σ‐Noninnocence: Masked Phenyl‐Cation Transfer at Formal NiIV

Reductive elimination is an elementary organometallic reaction step involving a formal oxidation state change of ?2 at a transition‐metal center. For a series of formal high‐valent Ni^IV complexes, aryl–CF₃ bond‐forming reductive elimination was reported to occur readily (Bour et al. J. Am. Chem. Soc. 2015 , 137, 8034–8037). We report a computational analysis of this reaction and find that, unexpectedly, the formal Ni^IV centers are better described as approaching a +II oxidation state, originating from highly covalent metal–ligand bonds, a phenomenon attributable to σ‐noninnocence. A direct consequence is that the elimination of aryl–CF₃ products occurs in an essentially redox‐neutral fashion, as opposed to a reductive elimination. This is supported by an electron flow analysis which shows that an anionic CF₃ group is transferred to an electrophilic aryl group. The uncovered role of σ‐noninnocence in metal–ligand bonding, and of an essentially redox‐neutral elimination as an elementary organometallic reaction step, may constitute concepts of broad relevance to organometallic chemistry.     

NO migration from N‐methyl‐N‐nitrosobenzene‐sulfonamide to 3,6‐dibromocarbazole: Concerted or stepwise reaction path?

The NO migration from N‐methyl‐N‐nitrosobenzene‐sulfonamide to 3,6‐dibromocarbazole was proposed in a recent literature to follow a stepwise reaction path. However, the present density functional theory calculations at the MP2/6–31G(d,p)//B3LYP/6–31G(d,p) level show that this reaction exclusively proceeds via a concerted mechanism involving a four‐membered ring transition state. The calculated barrier is in good agreement with the experimental finding. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

固相β-环糊精包结物诱导7-羟基-2-甲氧基-2-甲基色满的不对称合成

研究了室温下间苯二酚和甲基乙烯基酮分别与β-环糊精（ β-CD）形成包结物后的几种不同固相反应,结果表明包结物A（间苯二酚/β-CD）与包结物B（甲基乙烯基酮/β-CD）反应能够很好地得到目的产物,产率及ee值分别为82.8%和78.4%;间苯二酚与包结物B反应仅得到低光学活性产物（ee值为19.5%）;包结物A与甲基乙烯基酮反应却没有得到手性目的产物。以熔点、X-粉末衍射、固相核磁碳谱及ROESY多种方法对所形成的包结物进行了表征,包结物中主客体的比例（1：1）通过¹H NMR (400 MHz)得以确定,文章对固相环加成反应的机制也进行了初步探讨。     

Theoretical Study on Gas—phase Pyrolytic Reactions of N—Ethyl,Isopropyl and N—t—Butyl Substituted 2—Aminopyrazine

Density functional theory (DFT) and ab initio methods were used to study gas‐phase pyrolytic reaction mechanisms of iV‐ethyl, N‐isopropyl and N‐t‐butyl substituted 2‐aminopyrazine at B3LYP/6–31G* and MP2/6–31G*, respectively. Single‐point energies of all optimized molecular geometries were calculated at B3LYP/6–311 + G(2d,p) level. Results show that the pyrolytic reactions were carried out through a unimolecular first‐order mechanism which were caused by the migration of atom H(17) via a six‐member ring transition state. The activation energies which were verified by vibrational analysis and correlated with zero‐point energies along the reaction channel at B3LYP/6–311 + G(2d,p) level were 252.02 kJ. mo^?1 (N‐ethyl substituted), 235.92 kJ‐mol^?1 (N‐t‐isopropyl substituted) and 234.27 kJ‐mol^?1 (N‐t‐butyl substituted), respectively. The results were in good agreement with available experimental data.     

Bismuth triflate–L(−)‐proline catalyzed synthesis of chiral 2,5‐diaryl‐2,3‐dihydropyrano[2,3‐b]quinolin‐4‐ones

The synthesis of chiral (2R) 2,5‐diaryl‐2,3‐dihydropyrano[2,3‐b]quinolin‐4‐ones, was achieved, at ambient temperature, by the reaction of 3‐acetyl‐4‐aryl‐carbostyril and an aldehyde, in the presence of bismuth triflate–L(?)‐proline complex, formed in situ. The products were obtained in 62–78% yield with high enantioselectivity (72–96% ee). J. Heterocyclic Chem., (2011).     

