Electrochemical Reduction of 4,4′‐(2,2,2‐Trichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDT) and 4,4′‐(2,2‐Dichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDD) at Carbon Cathodes in Dimethylformamide

In dimethylformamide containing tetramethylammonium tetrafluoroborate, cyclic voltammograms for reduction of 4,4′‐(2,2,2‐trichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDT) at a glassy carbon cathode exhibit five waves, whereas three waves are observed for the reduction of 4,4′‐(2,2‐dichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDD). Bulk electrolyses of DDT and DDD afford 4,4′‐(ethene‐1,1‐diyl)bis(chlorobenzene) (DDNU) as principal product (67–94%), together with 4,4′‐(2‐chloroethene‐1,1‐diyl)bis(chlorobenzene) (DDMU), 1‐chloro‐4‐styrylbenzene, and traces of both 1,1‐diphenylethane and 4,4′‐(ethane‐1,1‐diyl)bis(chlorobenzene) (DDO). For electrolyses of DDT and DDD, the coulometric n values are essentially 4 and 2, respectively. When DDT is reduced in the presence of a large excess of D₂O, the resulting DDNU and DDMU are almost fully deuterated, indicating that reductive cleavage of the carbon–chlorine bonds of DDT is a two‐electron process that involves carbanion intermediates. A mechanistic scheme is proposed to account for the formation of the various products.     

Chemical and Structural Stability of Zirconium‐based Metal–Organic Frameworks with Large Three‐Dimensional Pores by Linker Engineering

The synthesis of metal–organic frameworks with large three‐dimensional channels that are permanently porous and chemically stable offers new opportunities in areas such as catalysis and separation. Two linkers (L1=4,4′,4′′,4′′′‐([1,1′‐biphenyl]‐3,3′,5,5′‐tetrayltetrakis(ethyne‐2,1‐diyl)) tetrabenzoic acid, L2=4,4′,4′′,4′′′‐(pyrene‐1,3,6,8‐tetrayltetrakis(ethyne‐2,1‐diyl))tetrabenzoic acid) were used that have equivalent connectivity and dimensions but quite distinct torsional flexibility. With these, a solid solution material, [Zr₆O₄(OH)₄(L1)_2.6(L2)_0.4]?(solvent)_x, was formed that has three‐dimensional crystalline permanent porosity with a surface area of over 4000 m² g^?1 that persists after immersion in water. These properties are not accessible for the isostructural phases made from the separate single linkers.     

Synthesis and Photovoltaic Properties of Cyclopentadithiophene‐Based Low‐Bandgap Copolymers That Contain Electron‐Withdrawing Thiazole Derivatives

We have synthesized four types of cyclopentadithiophene (CDT)‐based low‐bandgap copolymers, poly[{4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl}‐alt‐(2,2′‐bithiazole‐5,5′‐diyl)] ( PehCDT‐BT ), poly[(4,4‐dioctyl‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl)‐alt‐(2,2′‐bithiazole‐5,5′‐diyl)] ( PocCDT‐BT ), poly[{4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl}‐alt‐{2,5‐di(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole‐5,5′‐diyl}] ( PehCDT‐TZ ), and poly[(4,4‐dioctyl‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl)‐alt‐{2,5‐di(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole‐5,5′‐diyl}] ( PocCDT‐TZ ), for use in photovoltaic applications. The intramolecular charge‐transfer interaction between the electron‐sufficient CDT unit and electron‐deficient bithiazole (BT) or thiazolothiazole (TZ) units in the polymeric backbone induced a low bandgap and broad absorption that covered 300 nm to 700–800 nm. The optical bandgap was measured to be around 1.9 eV for PehCDT‐BT and PocCDT‐BT , and around 1.8 eV for PehCDT‐TZ and PocCDT‐TZ . Gel permeation chromatography showed that number‐average molecular weights ranged from 8000 to 14 000 g mol^?1. Field‐effect mobility measurements showed hole mobility of 10^?6–10^?4 cm² V^?1 s^?1 for the copolymers. The film morphology of the bulk heterojunction mixtures with [6,6]phenyl‐C₆₁‐butyric acid methyl ester (PCBM) was also examined by atomic force microscopy before and after heat treatment. When the polymers were blended with PCBM, PehCDT‐TZ exhibited the best performance with an open circuit voltage of 0.69 V, short‐circuit current of 7.14 mA cm^?2, and power conversion efficiency of 2.23 % under air mass (AM) 1.5 global (1.5 G) illumination conditions (100 mW cm^?2).     

Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

In‐ and Out‐of‐Cavity Interactions by Modulating the Size of Ruthenium Metallarectangles

Cationic (arene)ruthenium‐based tetranuclear complexes of the general formula [Ru₄(η⁶‐p‐cymene)₄(μ‐N∩N)₂(μ‐OO∩OO)₂]⁴⁺ were obtained from the dinuclear (arene)ruthenium complexes [Ru₂(η⁶‐p‐cymene)₂(μ‐OO∩OO)₂Cl₂] (p‐cymene=1‐methyl‐4‐(1‐methylethyl)benzene, OO∩OO=5,8‐dihydroxy‐1,4‐naphthoquinonato(2?), 9,10‐dihydroxy‐1,4‐anthraquinonato(2?), or 6,11‐dihydroxynaphthacene‐5,12‐dionato(2?)) by reaction with pyrazine or bipyridine linkers (N∩N=pyrazine, 4,4′‐bipyridine, 4,4′‐[(1E)‐ethene‐1,2‐diyl]bis[pyridine]) in the presence of silver trifluoromethanesulfonate (CF₃SO₃Ag) (Scheme). All complexes 4 – 12 were isolated in good yield as CF₃SO salts, and characterized by NMR and IR spectroscopy. The host–guest properties of the metallarectangles incorporating 4,4′‐bipyridine and (4,4′‐[(1E)‐ethene‐1,2‐diyl]bis[pyridine] linkers were studied in solution by means of multiple NMR experiments (1D, ROESY, and DOSY). The largest metallarectangles 10 – 12 incorporating (4,4′‐[(1E)‐ethene‐1,2‐diyl]bis[pyridine] linkers are able to host an anthracene, pyrene, perylene, or coronene molecule in their cavity, while the medium‐size metallarectangles 7 – 9 incorporating 4,4′‐bipyridine linkers are only able to encapsulate anthracene. However, out‐of‐cavity interactions are observed between these 4,4′‐bipyridine‐containing rectangles and pyrene, perylene, or coronene. In contrast, the small pyrazine‐containing metallarectangles 4 – 6 show no interaction in solution with this series of planar aromatic molecules.     

A three‐dimensional cadmium(II) coordination polymer: poly[[[μ‐4,4′‐(propane‐1,3‐diyl)dipyridine‐κ2N:N](μ‐3,3′‐thiodipropionato‐κ3O,O′:O)cadmium(II)] monohydrate]

In the title coordination polymer, {[Cd(C₆H₈O₄S)(C₁₃H₁₄N₂)]·H₂O}_n, the Cd^II atom displays a distorted octahedral coordination, formed by three carboxylate O atoms and one S atom from three different 3,3′‐thiodipropionate ligands, and two N atoms from two different 4,4′‐(propane‐1,3‐diyl)dipyridine ligands. The Cd^II centres are bridged through carboxylate O atoms of 3,3′‐thiodipropionate ligands and through N atoms of 4,4′‐(propane‐1,3‐diyl)dipyridine ligands to form two different one‐dimensional chains, which intersect to form a two‐dimensional layer. These two‐dimensional layers are linked by S atoms of 3,3′‐thiodipropionate ligands from adjacent layers to form a three‐dimensional network.     

Inclusion of chlorophenols by 4,4′‐(cyclohexane‐1,1‐diyl)diphenol: structures and kinetics of decomposition

The structures of the inclusion compounds 4,4′‐(cyclohexane‐1,1‐diyl)diphenol–3‐chlorophenol (1/1) and 4,4′‐(cyclohexane‐1,1‐diyl)diphenol–4‐chlorophenol (1/1), both C₁₈H₂₀O₂·C₆H₅ClO, are isostructural with respect to the host molecule and are stabilized by extensive host–host, host–guest and guest–host hydrogen bonding. The packing is characterized by layers of host and guest molecules. The kinetics of thermal decomposition follow the R2 contracting‐area model, kt = [1 − (1 − α)^½], and yield activation energies of 105 (8) and 96 (8) kJ mol⁻¹, respectively.     

