Perchloric Acid–Silica (HClO4⋅SiO2)‐Catalyzed Synthesis of 14‐Alkyl‐ or 14‐Aryl‐14H‐dibenzo[a,j]xanthenes and N‐[(2‐Hydroxynaphthalen‐1‐yl)methyl]amides

The synthesis of 14‐aryl‐ or 14‐alkyl‐14H‐dibenzo[a,j]xanthenes 3 involving the treatment of naphthalen‐2‐ol ( 1 ) with arenecarboxaldehydes or alkanals 2 in the presence of HClO₄?SiO₂ as a heterogeneous catalyst was achieved (Table 1), and this reaction was extended to the preparation of N‐[(2‐hydroxynaphthalen‐1‐yl)methyl]amides 5 by a three‐component reaction with urea ( 4a ) or an amide 4b – d as a third reactant (Table 2).     

Novel glycosylated carboranylquinazolines for boron neutron capture therapy of tumors: synthesis,characterization, and in vitro toxicity studies

The synthesis of a series of N‐glycosyl caboranylquinazolines is described. The condensation reaction of nitro‐acetylanthranilic acid with aminophenylcarborane gave 3‐[(o‐carboran‐1‐yl)phenyl]‐2‐methyl‐6‐nitroquinazolin‐4(3H)‐one 1 followed by reduction with Na₂S to the corresponding 6‐amino‐3‐[(o‐carboran‐1‐yl)phenyl]‐2‐methylquinazolin‐4(3H)‐one 2 . Reaction of compound 2 with D‐glucose or D‐ribose in methanol in the presence of a catalytic amount of acetic acid affords boronated N‐glycosylaminoquinazolines namely: 2‐methyl‐3‐[4‐(o‐carboran‐1‐yl)phenyl]‐6‐[N‐β‐D‐glucopyranosyl)]aminoquinazolin‐4(3H)‐one 3 or 2‐methyl‐3‐[4‐(o‐carboran‐1‐yl)phenyl]‐6‐[N‐β‐D‐ribofuranosyl)]aminoquinazolin‐4(3H)‐one 4 , respectively. Degradation of the o‐caborane cage of compounds 3 and 4 yielded highly water‐soluble compounds of sodium 2‐methyl‐3‐[4‐( nido ‐undecarborate‐1‐yl)phenyl]‐6‐[N‐β‐D‐glucopyranosyl]aminoquinazolin‐4(3H)‐one 5 and sodium 2‐methyl‐3‐[4‐( nido ‐undecarborate‐1‐yl)phenyl]‐6‐[N‐β‐D‐ribofuranosyl)]aminoquinazolin‐4(3H)‐one 6 , respectively. The structures were established on the basis of elemental analysis, NMR, IR and mass spectrometry. The in vitro toxicity test using B16 melanoma cells showed that N‐glycosyl of nido ‐undecaboranylquinazolines ( 5 and 6 ), with higher water solubility, is not toxic at boron concentration of 3000 µg boron ml⁻¹, whereas, N‐glycosyl of closo ‐carboranylquinazolines ( 3 and 4 ) has LD₅₀ > 200 µg boron ml⁻¹. The compounds described here may be considered as potential agents for BNCT. Copyright © 2008 John Wiley & Sons, Ltd.     

Atom transfer radical copolymerization of acrylonitrile and ethyl methacrylate at ambient temperature