溴化镁催化的1,2,3,4-四氢吡啶酮无溶剂合成研究

An efficient and environmentally friendly procedure for the one-pot synthesis of tetrahydropyrimidinones from aldehydes, β-diketones and urea/thiourea by using magnesium bromide as an inexpensive and easily available catalyst under solvent-free conditions was described. Compared with the classical Biginelli reaction conditions, this new method has the advantage of good to excellent yields (74%-94%) and short reaction time (45-90 min). The structure of the Biginelli reaction product from β-diketone, salicylaldehyde and urea has been proposed to possess an oxygen-bridge by cyclization (intramolecular Michael-addition).     

N,N′‐Dioxide/Nickel(II)‐Catalyzed Asymmetric Inverse‐Electron‐Demand Hetero‐Diels–Alder Reaction of β,γ‐Unsaturated α‐Ketoesters with Enecarbamates

N,N′‐Dioxide/nickel(II) complexes have been developed to catalyze the inverse‐electron‐demand hetero‐Diels–Alder reaction of β,γ‐unsaturated α‐ketoesters with acyclic enecarbamates. After detailed screening of the reaction parameters, mild optimized reaction conditions were established, affording 3,4‐dihydro‐2H‐pyranamines in up to 99 % yield, 99 % ee and more than 95:5 d.r. The catalytic system was also efficient for β‐substituted acyclic enecarbamates, affording more challenging 2,3,4‐trisubstituted 3,4‐dihydro‐2H‐pyranamine with three contiguous stereogenic centers in excellent yields, diastereoselectivities, and enantioselectivities. The reaction could be scaled up to a gram scale with no deterioration of either enantioselectivity or yield. Based on these experiments and on previous reports, a possible transition state was proposed.     

Synthesis and radical polymerization behavior of bifunctional vinyl monomer derived from N‐vinylacetamide and p‐chloromethylstyrene

The radical polymerization of N‐(p‐vinylbenzyl)‐N‐vinylacetamide ( 1 ) prepared by the reaction of N‐vinylacetamide with p‐chloromethylstyrene was carried out by using radical initiators such as AIBN or BPO in benzene, chlorobenzene, or bulk. As a result, poly 1 was successfully isolated by dialysis (yield, 10–36%). The crosslinking reaction of poly 1 was carried out at 60–100 °C for 8 h. By using a radical initiator such as AIBN or BPO (3 mol %), the crosslinking reaction proceeded (yield, 63–79%). Moreover, the crosslinking reaction of poly 1 proceeded at 100 °C without a radical initiator in 50% yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2714–2723, 2006     

Strong Ground‐ and Excited‐State Charge Transfer in C3‐Symmetric Truxene‐Derived Phenothiazine‐Tetracyanobutadine and Expanded Conjugates

The C₃‐symmetric star‐shaped phenothiazene‐substituted truxene 1 was reacted with the electron acceptors tetracyanoethylene (TCNE) and 7,7,8,8‐tetracyanoquinodimethane (TCNQ). The cycloaddition–retroelectrocyclization reaction yields the conjugates 2 and 3 . A combination of spectral, electrochemical, and photophysical investigations of 2 and 3 reveals that the functionalization of the triple bond has a pronounced effect on their ground and excited‐state interactions. Specifically, the existence of strong ground‐state interactions between phenothiazine and the electron‐accepting groups results in charge‐transfer states, while subsequent ultrafast charge separation yields electron transfer products. This is unprecedented not only in phenothiazine chemistry but also in tetracyanobutadiene‐ and dicyanoquinodimethane‐derived donor–acceptor conjugates. Additionally, by manipulating spectroelectrochemical data, a spectrum of the charge‐separated species is construed for the first time, and shown to be highly useful in interpreting the rather complex transient spectra.     

Catalytic Asymmetric Synthesis of 3‐(α‐Hydroxy‐β‐carbonyl) Oxindoles by a ScIII‐Catalyzed Direct Aldol‐Type Reaction

A direct catalytic asymmetric aldol‐type reaction of 3‐substituted‐2‐oxindoles with glyoxal derivatives and ethyl trifluoropyruvate, catalyzed by a chiral N,N′‐dioxide–Sc(OTf)₃ (Tf=trifluoromethanesulfonyl) complex, has been developed that tolerates a wide range of substrates. The reaction proceeds in good yields and excellent enantioselectivities (up to 93 % yield, 99:1 diastereomeric ratio (dr), and >99 % enantiomeric excess (ee)) under mild conditions, to deliver 3‐(α‐hydroxy‐β‐carbonyl) oxindoles with vicinal quaternary–tertiary or quaternary–quaternary stereocenters. Even with 1 mol % catalyst loading or on scaleup (10 mmol of starting material), maintenance of ee was observed, which showed the potential value of the catalyst system. In studies probing the reaction mechanism, a positive nonlinear effect was observed and Sc^III‐based enolate intermediates were detected by using ESIMS. On the basis of the experimental results and previous reports, a possible catalytic cycle was assumed.     

