Organic Room‐Temperature Phosphorescence with Strong Circularly Polarized Luminescence Based on Paracyclophanes

Pure organic materials with intrinsic room‐temperature phosphorescence typically rely on heavy atoms or heteroatoms. Two different strategies towards constructing organic room‐temperature phosphorescence (RTP) species based upon the through‐space charge transfer (TSCT) unit of [2.2]paracyclophane (PCP) were demonstrated. Materials with bromine atoms, PCP‐BrCz and PPCP‐BrCz, exhibit RTP lifetime of around 100 ms. Modulating the PCP core with non‐halogen‐containing electron‐withdrawing units, PCP‐TNTCz and PCP‐PyCNCz, successfully elongate the RTP lifetime to 313.59 and 528.00 ms, respectively, the afterglow of which is visible for several seconds under ambient conditions. The PCP‐TNTCz and PCP‐PyCNCz enantiomers display excellent circular polarized luminescence with dissymmetry factors as high as ?1.2×10^?2 in toluene solutions, and decent RTP lifetime of around 300 ms for PCP‐TNTCz enantiomers in crystalline state.     

Elucidating the Excited State of Mechanoluminescence in Organic Luminogens with Room‐Temperature Phosphorescence

Two stable, purely organic luminogens exhibit both mechano‐ (ML) and photoluminescence (PL) with dual fluorescence–phosphorescence emissions at room temperature. Careful analysis of the crystal structures, coupled with theoretical calculations, demonstrate that room‐temperature phosphorescence and ML properties are strongly related to molecular packing. In particular, the formation and fracture of molecular dimers with intermolecular charge‐transfer properties has a significant effect on intersystem crossing, as well as excited triplet state emissions, in both PL and ML processes.     

Aggregation‐Induced Emission with Long‐Lived Room‐Temperature Phosphorescence from Methylene‐Linked Organic Donor–Acceptor Structures

Aggregation‐caused quenching (ACQ), where excited‐state and/or ground‐state electronic structures are altered to exhibit an increased proclivity for non‐radiative decay for the aggregates, is largely responsible for the lack of fluorescence and phosphorescence in molecular solids in general. Here we show that ACQ could be effectively circumvented by constructing an aromatic system with a methylene‐linker, where the system exhibits typical aggregation‐induced emission (AIE) with long‐lived room‐temperature phosphorescence, since the tetrahedral structure in the solid state may significantly reduce strong intermolecular interactions contributing to ACQ.     

Induction of Strong Long‐Lived Room‐Temperature Phosphorescence of N‐Phenyl‐2‐naphthylamine Molecules by Confinement in a Crystalline Dibromobiphenyl Matrix

The design and preparation of metal‐free organic materials that exhibit room‐temperature phosphorescence (RTP) is a very attractive topic owing to potential applications in organic optoelectronic devices. Herein, we present a facile approach to efficient and long‐lived organic RTP involving the doping of N‐phenylnaphthalen‐2‐amine (PNA) or its derivatives into a crystalline 4,4′‐dibromobiphenyl (DBBP) matrix. The resulting materials showed strong and persistent RTP emission with a quantum efficiency of approximately 20 % and a lifetime of a few to more than 100 milliseconds. Bright white dual emission containing blue fluorescence and yellowish‐green RTP from the PNA‐doped DBBP crystals was also confirmed by Commission Internationale de l'Eclairage (CIE) coordinates of (x=0.29–0.31, y=0.38–0.41).     

Room‐Temperature Phosphorescence of Crystalline Metal‐Free Organoboron Complex

The photoluminescence (PL) properties of a metal‐free organoboron complex, bis(4‐iodobenzoyl)methanatoboron difluoride ( 1BF₂ ), were elucidated. At room temperature, 1BF₂ emits blue fluorescence (FL) in nBuCl upon photoexcitation. In contrast, crystals of 1BF₂ emit green PL comprised of FL and phosphorescence (PH). The room‐temperature PH of crystalline 1BF₂ is a consequence of 1) suppression of thermal deactivation of the S₁ and T₁ excited states and 2) enhancement of intersystem crossing (ISC) from the S₁ to T₂ or T₁. The results of X‐ray crystallographic and theoretical studies supported the proposal that the former (1) is a result of intermolecular interactions caused by π‐stacking in the rigid crystal packing structure of 1BF₂ . The latter (2) is an effect of not only the heavy‐atom effect of iodine, but also the continuous π‐stacking alignment of 1BF₂ molecules in crystals, which leads to a forbidden S₁→S₀ transition and a small energy gap between the S₁ and T₂ or T₁.     