Proton Insertion Chemistry of a Zinc–Organic Battery

Proton storage in rechargeable aqueous zinc‐ion batteries (ZIBs) is attracting extensive attention owing to the fast kinetics of H⁺ insertion/extraction. However, it has not been achieved in organic materials‐based ZIBs with a mild electrolyte. Now, aqueous ZIBs based on diquinoxalino [2,3‐a:2′,3′‐c] phenazine (HATN) in a mild electrolyte are developed. Electrochemical and structural analysis confirm for the first time that such Zn–HATN batteries experience a H⁺ uptake/removal behavior with highly reversible structural evolution of HATN. The H⁺ uptake/removal endows the Zn–HATN batteries with enhanced electrochemical performance. Proton insertion chemistry will broaden the horizons of aqueous Zn–organic batteries and open up new opportunities to construct high‐performance ZIBs.     

Reversible Redox Chemistry of Azo Compounds for Sodium‐Ion Batteries

Sustainable sodium‐ion batteries (SSIBs) using renewable organic electrodes are promising alternatives to lithium‐ion batteries for the large‐scale renewable energy storage. However, the lack of high‐performance anode material impedes the development of SSIBs. Herein, we report a new type of organic anode material based on azo group for SSIBs. Azobenzene‐4,4′‐dicarboxylic acid sodium salt is used as a model to investigate the electrochemical behaviors and reaction mechanism of azo compound. It exhibits a reversible capacity of 170 mAh g^?1 at 0.2C. When current density is increased to 20C, the reversible capacities of 98 mAh g^?1 can be retained for 2000 cycles, demonstrating excellent cycling stability and high rate capability. The detailed characterizations reveal that azo group acts as an electrochemical active site to reversibly bond with Na⁺. The reversible redox chemistry between azo compound and Na ions offer opportunities for developing long‐cycle‐life and high‐rate SSIBs.     

Synthesis of a soluble conjugated cumulene polymer: poly(biphenyl‐4,4′‐diyl‐1,4‐bis(4‐dodecyloxyphenyl)‐buta‐1,2,3‐triene‐1,4‐diyl)

A conjugated polymer with a butatriene segment in the main chain, poly(biphenyl‐4,4′‐diyl‐1,4‐bis(4‐dodecyloxyphenyl)buta‐1,2,3‐triene‐1,4‐diyl), was synthesized from 1,4‐bis(4‐bromophenyl)‐1,4‐bis(4‐dodecyloxyphenyl)buta‐1,2,3‐triene by dehalogenative polycondensation using Ni(cod)₂. The polymer was well soluble in usual organic solvents such as CHCl₃ and THF. Structural analyses and characterizations were carried out by IR, NMR, UV‐Vis, PL, and Raman spectroscopy, as well as electrical conductivity. It is suggested that π‐conjugation is extended to some degree through biphenylylene and butatrienylene linkages.     

A Novel Bat‐Shaped Dicyanomethylene‐4H‐pyran‐Functionalized Naphthalimide for Highly Efficient Solution‐Processed Multilevel Memory Devices

Small‐molecule‐based multilevel memory devices have attracted increasing attention because of their advantages, such as super‐high storage density, fast reading speed, light weight, low energy consumption, and shock resistance. However, the fabrication of small‐molecule‐based devices always requires expensive vacuum‐deposition techniques or high temperatures for spin‐coating. Herein, through rational tailoring of a previous molecule, DPCNCANA (4,4′‐(6,6′‐bis(2‐octyl‐1,3‐dioxo‐2,3‐dihydro‐1H‐benzo[de]isoquinolin‐6‐yl)‐9H,9′H‐[3,3′‐bicarbazole]‐9,9′‐diyl)dibenzonitrile), a novel bat‐shaped A‐D‐A‐type (A‐D‐A=acceptor–donor–acceptor) symmetric framework has been successfully synthesized and can be dissolved in common solvents at room temperature. Additionally, it has a low‐energy bandgap and dense intramolecular stacking in the film state. The solution‐processed memory devices exhibited high‐performance nonvolatile multilevel data‐storage properties with low switching threshold voltages of about −1.3 and −2.7 V, which is beneficial for low power consumption. Our result should prompt the study of highly efficient solution‐processed multilevel memory devices in the field of organic electronics.     