Copolymerization of acrylonitrile (AN) and ethyl methacrylate (EMA) using copper‐based atom transfer radical polymerization (ATRP) at ambient temperature (30 °C) using various initiators has been investigated with the aim of achieving control over molecular weight distribution. The effect of variation of concentration of the initiator, ligand, catalyst, and temperature on the molecular weight distribution and kinetics were investigated. No polymerization at ambient temperature was observed with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) ligand. The rate of polymerization exhibited 0.86 order dependence with respect to 2‐bromopropionitrile (BPN) initiator. The first‐order kinetics was observed using BPN as initiator, while curvature in first‐order kinetic plot was obtained for ethyl 2‐bromoisobutyrate (EBiB) and methyl 2‐bromopropionate (MBP), indicating that termination was taking place. Successful polymerization was also achieved with catalyst concentrations of 25 and 10% relative to initiator without loss of control over polymerization. The optimum [bpy]₀/[CuBr]₀ molar ratio for the copolymerization of AN and EMA through ATRP was found to be 3/1. For three different in‐feed ratios, the variation of copolymer composition (F_AN) with conversion indicated toward the synthesis of copolymers having slight changes in composition with conversion. The high chain‐end functionality of the synthesized AN‐EMA copolymers was verified by further chain extension with methyl acrylate and styrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1975–1984, 2006     

Synthesis and electrochromic properties of triphenylamine containing copolymers: Effect of π‐bridge on electrochemical properties

In this study, a series of benzotriazole (BTz) and triphenylamine (TPA)‐based random copolymers; poly4‐(5‐(2‐dodecyl‐7‐methyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐N‐(4‐(5‐methylthiophen‐2‐yl)phenyl)‐N‐phenylaniline ( P1 ), poly4′‐(2‐dodecyl‐7‐methyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)‐N‐(4′‐methyl‐[1,1′‐biphenyl]‐4‐yl)‐N‐phenyl‐[1,1′‐biphenyl]‐4‐amine ( P2 ), and poly4‐(5′‐(2‐dodecyl‐7‐(5‐methylthiophen‐2‐yl)?2H‐benzo[d][1,2,3]triazol‐4‐yl)‐[2,2′‐bithiophen]‐5‐yl)‐N‐(4‐(5‐methylthiophen‐2‐yl)phenyl)‐N‐phenylaniline ( P3 ) were synthesized to investigate the effect of TPA unit and π‐bridges on electrochemical and spectroelectrochemical properties of corresponding polymers. The synthesis was carried out via Stille coupling for P1 , P3 , and Suzuki coupling for P2 . Electrochemical and spectral results showed that P1 has an ambipolar character, in other words it is both p‐type and n‐type dopable, whereas P2 and P3 have only p‐doping property. Effect of different π‐bridges and TPA unit on the HOMO and LUMO energy levels, switching time, and optical contrast were discussed. All polymers are promising materials for electrochromic devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 537–544     

Ring‐opening metathesis polymerization of amino acid‐functionalized norbornene derivatives

Amino acid‐derived novel norbornene derivatives, N,N′‐(endo‐bicyclo[2.2.1] hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐alanine methyl ester (NBA), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐leucine methyl ester (NBL), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐phenylalanine methyl ester (NBF) were synthesized and polymerized using the Grubbs 2nd generation ruthenium (Ru) catalyst. Although NBA, NBL, and NBF did not undergo homopolymerization, they underwent copolymerization with norbornene (NB) to give the copolymers with M_n ranging from 5200 to 38,100. The maximum incorporation ratio of the amino acid‐based unit was 9%, and the cis contents of the main chain were 54–66%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5337–5343, 2006     

Synthesis and spectral study of a novel distamycin conjugate

The ¹H and ¹³C NMR resonances for a novel distamycin conjugate, 3‐[1‐methyl‐4‐[1‐methyl‐4‐[1‐methyl‐4‐[N¹‐[5‐methyl‐2,4(1H,3H)pyrimidinedione]acetylamino]pyrrole‐2‐carboxamido]pyrrole‐2‐carboxamido]pyrrole‐2‐carboxamido]propionamidine hydrochloride ( 1 ), were assigned, using the concerted application of one‐ and two‐dimensional NMR techniques including nuclear Overhauser effect difference, DEPT, HMQC and HMBC experiments. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones using nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl2 nanoparticles

Nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a nanoparticle Schiff base complex and a catalyst was introduced for the solvent‐free synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones by the multicomponent condensation reaction of various aromatic aldehydes, β‐naphthol, ethyl acetoacetate, and phenyl hydrazine at room temperature.     

