Generation of Optical and Mechanical Squeezing in the Linear‐and‐Quadratic Optomechanics

Generation of strong stationary optical and mechanical squeezing is proposed for the linear‐and‐quadratic optomechanical system, where two cavity modes induce linear and quadratic optomechanical couplings, respectively. Through the linearization treatment, linearized coupling between cavity mode and mechanical mode and the mechanical parametric amplification process are achievable and controllable by independent driving lasers. Optical and mechanical squeezing are generated following different mechanisms. Optical squeezing works in the strong coupling regime, and mechanical amplification would push the system close to instability threshold, which could deeply improve ponderomotive squeezing even significantly beyond the 3 dB squeezing limit. Mechanical squeezing is generated based on the reservoir engineering method, where parametric amplification induces the squeezing transformation of mechanical mode; and linearized coupling, which operates in the red‐sideband and weak coupling limits, induces the ground‐state cooling of transformed mechanical mode. Finally, the original mechanical mode would be squeezed, which could also exceed 3 dB limit.     

Qubit-assisted squeezing of mirror motion in a dissipative cavity optomechanical system

In this study, we investigate a hybrid system consisting of an atomic ensemble trapped inside a dissipative optomechanical cavity assisted with perturbative oscillator-qubit coupling. Such a system is generally very suitable for generating stationary squeezing of the mirror motion in the long-time limit under the unresolved sideband regime. Based on the master equation and covariance matrix approaches, we discuss in detail the respective squeezing effects. We also determine that in both approaches, simplifying the system dynamics with adiabatic elimination of the highly dissipative cavity mode is very effective. In the master equation approach, we find that the squeezing is a resulting effect of the cooling process and is robust against thermal fluctuations of the mechanical mode. In the covariance matrix approach, we can approximately obtain the analytical result of the steady-state mechanical position variance from the reduced dynamical equation. Finally, we compare the two approaches and observe that they are completely equivalent for the stationary dynamics. Moreover, the scheme may be useful for possible ultraprecise quantum measurement that involves mechanical squeezing.     

Strong Squeezing of Duffing Oscillator in a Highly Dissipative Optomechanical Cavity System

In the conventional scheme of generating strong mechanical squeezing by the joint effect between mechanical parametric amplification and sideband cooling, the resolved sideband condition is required so as to overcome the quantum backaction heating. In the unresolved sideband regime, to suppress the quantum backaction, a χ⁽²⁾ nonlinear medium is introduced to the cavity. The result shows that the quantum backaction heating effect caused by unwanted counter-rotating term can be completely removed. Hence, the strong mechanical squeezing can be obtained even for the system far from the resolved-sideband regime.     

Ground-state cooling based on a three-cavity optomechanical system in the unresolved-sideband regime

In the unresolved sideband regime,we propose a scheme for cooling mechanical resonator close to its ground state in a three-cavity optomechanical system,where the auxiliary cavities are indirectly connected with the mechanical resonator through standard optomechanical subsystem.The standard optomechanical subsystem is driven by a strong pump laser field.With the help of the auxiliary cavities,the heating process is suppressed and the cooling process of the mechanical resonator is enhanced.More importantly,the average phonon number is much less than 1 in a larger range.This means that the mechanical resonator can be cooled down to its ground state.All these interesting features will significantly promote the physical realization of quantum effects in multi-cavity optomechanical systems.     

非绝热消除条件下输出边频量子关联

考虑了双模腔内含有N个三能级V型原子的系综与两个量子化场之间的相互作用。在非绝热消除原子变量的条件下,分析了两个初始为相干态的输入场从腔内输出后的量子关联性质。结果表明在恰当的条件下,在中心频率处可以获得量子纠缠,但随合作参数的增加,中心频率处的纠缠变小甚至消失。与此同时,在高频区间则产生了一对边频量子纠缠。这是由于合作参数增加引起的真空拉比分裂导致了高频处获得量子关联。此外,通过调节量子化场的强度以及原子和场的反对称失谐,还可获得两对边频量子纠缠。这对边频量子关联的研究具有十分重要的价值。     

Controllable Photon Transport in a Three-Mode Optomechanical System with the Non-Rotating Wave Approximation Effect

We propose a scheme for realizing controllable photon transport in a three-mode optomechanical system comprising one cavity and two mechanical modes. We found that the non-rotating wave approximation effect can cause the ideal optomechanically induced transparency of the output field. The effects of the cavity mode decay rate on the width of the optomechanically induced transparency window, the dispersion curve slope are discussed in the resolved sideband regime and the unresolved sideband regime.

