybdenum disulfide (Co₉S₈/MoS₂@rGO) nanotubes deliver high specific capacities of 1140, 948, 897, 852, 820, 798 and 784 mAh g^?1 at the various discharging current densities of 0.2, 0.5, 1, 2, 3, 4 and 5 A g^?1, respectively. In addition, they can maintain an excellent cycle stability with a discharge capacity of 807 mAh g^?1 at 0.2 A g^?1 after 70 cycles, 787 mAh g^?1 at 1 A g^?1 after 180 cycles and 541 mAh g^?1 at 2 A g^?1 after 200 cycles. The proposed method may offer fundamental understanding for the rational design of other hybrid functional composites with high Li‐storage properties.     

High‐Performance Sodium‐Ion Batteries and Sodium‐Ion Pseudocapacitors Based on MoS2/Graphene Composites

Sodium‐ion energy storage, including sodium‐ion batteries (NIBs) and electrochemical capacitive storage (NICs), is considered as a promising alternative to lithium‐ion energy storage. It is an intriguing prospect, especially for large‐scale applications, owing to its low cost and abundance. MoS₂ sodiation/desodiation with Na ions is based on the conversion reaction, which is not only able to deliver higher capacity than the intercalation reaction, but can also be applied in capacitive storage owing to its typically sloping charge/discharge curves. Here, NIBs and NICs based on a graphene composite (MoS₂/G) were constructed. The enlarged d‐spacing, a contribution of the graphene matrix, and the unique properties of the MoS₂/G substantially optimize Na storage behavior, by accommodating large volume changes and facilitating fast ion diffusion. MoS₂/G exhibits a stable capacity of approximately 350 mAh g^?1 over 200 cycles at 0.25 C in half cells, and delivers a capacitance of 50 F g^?1 over 2000 cycles at 1.5 C in pseudocapacitors with a wide voltage window of 0.1–2.5 V.     

Topochemical Path in High Lithiation of MoS2

Lithiation of MoS₂/RGO (reduced graphite oxide) electrodes repeatedly reached experimental capacities larger than 1000 mA · g^–1, corresponding to at least 6 lithium equivalents per gram of MoS₂. At our best knowledge, a convincing explanation is still missing in literature. In most cases, phase separation into Li₂S and elemental Mo was assumed to occur. However, this can only explain capacities up to 669 mA · g^–1, corresponding to an exchange of four Li. Formation of LiMo alloys could resolve the problem but the Li/Mo system does not contain any binary phases. If signs for Li₂S formation were found, indeed experimental capacities were below 700 mAh · g^–1. Here we present a topochemical mechanism, which sustains multiple charge/discharge cycles at 1000 mAh · g^–1, corresponding to an exchange of at least 6 Li per formula unit MoS₂. This topochemical reaction route prevents decomposition into binary phases and thus avoids segregation of the components of MoS₂. Throughout the whole lithiation/delithiation process, distinct layers of Mo are preserved but extended or shrunk by slight movements and reshuffling of sulfur and lithium atoms. On addition of 6 Li per formula unit to MoS₂, all central sulfur atoms are hosted in mutual Mo–S layers such that formal S^2– and Mo^2– anions appear coordinated by lithium cations. Indeed, similar structures are known in the field of Zintl phases. Our first‐principles crystal structure prediction study describes this topological path through conversion reactions during the lithiation/delithiation processes. All optimized phases along the topological path exhibit a distinct Mo layering giving rise to a series of dominant scattering into pseudo 001 reflections perpendicular to these Mo planes. The mechanism we present here explains why such high capacities can be reached reversibly for MoS₂/RGO nano composites     

Interlayer-expanded MoS<Subscript>2</Subscript>/graphene composites as anode materials for high-performance lithium-ion batteries

A facile strategy was developed to prepare interlayer-expanded MoS₂/graphene composites through a one-step hydrothermal reaction method. MoS₂ nanosheets with several-layer thickness were observed to uniformly grow on the surface of graphene sheets. And the interlayer spacing of MoS₂ in the composites was determined to expand to 0.95 nm by ammonium ions intercalation. The MoS₂/graphene composites show excellent lithium storage performance as anode materials for Li-ion batteries. Through gathering advantages including expanded interlayers, several-layer thickness, and composited graphene, the composites exhibit reversible capacity of 1030.6 mAh g^?1 at the current density of 100 mA g^?1 and still retain a high specific capacity of 725.7 mAh g^?1 at a higher current density of 1000 mA g^?1 after 50 cycles.     

