Stereoaligned Epitaxial Growth of Single‐Crystalline Platinum Nanowires by Chemical Vapor Transport

Epitaxial Pt nanowire (NW) arrays are synthesized for the first time by a chemical vapor transport method by using a metal halide as a precursor. Here we report that the epitaxial growth direction of NWs can be steered by seed crystal morphology. Octahedral seeds grow into inclined NWs possessing six growth directions, whereas half‐octahedral seeds grow into vertical and horizontal NWs. Interfacial energies between the seed material and the substrate are critical in determining the morphology of seed crystals. We also demonstrate that non‐SERS‐active Pt NWs can show strong surface‐enhanced Raman scattering (SERS) spectra by placing them on Ag films. The active SERS observation would help to elucidate platinum‐catalyzed chemical reactions.     

Synthesis of Discrete Alkyl‐Silica Hybrid Nanowires and Their Assembly into Nanostructured Superhydrophobic Membranes

We report the synthesis of highly flexible and mechanically robust hybrid silica nanowires (NWs) which can be used as novel building blocks to construct superhydrophobic functional materials with three‐dimensional macroporous networks. The hybrid silica NWs, with an average diameter of 80 nm and tunable length of up to 12 μm, are prepared by anisotropic deposition of the hydrolyzed tetraethylorthosilicate in water/n‐pentanol emulsions. A mechanistic investigation reveals that the trimethoxy(octadecyl)silane introduced to the water‐oil interface in the synthesis plays key roles in stabilizing the water droplets to sub‐100 nm and also growing a layer of octadecyl groups on the NW surface. This work opens a solution‐based route for the one‐pot preparation of monodisperse, hydrophobic silica NWs and represents an important step toward the bottom‐up construction of 3D superhydrophobic materials and macroporous membranes.     

Anisotropy property of CdS and PbS quantum dots encapsulated in silica film with uniformly oriented mesochannel

In this paper, hybrid film of mesoporous silica film with oriented mesochannels and semiconductor quantum dot has been prepared. Encapsulation of CdS and PbS within the oriented mesochannels leads to a regular arrangement at the macro scale. The hybrid film thus obtained showed remarkable anisotropic photoelectronic properties due to the confinement effect of the oriented mesochannels. Furthermore, due to the independence of the orientations of the mesochannels on the substrate, bilayer films containing both CdS and PbS could be prepared. This design has allowed an extension of the range of light absorption by the thin film as well as an amplification of the response to external photoelectronic effects. Such a hybrid film may prove useful in the design of anisotropic electrodes and electronic nanodevices.     

Real‐Time Probing of Nanowire Assembly Kinetics at the Air–Water Interface by In Situ Synchrotron X‐Ray Scattering

Although many assembly strategies have been used to successfully construct well‐aligned nanowire (NW) assemblies, the understanding of their assembly kinetics has remained elusive, which restricts the development of NW‐based device and circuit fabrication. Now a versatile strategy that combines interfacial assembly and synchrotron‐based grazing‐incidence small‐angle X‐ray scattering (GISAXS) is presented to track the assembly evolution of the NWs in real time. During the interface assembly process, the randomly dispersed NWs gradually aggregate to form small ordered NW‐blocks and finally are constructed into well‐defined NW monolayer driven by the conformation entropy. The NW assembly mechanism can be well revealed by the thermodynamic analysis and large‐scale molecular dynamics theoretical evaluation. These findings point to new opportunities for understanding NW assembly kinetics and manipulating NW assembled structures by bottom‐up strategy.     