     

Frequency‐Modulation‐Enhanced Ground‐State Cooling of Coupled Mechanical Resonators

The coupled mechanical resonators (MRs) are the prominent candidate for studying macroscopic quantum coherence. The prerequisite for observing macroscopic mechanical coherence is cooling the MRs to their ground state. Here, a theoretical scheme is proposed for improving the cooling of two coupled MRs by imposing frequency modulation (FM) upon the system to suppress the Stokes heating processes. By the methods of covariance analysis and numerical simulations, it is demonstrated that the cooling of double MRs can be realized in both stable and unstable regions with high efficiency compared to the cooling without FM, even if in unresolved sideband (USB) regime. By modulating the parameters appropriately, the cooling efficiencies of two MRs can be flexibly adjusted.     

Bistability and Entanglement of a Two-Mode Cavity Optomechanical System

We investigate the bistable properties and the entanglement in a two-mode cavity optomechanical system. Our results show that the bistable regime in terms of pumping amplitude can be adjusted by tuning the detunning. Although the two modes of the cavity interact with the same mechanical mode, there is no entanglement between them, while the two modes entangle with the mechanical mode seperately.     

双光腔耦合下机械振子的基态冷却

机械振子的基态冷却是腔量子光力学中的基本问题之一.所谓的基态冷却就是让机械振子的稳态声子数小于1.本文通过光压涨落谱和稳态声子数研究双光腔光力系统(标准单光腔光力系统中引入第二个光腔,并与第一个光腔直接耦合)的基态冷却.首先得到系统的有效哈密顿量,然后给出朗之万方程和速率方程,最后分别给出空腔和原子腔的光压涨落谱、冷却率和稳态声子数.通过光压涨落谱、冷却率和稳态声子数表达式,重点讨论空腔时机械振子的基态冷却,发现当满足最佳参数条件(机械振子的冷却跃迁速率对应光压涨落谱的最大值,而加热跃迁速率对应光压涨落谱的最小值)时,机械振子可以被冷却到稳态声子数足够少.此外分析:当辅助腔内注入原子系综时,若参数选择恰当可能更利于基态冷却.     

Effect of defects on the electronic structure of a PbI2/MoS2 van der Waals heterostructure: A first-principles study

PbI2/MoS2,as a typical van der Waals(vdW)heterostructure,has attracted intensive attention owing to its remarkable electronic and optoelectronic properties.In this work,the effect of defects on the electronic structures of a PbI2/MoS2 heterointerface has been systematically investigated.The manner in which the defects modulate the band structure of PbI2/MoS2,including the band gap,band edge,band alignment,and defect energy-level density within the band gap is discussed herein.It is shown that sulfur defects tune the band gaps,iodine defects shift the positions of the band edge and Fermi level,and lead defects realize the conversions between the straddling-gap band alignment and valence-band-aligned gap,thus enhancing the light-absorption ability of the material.     

Electro-optomechanical cooperative cooling of nanomechanical oscillator beyond resolved sideband regime

We propose a ground-state cooling scheme for a nanomechanical oscillator(NMO)that interacts with an optical cavity via radiation pressure at one side and with a superconducting microwave cavity via a capacitor at the other side.By driving these two cavities on their respective red sidebands with extra laser and microwave fields,the NMO’s dual cooling channel is created through electro-optomechanical cooperation.Differing from the conventional optomechanical system with a single optical cavity wherein ground-state cooling is limited in the resolved sideband,the proposed scheme allows the optical cavity to function in an unresolved sideband regime under the cooperation of a microwave cavity with a high quality factor,or vice versa.In a weak coupling regime we demonstrate that the NMO can be cooled to near its ground-state from a finite temperature with a cooling rate that is significantly faster than that of the single-cavity optomechanical system.The heating process can be completely suppressed by the cooperation of the dual cooling channel by appropriately selecting the system’s parameters.With a decreasing thermal phonon number,the numerical results of final mechanical occupancy gradually approach the analytical cooling limit.     

A short walk through quantum optomechanics

This paper gives a brief review of the basic physics of quantum optomechanics and provides an overview of some of its recent developments and current areas of focus. It first outlines the basic theory of cavity optomechanical cooling and gives a brief status report of the experimental state‐of‐the‐art. It then turns to the deep quantum regime of operation of optomechanical oscillators and covers selected aspects of quantum state preparation, control and characterization, including mechanical squeezing and pulsed optomechanics. This is followed by a discussion of the “bottom‐up” approach that exploits ultracold atomic samples instead of nanoscale systems. It concludes with an outlook that concentrates largely on the functionalization of quantum optomechanical systems and their promise in metrology applications.     

