Dynamic Kinetic Asymmetric Transformations of β‐Stereogenic α‐Ketoesters by Direct Aldolization

Dynamic kinetic asymmetric transformations (DyKAT) of racemic β‐bromo‐α‐keto esters by direct aldolization of nitromethane and acetone provide access to fully substituted α‐glycolic acid derivatives bearing a β‐stereocenter. The aldol adducts are obtained in excellent yield with high relative and absolute stereocontrol under mild reaction conditions. Mechanistic studies determined that the reactions proceed through a facile catalyst‐mediated racemization of the β‐bromo‐α‐keto esters under a DyKAT Type I manifold.     

Supported Gold Nanoparticles for Efficient α‐Oxygenation of Secondary and Tertiary Amines into Amides

Although the α‐oxygenation of amines is a highly attractive method for the synthesis of amides, efficient catalysts suited to a wide range of secondary and tertiary alkyl amines using O₂ as the terminal oxidant have no precedent. This report describes a novel, green α‐oxygenation of a wide range of linear and cyclic secondary and tertiary amines mediated by gold nanoparticles supported on alumina (Au/Al₂O₃). The observed catalysis was truly heterogeneous, and the catalyst could be reused. The present α‐oxygenation utilizes O₂ as the terminal oxidant and water as the oxygen atom source of amides. The method generates water as the only theoretical by‐product, which highlights the environmentally benign nature of the present reaction. Additionally, the present α‐oxygenation provides a convenient method for the synthesis of ¹⁸O‐labeled amides using H₂¹⁸O as the oxygen source.     

Thio‐bromo “Click,” post‐polymerization strategy for functionalizing ring opening metathesis polymerization (ROMP)‐derived materials

The use of a thio‐bromo click strategy as an efficient postpolymerization tool is described. Norbornene derivatives bearing an α‐bromo ester could be polymerized using Grubbs 2^nd generation initiator to provide α‐bromo ester‐containing homo‐and block copolymers that could be efficiently functionalized through reactions with various thiols. A one‐pot strategy was also used, in which up to four different thiols were reacted simultaneously. This chemistry could also be used as an efficient cross‐linking strategy to form ROMP‐based gels as well as a tool for terminal functionalization of polypropylene‐based oligomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 179–185     

5‐Benzoyl­amino‐3‐bromo‐4‐(4‐methoxy­phenyl)‐4,5‐di­hydro­isoxazole‐5‐carboxyl­ic acid

The title compound, C₁₈H₁₅BrN₂O₅, a promising N‐protected α‐amino acid, was synthesized directly from an unusual bromo dipole and a 4‐(aryl­methyl­ene)­oxazolone. The crystal packing of the title compound is a racemic mixture. Peculiar graph‐set motifs driven by the most important hydrogen bonds are described.     

Enantioselective Synthesis of α‐Hydroxy Amides and β‐Amino Alcohols from α‐Keto Amides

Synthesis of enantiomerically enriched α‐hydroxy amides and β‐amino alcohols has been accomplished by enantioselective reduction of α‐keto amides with hydrosilanes. A series of α‐keto amides were reduced in the presence of chiral Cu^II/(S)‐DTBM‐SEGPHOS catalyst to give the corresponding optically active α‐hydroxy amides with excellent enantioselectivities by using (EtO)₃SiH as a reducing agent. Furthermore, a one‐pot complete reduction of both ketone and amide groups of α‐keto amides has been achieved using the same chiral copper catalyst followed by tetra‐n‐butylammonium fluoride (TBAF) catalyst in presence of (EtO)₃SiH to afford the corresponding chiral β‐amino alcohol derivatives.     

Geometry‐Retentive C‐Alkenylation of Lithiated α‐Aminonitriles: Quaternary α‐Alkenyl Amino Acids and Hydantoins

α‐Amino nitriles tethered to alkenes through a urea linkage undergo intramolecular C‐alkenylation on treatment with base by attack of the lithionitrile derivatives on the N′‐alkenyl group. A geometry‐retentive alkene shift affords stereospecifically the E or Z isomer of the 5‐alkenyl‐4‐iminohydantoin products from the corresponding starting E ‐ or Z ‐N ′‐alkenyl urea, each of which may be formed from the same N ‐allyl precursor by stereodivergent alkene isomerization. The reaction, formally a nucleophilic substitution at an sp² carbon atom, allows the direct regioselective incorporation of mono‐, di‐, tri‐, and tetrasubstituted olefins at the α‐carbon of amino acid derivatives. The initially formed 5‐alkenyl iminohydantoins may be hydrolyzed and oxidatively deprotected to yield hydantoins and unsaturated α‐quaternary amino acids.     