Synthesis and properties of photoalignable aromatic polyesters containing phenylenediacrylate units in their backbones and n‐alkyl moieties in their side groups

A series of poly[oxy(4‐n‐alkyl‐3,5‐benzoate)oxy‐1,4‐phenylenediacryloyl]s (PPDA‐CnBZ polymers) with high molecular weights was synthesized. These polymers exhibit excellent solubility in some common organic solvents and produce good quality films using conventional spin‐casting and drying processes. The polymers are thermally stable up to 357–362 °C in a nitrogen atmosphere; their glass transition temperatures are greater than 121 °C. The photoreactions and photoalignments of the polymers were investigated using ultraviolet‐visible and infrared spectroscopy, and their liquid crystal (LC) alignment properties were examined. The phenylenediacrylate (PDA) chromophores in the polyesters were found to mainly undergo photocyclization upon ultraviolet light irradiation. Irradiation of the polyester films with linearly polarized ultraviolet light (LPUVL) induces preferential orientation of the polymer main chains, while the unreacted PDA chromophores are aligned along the direction perpendicular to the electric vector of the LPUVL. All the films irradiated with LPUVL were found to align LCs in a direction perpendicular to the electric vector of the LPUVL. Moreover, these LC alignments persisted even on irradiated films annealed at temperatures up to 210 °C, which is much higher than the glass transition temperatures of the polyesters. These LC alignment characteristics are due to the anisotropic interactions of the LC molecules with the oriented polymer chains and with the unreacted PDA chromophores. LC alignments on the polyester film surfaces have homeotropic to homogeneous characteristics, depending on the length of the n‐alkyl side group, providing strong evidence that the n‐alkyl side groups of the polyesters play a critical role in determining the pretilt angles of the LCs. The LC pretilt angles were also found to be influenced by the thermal annealing history of the irradiated films. In summary, the excellent properties of the PPDA‐CnBZ polymers make them promising candidate materials for use as LC alignment layers in advanced LC display devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1322–1334, 2004     

Formation of a Single‐Crystal Aluminum‐Based MOF Nanowire with Graphene Oxide Nanoscrolls as Structure‐Directing Agents

An innovative strategy is proposed to synthesize single‐crystal nanowires (NWs) of the Al³⁺ dicarboxylate MIL‐69(Al) MOF by using graphene oxide nanoscrolls as structure‐directing agents. MIL‐69(Al) NWs with an average diameter of 70±20 nm and lengths up to 2 μm were found to preferentially grow along the [001] crystallographic direction. Advanced characterization methods (electron diffraction, TEM, STEM‐HAADF, SEM, XPS) and molecular modeling revealed the mechanism of formation of MIL‐69(Al) NWs involving size‐confinement and templating effects. The formation of MIL‐69(Al) seeds and the self‐scroll of GO sheets followed by the anisotropic growth of MIL‐69(Al) crystals are mediated by specific GO sheets/MOF interactions. This study delivers an unprecedented approach to control the design of 1D MOF nanostructures and superstructures.     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.     

Crystal‐to‐Crystal Synthesis of Helically Ordered Polymers of Trehalose by Topochemical Polymerization

The synthesis of crystalline helical polymers of trehalose via topochemical azide–alkyne cycloaddition (TAAC) of a trehalose‐based monomer is presented. An unsymmetrical trehalose derivative having azide and alkyne crystallizes in two different forms having almost similar packing. Upon heating, both the crystals undergo TAAC reaction to form crystalline polymers. Powder X‐ray diffraction (PXRD) studies revealed that the monomers in both the crystals polymerize in a crystal‐to‐crystal fashion; circular dichroism (CD) studies of the product crystals revealed that the formed polymer is helically ordered. This solvent‐free, catalyst‐free polymerization method that eliminates the tedious purification of the polymeric product exemplifies the advantage of topochemical polymerization reaction over traditional solution‐phase polymerization.     

On the circular birefringence of polycrystalline polymers: polylactide

The circular birefringence of polycrystalline polymers is invariably obscured by strong linear birefringence. To parse the two mechanisms of light retardation, polycrystalline spherulites of polylactide enantiomers were analyzed by Mueller matrix microscopy. Polymer films are barely optically active in normal incidence, but if illuminated obliquely they become strongly optically active. Opposite hemispheres have oppositely signed circular birefringence. The sign is independent of the enantiomer but dependent on the sense of the sample's tilt. These observations are consistent with light path inhomogeneities resulting from stacked, mis-oriented lamellae. Chiroptical commonalities based on symmetry arguments are discussed among polylactide, a single oriented water molecule, and microfabricated metamaterial arrays, as well as the first physical model of optical activity, Reusch's pile of mica plates. The latter model provides the best explanation of the circular birefringence of polylactide spherulites. The only data on the optical rotation of crystalline polymers to date come from ostensible single crystals of polylactide. The enormous, anisotropic optical rotations observed previously are in quantitative agreement with misoriented lamellae observed here. Limitations of parsing circularly birefringent systems into those showing 'natural optical activity' and those others, somehow 'unnatural', are discussed.     