Entangling Cavity Modes in a Double-Cavity Optomechanical System

We study entanglement of the cavity modes in a double-cavity optomechanical system in strong-coupling regime. The system is consist of two optomechanical systems coupled by a single photon hopping between them. With the radiation pressure of the photon, entanglement of the cavity modes can be generated. The average concurrence of the cavity modes is at least twice larger than that of the mechanical modes. Moreover, when we change the ratio between coupling strength and resonant frequency of mechanical modes, the entanglement in cavity and mechanical modes are influenced differently.     

Proposal for entangling remote micromechanical oscillators via optical measurements

We propose an experiment to create and verify entanglement between remote mechanical objects by use of an optomechanical interferometer. Two optical cavities, each coupled to a separate mechanical oscillator, are coherently driven such that the oscillators are laser cooled to the quantum regime. The entanglement is induced by optical measurement and comes about by combining the output from the two cavities to erase which-path information. It can be verified through measurements of degrees of second-order coherence of the optical output field. The experiment is feasible in the regime of weak optomechanical coupling. Realistic parameters for the membrane-in-the-middle geometry suggest entangled state lifetimes on the order of milliseconds.     

Generating a Squeezed‐Coherent‐Cat State in a Double‐Cavity Optomechanical System

A squeezed‐coherent‐cat state (SCCS) in a mechanical system not only plays an important role for macroscopic quantum coherence, but also can be a carrier for quantum information. A scheme to generate a SCCS in a two‐mode optomechanical system is proposed, in which the modulated hopping interaction of two cavities is introduced. The two cavity modes couple with the same mechanical mode with linear and quadratic interaction, respectively. The SCCS is analytically deduced under an appropriate initial state, and the average phonon number and the parameter of squeeze are numerically calculated. Wigner function shown the properties of superposition and squeezing is plotted. Including the dissipation of the environment, the results show that a high quality mechanical resonator and a low noise environment are required to obtain high fidelity.     

Generating EPR-entangled mechanical state via feeding finite-bandwidth squeezed light

Einstein–Podolski–Rosen(EPR) entanglement state is achievable by combining two single-mode position and momentum squeezed states at a 50:50 beam-splitter(BS). We investigate the generation of the EPR entangled state of two vibrating membranes in a ring resonator, where clockwise(CW) and counter-clockwise(CCW) travelling-wave modes are driven by lasers and finite-bandwidth squeezed lights. Since the optomechanical coupling depends on the location of the membranes, CW and CCW can couple to the symmetric and antisymmetric combination of mechanical modes for a suitable arrangement, which corresponds to a 50:50 BS mixing. Moreover, by employing the red-detuned driving laser and tuning the central frequency of squeezing field blue detuned from the driving laser with a mechanical frequency, the squeezing property of squeezed light can be perfectly transferred to the mechanical motion in the weak coupling regime. Thus, the BS mixing modes can be position and momentum squeezed by feeding the appropriate squeezed lights respectively, and the EPR entangled mechanical state is obtained. Moreover, cavity-induced mechanical cooling can further suppress the influence of thermal noise on the entangled state.     

Enhancing stationary optomechanical entanglement with the Kerr medium

We theoretically investigate the stationary entanglement of a optomechanical system with an additional Kerr medium in the cavity. There are two kinds of interactions in the system, photon-mirror interaction and photon-photon interaction. The optomechanical entanglement created by the former interaction can be effectively controlled by the latter one. We find that the optomechanical entanglement is suppressed by Kerr interaction due to photon blockage. We also find that the Kerr interaction can create the stationary entanglement and induce the resonance of entanglement in the small detuning regime. These results show that the Kerr interaction is an effective control for the optomechanical system.     

Using coherent feedback loop for high quantum state transfer in optomechanics

We investigate the coherent feedback loop scheme to improve the quantum correlations transfer from optical to mechanical degrees of freedom in a double cavity optomechanical system. We use the Duan criterion to determine the separability of the two-mode mechanical states. The logarithmic negativity is employed to quantify the amount of the entanglement between mechanical modes in steady and dynamical regimes. We show that the entanglement can be significantly enhanced by a coherent feedback using a suitable tuning of the reflectivity parameter of the beam splitter located in each cavity. We also show that this enhancement is influenced by the temperature, the light squeezing parameter and the gain of the parameter amplifier. The entanglement dynamics in presence of the coherent feedback loop is also analyzed.     

非线性光学腔中的相位调制光机械动力学

研究了Fabry-Perot光学腔中包含一个光学参量放大器来增强腔场与机械振子之间的耦合的光机械动力学行为.在解析边带机制下用量子郎之万方程具体研究了振子的涨落光谱、光学多稳态行为、机械阻尼与修正共振频移和基态冷却,通过数值解讨论了辐射压力诱导机械振子和腔场的稳态振幅所展现的光学多稳态行为,同时也分析了辐射压力引起的修...