Experimental and Computational Study of the Thermal Decomposition of 3‐Methyl‐3‐buten‐1‐ol in m‐Xylene Solution

An experimental study of the thermal decomposition of a β‐hydroxy alkene, 3‐methyl‐3‐buten‐1‐ol, in m‐xylene solution, has been carried out at five different temperatures in the range of 513.15–563.15 K. The temperature dependence of the rate constants for the decomposition of this compound in the corresponding Arrhenius equation is given by ln k (s^?1) = (25.65 ± 1.52) ? (17,944 ± 814) (kJ·mol^?1)·T^?1. A computational study has been carried out at the M05–2X/6–31+G(d,p) level of theory to calculate the rate constants and the activation parameters by the classical transition state theory. There is a good agreement between the experimental and calculated rate constants and activation Gibbs energies. The bonding characteristics of reactant, transition state, and products have been investigated by the natural bond orbital analysis, which provides the natural atomic charges and the Wiberg bond indices. Based on the results obtained, the mechanism proposed is a one‐step process proceeding through a six‐membered cyclic transition state, being a concerted and slightly asynchronous process. The results have been compared with those obtained previously by us (Struct Chem 2013, 24, 1811–1816) for the thermal decomposition of 3‐buten‐1‐ol, in m‐xylene solution. We can conclude that in the compound studied in this work, 3‐methyl‐3‐buten‐1‐ol, the effect of substitution at position 3 by a weakly activating CH₃ group is the stabilization of the transition state formed in the reaction and therefore a small increase in the rate of thermal decomposition.     

Microwave‐Assisted Three‐Component Synthesis of Some Novel 1‐Alkyl‐1H‐indole‐2,3‐dione 3‐(O‐Alkyl­oxime) Derivatives as Potential Chemotherapeutic Agents

A convenient and efficient method for a one‐pot conversion of N‐alkylisatins to N‐alkylisatin O‐alkyloximes 7a – 7n as potential chemotherapeutic agents is described (Scheme) (isatin=1H‐indole‐2,3‐dione). In this method, the microwave‐assisted three‐component reaction of N‐alkylisatins 8 , hydroxylamine hydrochloride, and diverse alkyl halides in the presence of K₂CO₃ and Bu₄NBr furnishes the corresponding N‐alkylisatin O‐alkyloximes under solvent‐free condition in short times (2–10 min) and good to excellent yields (62–83%). The O‐alkylation of in situ generated isatin oximes with alkyl halides was achieved regioselectively, and (Z)‐O‐alkyloximes were produced dominantly. PM3 Semi‐empirical quantum‐mechanic calculations were performed to rationalize the evidences, and the calculations indicated a lower heat of formation for the (Z)‐O‐alkyloximes.     

gem‐Dihalocyclopropanes as Building Blocks in Natural‐Product Synthesis: Enantioselective Total Syntheses of ent‐Erythramine and 3‐epi‐Erythramine

ent‐Erythramine ((?)‐ 1 ), the enantiomer of the alkaloid erythramine, was prepared in 15 steps from known compounds. The first of three pivotal bond‐forming steps in the synthesis was a Suzuki–Miyaura cross‐coupling reaction of the starting materials to give a bis‐silyl ether. The second involved silver(I)‐induced electrocyclic ring opening of the gem‐dichlorocyclopropane formed in the next step and trapping of the ensuing π‐allyl cation by the tethered nitrogen atom to give, following cleavage of the allyloxycarbonyl protecting group, an approximately 5:6 mixture of the chromatographically separable diastereoisomeric spirocyclic products. In the third critical bond‐forming reaction, the iodide formed from one of the diastereoisomers underwent a radical‐addition/elimination reaction sequence that led to (?)‐ 1 in 89 % yield. The application of the same sequence of transformations to the other diastereoisomer afforded 3‐epi‐(+)‐erythramine (3‐epi‐(+)‐ 1 ).     