A Bipolar and Self‐Polymerized Phthalocyanine Complex for Fast and Tunable Energy Storage in Dual‐Ion Batteries

Bipolar redox organics have attracted interest as electrode materials for energy storage owing to their flexibility, sustainability and environmental friendliness. However, an understanding of their application in all‐organic batteries, let alone dual‐ion batteries (DIBs), is in its infancy. Herein, we propose a strategy to screen a variety of phthalocyanine‐based bipolar organics. The self‐polymerizable bipolar Cu tetraaminephthalocyanine (CuTAPc) shows multifunctional applications in various energy storage systems, including lithium‐based DIBs using CuTAPc as the cathode material, graphite‐based DIBs using CuTAPc as the anode material and symmetric DIBs using CuTAPc as both the cathode and anode materials. Notably, in lithium‐based DIBs, the use of CuTAPc as the cathode material results in a high discharge capacity of 236 mAh g^?1 at 50 mA g^?1 and a high reversible capacity of 74.3 mAh g^?1 after 4000 cycles at 4 A g^?1. Most importantly, a high energy density of 239 Wh kg^?1 and power density of 11.5 kW kg^?1 can be obtained in all‐organic symmetric DIBs.     

A Fluorescent Zirconium‐Based Metal‐Organic Framework for Selective Detection of Nitro Explosives and Metal Ions

In this work, a new porous Zr‐based metal‐organic framework (MOF ) with a large Brunner‐Emmet‐Teller (BET ) surface area was prepared by the solvothermal method using 4,4’‐(naphthalene‐1,4‐diyl)dibenzoic acid (NDDA ) as the organic ligand, and the luminescent detection performance was studied systematically. The experiments combing with computations indicate that the as‐synthesized material can sensitively and selectively detect nitro explosives and metal ions, especially for 2,4,6‐trinitrophenol (TNP ) and Fe³⁺, due to the possible electron transfer from inorganic moieties to organic moieties with naphthalene part. Interestingly, owing to its high porosity and large surface area, this Zr‐MOF showed quick luminescent response time (in 1 min) for TNP and Fe³⁺. The results obtained may provide useful information for the design of MOFs with the large permanent porosity in sensing applications for large molecules in the future.     

An Efficient Five‐Component Reaction for the Synthesis of 4,4′‐((2‐Oxoindoline‐3,3‐diyl)bis(methylene))bis(2‐aryl‐1H‐pyrrolo[3,4‐c]quinoline‐1,3(2H)‐dione) Derivatives

An efficient cascade process five‐component reaction of isatins and 3‐oxo‐N‐arylbutanamide for the synthesis of 4,4′‐((2‐oxoindoline‐3,3‐diyl)bis(methylene))bis(2‐aryl‐1H‐pyrrolo[3,4‐c]quinoline‐1,3(2H)‐dione) derivatives was reported under mild condition. The advantages of this strategy are easy to obtain raw materials, convenient one‐pot procedure, and simple operation.     

Facile Synthesis of High‐Quality Plasma‐Reduced Graphene Oxide with Ultrahigh 4,4′‐Dichlorobiphenyl Adsorption Capacity

High‐quality reduced graphene, termed PG, has been synthesized by a simple, low‐cost, and green plasma approach, and applied as adsorbent to remove 4,4′‐dichloribiphenyl (4,4′‐DCB) from aqueous solutions. As a comparison, the adsorption of 4,4′‐DCB on graphene oxide (GO) and multiwalled carbon nanotubes (MWCNTs) was also studied under the same experimental conditions. PG performs significantly better with regard to 4,4′‐DCB adsorption than GO and MWCNTs, or any reported nanomaterials, with a maximum adsorption capacity (q_max) of 1552 mg g^?1 at pH 7.0. The high affinity of 4,4′‐DCB to PG is mainly a result of strong π–π interactions, as also confirmed by DFT calculations. The results reveal that PG sheets hold promise for the removal of persistent organic pollutants. We expect possible applications of this fast and mild plasma technique in the fabrication of nanomaterials and envisage their use in a variety of advanced chemical processes.     