Hierarchical MoS2@Carbon Microspheres as Advanced Anodes for Li‐Ion Batteries

Hierarchical hybridized nanocomposites with rationally constructed compositions and structures have been considered key for achieving superior Li‐ion battery performance owing to their enhanced properties, such as fast lithium ion diffusion, good collection and transport of electrons, and a buffer zone for relieving the large volume variations during cycling processes. Hierarchical MoS₂@carbon microspheres (HMCM) have been synthesized in a facile hydrothermal treatment. The structure analyses reveal that ultrathin MoS₂ nanoflakes (ca. 2–5 nm) are vertically supported on the surface of carbon nanospheres. The reversible capacity of the HMCM nanocomposite is maintained at 650 mA h g^?1 after 300 cycles at 1 A g^?1. Furthermore, the capacity can reach 477 mA h g^?1 even at a high current density of 4 A g^?1. The outstanding electrochemical performance of HMCM is attributed to the synergetic effect between the carbon spheres and the ultrathin MoS₂ nanoflakes. Additionally, the carbon matrix can supply conductive networks and prevent the aggregation of layered MoS₂ during the charge/discharge process; and ultrathin MoS₂ nanoflakes with enlarged surface areas, which can guarantee the flow of the electrolyte, provide more active sites and reduce the diffusion energy barrier of Li⁺ ions.     

Low‐Temperature Synthesis of Honeycomb CuP2@C in Molten ZnCl2 Salt for High‐Performance Lithium Ion Batteries

Phosphorus‐rich metal phosphides have very high lithium storage capacities, but they are difficult to prepare. A low‐temperature phosphorization method based on Mg reducing PCl₃ in ZnCl₂ molten salt at 300 °C is developed to synthesize phosphorus‐rich CuP₂@C from a Cu‐MOF derived Cu@C composite. Abnormal oxidation of Cu by Zn²⁺ in the molten salt is observed, which leads to the porous honeycomb nanostructure and homogeneously distributed ultrafine CuP₂ nanocrystals. The honeycomb CuP₂@C exhibits excellent lithium storage performance with high reversible capacity (1146 mAh g^?1 at 0.2 A g^?1) and superior cycling stability (720 mAh g^?1 after 600 cycles at 1.0 A g^?1), showing the promising application of P‐rich metal phosphides in lithium ion batteries.     

A Self‐Standing and Flexible Electrode of Yolk–Shell CoS2 Spheres Encapsulated with Nitrogen‐Doped Graphene for High‐Performance Lithium‐Ion Batteries

Flexible lithium‐ion batteries (LIBs) have recently attracted increasing attention with the fast development of bendable electronic systems. Herein, a facile and template‐free solvothermal method is presented for the fabrication of hybrid yolk–shell CoS₂ and nitrogen‐doped graphene (NG) sheets. The yolk–shell architecture of CoS₂ encapsulated with NG coating is designed for the dual protection of CoS₂ to address the structural and interfacial stability concerns facing the CoS₂ anode. The as‐prepared composite can be assembled into a film, which can be used as a binder‐free and flexible electrode for LIBs that does not require any carbon black conducting additives or current collectors. When evaluating lithium‐storage properties, such a flexible electrode exhibits a high specific capacity of 992 mAh g^?1 in the first reversible discharge capacity at a current rate of 100 mA g^?1 and high reversible capacity of 882 mAh g^?1 after 150 cycles with excellent capacity retention of 89.91 %. Furthermore, a reversible capacity as high as 655 mAh g^?1 is still achieved after 50 cycles even at a high rate of 5 C due to the yolk–shell structure and NG coating, which not only provide short Li‐ion and electron pathways, but also accommodate large volume variation.     

