A Cation‐Exchange Approach for the Fabrication of Efficient Methylammonium Tin Iodide Perovskite Solar Cells

Tin‐based halide perovskite materials have been successfully employed in lead‐free perovskite solar cells, but the overall power conversion efficiencies (PCEs) have been limited by the high carrier concentration from the facile oxidation of Sn²⁺ to Sn⁴⁺. Now a chemical route is developed for fabrication of high‐quality methylammonium tin iodide perovskite (MASnI₃) films: hydrazinium tin iodide (HASnI₃) perovskite film is first solution‐deposited using presursors hydrazinium iodide (HAI) and tin iodide (SnI₂), and then transformed into MASnI₃ via a cation displacement approach. With the two‐step process, a dense and uniform MASnI₃ film is obtained with large grain sizes and high crystallization. Detrimental oxidation is suppressed by the hydrazine released from the film during the transformation. With the MASnI₃ as light harvester, mesoporous perovskite solar cells were prepared, and a maximum power conversion efficiency (PCE) of 7.13 % is delivered with good reproducibility.     

Generalized Self‐Doping Engineering towards Ultrathin and Large‐Sized Two‐Dimensional Homologous Perovskites

Two‐dimensional (2D) homologous perovskites are arousing intense interest in photovoltaics and light‐emitting fields, attributing to significantly improved stability and increasing optoelectronic performance. However, investigations on 2D homologous perovskites with ultrathin thickness and large lateral dimension have been seldom reported, being mainly hindered by challenges in synthesis. A generalized self‐doping directed synthesis of ultrathin 2D homologous (BA)₂(MA)_{n −1}Pb_n Br_{3n +1} (1<n <∞) perovskites uses 2D (BA)₂PbBr₄ perovskites as the template with MA⁺ dopant. Ultrathin (BA)₂(MA)_{n −1}Pb_n Br_{3n +1} perovskites are formed via an intercalation–merging mechanism, with thickness shrinking down to 4.2 nm and the lateral dimension to 57 μm. The ultrathin 2D homologous (BA)₂(MA)_{n −1}Pb_n Br_{3n +1} perovskites are potential materials for photodetectors with promising photoresponse and stability.     

Self‐Assembly of Hybrid Oxidant POM@Cu‐BTC for Enhanced Efficiency and Long‐Term Stability of Perovskite Solar Cells

The controllable oxidation of spiro‐OMeTAD and improving the stability of hole‐transport materials (HTMs) layer are crucial for good performance and stability of perovskite solar cells (PSCs). Herein, we report an efficient hybrid polyoxometalate@metal–organic framework (POM@MOF) material, [Cu₂(BTC)_4/3(H₂O)₂]₆[H₃PMo₁₂O₄₀]₂ or POM@Cu‐BTC, for the oxidation of spiro‐OMeTAD with Li‐TFSI and TBP. When POM@Cu‐BTC is introduced to the HTM layer as a dopant, the PSCs achieve a superior fill factor of 0.80 and enhanced power conversion efficiency 21.44 %, as well as improved long‐term stability in an ambient atmosphere without encapsulation. The enhanced performance is attributed to the oxidation activity of POM anions and solid‐state nanoparticles. Therefore, this research presents a facile way by using hybrid porous materials to accelerate oxidation of spiro‐OMeTAD, further improving the efficiency and stability of PSCs.     

Methylammonium‐Mediated Evolution of Mixed‐Organic‐Cation Perovskite Thin Films: A Dynamic Composition‐Tuning Process

Methylammonium‐mediated phase‐evolution behavior of FA_1−xMA_xPbI₃ mixed‐organic‐cation perovskite (MOCP) is studied. It is found that by simply enriching the MOCP precursor solutions with excess methylammonium cations, the MOCPs form via a dynamic composition‐tuning process that is key to obtaining MOCP thin films with superior properties. This simple chemical approach addresses several key challenges, such as control over phase purity, uniformity, grain size, composition, etc., associated with the solution‐growth of MOCP thin films with targeted compositions.     

Hole‐Boosted Cu(Cr,M)O2 Nanocrystals for All‐Inorganic CsPbBr3 Perovskite Solar Cells

The all‐inorganic CsPbBr₃ perovskite solar cell (PSC) is a promising solution to balance the high efficiency and poor stability of state‐of‐the‐art organic–inorganic PSCs. Setting inorganic hole‐transporting layers at the perovskite/electrode interface decreases charge carrier recombination without sacrificing superiority in air. Now, M‐substituted, p‐type inorganic Cu(Cr,M)O₂ (M=Ba²⁺, Ca²⁺, or Ni²⁺) nanocrystals with enhanced hole‐transporting characteristics by increasing interstitial oxygen effectively extract holes from perovskite. The all‐inorganic CsPbBr₃ PSC with a device structure of FTO/c‐TiO₂/m‐TiO₂/CsPbBr₃/Cu(Cr,M)O₂/carbon achieves an efficiency up to 10.18 % and it increases to 10.79 % by doping Sm³⁺ ions into perovskite halide, which is much higher than 7.39 % for the hole‐free device. The unencapsulated Cu(Cr,Ba)O₂‐based PSC presents a remarkable stability in air in either 80 % humidity over 60 days or 80 °C conditions over 40 days or light illumination for 7 days.     