Synthesis,optical properties,and electroluminescence of conjugated poly(p‐phenylenevinylene) derivatives containing 1,3,4‐oxadiazole and pyridine rings in the main chain

Three new poly(p‐phenylenevinylene) derivatives—PO, POD, and POP—with oxadiazole and pyridine rings along the main chain were synthesized via Heck coupling. The polymers were amorphous and dissolved readily in common organic solvents. They showed relatively low glass‐transition temperatures (up to 42 °C) and satisfactory thermal stability. Solutions of the polymers emitted blue‐greenish light with photoluminescence (PL) emission maxima around 460 nm and PL quantum yields of 0.28–0.49. Thin films of the polymers displayed PL emission maxima at 461–521 nm, and their tendency to form aggregates was significantly influenced by the chemical structure. Light‐emitting diodes with polymers PO and POP, with an indium tin oxide/poly(ethylenedioxythiophene) (PEDOT)/polymer/Ca configuration, emitted yellow and green light, respectively, and this could be attributed to excimer emission. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3212–3223, 2004     

Organic‐Stabilizer‐Free Polyol Synthesis of Silver Nanowires for Electrode Applications

The polyol reduction of a Ag precursor in the presence of an organic stabilizer, such as poly(vinylpyrrolidone), is a widely used method for the production of Ag nanowires (NWs). However, organic capping molecules introduce insulating layers around each NW. Herein we demonstrate that Ag NWs can be produced in high yield without any organic stabilizers simply by introducing trace amounts of NaCl and Fe(NO₃)₃ during low‐temperature polyol synthesis. The heterogeneous nucleation and growth of Ag NWs on initially formed AgCl particles, combined with oxidative etching of unwanted Ag nanoparticles, resulted in the selective formation of long NWs with an average length of about 40 μm in the absence of a capping or stabilizing effect provided by surface‐adsorbing molecules. These organic‐stabilizer‐free Ag NWs were directly used for the fabrication of high‐performance transparent or stretchable electrodes without a complicated process for the removal of capping molecules from the NW surface.     

From Precursor Powders to CsPbX3 Perovskite Nanowires: One‐Pot Synthesis,Growth Mechanism,and Oriented Self‐Assembly

The colloidal synthesis and assembly of semiconductor nanowires continues to attract a great deal of interest. Herein, we describe the single‐step ligand‐mediated synthesis of single‐crystalline CsPbBr₃ perovskite nanowires (NWs) directly from the precursor powders. Studies of the reaction process and the morphological evolution revealed that the initially formed CsPbBr₃ nanocubes are transformed into NWs through an oriented‐attachment mechanism. The optical properties of the NWs can be tuned across the entire visible range by varying the halide (Cl, Br, and I) composition through subsequent halide ion exchange. Single‐particle studies showed that these NWs exhibit strongly polarized emission with a polarization anisotropy of 0.36. More importantly, the NWs can self‐assemble in a quasi‐oriented fashion at an air/liquid interface. This process should also be easily applicable to perovskite nanocrystals of different morphologies for their integration into nanoscale optoelectronic devices.     

Rapid Capillary‐Assisted Solution Printing of Perovskite Nanowire Arrays Enables Scalable Production of Photodetectors

Despite recent progress in producing perovskite nanowires (NWs) for optoelectronics, it remains challenging to solution‐print an array of NWs with precisely controlled position and orientation. Herein, we report a robust capillary‐assisted solution printing (CASP) strategy to rapidly access aligned and highly crystalline perovskite NW arrays. The key to the CASP approach lies in the integration of capillary‐directed assembly through periodic nanochannels and solution printing through the programmably moving substrate to rapidly guide the deposition of perovskite NWs. The growth kinetics of perovskite NWs was closely examined by in situ optical microscopy. Intriguingly, the as‐printed perovskite NWs array exhibit excellent optical and optoelectronic properties and can be conveniently implemented for the scalable fabrication of photodetectors.     