Three‐Dimensional Hierarchical Constructs of MOF‐on‐Reduced Graphene Oxide for Lithium–Sulfur Batteries

A three‐dimensional (3D) hierarchical MOF‐on‐reduced graphene oxide (MOF‐on‐rGO) compartment was successfully synthesized through an in situ reduced and combined process. The unique properties of the MOF‐on‐rGO compartment combining the polarity and porous features of MOFs with the high conductivity of rGO make it an ideal candidate as a sulfur host in lithium–sulfur (Li‐S) batteries. A high initial discharge capacity of 1250 mAh g^?1 at a current density of 0.1 C (1.0 C=1675 mAh g^?1) was reached using the MOF‐on‐rGO based electrode. At the rate of 1.0 C, a high specific capacity of 601 mAh g^?1 was still maintained after 400 discharge–charge cycles, which could be ascribed to the synergistic effect between MOFs and rGO. Both the hierarchical structures of rGO and the polar pore environment of MOF retard the diffusion and migration of soluble polysulfide, contributing to a stable cycling performance. Moreover, the spongy‐layered rGO can buffer the volume expansion and contraction changes, thus supplying stable structures for Li‐S batteries.     

Organotrisulfide: A High Capacity Cathode Material for Rechargeable Lithium Batteries

An organotrisulfide (RSSSR, R is an organic group) has three sulfur atoms which could be involved in multi‐electron reduction reactions; therefore it is a promising electrode material for batteries. Herein, we use dimethyl trisulfide (DMTS) as a model compound to study its redox reactions in rechargeable lithium batteries. With the aid of XRD, XPS, and GC‐MS analysis, we confirm DMTS could undergo almost a 4 e^? reduction process in a complete discharge to 1.0 V. The discharge products are primarily LiSCH₃ and Li₂S. The lithium cell with DMTS catholyte delivers an initial specific capacity of 720 mAh g^?1_DMTS and retains 82 % of the capacity over 50 cycles at C/10 rate. When the electrolyte/DMTS ratio is 3:1 mL g^?1, the reversible specific energy for the cell including electrolyte can be 229 Wh kg^?1. This study shows organotrisulfide is a promising high‐capacity cathode material for high‐energy rechargeable lithium batteries.     

Synthesis and Electronic/ionic Transport Properties of MoO2/rGO Anode for Lithium Ion Batteries

MoO₂/rGO (reduced graphite oxide) composites have been synthesized by hydrothermal method followed by anneal and characterized by X‐ray diffraction (XRD) and scanning electron microscope (SEM). Galvanostatic charge/discharge testing and electrochemical impedance spectroscopy (EIS) techniques are employed to evaluate the kinetic behaviors of the MoO₂/rGO during lithiation/delithiation. The obtained MoO₂‐based materials have monoclinic crystal structure, and worm like shape with average dimensions of 100‐200 nm width and 500 nm‐1 μm length. There are two steps of lithium ion intercalation/de‐intercalation for the MoO₂/rGO anode at the potential ranging from 1.0 to 3.5 V, locating at E_Li/Li⁺ = 1.60/1.75 V, 1.25/1.40 V, and the first discharge and charge capacities are, respectively, 221.0 and 185.4 mAh g^?1. The resistances of R_SEI and R_CT for the MoO₂/rGO anode are 2‐4 Ω and below 5 Ω. Moreover, the lithium diffusion coefficient calculated from the EIS measurement is about 3.6×10^?9 cm² s^?1.     

Facile simultaneous polymerization enabled in-situ confinement of size-tailored GeO2 nanocrystals in continuous S-Doped carbons for lithium storage

GeO₂ is a promising anode material for lithium ion batteries due to its high theoretical capacity (1126 mAh g^?1 for reversibly storing 4.4 Li⁺), and moderately low operating voltage (<1.5 V). Nevertheless, the fabrication of truly durable GeO₂ anode with satisfactory rate capability and cycling stability remains a big challenge because of its inherent low conductivity, and the large volume expansion upon charge-discharge that causes severe capacity fading. In this study, an innovative nanostructure with size-adjustable GeO₂ nanoparticles (16–26 nm) embedded in continuous S-doped carbon (GeO₂/S-doped carbon, GSC) has been successfully fabricated via a facile in-situ simultaneous polymerization method followed by heat treatment. The electrochemical results indicate that the as-prepared GSC composites show high reversible capacity (672.9 mAh g^?1 at 50 mA g^?1), superior rate capability (332.9 mAh g^?1 at 1000 mA g^?1), and long-term cycle life (179 mAh g^?1 after 500 cycles at 1000 mA g^?1) as anode materials for lithium ion batteries. The excellent electrochemical performance of GSC nanocomposites could be ascribed to the homogeneous and continuous S-doped carbon matrix, which provides shortened ion diffusion pathway, increased electrical conductivity, enhanced structural stability, and introduced surface/interface property.     

