Unraveling the role of Ti_3C_2 MXene underlayer for enhanced photoelectrochemical water oxidation of hematite photoanodes

Hematite is regarded as a promising photoanode for photoelectrochemical(PEC) water splitting.However,the charge recombination occurred at the interface of FTO/hematite strictly limits the PEC performance of hematite.Herein,we reported a Ti3C2 MXene underlayer modified hematite(Ti-Fe2O3) photoanode via a simple drop-casting followed by hydrothermal and annealing processes.Owing to the bifunctional role of Ti3C2 MXene underlayer in improving the interfacial properties of FTO/hematite and providing Ti source for the construction of Fe2 TiO5/Fe2O3 heterostructure in hematite nanostructure,the bulk and interfacial charge transfer dynamics of hematite are significantly enhanced,and consequently enhancing the PEC performance.Compared with the pristine hematite,the as-prepared Ti-Fe2O3 photoanode shows an increased photocurrent density from 0.80 mA/cm² to 1.30 mA/cm² at 1.23 V vs.RHE.Moreover,a further promoted PEC performance including a dramatically increased photocurrent density of 2.49 mA/cm² at1.23 V vs.RHE and an obviously lowered onset potential is achieved for the Ti-Fe2O3 sample after the subsequent surface F-treatment and the loading of FeNiOOH cocatalyst.Such results suggest that the introduction of Ti3C2 MXene underlayer is a facile but effective approach to improve the PEC water splitting activity of hematite.     

An Efficient Strategy for Boosting Photogenerated Charge Separation by Using Porphyrins as Interfacial Charge Mediators

Surface recombination at the photoanode/electrolyte junction seriously impedes photoelectrochemical (PEC) performance. Through coating of photoanodes with oxygen evolution catalysts, the photocurrent can be enhanced; however, current systems for water splitting still suffer from high recombination. We describe herein a novel charge transfer system designed with BiVO₄ as a prototype. In this system, porphyrins act as an interfacial‐charge‐transfer mediator, like a volleyball setter, to efficiently suppress surface recombination through higher hole‐transfer kinetics rather than as a traditional photosensitizer. Furthermore, we found that the introduction of a “setter” can ensure a long lifetime of charge carriers at the photoanode/electrolyte interface. This simple interface charge‐modulation system exhibits increased photocurrent density from 0.68 to 4.75 mA cm^?2 and provides a promising design strategy for efficient photogenerated charge separation to improve PEC performance.     

Dendritic Hematite Nanoarray Photoanode Modified with a Conformal Titanium Dioxide Interlayer for Effective Charge Collection

This paper describes the introduction of a thin titanium dioxide interlayer that serves as passivation layer and dopant source for hematite (α‐Fe₂O₃) nanoarray photoanodes. This interlayer is demonstrated to boost the photocurrent by suppressing the substrate/hematite interfacial charge recombination, and to increase the electrical conductivity by enabling Ti⁴⁺ incorporation. The dendritic nanostructure of this photoanode with an increased solid–liquid junction area further improves the surface charge collection efficiency, generating a photocurrent of about 2.5 mA cm⁻² at 1.23 V versus the reversible hydrogen electrode (vs. RHE) under air mass 1.5G illumination. A photocurrent of approximately 3.1 mA cm⁻² at 1.23 V vs. RHE could be achieved by addition of an iron oxide hydroxide cocatalyst.     

Ultra‐Narrow Depletion Layers in a Hematite Mesocrystal‐Based Photoanode for Boosting Multihole Water Oxidation

Significant charge recombination that is difficult to suppress limits the practical applications of hematite (α‐Fe₂O₃) for photoelectrochemical water splitting. In this study, Ti‐modified hematite mesocrystal superstructures assembled from highly oriented tiny nanoparticle (NP) subunits with sizes of ca. 5 nm were developed to achieve the highest photocurrent density (4.3 mA cm^?2 at 1.23 V vs. RHE) ever reported for hematite‐based photoanodes under back illumination. Owing to rich interfacial oxygen vacancies yielding an exceedingly high carrier density of 4.1×10²¹ cm^?3 for super bulk conductivity in the electrode and a large proportion of ultra‐narrow depletion layers (<1 nm) inside the mesoporous film for significantly improved hole collection efficiency, a boosting of multihole water oxidation with very low activation energy (E_a=44 meV) was realized.     