Long‐Lived Room‐Temperature Near‐IR Phosphorescence of BODIPY in a Visible‐Light‐Harvesting N^C^N PtII–Acetylide Complex with a Directly Metalated BODIPY Chromophore

Room‐temperature long‐lived near‐IR phosphorescence of boron‐dipyrromethene (BODIPY) was observed (λ_em=770 nm, Φ_P=3.5 %, τ_P=128.4 μs). Our molecular‐design strategy is to attach Pt^II coordination centers directly onto the BODIPY π‐core using acetylide bonds, rather than on the periphery of the BODIPY core, thus maximizing the heavy‐atom effect of Pt^II. In this case, the intersystem crossing (ISC) is facilitated and the radiative decay of the T₁ excited state of BODIPY is observed, that is, the phosphorescence of BODIPY. The complex shows strong absorption in the visible range (ε=53800 M ^?1 cm^?1 at 574 nm), which is rare for Pt^II–acetylide complexes. The complex is dual emissive with ³M LCT emission at 660 nm and the ³IL emission at 770 nm. The T₁ excited state of the complex is mainly localized on the BODIPY moiety (i.e. ³IL state, as determined by steady‐state and time‐resolved spectroscopy, 77 K emission spectra, and spin‐density analysis). The strong visible‐light‐harvesting ability and long‐lived T₁ excite state of the complex were used for triplet‐triplet annihilation based upconversion and an upconversion quantum yield of 5.2 % was observed. The overall upconversion capability (η=ε×Φ_UC) of this complex is remarkable considering its strong absorption. The model complex, without the BODIPY moiety, gives no upconversion under the same experimental conditions. Our work paves the way for access to transition‐metal complexes that show strong absorption of visible light and long‐lived ³IL excited states, which are important for applications in photovoltaics, photocatalysis, and upconversions, etc.     

Self‐Stabilized Amorphous Organic Materials with Room‐Temperature Phosphorescence

The stability of pure organic room‐temperature phosphorescent (RTP) materials in air has been a research hotspot in recent years. Without crystallization or encapsulation, a new strategy was proposed to obtain self‐stabilized organic RTP materials, based on a complete ionization of a photo‐induced charge separation system. The ionization of aromatic phenol 4‐carbazolyl salicylaldehyde (CSA) formed a stable H‐bonding anion–cation radical structure and led to the completely amorphous CSA‐I film. Phosphorescent lifetimes as long as 0.14 s at room temperature and with direct exposure to air were observed. The emission intensity was also increased by 21.5‐fold. Such an amorphous RTP material reconciled the contradiction between phosphorescence stability and vapor permeability and has been successfully utilized for peroxide vapor detection.     

Molecular Engineering for Metal‐Free Amorphous Materials with Room‐Temperature Phosphorescence

Materials displaying room‐temperature phosphorescence (RTP) have been attracting wide attention in recent years due to their distinctive characteristics including long emissive lifetime and large Stokes shift, and their various applications. Most synthesized RTP materials are metal complexes that display enhanced intersystem crossing and crystallization is a common way to restrict nonradiative transition. Amorphous metal‐free RTP materials, which do not rely on expensive and toxic metals and can be prepared in a straightforward fashion, have become an important branch of the field. This Minireview summarizes recent progress in amorphous RTP materials according to the approaches used to immobilize phosphors: host–guest interactions, molecule doping, copolymers, and small‐molecule self‐assembly. Some existing challenges and insightful perspectives are given at the end of the Minireview, which should benefit the future design and development of amorphous metal‐free RTP materials.     

Intermolecular Electronic Coupling of Organic Units for Efficient Persistent Room‐Temperature Phosphorescence

Although persistent room‐temperature phosphorescence (RTP) emission has been observed for a few pure crystalline organic molecules, there is no consistent mechanism and no universal design strategy for organic persistent RTP (pRTP) materials. A new mechanism for pRTP is presented, based on combining the advantages of different excited‐state configurations in coupled intermolecular units, which may be applicable to a wide range of organic molecules. By following this mechanism, we have developed a successful design strategy to obtain bright pRTP by utilizing a heavy halogen atom to further increase the intersystem crossing rate of the coupled units. RTP with a remarkably long lifetime of 0.28 s and a very high quantum efficiency of 5 % was thus obtained under ambient conditions. This strategy represents an important step in the understanding of organic pRTP emission.     

Organic Nanocrystals with Bright Red Persistent Room‐Temperature Phosphorescence for Biological Applications

Persistent room‐temperature phosphorescence (RTP) in pure organic materials has attracted great attention because of their unique optical properties. The design of organic materials with bright red persistent RTP remains challenging. Herein, we report a new design strategy for realizing high brightness and long lifetime of red‐emissive RTP molecules, which is based on introducing an alkoxy spacer between the hybrid units in the molecule. The spacer offers easy Br−H bond formation during crystallization, which also facilitates intermolecular electron coupling to favor persistent RTP. As the majority of RTP compounds have to be confined in a rigid environment to quench nonradiative relaxation pathways for bright phosphorescence emission, nanocrystallization is used to not only rigidify the molecules but also offer the desirable size and water‐dispersity for biomedical applications.     

