Hollow Chevrel‐Phase NiMo3S4 for Hydrogen Evolution in Alkaline Electrolytes

Electrochemical water splitting to generate molecular hydrogen requires catalysts that are cheap, active, and stable, particularly for alkaline electrolyzers, where the cathodic hydrogen evolution reaction is slower in base than in acid even on platinum. Herein, we describe the synthesis of new hollow Chevrel‐phase NiMo₃S₄ and its alkaline hydrogen evolution reaction (HER) performance: onset potential of ?59 mV, Tafel slope of 98 mV per decade, and exchange current density of 3.9×10^?2 mA cm^?2. This Chevrel‐phase chalcogenide also demonstrates outstanding long‐term stability under harsh HER cycling conditions. Chevrel‐phase nanomaterials show promise as efficient, low‐cost catalysts for alkaline electrolyzers.     

Synergistic Doping and Intercalation: Realizing Deep Phase Modulation on MoS2 Arrays for High‐Efficiency Hydrogen Evolution Reaction

A synergistic N doping plus PO₄^3? intercalation strategy is used to induce high conversion (ca. 41 %) of 2H‐MoS₂ into 1T‐MoS₂, which is much higher than single N doping (ca. 28 %) or single PO₄^3? intercalation (ca. 10 %). A scattering mechanism is proposed to illustrate the synergistic phase transformation from the 2H to the 1T phase, which was confirmed by synchrotron radiation and spherical aberration TEM. To further enhance reaction kinetics, the designed (N,PO₄^3?)‐MoS₂ nanosheets are combined with conductive vertical graphene (VG) skeleton forming binder‐free arrays for high‐efficiency hydrogen evolution reaction (HER). Owing to the decreased band gap, lower d‐band center, and smaller hydrogen adsorption/desorption energy, the designed (N,PO₄^3?)‐MoS₂/VG electrode shows excellent HER performance with a lower Tafel slope and overpotential than N‐MoS₂/VG, PO₄^3?‐MoS₂/VG counterparts, and other Mo‐base catalysts in the literature.     

Porous Molybdenum‐Based Hybrid Catalysts for Highly Efficient Hydrogen Evolution

We have synthesized a porous Mo‐based composite obtained from a polyoxometalate‐based metal–organic framework and graphene oxide (POMOFs/GO) using a simple one‐pot method. The MoO₂@PC‐RGO hybrid material derived from the POMOFs/GO composite is prepared at a relatively low carbonization temperature, which presents a superior activity for the hydrogen‐evolution reaction (HER) in acidic media owing to the synergistic effects among highly dispersive MoO₂ particles, phosphorus‐doped porous carbon, and RGO substrates. MoO₂@PC‐RGO exhibits a very positive onset potential close to that of 20 % Pt/C, low Tafel slope of 41 mV dec^?1, high exchange current density of 4.8×10^?4 A cm^?2, and remarkable long‐term cycle stability. It is one of the best high‐performance catalysts among the reported nonprecious metal catalysts for HER to date.     

Channel‐Rich RuCu Nanosheets for pH‐Universal Overall Water Splitting Electrocatalysis

Channel‐rich RuCu snowflake‐like nanosheets (NSs) composed of crystallized Ru and amorphous Cu were used as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting in pH‐universal electrolytes. The optimized RuCu NSs/C‐350 °C and RuCu NSs/C‐250 °C show attractive activities of OER and HER with low overpotentials and small Tafel slopes, respectively. When applied to overall water splitting, the optimized RuCu NSs/C can reach 10 mA cm^?2 at cell voltages of only 1.49, 1.55, 1.49 and 1.50 V in 1 m KOH, 0.1 m KOH, 0.5 m H₂SO₄ and 0.05 m H₂SO₄, respectively, much lower than those of commercial Ir/C∥Pt/C. The optimized electrolyzer exhibits superior durability with small potential change after up to 45 h in 1 m KOH, showing a class of efficient functional electrocatalysts for overall water splitting.     

Tailoring the d‐Band Centers Enables Co4N Nanosheets To Be Highly Active for Hydrogen Evolution Catalysis

Endowing materials with specific functions that are not readily available is always of great importance, but extremely challenging. Co₄N, with its beneficial metallic characteristics, has been proved to be highly active for the oxidation of water, while it is notoriously poor for catalyzing the hydrogen evolution reaction (HER), because of its unfavorable d‐band energy level. Herein, we successfully endow Co₄N with prominent HER catalytic capability by tailoring the positions of the d‐band center through transition‐metal doping. The V‐doped Co₄N nanosheets display an overpotential of 37 mV at 10 mA cm^?2, which is substantially better than Co₄N and even close to the benchmark Pt/C catalysts. XANES, UPS, and DFT calculations consistently reveal the enhanced performance is attributed to the downshift of the d‐band center, which helps facilitate the H desorption. This concept could provide valuable insights into the design of other catalysts for HER and beyond.     

