Control of Multicolor and White Emission by Adjusting the Equilibrium between Fluorophores,Lewis Acids,and Their Complexes in Polymers

Multicolor emissive materials consisting of a single luminophore, a Lewis acid, and their complex were developed. The emission colors can be tuned by changing the concentration of the solution and the ratio of mixed solvents. Various emission colors in the solid state were observed when the complexes were added to polymers in different amounts. The color change is due to equilibrium disruption between the single luminophore, the Lewis acid, and the complex thereof. White emission was observed by appropriately controlling the equilibrium by changing the amount of the complex in the polymer.     

Functionalized polynorbornenes with fragments of cholic acid and luminophore complexes of iridium(III) and copper(I) in side chains. Synthesis and photophysical properties

Copolymers containing fragments of cholic acid and luminophore complexes of iridium(III) and copper(I) in the side chains have been synthesized by metathesis polymerization. Photophysical properties of the obtained compounds have been investigated. Iridium-containing copolymers demonstrate intense photoluminescence of green, bluish-green and red colors. Copper-containing copolymers generate radiation of green and yellow-green colors. The color of photoluminescence of the metal-containing polymers is determined by the nature of copper(I) and iridium(III) complexes bonded to polymer chain.     

Synthesis,characterization, and evaluation of [Ir(ppy)2(vpy)Cl] as a polymer-bound oxygen sensor

This study reports new luminescent oxygen sensors in which the luminophore is covalently bound to the polymer matrix and compares their behavior to related sensors in which the luminophore is dispersed within the matrix. The cyclometalated iridium complex [Ir(ppy)(2)(vpy)Cl], 1, has been synthesized and characterized spectroscopically (absorption and emission) and by 1-D and 2-D (1)H NMR, elemental analysis, and X-ray crystallography. Complex 1 was attached via hydrosilation to hydride-terminated poly(dimethylsiloxane) (PDMS), yielding material 2. Successful luminophore attachment was determined spectroscopically from the emission properties, and through the altered physical behavior of 2 compared to a dispersion of 1 in PDMS. Hydrosilation of 1 with dimethylphenylsilane yielded [Ir(ppy)(2)(DMPSEpy)Cl], 3, which was fully characterized and used to probe the effect of hydrosilation on the spectroscopic properties of the luminophore. Evaluation of 2 as a luminescent oxygen sensor revealed significantly improved sensitivity over dispersions of 1 in PDMS. Material 2 was also blended with polystyrene (PS) to improve the physical properties of the sensor films. The blend sensors exhibited increased sensitivity relative to films of 2 alone and maintained short response times to rapid changes in air pressure. In contrast, 1 partitioned into the PS phase when dispersed in a PDMS/PS blend, resulting in longer sensor response times.     

Solvatochromic response imposed by environmental changes in matrix/chromophore entities: luminescent cyclometalated platinum (II) complex in Nafion and silica materials

Luminescent cyclometalated complex [Pt(L)py]+ (1) immobilised in Nafion film exhibits a solvatochromic shift in emission maximum from 530 to 650 nm upon immersion in ethanol but no effect is detected with aprotic organic solvents, whereas the emission of the [Pt(L)]+ luminophore anchored in silica materials shows a blue shift from approximately 665 to 550 nm upon exposure to pentane vapour but no shift is observed for ethanol vapour.     

Infrared spectra of the complexes of trifluoroethene with dimethyl ether, acetone, and oxirane: a cryosolution study

Infrared spectra of solutions of trifluoroethene and dimethyl ether, acetone, or oxirane in liquid krypton and liquid argon have been studied. For each Lewis base the formation of a 1:1 complex with the Lewis acid was observed. The C-H stretching of trifluoroethene being perturbed by a strong Fermi resonance, the complexes with trifuloroethene-d were also investigated and showed that in each case the hydrogen bond between the acid and base is of the traditional, red-shifting type. The structures of the complexes were investigated using ab initio calculations. These indicate that with dimethyl ether and acetone two different isomeres can be formed, but with a single one detected in the solution in each case. The Fermi resonance in the complex with unlabeled trifluoroethene is discussed using data derived form ab initio potential and dipole hypersurface calculations. The complexation enthalpies of the complexes were obtained from temperature dependent studies of the solutions and are discussed in relation to the ab initio complexation energies and Monte Carlo free energy perturbation calculations of solvent effects.     