Arylamino‐functionalized fluorene‐ and carbazole‐based copolymers: Color‐tuning their CdTe nanocrystal composites from red to white

Four alternating arylamino‐functionalized copolymers were synthesized in a Suzuki copolymerization applying 4, 4′‐(2,7‐dibromo‐9H‐fluorene‐9,9‐diyl)dianiline, 4,4′‐(2,7‐dibromo‐9H‐fluorene‐9,9‐diyl)bis(N,N‐diphenylaniline), 4‐(3,6‐dibromo‐9H‐ carbazol‐9‐yl)aniline and 4‐(3,6‐dibromo‐9H‐carbazol‐9‐yl)‐N,N‐diphenylaniline in combination with 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(1,3,2‐dioxaborinane). The resulting novel alternating copolymers were fully characterized. The copolymers revealed blue light emission and wide optical bandgaps of at least 2.93 eV for the fluorene‐based and 3.07 eV for the carbazole‐based polymers. The amino‐functions allow to tie semiconducting CdTe nanocrystals (NCs) and to synthesize a series of composites with CdTe NCs. Moreover, tuning the emission color over a wide range by tying these CdTe NCs results in a facile preparation of organic–inorganic semiconductor composites with emission colors “à la carte.” © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Linear hydrogen‐bonded molecular tapes in the cocrystals of squaric acid with 4,4′‐dipyridylacetylene and 1,2‐bis(4‐pyridyl)ethylene

The title compounds, 4,4′‐(ethyne‐1,2‐diyl)­dipyridinium bis(squarate), C₁₂H₁₀N₂²⁺·2C₄HO₄^?, and 4,4′‐(ethene‐1,2‐diyl)­dipyridinium bis­(squarate), C₁₂H₁₂N₂²⁺·2C₄HO₄^?, are isomorphous and crystallize in space group P. The cocrystals contain linear hydrogen‐bonded molecular tape structures along the [120] direction. The squarate monoanions form a ten‐membered dimer linked by two intermolecular O—H?O hydrogen bonds. Each component mol­ecule forms a segregated stack along the c axis. The bond lengths of the squarate monoanion indicate delocalization of the enolate anion.     

A Liquid Crystalline Oligomer Exhibiting Nematic and Twist‐Bend Nematic Mesophases

The twist‐bend nematic phase (N_TB) has been described as the structural link between the untilted uniaxial nematic phase (N) and the helical chiral nematic phase (N*). The N_TB phase exhibits phenomena of fundamental importance to science, that is, 1) the spontaneous formation of a helical pitch on the nanometer scale in a fluid and 2) the spontaneous breaking of mirror symmetry, leading to the emergence of chiral domains in an achiral system. In this Communication, we present a study on T4₉ [bis(4‐(9‐(4‐((4‐cyanobenzoyl)oxy)phenyl)nonyl)phenyl) 4,4′‐(nonane‐1,9‐diyl)dibenzoate], a liquid‐crystalline oligomer exhibiting the twist‐bend nematic phase, which has a molecular length that is of comparable dimensions to the sub‐10 nm pitch determined for CB9CB, and provide new insights into the differentiation between the nano‐ and macro‐science for self‐assembling supermolecular systems.     

Tuning the energy level of TAPC: crystal structure and photophysical and electrochemical properties of 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methoxyphenyl)aniline]

The energy level of a hole‐transporting material (HTM) in organic electronics, such as organic light‐emitting diodes (OLEDs) and perovskite solar cells (PSCs), is important for device efficiency. In this regard, we prepared 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methoxyphenyl)aniline] ( TAPC‐OMe ), C₄₆H₄₆N₂O₄, to tune the energy level of 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methylphenyl)aniline] ( TAPC ), which is a well‐known HTM commonly used in OLED applications. A systematic characterization of TAPC‐OMe , including ¹H and ¹³C NMR, elemental analysis, UV–Vis absorption, fluorescence emission, density functional theory (DFT) calculations and single‐crystal X‐ray diffraction, was performed. TAPC‐OMe crystallized in the triclinic space group P, with two molecules in the asymmetric unit. The dihedral angles between the central amine triangular planes and those of the phenyl groups varied from 26.56 (9) to 60.34 (8)° due to the steric hindrance of the central cyclohexyl ring. This arrangement might be induced by weak hydrogen bonds and C—H…π(Ph) interactions in the extended structure. The emission maxima of TAPC‐OMe showed a significant bathochomic shift compared to that of TAPC . A strong dependency of the oxidation potentials on the nature of the electron‐donating ability of substituents was confirmed by comparing oxidation potentials with known Hammett parameters (σ).