Cu/Pd Synergistic Dual Catalysis: Asymmetric α‐Allylation of an α‐CF3 Amide

Despite the burgeoning demand for fluorine‐containing chemical entities, the construction of CF₃‐containing stereogenic centers has remained elusive. Herein, we report the strategic merger of Cu^I/base‐catalyzed enolization of an α‐CF₃ amide and Pd⁰‐catalyzed allylic alkylation in an enantioselective manner to deliver chiral building blocks bearing a stereogenic carbon center connected to a CF₃, an amide carbonyl, and a manipulable allylic group. The phosphine complexes of Cu^I and Pd⁰ engage in distinct catalytic roles without ligand scrambling to render the dual catalysis operative to achieve asymmetric α‐allylation of the amide. The stereoselective cyclization of the obtained α‐CF₃‐γ,δ‐unsaturated amides to give tetrahydropyran and γ‐lactone‐fused cyclopropane skeletons highlights the synthetic utility of the present catalytic method as a new entry to non‐racemic CF₃‐containing compounds.     

From α‐carbamoyl‐α‐cyano­oxiranes to 3‐halogenopyruv­amides

The crystal structures of the first stable α‐diol from the α‐halogenopyruv­amide series, 3‐chloro‐2,2‐di­hydroxy‐3‐phenyl­propan­amide, C₉H₁₀­ClNO₃, and three products [3‐(4‐chloro­phenyl)‐2‐cyano‐2,3‐epoxy­propan­amide, C₁₀H₇­ClN₂O₂, 3‐bromo‐2‐cyano‐2‐hydroxy‐3‐p‐tolyl­propan­amide, C₁₁H₁₁Br­N₂O₂, 3‐bromo‐2‐oxo‐3‐p‐tolyl­propan­amide, C₁₀H₁₀­BrNO₂] obtained during the systematic synthesis of α‐halogenopyruv­amides are reported. The crystal structures are dominated by hydrogen bonds involving an amide group. The stability of the geminal diol could be ascribed to hydrogen bonds which involve both hydroxyl groups.     

A Bioinspired Synthesis of (±)‐Rubrobramide, (±)‐Flavipucine,and (±)‐Isoflavipucine

A biomimetic synthesis of naturally occurring lactams rubrobramide, flavipucine, and isoflavipucine is described. The key step is a regioselective Darzens reaction between isobutyl glyoxal and an α‐bromo‐β‐ketoamide. The construction of the core tricyclic ring system of rubrobramide was achieved by a cascade reaction in a single step from an α,β‐epoxy‐γ‐lactam. Furthermore, the absolute configuration of naturally occurring (+)‐rubrobramide was determined by vibrational circular dichroism. (±)‐Flavipucine and (±)‐isoflavipucine were synthesized from an epoxyimide, which was prepared by reaction of isobutyl glyoxal with a protected α‐bromo‐β‐ketoamide. Deprotection of the epoxyimide and formation of the pyridone ring gave (±)‐flavipucine, which was converted into (±)‐isoflavipucine by thermal isomerization.     

Transition‐Metal‐Free Coupling of Alkynes with α‐Bromo Carbonyl Compounds: An Efficient Approach towards β,γ‐Alkynoates and Allenoates

A direct transition‐metal‐free coupling between alkynes and α‐bromo carbonyl compounds has been developed with ultraviolet (UV) light in aqueous media. This method represents a facile approach to synthetically useful β,γ‐alkynyl esters and amides stereoselectively from two readily available starting materials. As an example of the synthetic application of the products, the alkynyl esters were readily converted into allenoates.     