Catalyst‐free Synthesis of Tetrahydroacenaphtho[1,2‐b]indolone Derivatives via One‐pot Four‐component Reaction

A simple and efficient one‐pot synthesis of tetrahydroacenaphtho[1,2‐b]indolone derivatives via four‐component reaction of 5,5‐dimethylcyclohexane‐1,3‐dione (dimedone), arylamines, acenaphthoquinone, and active methylene compounds under catalyst‐free conditions is described. The reactions were carried out under mild conditions using ethanol as solvent. Advantages of this method include simple experimental and workup procedure, readily available starting materials, and high yields.     

A Convenient and Facile Hantzsch Synthesis of Aryl Imidazo[1,2‐b]Isoxazolyl‐N‐aryl Thiazol Amines

The Hantzsch synthesis of novel aryl imidazo[1,2‐b]isoxazolyl‐N‐aryl thiazol amines 5 analogues were described. Reaction of 3‐aminoisoxazole 1 with substituted phenacyl bromides 2 in dry ethanol afforded the corresponding 6‐methyl‐3‐arylimidazo[1,2‐b]isoxazoles 3 in good yields. Compounds 3 on reaction with chloroacetyl chloride in 1,4‐dioxane furnished the corresponding 2‐chloro‐1‐(6‐methyl‐3‐arylimidazo[1,2‐b]isoxazol‐2‐yl)ethanones 4 . Compounds 4 on heating with N‐aryl thioureas in an oil bath underwent cyclization to afford the title compounds viz., imidazo[1,2‐b]isoxazolyl‐N‐aryl thiazol amines 5 in moderate to good yields by Hantzsch synthesis.     

Synthesis of palladium complexes derived from imidazolidin‐2‐ylidene ligands and used for catalytic amination reactions

N‐Aryl amination and the Buchwald–Hartwig reaction are of great synthetic and industrial interest and scientists accept their usefulness and versatility for obtaining arylamines. In this study Ag–N‐heterocyclic carbene complexes were used as transmetallation reagents for the synthesis of Pd–N‐heterocyclic carbene complexes. The new Pd–N‐heterocyclic carbene complexes were characterized using elemental analysis and ¹H NMR, ¹³C NMR and infrared spectroscopies. The crystal structure of one, namely dichlorobis[1,3‐bis(2‐methylbenzyl)imidazolidin‐2‐yliden]palladium(II), is presented. The activity of the Pd(II) complexes in the coupling reaction of anilines or amines with bromobenzene was investigated. These complexes exhibited high catalytic activities in the direct synthesis of triarylamines and secondary amines in a single step. Copyright © 2016 John Wiley & Sons, Ltd.     

Heterospirocyclic N‐(2H‐Azirin‐3‐yl)‐L‐prolinates: New Dipeptide Synthons

The synthesis of methyl N‐(1‐aza‐6‐oxaspiro[2.5]oct‐1‐en‐2‐yl)‐L ‐prolinate ( 1e ) has been performed by consecutive treatment of methyl N‐[(tetrahydro‐2H‐pyran‐4‐yl)thiocarbonyl]‐L ‐prolinate ( 5 ) with COCl₂, 1,4‐diazabicyclo[2.2.2]octane (DABCO), and NaN₃ (Scheme 1). As the first example of a novel class of dipeptide synthons, 1e has been shown to undergo the expected reactions with carboxylic acids and thioacids (Scheme 2). The successful preparation of the nonapeptide 16 , which is an analogue of the C‐terminal nonapeptide of the antibiotic Trichovirin I 1B, proved that 1e can be used in peptide synthesis as a dipeptide building block (Scheme 3). The structure of 7 has been established by X‐ray crystal‐structure analysis (Figs. 1 and 2).     