Dual Oxygen and Tungsten Vacancies on a WO3 Photoanode for Enhanced Water Oxidation

Alleviating charge recombination at the electrode/electrolyte interface by introducing an overlayer is considered an efficient approach to improve photoelectrochemical (PEC) water oxidation. A WO₃ overlayer with dual oxygen and tungsten vacancies was prepared by using a solution‐based reducing agent, LEDA (lithium dissolved in ethylenediamine), which improved the PEC performance of the mesoporous WO₃ photoanode dramatically. In comparison to the pristine samples, the interconnected WO₃ nanoparticles surrounded by a 2–2.5 nm thick overlayer exhibited a photocurrent density approximately 2.4 times higher and a marked cathodic shift of the onset potential, which is mainly attributed to the facilitative effect on interface charge transfer and the improved conductivity by enhanced charge carrier density. This simple and effective strategy may provide a new path to improve the PEC performance of other photoanodes.     

Ultra-Narrow Depletion Layers in a Hematite Mesocrystal-Based Photoanode for Boosting Multihole Water Oxidation

Significant charge recombination that is difficult to suppress limits the practical applications of hematite (α-Fe₂O₃) for photoelectrochemical water splitting. In this study, Ti-modified hematite mesocrystal superstructures assembled from highly oriented tiny nanoparticle (NP) subunits with sizes of ca. 5 nm were developed to achieve the highest photocurrent density (4.3 mA cm⁻² at 1.23 V vs. RHE) ever reported for hematite-based photoanodes under back illumination. Owing to rich interfacial oxygen vacancies yielding an exceedingly high carrier density of 4.1×10²¹ cm⁻³ for super bulk conductivity in the electrode and a large proportion of ultra-narrow depletion layers (<1 nm) inside the mesoporous film for significantly improved hole collection efficiency, a boosting of multihole water oxidation with very low activation energy (E_a=44 meV) was realized.     

Stable Cocatalyst-Free BiVO4 Photoanodes with Passivated Surface States for Photocorrosion Inhibition

Improving charge transport and reducing bulk/surface recombination can increase the activity and stability of BiVO₄ for water oxidation. Herein we demonstrate that the photoelectrochemical (PEC) performance of BiVO₄ can be significantly improved by potentiostatic photopolarization. The resulting cocatalyst-free BiVO₄ photoanode exhibited a record-high photocurrent of 4.60 mA cm⁻² at 1.23 V_RHE with an outstanding onset potential of 0.23 V_RHE in borate buffer without a sacrificial agent under AM 1.5G illumination. The most striking characteristic was a strong “self-healing” property of the photoanode, with photostability observed over 100 h under intermittent testing. The synergistic effects of the generated oxygen vacancies and the passivated surface states at the semiconductor–electrolyte interface as a result of potentiostatic photopolarization reduced the substantial carrier recombination and enhanced the water oxidation kinetics, further inhibiting photocorrosion.     

Doping‐Induced Amorphization,Vacancy, and Gradient Energy Band in SnS2 Nanosheet Arrays for Improved Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising strategy to convert solar energy into hydrogen fuel. However, the poor bulk charge‐separation ability and slow surface oxygen evolution reaction (OER) dynamics of photoelectrodes impede the performance. We construct In‐ and Zn/In‐doped SnS₂ nanosheet arrays through a hydrothermal method. The doping induces the simultaneous formation of an amorphous layer, S vacancies, and a gradient energy band. This leads to elevated carrier concentrations, an increased number of surface‐reaction sites, accelerated surface‐OER kinetics, and an enhanced bulk‐carrier separation efficiency with a decreased recombination rate. This efficient doping strategy allows to manipulate the morphology, crystallinity, and band structure of photoelectrodes for an improved PEC performance.     