Morphology and Crystal Structure of Wholly Aromatic All-Para Polyamide-Hydrazide Polymers

The morphology of some amide-hydrazide polymers of the type useful for high-modulus X-500 class fibers has been characterized by transmission electron microscopy of thin films crystallized from dilute solution. Selected area electron diffraction was used to characterize the crystallinity and crystal structure of the thin films and precipitated polymer. The films were cast from concentrated solutions and crystallized by heating the films. The results of these studies revealed several unique features relative to the crystal structure of the all-para polymers. Thin films of the crystallized polymer showed a distinctive crystalline texture—the molecular chains were found to be preferentially oriented parallel to the film plane and randomly oriented about an axis normal to the film plane. Electron diffraction measurements showed equatorial reflection maxima at tilt angles of = 30, ±48, and =59 when the films were tilted on an axis parallel to the film plane. From these results a tentative crystal unit cell and theoretical crystal density were determined: a = 8.5 [Agrave], b = 4.9 Å, c (chain axis) = 29.6 Å, p (density) =1.51 g/cc. The value a/b = 1.735, which is very near 3¹/², implies essentially hexagonal packing of the chains. Crystallization from dilute solution revealed lamellar structures resembling “single crystals” in the electron microscope similar to those observed in other crystalline polymers. However, in contrast to these other polymers, these “crystals” are not likely to contain folded chains because of the very rigid nature of the all-para poiyamide-hydrazide.     

Click Chemistry Mediated Functionalization of Vertical Nanowires for Biological Applications

Semiconductor nanowires (NWs) are gaining significant importance in various biological applications, such as biosensing and drug delivery. Efficient and controlled immobilization of biomolecules on the NW surface is crucial for many of these applications. Here, we present for the first time the use of the Cu^I‐catalyzed alkyne–azide cycloaddition and its strain‐promoted variant for the covalent functionalization of vertical NWs with peptides and proteins. The potential of the approach was demonstrated in two complementary applications of measuring enzyme activity and protein binding, which is of general interest for biological studies. The attachment of a peptide substrate provided NW arrays for the detection of protease activity. In addition, green fluorescent protein was immobilized in a site‐specific manner and recognized by antibody binding to demonstrate the proof‐of‐concept for the use of covalently modified NWs for diagnostic purposes using minute amounts of material.     

Synthesis of hybrid solar cells using CdS nanowire array grown on conductive glass substrates

High-density CdS nanowire (NW) arrays were successfully grown on fluorine-doped tin oxide (FTO)-coated glass substrates by vapor–liquid–solid (VLS) mechanism at a remarkably reduced temperature of ～450 °C. Bi catalyst layer and polyvinyl alcohol (PVA) played a major role in the low-temperature synthesis of high-quality CdS NW arrays. CdS NWs were defect free single crystalline Wurtzite crystals and they were 50–100 nm and 2–5 μm in diameter and length, respectively. CdS NWs were combined with poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), a conjugated polymer to form organic–inorganic hybrid structures. The UV–visible light absorption and emission behavior of MEH-PPV/CdS hybrids was investigated and their potential to be used as photovoltaic cells was demonstrated.     

Enhancing Electron Collection Efficiency and Effective Diffusion Length in Dye‐Sensitized Solar Cells

Intensity‐modulated photocurrent spectroscopy and intensity‐modulated photovoltage spectroscopy are employed to measure the dynamics of electron transport and recombination in the ZnO nanowire (NW) array‐ZnO/layered basic zinc acetate (LBZA) nanoparticle (NP) composite dye‐sensitized solar cells (DSSCs). The roles of the vertical ZnO NWs and insulating LBZA in the electron collection and transport in DSSCs are investigated by comparing the results to those in the TiO₂–NP, horizontal TiO₂–NW and vertical ZnO–NW‐array DSSCs. The electron transport rate and electron lifetime in the ZnO NW/NP composite DSSC are superior to those in the conventional TiO₂–NP cell due to the existence of the vertical ZnO NWs and insulating LBZA. It indicates that the ZnO NW/NP composite anode is able to sustain efficient electron collection over much greater thickness than the TiO₂–NP cell does. Consequently, a larger effective electron diffusion length is available in the ZnO composite DSSC.     