Synthesis of the Potassium Channel Opener (3S,4R)‐3,4‐Dihydro‐4‐(2,3‐dihydro‐2‐methyl‐3‐oxo‐pyridazin‐6‐Yl)oxy‐3‐hydroxy‐6‐(3‐hydroxyphenyl)sulphonyl‐2,2,3‐trimethyl‐2H‐benzo[b]pyran

The preparation of the potassium channel opener (3S,4R)‐3,4‐dihydro‐4‐(2,3‐dihydro‐2‐methyl‐3‐oxo‐pyridazin‐6‐yl)oxy‐3‐hydroxy‐6‐(3‐hydroxyphenyl)sulphonyl‐2,2,3‐trimethyl‐2H‐benzo[b]pyran (1) as a single enantiomer is reported. Considerable improvements have been implemented with respect to the original synthesis that allow for the preparation of multigram quantities of the final target compound. The optimized synthesis consists of a six‐step linear sequence whose key step is an asymmetric epoxidation protocol through the use of Jacobsen's (S,S)‐(+)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediaminomanganese(III) chloride catalyst.     

Use of MEKC for the analysis of reactant and product of Baylis–Hillman reaction

A facile, fast and high efficiency micellar EKC has been explored for the analysis and UV detection of p‐nitrobenzaldehyde and 2‐[hydroxy(4‐nitrophenyl)methyl]‐2‐cyclopenten‐1‐one with a buffer electrolyte of 30.0 mM tetraborate and 50.0 mM sodium taurodeoxycholate at pH 9.3. Under the optimal conditions, a linear range from 7.8×10^–2 to 5.0×10² mM for those analytes (r² > 0.99) was achieved. The LOD was 3.9 μM for 2‐[hydroxy(4‐nitrophenyl)methyl]‐2‐cyclopenten‐1‐one and 7.8 μM for p‐nitrobenzaldehyde, respectively (S/N = 3). The applicability of this new method for the analysis of reactants (p‐nitrobenzaldehyde and cyclopent‐2‐enone), catalysts (imidazole or N‐methyl imidazole or 1‐benzyl‐imidazole) and product (2‐[hydroxy(4‐nitrophenyl)methyl]‐2‐cyclopenten‐1‐one) on offline Baylis–Hillman reaction was examined. The relationship between the reaction time and the amount of product has been studied. Meanwhile, three different kinds of catalysts were investigated for getting the desired moderate to good amount products. It was found that comparing with N‐methyl imidazole or 1‐benzyl‐imidazole catalyst, imidazole‐catalyzed reaction could produce more products within the same reaction time. Furthermore, the results indicated that the rate law for the investigated Baylis–Hillman reaction was second‐order reaction. The rate constant for the reaction is 1.34 (±0.01)×10^–3 mol^–1 m³/s.     

A Highly Versatile Catalyst System for the Cross‐Coupling of Aryl Chlorides and Amines

The syntheses of 2‐(di‐tert‐butylphosphino)‐N,N‐dimethylaniline ( L1 , 71 %) and 2‐(di‐1‐adamantylphosphino)‐N,N‐dimethylaniline ( L2 , 74 %), and their application in Buchwald–Hartwig amination, are reported. In combination with [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂, these structurally simple and air‐stable P,N ligands enable the cross‐coupling of aryl and heteroaryl chlorides, including those bearing as substituents enolizable ketones, ethers, esters, carboxylic acids, phenols, alcohols, olefins, amides, and halogens, to a diverse range of amine and related substrates that includes primary alkyl‐ and arylamines, cyclic and acyclic secondary amines, N? H imines, hydrazones, lithium amide, and ammonia. In many cases, the reactions can be performed at low catalyst loadings (0.5–0.02 mol % Pd) with excellent functional group tolerance and chemoselectivity. Examples of cross‐coupling reactions involving 1,4‐bromochlorobenzene and iodobenzene are also reported. Under similar conditions, inferior catalytic performance was achieved when using Pd(OAc)₂, PdCl₂, [PdCl₂(cod)] (cod=1,5‐cyclooctadiene), [PdCl₂(MeCN)₂], or [Pd₂(dba)₃] (dba=dibenzylideneacetone) in combination with L1 or L2 , or by use of [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂ with variants of L1 and L2 bearing less basic or less sterically demanding substituents on phosphorus or lacking an ortho‐dimethylamino fragment. Given current limitations associated with established ligand classes with regard to maintaining high activity across the diverse possible range of C? N coupling applications, L1 and L2 represent unusually versatile ligand systems for the cross‐coupling of aryl chlorides and amines.     