Organocatalytic Asymmetric Friedel–Crafts Reaction of Sesamol with Isatins: Access to Biologically Relevant 3‐Aryl‐3‐hydroxy‐2‐oxindoles

The Friedel–Crafts reaction of electron‐rich phenols with isatins was developed by employing bifunctional thiourea–tertiary amine organocatalysts. Cinchona alkaloid derived thiourea epiCDT‐ 3 a efficiently catalyzed the Friedel–Crafts‐type addition of phenols to isatin derivatives to provide 3‐aryl‐3‐hydroxy‐2‐oxindoles 7 and 9 in good yield (80–95 %) with good enantiomeric excess (83–94 %). Friedel–Crafts adduct 7 t was subjected to a copper(I)‐catalyzed azide–alkyne cycloaddition to obtain biologically important 3‐aryl‐3‐hydroxy‐2‐oxindole 11 in good enantiomeric excess and having a 1,2,3‐triazole moiety.     

Asymmetric Henry reactions of aldehydes with various nitroalkanes catalyzed by copper(II) complexes of novel chiral N‐monoalkyl cyclohexane‐1,2‐diamines

A number of novel chiral diamines 3 , (1R,2R)‐N‐monoalkylcyclohexane‐1,2‐diamines, were designed and synthesized from trans‐cyclohexane‐1,2‐diamine and applied to the catalytic asymmetric Henry reaction of benzaldehyde and nitromethane to provide β‐nitroalcohol in high yield (up to 99%) and good enantiomeric excess (up to 89%). By using ligand (1R,2R)‐N¹‐(4‐methylpentan‐2‐yl)cyclohexane‐1,2‐diamine ( 3g ), the reaction was optimized in terms of the metal ion, temperature, solvent and base. Further experiments indicated that the complex, 3g –Cu(OAc)₂, was an efficient catalyst in the asymmetric Henry reaction between different aldehydes and nitromethane, and the desired products have been obtained with high chemical yields (up to 99%) and high enantiomeric excess (up to 93%). The optimized catalyst promoted the diastereoselective Henry reaction of various aldehyde substrates and nitroalkane, which gave the corresponding anti‐selective adduct with up to 99% yield and 83:17 anti/syn selectivity. Upon scaling up to gram quantities, the β‐nitroalcohol was obtained in good yield (96%) with excellent selectivities (93% ee). The chiral induction mechanism was tentatively explained on the basis of a previously proposed transition‐state model. Copyright © 2014 John Wiley & Sons, Ltd.     

Model Construction for the A–B–C Ring System of Lysergic Acid via Vilsmeier–Haack‐Type Cyclization of 1H‐Indole‐4‐propanoic Acid Derivatives

Vilsmeier–Haack‐type cyclization of 1H‐indole‐4‐propanoic acid derivatives was examined as model construction for the A–B–C ring system of lysergic acid ( 1 ). Smooth cyclization from the 4 position of 1H‐indole to the 3 position was achieved by Vilsmeier–Haack reaction in the presence of K₂CO₃ in MeCN, and the best substrate was found to be the N,N‐dimethylcarboxamide 9 (Table 1). The modified method can be successfully applied to an α‐amino acid derivative protected with an N‐acetyl function, i.e., to 27 (Table 2); however, loss of optical purity was observed in the cyclization when a chiral substrate (S)‐ 27 was used (Scheme 5). On the other hand, the intramolecular Pummerer reaction of the corresponding sulfoxide 20 afforded an S‐containing tricyclic system 22 , which was formed by a cyclization to the 5 position (Scheme 3).     

Photo‐Wolff Rearrangement of 2‐Diazo‐1,2‐naphthoquinone: Stern–Volmer Analysis of the Stepwise Reaction Pathway

2‐Diazo‐1,2‐naphthoquinone (1) and its derivatives are the photoactive components in Novolak photoresists. A femtosecond infrared study has established that the photoreaction of 1 proceeds largely by a concerted Wolff rearrangement yielding the ketene 1H‐inden‐1‐ylidene‐methanone (3) within 300 fs after excitation, but earlier trapping studies gave evidence for a minor reaction path via a carbene intermediate 1‐oxo‐2(1H)‐naphthalenylidene (2) with a lifetime of about 10 ps. Here, we provide a quantitative assessment of the stepwise pathway by Stern–Volmer analysis of the trapping of 2 by methanol to yield 2‐methoxy‐1‐naphthol (4). We conclude that the lifetime of the carbene 2 is at least 200 ps. Moreover, [3 + 2]cycloaddition of 2 and acetonitrile yielding 2‐methylnaphth[2,1‐d]oxazole (5) was observed. A comparison of the yields of 5 formed upon photolysis and upon thermolysis of 1 in acetonitrile provides evidence that a substantial part of the hot nascent carbene 2 formed photolytically rearranges to the ketene 3 during its vibrational relaxation (hot ground‐state reaction).     