A Bioinspired Synthesis of (±)‐Rubrobramide, (±)‐Flavipucine,and (±)‐Isoflavipucine

A biomimetic synthesis of naturally occurring lactams rubrobramide, flavipucine, and isoflavipucine is described. The key step is a regioselective Darzens reaction between isobutyl glyoxal and an α‐bromo‐β‐ketoamide. The construction of the core tricyclic ring system of rubrobramide was achieved by a cascade reaction in a single step from an α,β‐epoxy‐γ‐lactam. Furthermore, the absolute configuration of naturally occurring (+)‐rubrobramide was determined by vibrational circular dichroism. (±)‐Flavipucine and (±)‐isoflavipucine were synthesized from an epoxyimide, which was prepared by reaction of isobutyl glyoxal with a protected α‐bromo‐β‐ketoamide. Deprotection of the epoxyimide and formation of the pyridone ring gave (±)‐flavipucine, which was converted into (±)‐isoflavipucine by thermal isomerization.     

Direct Cu‐Catalyzed Allylic Acetoxylation of Δ5‐Steroids at 7‐Position

The efficiency and selectivity of Cu‐catalyzed allylic acetoxylation of alkene in different solvent systems is improved by the presence of different metallic salts in the reaction medium. The methodology is particularly well employed for the direct allylic acetoxylation of Δ⁵‐steroids at 7‐position, for which the resulting acetoxylated product obtained was exclusively α‐isomer. Excellent yield was achieved (up to 90%) under optimized conditions, while significantly reducing the costs and environmental hazards and increasing the yield as compared to the other previously reported methods.     

Stereoselective synthesis of conformationally constrained tropane analogues: 6‐Chloro‐2,5‐diazatetracyclo[8.5.0.02,13.04,9]pentadeca‐4,6,8‐triene‐11‐one and 6‐chloro‐2,7‐diazatetracyclo‐[8.5.0.02,13.04,9]pentadeca‐4,6,8‐triene‐11‐one

Two conformationally constrained tropane derivatives were prepared as rigid nicotinic acetylcholine receptor ligands. A palladium catalyzed intramolecular α‐arylation reaction was employed to generate the tricyclic compounds in good yields from N‐(bromo‐chloropyridylmethyl)‐8‐azabicyclo[3.2.1]octan‐3‐ones.     

Derivatives of α‐ and β‐S‐thiophosphates of 2‐bromo‐2‐deoxy‐D‐hexopyranose

The first examples of S‐thiophosphate derivatives of 2‐bromo‐2‐deoxy sugars 7–12 were synthesized by reacting alkyl ammonium salts 1–4 of thiophosphoric acids with α‐1,2‐cis (5) or α‐1,2‐trans dibromo sugars (6) and addition of free thiophosphoric acids 1a or 2a to 2‐bromo‐D‐glucal (13). It was observed that the solvent determines formation of either the O‐ or S‐glycosyl compound. β‐Thiophosphates can be transformed to the α‐configuration in the presence of acid in quantitative yield. The structures of the synthesized derivatives of 7–12 were confirmed by spectroscopic methods. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 465–470, 1999     

Palladium‐Catalyzed Oxidative Difunctionalization of Alkenes with α‐Carbonyl Alkyl Bromides Initiated through a Heck‐type Insertion: A Route to Indolin‐2‐ones

The oxidative interception of various σ‐alkyl palladium(II) intermediates with additional reagents for the difunctionalization of alkenes is an important research area. A new palladium‐catalyzed oxidative difunctionalization reaction of alkenes with α‐carbonyl alkyl bromides is described, in which the σ‐alkyl palladium(II) intermediate is generated through a Heck insertion and trapped using an aryl C(sp²)? H bond. This method can be applied to various α‐carbonyl alkyl bromides, including primary, secondary, and tertiary α‐bromoalkyl esters, ketones, and amides.     

Enantio‐ and Site‐Selective α‐Fluorination of N‐Acyl 3,5‐Dimethylpyrazoles Catalyzed by Chiral π–CuII Complexes

Catalytic enantioselective α‐fluorination reactions of carbonyl compounds are among the most powerful and efficient synthetic methods for constructing optically active α‐fluorinated carbonyl compounds. Nevertheless, α‐fluorination of α‐nonbranched carboxylic acid derivatives is still a big challenge because of relatively high pK_a values of their α‐hydrogen atoms and difficulty of subsequent synthetic transformation without epimerization. Herein we show that chiral copper(II) complexes of 3‐(2‐naphthyl)‐l ‐alanine‐derived amides are highly effective catalysts for the enantio‐ and site‐selective α‐fluorination of N‐(α‐arylacetyl) and N‐(α‐alkylacetyl) 3,5‐dimethylpyrazoles. The substrate scope of the transformation is very broad (25 examples including a quaternary α‐fluorinated α‐amino acid derivative). α‐Fluorinated products were converted into the corresponding esters, secondary amides, tertiary amides, ketones, and alcohols with almost no epimerization in high yield.     