Doping‐Induced Amorphization,Vacancy, and Gradient Energy Band in SnS2 Nanosheet Arrays for Improved Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising strategy to convert solar energy into hydrogen fuel. However, the poor bulk charge‐separation ability and slow surface oxygen evolution reaction (OER) dynamics of photoelectrodes impede the performance. We construct In‐ and Zn/In‐doped SnS₂ nanosheet arrays through a hydrothermal method. The doping induces the simultaneous formation of an amorphous layer, S vacancies, and a gradient energy band. This leads to elevated carrier concentrations, an increased number of surface‐reaction sites, accelerated surface‐OER kinetics, and an enhanced bulk‐carrier separation efficiency with a decreased recombination rate. This efficient doping strategy allows to manipulate the morphology, crystallinity, and band structure of photoelectrodes for an improved PEC performance.     

Carbon‐Nanoplated CoS@TiO2 Nanofibrous Membrane: An Interface‐Engineered Heterojunction for High‐Efficiency Electrocatalytic Nitrogen Reduction

Developing noble‐metal‐free electrocatalysts is important to industrially viable ammonia synthesis through the nitrogen reduction reaction (NRR). However, the present transition‐metal electrocatalysts still suffer from low activity and Faradaic efficiency due to poor interfacial reaction kinetics. Herein, an interface‐engineered heterojunction, composed of CoS nanosheets anchored on a TiO₂ nanofibrous membrane, is developed. The TiO₂ nanofibrous membrane can uniformly confine the CoS nanosheets against agglomeration, and contribute substantially to the NRR performance. The intimate coupling between CoS and TiO₂ enables easy charge transfer, resulting in fast reaction kinetics at the heterointerface. The conductivity and structural integrity of the heterojunction are further enhanced by carbon nanoplating. The resulting C@CoS@TiO₂ electrocatalyst achieves a high ammonia yield (8.09×10^?10 mol s^?1 cm^?2) and Faradaic efficiency (28.6 %), as well as long‐term durability.     

A Rutile TiO2 Electron Transport Layer for the Enhancement of Charge Collection for Efficient Perovskite Solar Cells

Interfacial charge collection efficiency has demonstrated significant effects on the power conversion efficiency (PCE) of perovskite solar cells (PSCs). Herein, crystalline phase‐dependent charge collection is investigated by using rutile and anatase TiO₂ electron transport layer (ETL) to fabricate PSCs. The results show that rutile TiO₂ ETL enhances the extraction and transportation of electrons to FTO and reduces the recombination, thanks to its better conductivity and improved interface with the CH₃NH₃PbI₃ (MAPbI₃) layer. Moreover, this may be also attributed to the fact that rutile TiO₂ has better match with perovskite grains, and less trap density. As a result, comparing with anatase TiO₂ ETL, MAPbI₃ PSCs with rutile TiO₂ ETL delivers significantly enhanced performance with a champion PCE of 20.9 % and a large open circuit voltage (V_OC) of 1.17 V.     

Unraveling the Interfacial Charge Migration Pathway at the Atomic Level in a Highly Efficient Z‐Scheme Photocatalyst

A highly efficient Z‐scheme photocatalytic system constructed with 1D CdS and 2D CoS₂ exhibited high photocatalytic hydrogen‐evolution activity of 5.54 mmol h^?1 g^?1 with an apparent quantum efficiency of 10.2 % at 420 nm. More importantly, its interfacial charge migration pathway was unraveled: The electrons are efficiently transferred from CdS to CoS₂ through a transition atomic layer connected by Co–S_5.8 coordination, thus resulting in more photogenerated carriers participating in surface reactions. Furthermore, the charge‐trapping and charge‐transfer processes were investigated by transient absorption spectroscopy, which gave an estimated charge‐separation yield of approximately 91.5 % and a charge‐separated‐state lifetime of approximately (5.2±0.5) ns in CdS/CoS₂. This study elucidates the key role of interfacial atomic layers in heterojunctions and will facilitate the development of more efficient Z‐scheme photocatalytic systems.     