Gas-filled radioluminescent light sources and prospects for their further development

Luminescence of various inorganic compounds of rare earth elements as radioluminophores was studied with the aim of fabricating weak permanent light sources. Under the action of UV and tritium radiation, all the luminophores tested emit light of different colors. In the tritium gas medium, six luminophores showed emission, and for three of them (Y₂O₃:Eu, Y₂O₃:Eu, Bi, Gd₂O₃:Eu) the emission brightness was acceptable for practical use. Attempt to prepare permanent light sources with new types of luminophores using a phosphoric acid solution as a binder demonstrated the need for searching for a new binder firmly fixing the luminophore on the glass surface.     

Study of the surface chemistry and morphology of single walled carbon nanotube-magnetite composites

The study of the morphologies of the single walled carbon nanotube (SWCNT), magnetite nanoparticles (MNP), and the composite based on them was carried with combined X-ray diffraction (XRD), Raman spectroscopy (RS), scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). These techniques together with thermogravimetric analyses (TGA) and diffuse reflectance infrared transform spectroscopy (DRIFTS) confirmed the production of pure single phases, and that the composite material consisted of MNP attached to the outer surface of the SWCNT. The Mössbauer spectroscopy (MS) research showed the presence of a large quantity of Lewis acid sites in the highly dispersed magnetite particles supported on the SWCNT outer surface. The DRIFTS carbon dioxide adsorption study of the composites revealed significant adsorption of carbon dioxide, fundamentally in the Lewis acid sites. Then, the Lewis acid sites were observed to be catalytically active. Further, the electron exchange between the Lewis acid sites and the basic or amphoteric adsorbed molecules could influence the magnetic properties of the magnetite. Consequently, together with this first ever use of MS in the study of Lewis acid sites, this investigation revealed the potential of the composites for catalytic and sensors applications.     

Diferrocenophosphaborin: A Planar‐Chiral,Redox‐Active and Anion‐Responsive Ambiphilic Ligand

A new class of Janus‐like ambiphilic ligands is introduced. The rigid diferrocene backbone in heterocycles 4‐SnP and 4‐BP creates an unprecedented chiral environment as demonstrated by multinuclear NMR and single‐crystal X‐ray studies. In addition, the ligands are redox‐responsive and the Lewis acidic borane moiety in 4‐BP can be exploited to further tune the properties: a clear decrease in the CO stretching frequency of a Vaska‐type Rh^I complex 5‐BP is observed upon addition of fluoride ions. Thus, the Lewis acid and Lewis base sites influence each other and their strength can be modulated by redox chemistry and anion binding.     

Diferrocenophosphaborin: A Planar‐Chiral,Redox‐Active and Anion‐Responsive Ambiphilic Ligand

A new class of Janus‐like ambiphilic ligands is introduced. The rigid diferrocene backbone in heterocycles 4‐SnP and 4‐BP creates an unprecedented chiral environment as demonstrated by multinuclear NMR and single‐crystal X‐ray studies. In addition, the ligands are redox‐responsive and the Lewis acidic borane moiety in 4‐BP can be exploited to further tune the properties: a clear decrease in the CO stretching frequency of a Vaska‐type Rh^I complex 5‐BP is observed upon addition of fluoride ions. Thus, the Lewis acid and Lewis base sites influence each other and their strength can be modulated by redox chemistry and anion binding.     

B(C6F5)3: A Lewis Acid that Brings the Light to the Solid State

The straightforward coordination of the Lewis acid B(C₆F₅)₃ to classical, non‐emitting aldehydes results in solid‐state photoluminescence. Variation of the electronic properties of the carbonyl moieties lead to the modulation of the solid‐state emission colors, covering the entire visible spectrum with quantum yields up to 0.64. Steady‐state spectroscopy in combination with X‐ray diffraction analysis and DFT calculations confirm that intermolecular interactions between the Lewis adducts are responsible for the observed luminescence. Alteration of the latter interactions induces, moreover, remarkable solid‐state phenomena such as piezochromism. The versatility and simplicity of our approach facilitate the future development of solid‐state emitting materials.     