Enantioselective Construction of α‐Chiral Silanes by Nickel‐Catalyzed C(sp3)−C(sp3) Cross‐Coupling

An enantioselective C(sp³)?C(sp³) cross‐coupling of racemic α‐silylated alkyl iodides and alkylzinc reagents is reported. The reaction is catalyzed by NiCl₂/(S,S)‐Bn‐Pybox and yields α‐chiral silanes with high enantiocontrol. The catalyst system does not promote the cross‐coupling of the corresponding carbon analogue, corroborating the stabilizing effect of the silyl group on the alkyl radical intermediate (α‐silicon effect). Both coupling partners can be, but do not need to be, functionalized, and hence, even α‐chiral silanes with no functional group in direct proximity of the asymmetrically substituted carbon atom become accessible. This distinguishes the new method from established approaches for the synthesis of α‐chiral silanes.     

Measurements of the kinetics of the OH + α‐pinene and OH + β‐pinene reactions at low pressure

The rate constants for the OH + α‐pinene and OH + β‐pinene reactions have been measured in 5 Torr of He using discharge‐flow systems coupled with resonance fluorescence and laser‐induced fluorescence detection of the OH radical. At room temperature, the measured effective bimolecular rate constant for the OH + α‐pinene reaction was (6.08 ± 0.24) × 10^?11 cm³ molecule^?1 s^?1. These results are in excellent agreement with previous absolute measurements of this rate constant, but are approximately 13% greater than the value currently recommended for atmospheric modeling. The measured effective bimolecular rate constant for the OH + β‐pinene reaction at room temperature was (7.72 ± 0.44) × 10^?11 cm³ molecule^?1 s^?1, in excellent agreement with previous measurements and current recommendations. Above 300 K, the effective bimolecular rate constants for these reactions display a negative temperature dependence suggesting that OH addition dominates the reaction mechanisms under these conditions. This negative temperature dependence is larger than that observed at higher pressures. The measured rate constants for the OH + α‐pinene and OH + β‐pinene reactions are in good agreement with established reactivity trends relating the rate constant for OH + alkene reactions with the ionization potential of the alkene when ab initio calculated energies for the highest occupied molecular orbital are used as surrogates for the ionization potentials for α‐ and β‐pinene. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 300–308, 2002     

Direct Zinc(II)‐Catalyzed Enantioconvergent Additions of Terminal Alkynes to α‐Keto Esters

The addition of terminal alkynes to racemic β‐stereogenic α‐keto esters was achieved in high levels of stereoselectivity, affording versatile tertiary propargylic alcohols containing two stereocenters. This environmentally benign enantioconvergent reaction proceeds with perfect atom economy, requires no solvent, and is catalyzed by a non‐toxic zinc salt. The alkyne moiety can be leveraged in downstream transformations including hydrogenation to the corresponding saturated tertiary alcohol, which represents the product of a formal enantioconvergent aliphatic nucleophile addition.     

Synthesis and NMR Study of α‐Keto Stabilized Ylides of the Type RCOCH=PAr3, (R=MeO‐C6H4, Cl‐C6H4, NO2‐C6H4, α‐Thiophenyl and Naphthyl; Ar = p‐Tolyl or Phenyl)

Synthesis and characterization of five new phosphonium salts and related phosphorus ylides of the type R‐COCH=PAr₃ are reported. The reaction of bromo 4′‐methoxo/chloro/nitro acetophenone, α‐thiophenyl and naphthoyl acetophenone with triphenylphosphine or triparatolylphosphine in acetone gives phosphonium salts. Dehydrogenation of these salts in aqueous sodium hydroxide solution form ylides. Characterization of obtained compounds was performed by IR, ¹H, ¹³C, ³¹PNMR and elemental analysis.