Rechargeable Room‐Temperature Na–CO2 Batteries

Developing rechargeable Na–CO₂ batteries is significant for energy conversion and utilization of CO₂. However, the reported batteries in pure CO₂ atmosphere are non‐rechargeable with limited discharge capacity of 200 mAh g^?1. Herein, we realized the rechargeability of a Na–CO₂ battery, with the proposed and demonstrated reversible reaction of 3 CO₂+4 Na?2 Na₂CO₃+C. The battery consists of a Na anode, an ether‐based electrolyte, and a designed cathode with electrolyte‐treated multi‐wall carbon nanotubes, and shows reversible capacity of 60000 mAh g^?1 at 1 A g^?1 (≈1000 Wh kg^?1) and runs for 200 cycles with controlled capacity of 2000 mAh g^?1 at charge voltage <3.7 V. The porous structure, high electro‐conductivity, and good wettability of electrolyte to cathode lead to reduced electrochemical polarization of the battery and further result in high performance. Our work provides an alternative approach towards clean recycling and utilization of CO₂.     

High‐Loading Nano‐SnO2 Encapsulated in situ in Three‐Dimensional Rigid Porous Carbon for Superior Lithium‐Ion Batteries

Tin oxide nanoparticles (SnO₂ NPs) have been encapsulated in situ in a three‐dimensional ordered space structure. Within this composite, ordered mesoporous carbon (OMC) acts as a carbon framework showing a desirable ordered mesoporous structure with an average pore size (≈6 nm) and a high surface area (470.3 m² g^?1), and the SnO₂ NPs (≈10 nm) are highly loaded (up to 80 wt %) and homogeneously distributed within the OMC matrix. As an anode material for lithium‐ion batteries, a SnO₂@OMC composite material can deliver an initial charge capacity of 943 mAh g^?1 and retain 68.9 % of the initial capacity after 50 cycles at a current density of 50 mA g^?1, even exhibit a capacity of 503 mA h g^?1 after 100 cycles at 160 mA g^?1. In situ encapsulation of the SnO₂ NPs within an OMC framework contributes to a higher capacity and a better cycling stability and rate capability in comparison with bare OMC and OMC ex situ loaded with SnO₂ particles (SnO₂/OMC). The significantly improved electrochemical performance of the SnO₂@OMC composite can be attributed to the multifunctional OMC matrix, which can facilitate electrolyte infiltration, accelerate charge transfer, and lithium‐ion diffusion, and act as a favorable buffer to release reaction strains for lithiation/delithiation of the SnO₂ NPs.     

Three‐Dimensional Fe2N@C Microspheres Grown on Reduced Graphite Oxide for Lithium‐Ion Batteries and the Li Storage Mechanism

Nanostructured iron compounds as lithium‐ion‐battery anode material have attracted considerable attention with respect to improved electrochemical energy storage and excellent specific capacity, so lots of iron‐based composites have been developed. Herein, a novel composite composed of three‐dimensional Fe₂N@C microspheres grown on reduced graphite oxide (denoted as Fe₂N@C‐RGO) has been synthesized through a simple and effective technique assisted by a hydrothermal and subsequent heating treatment process. As the anode material for lithium‐ion batteries, the synthetic Fe₂N@C‐RGO displayed excellent Li⁺‐ion storage performance with a considerable initial capacity of 847 mAh g^?1, a superior cycle stability (a specific discharge capacity of 760 mAh g^?1 remained after the 100th cycle), and an improved rate‐capability performance compared with those of the pure Fe₂N and Fe₂N‐RGO nanostructures. The good performance should be attributed to the existence of RGO layers that can facilitate to enhance the conductivity and shorten the lithium‐ion diffusion path; in addition, the carbon layer on the surface of Fe₂N can avert the structure decay caused by the volume change during the lithiation/delithiation process. Moreover, in situ X‐ray absorption fine‐structure analysis demonstrated that the excellent performance can be attributed to the lack of any obvious change in the coordination geometry of Fe₂N@C‐RGO during the charge/discharge processes.     

Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.