Synthesis of N‐aryl‐2‐amino‐4‐oxo‐3,4‐dihydrothieno[2,3‐d]pyrimidine‐6‐carboxamides

Synthetic routes for the preparation of methyl 2‐amino‐4‐methoxythieno[2,3‐d]pyrimidine‐6‐carboxylate (4) ‐ useful intermediate for lipophilic and classical antifolates from 2‐amino‐4,6‐dichloropyrimidine‐5‐car‐baldehyde (1) have been studied. It has been shown that more efficient synthesis of compound 4 includes the preparation of 4‐methoxy derivative 7 and subsequent tandem substitution/annulation reaction with methyl mercaptoethanoate in dimethylformamide in the presence of potassium carbonate and molecular sieves 4 Å. Compound 4 was used for the synthesis of N‐aryl 2‐amino‐4‐oxo‐3,4‐dihydrothieno[2,3‐d]‐pyrimidine‐6‐carboxamides 10a‐c, including an analog of folic acid with amide bridge ‐ N‐(4‐{[(2‐amino‐4‐oxo‐3,4‐dihydrothieno[2,3‐d]pyrirnidin‐6‐yl)carbonyl]amino}‐benzoyl)‐L‐glutamic acid (10c) .     

Star polymers with POSS via azide–alkyne click reaction

Azidopropyl‐heptaisobutyl‐substituted polyhedral oligomeric silsesquioxane (POSS‐N₃) was reacted with 1,1,1‐tris[4‐(2‐propynyloxy)phenyl]‐ethane ( 1 ) and poly(ethylene glycol) (PEG)‐b‐poly(methyl methacrylate) (PMMA) copolymer with alkyne at its center (PEG‐PMMA‐alkyne) affording the first time synthesis of 3‐arm star POSS and PEG‐PMMA‐POSS 3‐miktoarm star terpolymer, respectively, in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst and N,N‐dimethylformamide/tetrahydrofuran as solvent at room temperature. The precursors and the target star polymers were characterized comprehensively by ¹H NMR, GPC, and DSC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5947–5953, 2009     

On triazoles XLIV [1]. synthesis of new ring systems containing imidazo[2′,1′:3,4] [1,2,4] triazolo [1,5‐a]pyrimidine and imidazo[1′,2′:2,3][1,2,4]triazolo[1,5‐a]pyrimidine skeleton

Dedicated to Dr. János Császár on the occasion of his 70^th birthday Ring transformation of 2‐cyanoimido‐3‐methyl‐1,3‐oxazolidine ( 10 ) yielded 5‐amino‐3‐[N‐(2‐hydrox‐yethyl)‐N‐methyl]amino‐1H‐1,2,4‐triazole ( 6 ) that was ring closed with different β‐keto esters to 2‐[N‐(2‐hydroxyethyl)‐N‐methyl]amino‐1,2,4‐triazolo[1,5‐a]pyrimidinones ( 4 ). Cyclisation of derivatives 4 led to imidazo[2′,1′:3,4][1,2,4]triazolo[1,5‐a]pyrimidines ( 2 ) and imidazo[1′,2′:2,3][1,2,4]triazolo[1,5‐a]pyrim‐idines ( 3 ) representing 10 novel ring systems. Besides spectroscopical evidence of structure of derivatives 2 and 3 X‐ray diffraction analysis of derivative 2b was also performed.     