Energetics and kinetics of light-driven oxygen evolution at semiconductor electrodes: the example of hematite

Light-driven water-splitting (photoelectrolysis) at semiconductor electrodes continues to excite interest as a potential route to produce hydrogen as a sustainable fuel, but surprisingly little is known about the kinetics and mechanisms of the reactions involved. Here, some basic principles of semiconductor photoelectrochemistry are reviewed with particular emphasis on the effects of slow interfacial electron transfer at n-type semiconductors in the case of light-driven oxygen evolution. A simple kinetic model is outlined that considers the competition between interfacial transfer of photogenerated holes and surface recombination. The model shows that, if interfacial charge transfer is very slow, the build-up of holes at the surface will lead to substantial changes in the potential drop across the Helmholtz layer, leading to non-ideal behavior (Fermi level pinning). The kinetic model is also used to predict the response of photoanodes to chopped illumination and to periodic perturbations of illumination and potential. Recent experimental results obtained for α-Fe₂O₃ (hematite) photoanodes are reviewed and interpreted within the framework of the model.     

A Titanium‐Doped SiOx Passivation Layer for Greatly Enhanced Performance of a Hematite‐Based Photoelectrochemical System

This study introduces an in situ fabrication of nanoporous hematite with a Ti‐doped SiO_x passivation layer for a high‐performance water‐splitting system. The nanoporous hematite with a Ti‐doped SiO_x layer (Ti‐(SiO_x/np‐Fe₂O₃)) has a photocurrent density of 2.44 mA cm^?2 at 1.23 V_RHE and 3.70 mA cm^?2 at 1.50 V_RHE. When a cobalt phosphate co‐catalyst was applied to Ti‐(SiO_x/np‐Fe₂O₃), the photocurrent density reached 3.19 mA cm^?2 at 1.23 V_RHE with stability, which shows great potential of the use of the Ti‐doped SiO_x layer with a synergistic effect of decreased charge recombination, the increased number of active sites, and the reduced hole‐diffusion pathway from the hematite to the electrolyte.     

A co-activation strategy for enhancing the performance of hematite in photoelectrochemical water oxidation

Hematite(α-Fe_2O_3) is a promising photoanode for photoelectrochemical(PEC) water splitting.However,the severe charge recombination and sluggish water oxidation kinetics extremely limit its use in photohydrogen conversion.Herein,a co-activation strategy is proposed,namely through phosphorus(P)doping and the loading of CoAl-layered double hydroxides(CoAl-LDHs) cocatalysts.Unexpectedly,the integrated system,CoAl-LDHs/P-Fe_2O_3 photoanode,exhibits an outstanding photocurrent density of 1.56 mA/cm~2 at 1.23 V(vs.reversible hydrogen electrode,RHE),under AM 1.5 G,which is 2.6 times of pureα-Fe_2O_3.Systematic studies reveal that the remarkable PEC performance is attributed to accelerated surface OER kinetics and enhanced carrier separation efficiency.This work provides a feasible strategy to enhance the PEC performance of hematite photoanodes.     

Impedance Analysis of Inherently Redox‐Active Ionic‐Liquid‐Based Photoelectrochemical Cells: Charge‐Transfer Mechanism in the Presence of an Additional Redox Couple

An intensive electrochemical impedance study was carried out to understand the charge‐transfer processes in photoelectrochemical (PEC) cells based on ionic liquid (IL) electrolytes. Three different electrolytes were utilized to understand the role of redox species as well as the medium on the charge‐transfer mechanism. The negligible diffusion resistance, despite the presence of two different redox species in the case of Fe(CN)₆^?4/?3 in IL, was explained on the basis of charge transfer between species of two different redox couples. Accordingly, the redox species are not required to travel through the bulk of the electrolyte for the removal of accumulated charges, as short‐range charge transfer between the IL and the Fe(CN)₆^?4/?3 species facilitates the removal of accumulated charges. It is also shown that PEC cells utilizing dual redox couples are highly stable with larger photoelectrochmeical windows, >3 V.     