气液色谱法测定双(1,3)-二苯基丙二酮合铜(Ⅱ)配合物和杂茂环加合反应的热力学性质

气液色谱法是研究作为Lewis酸A的过渡金属配合物与作为Lewis碱的有机化合物B相互作用的热力学参数的有效方法,但以往工作大都采用非极性的直链角鲨烷作固定液。为将此法扩展到包含苯基配体的过渡金属配合物体系,我们采用一种新的固定液——多苄基联苯,测定了双(1,3)-二苯基丙二酮合铜(Ⅱ)与呋喃、噻吩的加合反应的热力学参数。     

The first catalytic highly enantioselective alkylation of ketimines--a novel approach to optically active quaternary alpha-amino acids

A series of novel ketimines with intrinsic protecting group anchoring was synthesized and allowed to react with various silylketene acetals in the presence of 5-10 mol % of a chiral Zn(OTf)(2)-(R,R)-Ph-pybox-aqua complex. The corresponding optically active quaternary alpha-amino acid derivatives were obtained in high yields and with enantioselectivities ranging from 34 % up to 95 % ee. The catalyst was studied by (1)H NMR spectroscopy and X-ray crystallography, and a dynamic equilibrium of two species was identified in solution. These are a homo-chiral 1:2 metal-ligand complex and a 1:1 metal-ligand complex, of which the latter is expected to be the actual catalyst of the diastereo- and enantioselective reaction. A strong positive nonlinear effect was observed due to the formation of a catalytically inactive 1:2 metal-ligand hetero-chiral complex. On the basis of DFT calculations and the absolute stereochemistry of the products, simultaneous coordination of the imino electrophile and a single molecule of H(2)O to the chiral Lewis acid complex is proposed. Coordination of the imine-nitrogen atom in the axial position of an octahedral complex can account for the facial selectivity as well as the diastereoselectivity observed.     

Dual fluorescence of N-phenylanthranilic acid: Effect of solvents, pH and beta-cyclodextrin

Spectral characteristics of N-phenylanthranilic acid (NPAA) have been studied in different solvents, pH and beta-cyclodextrin (beta-CD) and compared with anthranilic acid (2-aminobenzoic acid, 2ABA). In all solvents a dual fluorescence is observed in NPAA, whereas 2ABA gives single emission. Combining the results observed in the absorption, fluorescence emission and fluorescence excitation spectra, it is found that strong intramolecular hydrogen bonding (IHB) interactions present in NPAA molecule. The inclusion complex of NPAA with beta-CD is analysed by UV-vis, fluorimetry, FT-IR, (1)H NMR, scanning electron microscope and AM 1 method. The above spectral studies show that NPAA forms a 1:1 inclusion complex with beta-CD and COOH group present in the beta-CD cavity. A mechanism is proposed to explain the inclusion process.     

Lewis acid-promoted rearrangement of 2,3-epoxy alcohol derivatives: stereochemical control and selective formation of two types of chiral quaternary carbon centers from the single carbon skeleton

The Lewis acid-promoted rearrangement of 2,2,3,3-tetrasubstituted 2,3-epoxy alcohols with several kinds of protecting groups was investigated. When SnCl4 is used as a Lewis acid, the reaction proceeds in a regio- and stereo-controlled manner to afford two types of carbonyl compounds selectively from a single 2,3-epoxy alcohol only by changing the protecting group of the alcohol. The method was then applied to the formation of two types of acyclic and cyclic quaternary carbon centers from the single compound in optically active forms.     

A new ligand and its complex with multi-stimuli-responsive and aggregation-induced emission effects

A new ligand containing tetraphenylethylene and terpyridine moieties, and its zinc ion complex were synthesized. Both of them exhibit an aggregation-induced emission effect. Their colors and emissions can be smartly switched by various external stimuli including grinding, heating and solvent-fuming, as well as exposure to acid and base vapors.     