Mechanoluminescence or Room‐Temperature Phosphorescence: Molecular Packing‐Dependent Emission Response

Mechanoluminescence (ML) and room‐temperature photophosphorescence (RTP) were achieved in polymorphisms of a triphenylamine derivative with ortho‐substitution. This molecular packing‐dependent emission afforded crucial information to deeply understand the intrinsic mechanism of different emission forms and the possible packing–function relationship. With the incorporation of solid‐state ¹³C NMR spectra of single crystals, as well as the analysis of crystal structures, the preferred packing modes for ML and/or RTP were investigated in detail, which can guide the reasonable design of organic molecules with special light‐emission properties.     

An Ultrastable Anode for Long‐Life Room‐Temperature Sodium‐Ion Batteries

Sodium‐ion batteries are important alternative energy storage devices that have recently come again into focus for the development of large‐scale energy storage devices because sodium is an abundant and low‐cost material. However, the development of electrode materials with long‐term stability has remained a great challenge. A novel negative‐electrode material, a P2‐type layered oxide with the chemical composition Na_2/3Co_1/3Ti_2/3O₂, exhibits outstanding cycle stability (ca. 84.84 % capacity retention for 3000 cycles, very small decrease in the volume (0.046 %) after 500 cycles), good rate capability (ca. 41 % capacity retention at a discharge/charge rate of 10 C), and a usable reversible capacity of about 90 mAh g^?1 with a safe average storage voltage of approximately 0.7 V in the sodium half‐cell. This P2‐type layered oxide is a promising anode material for sodium‐ion batteries with a long cycle life and should greatly promote the development of room‐temperature sodium‐ion batteries.     

Proton‐Activated Amorphous Room‐Temperature Phosphorescence for Humidity Sensing and High‐Level Data Encryption

Supramolecular co‐assembling terpyridine‐derivatives with nanoclay ( LP ) are exploited to acquire efficient amorphous room‐temperature phosphorescence (RTP). Experimental and theoretical investigations reveal that this co‐assembly not only brings about a configuration transformation from the trans‐trans ( a ) to the cis‐trans ( a′′ ) form via the protonating process, significantly narrowing the singlet‐triplet energy gap, thereby effectively facilitating the single‐triplet ISC processes, but also well protects the triplet state and suppresses the nonradiative transitions via restricting molecular rotation and vibration by the hydrogen‐bond interactions between them. Additionally, the flexible and transparent films, through co‐assembling 1 @ LP (or 2 @ LP ) with polyvinyl alcohol (PVA), also display excellent phosphorescence performance. Owing to their distinctive RTP performances, the RH sensing and high‐level data encryption are achieved.     

Amorphous Pure Organic Polymers for Heavy‐Atom‐Free Efficient Room‐Temperature Phosphorescence Emission

Pure organic, heavy‐atom‐free room‐temperature phosphorescence (RTP) materials have attracted much attention and have potential applications in photoelectric and biochemical material fields owing to their rich excited state properties. They offer long luminescent lifetime, diversified design, and facile preparation. However, recent achievements of efficient phosphorescence under ambient conditions mainly focus on ordered crystal lattices or embedding into rigid matrices, which require strict growth conditions and have poor reproducibility. Herein, we developed a concise approach to give RTP with a decent quantum yield and ultralong phosphorescence lifetime in the amorphous state by radical binary copolymerization of acrylamide and different phosphors with oxygen‐containing functional groups. The cross‐linked hydrogen‐bonding networks between the polymeric chains immobilize phosphors to suppress non‐radiative transitions and provide a microenvironment to shield quenchers.     

Polymorphic Pure Organic Luminogens with Through‐Space Conjugation and Persistent Room‐Temperature Phosphorescence

Pure organic luminogens with persistent room‐temperature phosphorescence (p‐RTP) have attracted increasing attention owing to their vital significance and potential applications in security inks, bioimaging, and photodynamic therapy. Previously reported p‐RTP luminogens normally possessed through‐bond conjugation. In this work, we report a pure organic luminogen, AN‐MA, the Diels–Alder cycloaddition adduct of anthracene (AN) and maleic anhydride (MA), which possesses isolated phenyl groups and an anhydride moiety. AN‐MA exhibits aggregation‐enhanced emission (AEE) characteristics with efficiency of approximately 2 % and up to 8.5 % in solution and crystals, respectively. Two polymorphs of AN‐MA were readily obtained that were able to generate UV emission from individual phenyl rings together with bright blue emission owing to the effective through‐space conjugation. Moreover, p‐RTP with a lifetime of up to approximately 1.6 s was obtained in the crystals. These results not only reveal a new system with both fluorescence and RTP dual emission but also suggest an alternative through‐space conjugation strategy towards pure organic p‐RTP luminogens with tunable emissions.     