Graphitic Carbon Nitride Nanoribbons: Graphene‐Assisted Formation and Synergic Function for Highly Efficient Hydrogen Evolution

The development of new promising metal‐free catalysts is of great significance for the electrocatalytic hydrogen evolution reaction (HER). Herein, a rationally assembled three‐dimensional (3D) architecture of 1D graphitic carbon nitride (g‐C₃N₄) nanoribbons with 2D graphene sheets has been developed by a one‐step hydrothermal method. Because of the multipathway of charge and mass transport, the hierarchically structured g‐C₃N₄ nanoribbon–graphene hybrids lead to a high electrocatalytic ability for HER with a Tafel slope of 54 mV decade^?1, a low onset overpotential of 80 mV and overpotential of 207 mV to approach a current of 10 mA cm^?2, superior to those non‐metal materials and well‐developed metallic catalysts reported previously. This work presents a great advance for designing and developing highly efficient metal‐free catalyst for hydrogen evolution.     

Rational Design of Single Molybdenum Atoms Anchored on N‐Doped Carbon for Effective Hydrogen Evolution Reaction

The highly efficient electrochemical hydrogen evolution reaction (HER) provides a promising pathway to resolve energy and environment problems. An electrocatalyst was designed with single Mo atoms (Mo‐SAs) supported on N‐doped carbon having outstanding HER performance. The structure of the catalyst was probed by aberration‐corrected scanning transmission electron microscopy (AC‐STEM) and X‐ray absorption fine structure (XAFS) spectroscopy, indicating the formation of Mo‐SAs anchored with one nitrogen atom and two carbon atoms (Mo₁N₁C₂). Importantly, the Mo₁N₁C₂ catalyst displayed much more excellent activity compared with Mo₂C and MoN, and better stability than commercial Pt/C. Density functional theory (DFT) calculation revealed that the unique structure of Mo₁N₁C₂ moiety played a crucial effect to improve the HER performance. This work opens up new opportunities for the preparation and application of highly active and stable Mo‐based HER catalysts.     

Activation of MoS2 Basal Planes for Hydrogen Evolution by Zinc

Molybdenum disulfide (MoS₂) has been widely studied as a potential earth‐abundant electrocatalyst for the hydrogen‐evolution reaction (HER). Defect engineering and heteroelemental doping are effective methods to enhance the catalytic activity in the HER, so exploring an efficient route to simultaneously achieve in‐plane vacancy engineering and elemental doping of MoS₂ is necessary. In this study, Zinc, a low‐cost and moderately active metal, has been used to realize this strategy by generation of sulfur vacancies and zinc doping on MoS₂ in one step. Density functional theory calculations reveal that the zinc atoms not only lower the formation energy of S vacancies, but also help to decrease ΔG_H of S‐vacancy sites near the Zn atoms. At an optimal zinc‐reduced MoS₂ (Zn@MoS₂) example, the activated basal planes contribute to the HER activity with an overpotential of ?194 mV at 10 mA cm^?2 and a low Tafel slope of 78 mV/dec.     

Scandium‐Catalyzed Self‐Assisted Polar Co‐monomer Enchainment in Ethylene Polymerization

Direct coordinative copolymerization of ethylene with functionalized co‐monomers is a long‐sought‐after approach to introducing polyolefin functionality. However, functional‐group Lewis basicity typically depresses catalytic activity and co‐monomer incorporation. Finding alternatives to intensively studied group 4 d⁰ and late‐transition‐metal catalysts is crucial to addressing this long‐standing challenge. Shown herein is that mono‐ and binuclear organoscandium complexes with a borate cocatalyst are active for ethylene + amino olefin [AO; H₂C=CH(CH₂)_nNR₂] copolymerizations in the absence of a Lewis‐acidic masking reagent. Both activity (up to 4.2×10² kg mol⁻¹⋅h^−1> atm^−1>) and AO incorporation (up to 12 % at 0.2 m [AO]) are appreciable. Linker‐length‐dependent (n) AO incorporation and mechanistic probes support an unusual functional‐group‐assisted enchainment mechanism. Furthermore, the binuclear catalysts exhibit enhanced AO tolerance and enhanced long chain AO incorporation.     