Synthesis, characterization, and fluorescence behavior of twisted and planar B2N2-quaterphenyl analogues

A series of planar and twisted heteroaromatic quaterphenyl analogues containing BN ring linkages has been synthesized using primarily difunctional Lewis acidic diborabiphenyl moieties as molecular cores. Crystal structure analyses indicated the presence of large twist angles between adjacent aromatic rings in 1 and 3, which were also observed to possess nonfluorescent behavior due to a lack of molecular rigidity and insufficient B=N character in the excited state. In contrast, the incorporation of one or two bridging ethylene groups between the adjacent rings (installed via an ethynyl cycloisomerization) was found to afford planar phenanthrene or pyrene moieties, which resulted in weak fluorescence behavior (Phi F = 0.02-0.16) for the n-Bu and Ph derivatives 5-12. Emission colors ranged from green (lambda em = 521 nm) to red (lambda em = 630 nm) and depended primarily on the conformation (2,2'- vs 4,4'-), the extent of chromophore conjugation (phenanthrene vs pyrene), and the type of exocyclic substituent present (n-Bu vs Ph). Communication between the two phenanthrene or pyrene moieties was observed in some cases, which was characterized by bathochromically shifted emission bands relative to that of monomeric phenanthrene or pyrene species. Unique excited-state dimer (excimer) fluorescence was observed for the 2,2'-isomer 8, which was characterized by broad, low-energy emission bands bathochromically shifted from that of the corresponding monomer.     

Synthesis, resolution, and aldol reactions of a planar-chiral Lewis acid complex

The synthesis and resolution of a new planar-chiral Lewis acid complex is described. The compound is applied to asymmetric Mukaiyama aldol reactions, leading to the formation of the desired product with good stereoselectivity. The sense of stereoselection is as predicted by the design, which exploits the ability of the Lewis acid to simultaneously serve as a sigma and a pi acceptor. Mechanistic observations are consistent with rate-determining formation of an aldehyde-Lewis acid complex, followed by rapid nucleophilic addition.     

2,3-Diarylbenzo[b]arsole: Structural Modification and Polymerization for Tuning of Photophysical Properties

2,3-Diarylbenzo[b]arsoles were synthesized from zirconacycles and diiodophenylarsine. The structural modification to the luminophore was attained through diarylacetylene precursors, Suzuki–Miyaura coupling, and oxidation of the arsenic atom. The emission properties were controlled according to these modifications. The 2,3-diarylbenzo[b]arsoles showed aggregation-induced emission enhancement; the stronger emission was observed in the solid states than in solutions. In addition, Suzuki–Miyaura polycondensation and olefin metathesis polymerization produced main- and side-chain polymers, respectively. The resultant polymers showed different emission behaviors such as aggregation caused quenching and aggregation induced emission enhancement.     

Macroscopic Change in Luminescent Color by Thermally Driven Sliding Motion in [3]Rotaxanes

Systematic investigation of rotaxane structures has revealed a rational design for thermally driven switching of their macroscopic properties. At low temperature, the luminophore is insulated by the macrocycles and displays monomer emission, whereas at high temperature, the luminophore is exposed owing to a change in the macrocyclic location distribution and interacts with external molecules, affording a thermally driven luminescent color change with high reversibility and responsiveness. This macroscopic switching through efficient thermal sliding was made possible by appropriate tuning of both the macrocycle–luminophore interactions within the rotaxane and the coupling between the excited luminophore and external molecules in an exciplex. The ability to switch properties by a simple and clean thermal stimuli should expand the utilization of rotaxanes as components of thermally driven molecular systems.     

New metal-only Lewis pairs: elucidating the electronic influence of N-heterocyclic carbenes and phosphines on the dative Pt-Al bond

The synthesis and full characterization of a new heteroleptic N-heterocyclic carbene (NHC)-phosphine platinum(0) complex and formation of its corresponding alane adduct is reported. The influence of the ligands on the Lewis basic properties was studied via multinuclear NMR-spectroscopy, X-ray analyses, and density functional theory (DFT) calculations. Consistently, the effect of changing the halogens upon the Lewis acid properties of aluminum halides was studied by X-ray analysis and DFT calculations.