Enantiopure Cycloiridiated Complexes Bearing a Pentahelicenic N‐Heterocyclic Carbene and Displaying Long‐Lived Circularly Polarized Phosphorescence

A fused π‐helical N‐heterocyclic carbene (NHC) system was prepared and examined through its diastereoisomerically pure cycloiridiated complexes. The latter display light‐green phosphorescence with unusually long lifetimes and circular polarization that depends on both the helical NHC P /M stereochemistry and the iridium Δ/Λ stereochemistry. These unprecedented features are attributed to extended π conjugation within the helical carbenic ligand and efficient helicene‐NHC–Ir interaction.     

A Rapidly Self‐Healing Supramolecular Polymer Hydrogel with Photostimulated Room‐Temperature Phosphorescence Responsiveness

Development of self‐healing and photostimulated luminescent supramolecular polymeric materials is important for artificial soft materials. A supramolecular polymeric hydrogel is reported based on the host–guest recognition between a β‐cyclodextrin (β‐CD) host polymer (poly‐β‐CD) and an α‐bromonaphthalene (α‐BrNp) polymer (poly‐BrNp) without any additional gelator, which can self‐heal within only about one minute under ambient atmosphere without any additive. This supramolecular polymer system can be excited to engender room‐temperature phosphorescence (RTP) signals based on the fact that the inclusion of β‐CD macrocycle with α‐BrNp moiety is able to induce RTP emission (CD‐RTP). The RTP signal can be adjusted reversibly by competitive complexation of β‐CD with azobenzene moiety under specific irradiation by introducing another azobenzene guest polymer (poly‐Azo).     

Carbon Dots in a Matrix: Energy‐Transfer‐Enhanced Room‐Temperature Red Phosphorescence

High‐efficiency red room‐temperature phosphorescence (RTP) emissions have been achieved by embedding carbon dots (CDs) in crystalline Mn‐containing open‐framework matrices. The rationale of this strategy relies on two factors: 1) the carbon source, which affects the triplet energy levels of the resulting CDs and thus the spectral overlap and 2) the coordination geometry of the Mn atoms in the crystalline frameworks, which determines the crystal‐field splitting and thus the emission spectra. Embedding the carbon dots into a matrix with 6‐coordinate Mn centers resulted in a strong red RTP with a phosphorescence efficiency of up to 9.6 %, which is higher than that of most reported red RTP materials. The composite material has an ultrahigh optical stability in the presence of strong oxidants, various organic solvents, and strong ultraviolet radiation. A green‐yellow RTP composite was also prepared by using a matrix with 4‐coordinate Mn centers and different carbon precursors.     

9,9‐Dimethylxanthene Derivatives with Room‐Temperature Phosphorescence: Substituent Effects and Emissive Properties

Room‐temperature phosphorescence (RTP) emitters with ultralong lifetimes are emerging as attractive targets because of their potential applications in bioimaging, security, and other areas. But their development is limited by ambiguous mechanisms and poor understanding of the correlation of the molecular structure and RTP properties. Herein, different substituents on the 9,9‐dimethylxanthene core (XCO) result in compounds with RTP lifetimes ranging from 52 to 601 ms, which are tunable by intermolecular interactions and molecular configurations. XCO‐PiCl shows the most persistent RTP because of its reduced steric bulk and multiple sites of the 1‐chloro‐2‐methylpropan‐2‐yl (PiCl) moiety for forming intermolecular interactions in the aggregated state. The substituent effects reported provide an efficient molecular design of organic RTP materials and establishes relationships among molecular structures, intermolecular interactions, and RTP properties.     

Long Afterglow Room‐Temperature Phosphorescence from Nanopebbles: A Urea Pyrolysis Product

Materials having long afterglow are highly sought after for various applications such as light‐emitting diodes, security signs and bioimaging. Herein, we report a simple, low‐cost synthesis of a purely organic room‐temperature phosphorescent nanomaterial with a pebble‐like structure by heating urea, a biocompatible and easily available precursor, at 200 °C with a high phosphorescence lifetime of 1.0365 s and a visible afterglow for up to 10 s. This urea derived phosphorescent nanocomposite (UPNC) can be mixed with commercially available acrylic paint base and common gum, which can be readily used as a phosphorescent pigment.