2,4‐Disila‐1,3,5‐oxadiazin,Cyclodisilazan‐Carbonsäure‐silylamid und ‐silylester

The lithium salts of the Me₃Si‐ as well as Me₃Si‐ and Me₂SiF‐substituted Cyclotrisilazanes I and II react with tert‐butylacylchloride under ring contraction and formation of the cyclodisilazane‐silylester, Me₃SiN(SiMe₂–N)₂SiMe₂–O–CO–CMe₃ ( 1 ). The lithium salt of the fluorodi‐methylsilyl‐substituted cyclotrisilazan III forms with benzoylchloride primarily in the analogous reaction the carboxy‐silyl‐amide, Me₂SiF(N–SiMe₂)₂SiMe₂–NH–CO–C₆H₅⁺ ( 2 ), which can be converted with III and benzoylchloride into the cyclodisilazane‐silylester, Me₂SiF(NSiMe₂)₂SiMe₂–O–CO–C₆H₅, ( 3 ). A silylester substituted six‐membered disila‐oxadiazine ( 4 ) is the result of the reaction of the lithiated cyclotrisilazane, (Me₂SiNH)₂, (Me₂SiNLi) with tert‐butyl‐acylchloride. The reaction includes anionic ring contraction and can be rationilized by a process analogous to keto‐enol‐tautomerism. Dilithiated octamethyl‐cyclotetrasilazane, (Me₂SiNHMe₂SiNLi)₂, reacts with tert‐butyl‐acylchloride or benzoylchloride in a molar ratio 1:2 to yield symmetrically acylestersubstituted cyclodisilazanes, (RCO–O–SiMe₂–NSiMe₂)₂, R = C₆H₅ ( 5 ), CMe₃ ( 6 ). The reaction mechanisms are discussed and the crystal structures of 2 and 6 are reported.     

Simplified synthesis of spiro‐bridged ladder‐type poly(p‐phenylene)

In this study, a simplified route to synthesize soluble, spiro‐bridged ladder‐type poly(p‐phenylene)s (spiro‐LPPP) was developed. The new, simplified synthesis route for spiro‐LPPP involves two reaction steps: a single‐stranded precursor polymer containing diaryloylbenzene building blocks was obtained by the Suzuki reaction, followed by a subsequent twofold cyclization cascade using methanesulfonic acid to form the target spiro‐LPPP. Spiro‐LPPP shows a well‐defined chemical structure, high molecular weight (M_n of 17,500 g/mol with a polydispersity index of 2.0), excellent thermal stability (5% weight loss at 370 °C), and good solubility in common organic solvents. Spiro‐LPPP emits blue light (λ_max,em = 455 nm) with the high solution PL quantum yield (94%). The spectral properties of spiro‐LPPP in the solid state are very similar to the solution properties, thus indicating a low degree of intermolecular aggregation. After annealing a thin film of spiro‐LPPP to 120 °C in air for 3 to 24 h, its emission spectrum is unchanged, reflecting excellent thermooxidative stability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5137–5143, 2009     

Synthesis of some new 1‐acyl‐5‐aryl‐3‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐4,5‐dihydro‐1H‐pyrazole

Some new compounds (E)‐3‐aryl‐1‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐prop‐2‐en‐1‐ones 5a–e were prepared by 1‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐ethanone and various aromatic aldehydes. Then one pot reaction was happened by compounds 5a–e with hydrazine hydrate in acetic acid or propionic acid, respectively, to give the title compounds 1acyl‐5‐aryl‐3‐(5‐methyl‐1‐p‐tolyl‐1H‐1,2,3‐triazol‐4‐yl)‐4,5‐dihydro‐1H‐pyrazoles 6a–i . All structures were established by MS, IR, CHN, ¹H‐NMR and ¹³C‐NMR spectral data. J. Heterocyclic Chem., (2012).