Heterostructures Composed of N‐Doped Carbon Nanotubes Encapsulating Cobalt and β‐Mo2C Nanoparticles as Bifunctional Electrodes for Water Splitting

Herein, we demonstrate the use of heterostructures comprised of Co/β‐Mo₂C@N‐CNT hybrids for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline electrolyte. The Co can not only create a well‐defined heterointerface with β‐Mo₂C but also overcomes the poor OER activity of β‐Mo₂C, thus leading to enhanced electrocatalytic activity for HER and OER. DFT calculations further proved that cooperation between the N‐CNTs, Co, and β‐Mo₂C results in lower energy barriers of intermediates and thus greatly enhances the HER and OER performance. This study not only provides a simple strategy for the construction of heterostructures with nonprecious metals, but also provides in‐depth insight into the HER and OER mechanism in alkaline solution.     

A General Route to Prepare Low‐Ruthenium‐Content Bimetallic Electrocatalysts for pH‐Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm^?2 in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm^?2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1−xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g⁻¹ h⁻¹ and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

Hierarchical Nanoboxes Composed of Co9S8−MoS2 Nanosheets as Efficient Electrocatalysts for the Hydrogen Evolution Reaction

The development of hydrogen evolution catalysts based on nonprecious metals is essential for the practical application of water‐splitting devices. Herein, the synthesis of Co₉S₈?MoS₂ hierarchical nanoboxes (HNBs) as efficient catalysts for the hydrogen evolution reaction (HER) is reported. The surface of the hollow cubic structure was organized by CoMoS₄ nanosheets formed through the reaction of MoS₄^2? and Co²⁺ released from the cobalt zeolite imidazole framework (ZIF‐67) templates under reflux in a mixture of water/ethanol. The formation process for the CoMoS₄ HNB structures was characterized by TEM images recorded at various reaction temperatures. The amorphous CoMoS₄ HNBs were converted through sequential heat treatments into CoS_x?MoS₂ and Co₉S₈?MoS₂ HNBs. Owing to their unique chemical compositions and structural features, Co₉S₈?MoS₂ HNBs have a high specific surface area (124.6 m² g^?1) and superior electrocatalytic performances for the HER. The Co₉S₈?MoS₂ HNBs exhibit a low overpotential (η₁₀) of 106 mV, a low Tafel slope of 51.8 mV dec^?1, and long‐term stability in an acidic medium. The electrocatalytic activity of Co₉S₈?MoS₂ HNBs is superior to that of recently reported values, and these HNBs prove to be promising candidates for the HER.     

One‐Step Synthesis of Self‐Supported Nickel Phosphide Nanosheet Array Cathodes for Efficient Electrocatalytic Hydrogen Generation

Nickel phosphide is an emerging low‐cost, earth‐abundant catalyst that can efficiently reduce water to generate hydrogen. However, the synthesis of nickel phosphide catalysts usually involves multiple steps and is laborious. Herein, a convenient and straightforward approach to the synthesis of a three‐dimensional (3D) self‐supported biphasic Ni₅P₄‐Ni₂P nanosheet (NS) array cathode is presented, which is obtained by direct phosphorization of commercially available nickel foam using phosphorus vapor. The synthesized 3D Ni₅P₄‐Ni₂P‐NS array cathode exhibits outstanding electrocatalytic activity and long‐term durability toward the hydrogen evolution reaction (HER) in acidic medium. The fabrication procedure reported here is scalable, showing substantial promise for use in water electrolysis. More importantly, the approach can be readily extended to synthesize other self‐supported transition metal phosphide HER cathodes.     

Nanoporous Graphene with Single‐Atom Nickel Dopants: An Efficient and Stable Catalyst for Electrochemical Hydrogen Production

Single‐atom nickel dopants anchored to three‐dimensional nanoporous graphene can be used as catalysts of the hydrogen evolution reaction (HER) in acidic solutions. In contrast to conventional nickel‐based catalysts and graphene, this material shows superior HER catalysis with a low overpotential of approximately 50 mV and a Tafel slope of 45 mV dec^?1 in 0.5 M H₂SO₄ solution, together with excellent cycling stability. Experimental and theoretical investigations suggest that the unusual catalytic performance of this catalyst is due to sp–d orbital charge transfer between the Ni dopants and the surrounding carbon atoms. The resultant local structure with empty C–Ni hybrid orbitals is catalytically active and electrochemically stable.     