Synthesis and properties of nitrogen‐linked poly(2,7‐carbazole)s as hole‐transport material for organic light emitting diodes

A novel class of carbazole polymers, nitrogen‐linked poly(2,7‐carbazole)s, was synthesized by polycondensation between two bifunctional monomers using the palladium‐catalyzed amination reaction. The polymers were characterized by ¹H NMR, Infrared, Gel permeation chromatography, and MALDI‐TOF MS and it was revealed that the combination of the monomer structures is important for producing high molecular weight polymers. Thermal analysis indicated a good thermal stability with high glass transition temperatures, e.g., 138 °C for the higher molecular weight polymer P2 . To pursue the application possibilities of these polymers, their optical properties and energy levels were investigated by UV‐Vis absorption and fluorescence spectra as well as their electrochemical characteristics. Although the blue light emission was indeed observed for all polymers in solution, the quantum yields were very low and the solid films were not fluorescent. On the other hand, the HOMO levels of the polymers estimated from the onset potentials for the first oxidation in the solid thin films were relatively high in the range of ?5.12 to ?5.20 eV. Therefore, light emitting diodes employing these polymers as a hole‐transport layer and iridium(III) complex as a triplet emitter were fabricated. The device of the nitrogen‐linked poly(2,7‐carbazole) P3 with p,p′‐biphenyl spacer, which has a higher HOMO level and a higher molecular weight, showed a much better performance than the device of P2 with m‐phenylene spacer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3880–3891, 2009     

Facile Fabrication of Multi‐targeted and Stable Biochemical SERS Sensors

The direct transfer of single‐crystalline Au nanowires (NWs) onto Au substrates was achieved by a simple attachment and detachment process. In the presence of a lubricant, Au NWs grown vertically on a sapphire substrate were efficiently moved to an Au substrate through van der Waals interactions. We demonstrate that the transferred Au NWs on the Au substrate can act as sensitive, reproducible, and long‐term‐stable surface‐enhanced Raman scattering (SERS) sensors by detecting human α‐thrombin as well as Pb²⁺ and Hg²⁺ ions. These three biochemically and/or environmentally important analytes were successfully detected with high sensitivity and selectivity by Au NW‐SERS sensors bound by a thrombin‐binding aptamer. Furthermore, the as‐prepared sensors remained in working order after being stored under ambient conditions at room temperature for 80 days. Because Au NWs can be routinely transferred onto Au substrates and because the resultant Au NW‐SERS sensors are highly stable and provide with high sensitivity and reproducibility of detection, these sensors hold potential for practical use in biochemical sensing.     

New series of highly phenyl‐substituted polyfluorene derivatives for polymer light‐emitting diodes

A new series of highly phenyl‐substituted polyfluorene derivatives were synthesized and characterized. The resulting polymers were amorphous and showed excellent solubility in common organic solvents, such as chloroform, tetrahydrofuran, xylene, toluene, chlorobenzene, and so forth. All possessed satisfied thermal stability with glass‐transition temperatures (T_g's) in the range of 79–115 °C. They emitted blue light with photoluminescent (PL) maximum peaks at about 408–412 nm in thin films. The PL efficiencies of the polymer films were measured around 30–33%. The highly phenylated pendants improved the T_g of polyfluorene without forming defects in the polymers and reduced their tendency to form aggregate/excimers. Polymer light‐emitting diodes were fabricated from these polymers with the configuration of indium tin oxide/polyethylenedioxythiophene:polystyrene sulfonic acid/polymer/Ba/Al, which emitted bright blue light with maximum peaks at 418–420 nm. The maximum external quantum efficiencies of these devices were 0.41–0.6%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2985–2993, 2004