A Nanojunction Polymer Photoelectrode for Efficient Charge Transport and Separation

A metal‐free photoanode nanojunction architecture, composed of B‐doped carbon nitride nanolayer and bulk carbon nitride, was fabricated by a one‐step approach. This type of nanojunction (s‐BCN) overcomes a few intrinsic drawbacks of carbon nitride film (severe bulk charge recombination and slow charge transfer). The top layer of the nanojunction has a depth of ca. 100 nm and the bottom layer is ca. 900 nm. The nanojunction photoanode results into a 10‐fold higher photocurrent than bulk graphitic carbon nitride (G‐CN) photoanode, with a record photocurrent density of 103.2 μA cm⁻² at 1.23 V vs. RHE under one sun irradiation and an extremely high incident photon‐to‐current efficiency (IPCE) of ca. 10 % at 400 nm. Electrochemical impedance spectroscopy, Mott–Schottky plots, and intensity‐modulated photocurrent spectroscopy show that such enhancement is mainly due to the mitigated deep trap states, a more than 10 times faster charge transfer rate and nearly three times higher conductivity due to the nanojunction architecture.     

Colloidal Synthesis and Charge‐Carrier Dynamics of Cs2AgSb1−yBiyX6 (X: Br,Cl; 0 ≤y ≤1) Double Perovskite Nanocrystals

A series of lead‐free double perovskite nanocrystals (NCs) Cs₂AgSb_1?yBi_yX₆ (X: Br, Cl; 0≤y≤1) is synthesized. In particular, the Cs₂AgSbBr₆ NCs is a new double perovskite material that has not been reported for the bulk form. Mixed Ag–Sb/Bi NCs exhibit enhanced stability in colloidal solution compared to Ag–Bi or Ag–Sb NCs. Femtosecond transient absorption studies indicate the presence of two prominent fast trapping processes in the charge‐carrier relaxation. The two fast trapping processes are dominated by intrinsic self‐trapping (ca. 1–2 ps) arising from giant exciton–phonon coupling and surface‐defect trapping (ca. 50–100 ps). Slow hot‐carrier relaxation is observed at high pump fluence, and the possible mechanisms for the slow hot‐carrier relaxation are also discussed.     

Hybrid Polymer/Garnet Electrolyte with a Small Interfacial Resistance for Lithium‐Ion Batteries

Li₇La₃Zr₂O₁₂‐based Li‐rich garnets react with water and carbon dioxide in air to form a Li‐ion insulating Li₂CO₃ layer on the surface of the garnet particles, which results in a large interfacial resistance for Li‐ion transfer. Here, we introduce LiF to garnet Li_6.5La₃Zr_1.5Ta_0.5O₁₂ (LLZT) to increase the stability of the garnet electrolyte against moist air; the garnet LLZT‐2 wt % LiF (LLZT‐2LiF) has less Li₂CO₃ on the surface and shows a small interfacial resistance with Li metal, a solid polymer electrolyte, and organic‐liquid electrolytes. An all‐solid‐state Li/polymer/LLZT‐2LiF/LiFePO₄ battery has a high Coulombic efficiency and long cycle life; a Li‐S cell with the LLZT‐2LiF electrolyte as a separator, which blocks the polysulfide transport towards the Li‐metal, also has high Coulombic efficiency and kept 93 % of its capacity after 100 cycles.     

High-performance bulk heterojunction-based photocathode with facile architecture for photoelectrochemical water splitting

Organic semiconductors are promising candidates as photoactive layers for photoelectrodes used in photoelectrochemical (PEC) cells due to their excellent light absorption and efficient charge transport properties with the help of interfacial materials. However, the use of multilayers will make the charge transfer mechanism more complicated and decrease the PEC performance of the photoelectrode caused by the increased contact resistance. In this work, a PM6:Y6 bulk heterojunction (BHJ)-based photocathode is fabricated for efficient PEC hydrogen evolution reaction (HER) in an acidic aqueous solution. With RuO₂ as an interfacial modification layer, the photocathode with a simple structure (fluorine-doped tin oxide (FTO)/PM6:Y6/RuO₂) generates a maximum photocurrent density up to ?15 mA/cm² at 0 V vs. reference hydrogen electrode (RHE), outperforming all previously reported BHJ-based photocathodes in terms of PEC performance. The highest ratiometric power-saved efficiency of 3.7% is achieved at 0.4 V vs. RHE.