Electrochemical Oxidation of 5‐Hydroxymethylfurfural on Nickel Nitride/Carbon Nanosheets: Reaction Pathway Determined by In Situ Sum Frequency Generation Vibrational Spectroscopy

2,5‐Furandicarboxylic acid was obtained from the electrooxidation of 5‐hydroxymethylfurfural (HMF) with non‐noble metal‐based catalysts. Moreover, combining the biomass oxidation with the hydrogen evolution reaction (HER) increased the energy conversion efficiency of an electrolyzer and also generated value‐added products at both electrodes. Here, the reaction pathway on the surface of a carbon‐coupled nickel nitride nanosheet (Ni₃N@C) electrode was evaluated by surface‐selective vibrational spectroscopy using sum frequency generation (SFG) during the electrochemical oxidation. The Ni₃N@C electrode shows catalytic activities for HMF oxidation and the HER. As the first in situ SFG study on transition‐metal nitride for the electrooxidation upgrade of HMF, this work not only demonstrates that the reaction pathway of electrochemical oxidation but also provides an opportunity for nonprecious metal nitrides to simultaneously upgrade biomass and produce H₂ under ambient conditions.     

Surfactant‐Assisted Phase‐Selective Synthesis of New Cobalt MOFs and Their Efficient Electrocatalytic Hydrogen Evolution Reaction

Reported herein are two new polymorphic Co‐MOFs (CTGU‐5 and ‐6) that can be selectively crystallized into the pure 2D or 3D net using an anionic or neutral surfactant, respectively. Each polymorph contains a H₂O molecule, but differs dramatically in its bonding to the framework, which in turn affects the crystal structure and electrocatalytic performance for hydrogen evolution reaction (HER). Both experimental and computational studies find that 2D CTGU‐5 which has coordinates water and more open access to the cobalt site has higher electrocatalytic activity than CTGU‐6 with the lattice water. The integration with co‐catalysts, such as acetylene black (AB) leads to a composite material, AB&CTGU‐5 (1:4) with very efficient HER catalytic properties among reported MOFs. It exhibits superior HER properties including a very positive onset potential of 18 mV, low Tafel slope of 45 mV dec⁻¹, higher exchange current density of 8.6×10⁻⁴ A cm⁻², and long‐term stability.     

Carbon Nanotubes Decorated with CoP Nanocrystals: A Highly Active Non‐Noble‐Metal Nanohybrid Electrocatalyst for Hydrogen Evolution

The development of effective and inexpensive hydrogen evolution reaction (HER) electrocatalysts for future renewable energy systems is highly desired. The strongly acidic conditions in proton exchange membranes create a need for acid‐stable HER catalysts. A nanohybrid that consists of carbon nanotubes decorated with CoP nanocrystals (CoP/CNT) was prepared by the low‐temperature phosphidation of a Co₃O₄/CNT precursor. As a novel non‐noble‐metal HER catalyst operating in acidic electrolytes, the nanohybrid exhibits an onset overpotential of as low as 40 mV, a Tafel slope of 54 mV dec^?1, an exchange current density of 0.13 mA cm^?2, and a Faradaic efficiency of nearly 100 %. This catalyst maintains its catalytic activity for at least 18 hours and only requires overpotentials of 70 and 122 mV to attain current densities of 2 and 10 mA cm^?2, respectively.     

An Efficient RuTe2/Graphene Catalyst for Electrochemical Hydrogen Evolution Reaction in Acid Electrolyte

Developing efficient powder catalysts for hydrogen evolution reaction (HER) in the acidic electrolyte is significant for hydrogen generation in the proton exchange membrane (PEM) water electrolysis technique. Herein, we demonstrated an efficient catalyst for HER in the acid media based on the graphene supported ruthenium telluride nanoparticles (RuTe₂/Gr). The catalysts were easily fabricated by a facile microwave irradiation/thermal annealing approach, and orthorhombic RuTe₂ crystals were found anchored over the graphene surface. The defective structure was demonstrated in the aberration‐corrected transmission electron microscopy images for RuTe₂ crystals and graphene support. This catalyst required an overpotential of 72 mV to drive 10 mA cm^?2 for HER when loading on the inert glass carbon electrode; Excellent catalytic stability in acidic media was also observed to offer 10 mA cm^?2 for 10 hours. The Volmer‐Tafel mechanism was indicated on RuTe₂/Gr catalyst by Tafel slope of 33 mV dec^?1, similar to that of Pt/C catalysts. The high catalytic performance of RuTe₂/Gr could be attributed to its high dispersion on the graphene surface, high electrical conductivity and low charge transfer resistance. This powder catalyst has potential application in the PEM water electrolysis technique because of its low cost and high stability.