Synthesis of photoreactive calixarene derivatives containing pendant cyclic ether groups

New photoreactive calixarene derivatives containing cationically polymerizable pendant oxetane groups (calixarenes 1a , b , 2a , b , and 3a , b ) were synthesized in good yields by the substitution reaction of C‐methylcalix[4]resorcinarene (CRA), p‐methylcalix[6]arene (MCA), and p‐tert‐butylcalix[8]arene (BCA) with (3‐methyloxetan‐3‐yl)methyl 4‐toluenesulfonate and (3‐ethyloxetan‐3‐yl)methyl 4‐toluenesulfonate with potassium hydroxide as a base and tetrabutylammonium bromide as a phase‐transfer catalyst in N‐methyl‐2‐pyrrolidone, respectively. Calixarene derivatives containing cationically polymerizable pendant oxirane groups (calixarenes 4 , 5 , and 6 ) were also prepared in good yields by the substitution reaction of CRA, MCA, and BCA with epibromohydrin, respectively, with cesium carbonate as a base in N‐methyl‐2‐pyrrolidone. The thermal stability of the obtained calixarene derivatives containing pendant oxetane groups or oxirane groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had thermal stability beyond 340 °C. The photochemical reaction of calixarenes 1 , 2 , and 3 containing pendant oxetane groups was examined with certain photoacid generators in the film state. In this reaction system, calixarene 1a , composed of a CRA structure and pendant (3‐methyloxetan‐3‐yl)methyl groups, showed the highest photochemical reactivity when bis‐[4‐(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) was used as the catalyst. The photochemical reaction of calixarenes 4 , 5 , and 6 containing pendant oxirane groups was also examined, and it was found that the photoinitiated cationic polymerization of calixarenes 4 , 5 , and 6 proceeded smoothly under the same conditions; however, the reaction rates were lower than those of the corresponding calixarenes 1 , 2 , and 3 containing pendant oxetane groups. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1169–1179, 2001     

A Convenient and Facile Synthesis of Isoxazolyl‐chromeno[4,3,2‐de]pyrimido[4,5‐h][1,6]napthyridinones

The ceric ammonium nitrate‐catalyzed synthesis of (E)‐5‐amino‐N‐(3‐methyl‐5‐styrylisoxazol‐4‐yl)‐2‐arylchromeno[4,3,2‐de][1,6]napthyridin‐4‐carboxamides 5 was simply achieved upon the one‐pot four‐component reaction of isoxazolyl cyanoacetamide 1 with malononitrile 2 , 2‐hydroxy acetophenone 3 , and aromatic aldehydes 4 in ethanol. Compounds 5 on heating with acetic anhydride underwent tandem N‐acetylation and cyclocondensation involving intramolecular cyclization to afford the title compounds (E)‐11‐methyl‐12‐(3‐methyl‐5‐styrylisoxazol‐4‐yl)‐2‐arylchromeno[4,3,2‐de][1,6]napthyridin‐13(12H)‐ones 6 in good yields. The chemical structures have been confirmed by analytical and spectral analyses.     

Four NiII complexes with the new cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane

Although it has not proved possible to crystallize the newly prepared cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane (L^Im1), the trans and cis isomers of an Ni^II complex, namely trans‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) monohydrate, [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂·H₂O, (1), and cis‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate), [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂, (2), have been prepared and structurally characterized. At different stages of the crystallization and thermal treatment from which (1) and (2) were obtained, a further two compounds were isolated in crystalline form and their structures also analysed, namely trans‐{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}(perchlorato)nickel(II) perchlorate, [Ni(ClO₄)(C₁₅H₃₀N₆)]ClO₄, (3), and cis‐{1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) 0.24‐hydrate, [Ni(C₂₀H₃₆N₆)](ClO₄)₂·0.24H₂O, (4); the 1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane ligand is a minor side product, probably formed in trace amounts in the synthesis of L^Im1. The configurations of the cyclam macrocycles in the complexes have been analysed and the structures are compared with analogues from the literature.