Formation of Stable Tin Perovskites Co‐crystallized with Three Halides for Carbon‐Based Mesoscopic Lead‐Free Perovskite Solar Cells

We synthesized and characterized methylammonium (MA) mixed tri‐halide tin perovskites (MASnIBr_2−x Cl_x) for carbon‐based mesoscopic solar cells free of lead and hole‐transporting layers. Varied SnCl₂/SnBr₂ ratios yielded tin perovskites with three halides (I, Br, and Cl) co‐crystallized inside the tin‐perovskite. When the SnCl₂ proportion was ≥50 % (x ≥1), phase separation occurred to give MASnI_3−y Br_y and MASnCl_3−z Br_z in the stoichiometric proportions of their precursors, confirmed by XRD. A device with MASnIBr_1.8Cl_0.2 (SnCl₂=10 %) showed the best photovoltaic performance: J _SC=14.0 mA cm⁻², V _OC=380 mV, FF=0.573, and PCE=3.1 %, and long‐term stability. Electrochemical impedance spectra (EIS) show superior charge recombination and dielectric relaxation properties for the MASnIBr_1.8Cl_0.2 cell. Transient PL decays showed the intrinsic problem of tin‐based perovskites with average lifetimes less than 100 ps.     

Cove‐Edge Nanoribbon Materials for Efficient Inverted Halide Perovskite Solar Cells

Two cove‐edge graphene nanoribbons hPDI2‐Pyr‐hPDI2 ( 1 ) and hPDI3‐Pyr‐hPDI3 ( 2 ) are used as efficient electron‐transporting materials (ETMs) in inverted planar perovskite solar cells (PSCs). Devices based on the new graphene nanoribbons exhibit maximum power‐conversion efficiencies (PCEs) of 15.6 % and 16.5 % for 1 and 2 , respectively, while a maximum PCE of 14.9 % is achieved with devices based on [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM). The interfacial effects induced by these new materials are studied using photoluminescence (PL), and we find that 1 and 2 act as efficient electron‐extraction materials. Additionally, compared with PC₆₁BM, these new materials are more hydrophobic and have slightly higher LUMO energy levels, thus providing better device performance and higher device stability.     

An All‐Inorganic Colloidal Nanocrystal Flexible Polarizer

Inorganic single crystals with anisotropic structures usually suffer from high brittleness and stiffness. Flexible polymers are used to replace inorganic crystals, but the hot‐stretching‐induced orientation process is tedious, and oriented molecular chains tend to revert to random coils during aging. To overcome these obstacles and using the similarities between sub‐1 nm nanowires (NWs) and linear polymers, we successfully fabricated anisotropic, transparent, flexible, and stable (ATFS) NW films with great potential for optical applications through a wet‐spinning method. The NW films show birefringence, and their birefractive index is higher than that of many polymers. They also showed polarized absorption of UV light and anisotropic scattering of visible light. The integrated films composed of NWs and quantum dots showed good fluorescence polarization. The tedious synthesis of quantum rods and fabrication of oriented polymer films can thus be avoided.     

High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency

All‐inorganic perovskite solar cells with high efficiency and improved stability are promising for commercialization. A multistep solution‐processing method was developed to fabricate high‐purity inorganic CsPbBr₃ perovskite films for use in efficient solar cells. By tuning the number of deposition cycles (n) of a CsBr solution, the phase conversion from CsPb₂Br₅ (n ≤3), to CsPbBr₃ (n=4), and Cs₄PbBr₆ (n≥5) was optimized to achieve vertical‐ and monolayer‐aligned grains. Upon interfacial modification with graphene quantum dots, the all‐inorganic perovskite solar cell (without a hole‐transporting layer) achieved a power conversion efficiency (PCE) as high as 9.72 % under standard solar illumination conditions. Under challenging conditions, such as 90 % relative humidity (RH) at 25 °C or 80 °C at zero humidity, the optimized device retained 87 % PCE over 130 days or 95 % over 40 days, compared to the initial efficiency.     

Inexpensive Hole‐Transporting Materials Derived from Tröger's Base Afford Efficient and Stable Perovskite Solar Cells

The synthesis of three enamine hole‐transporting materials (HTMs) based on Tröger's base scaffold are reported. These compounds are obtained in a three‐step facile synthesis from commercially available materials without the need of expensive catalysts, inert conditions or time‐consuming purification steps. The best performing material, HTM3, demonstrated 18.62 % PCE in PSCs, rivaling spiro‐OMeTAD in efficiency, and showing markedly superior long‐term stability in non‐encapsulated devices. In dopant‐free PSCs, HTM3 outperformed spiro‐OMeTAD by a factror of 1.6. The high glass‐transition temperature (T_g=176 °C) of HTM3 also suggests promising perspectives in device applications.     

Antioxidant Grain Passivation for Air‐Stable Tin‐Based Perovskite Solar Cells

Tin‐based perovskites with excellent optoelectronic properties and suitable band gaps are promising candidates for the preparation of efficient lead‐free perovskite solar cells (PSCs). However, it is challenging to prepare highly stable and efficient tin‐based PSCs because Sn²⁺ in perovskites can be easily oxidized to Sn⁴⁺ upon air exposure. Here we report the fabrication of air‐stable FASnI₃ solar cells by introducing hydroxybenzene sulfonic acid or its salt as an antioxidant additive into the perovskite precursor solution along with excess SnCl₂. The interaction between the sulfonate group and the Sn²⁺ ion enables the in situ encapsulation of the perovskite grains with a SnCl₂–additive complex layer, which results in greatly enhanced oxidation stability of the perovskite film. The corresponding PSCs are able to maintain 80 % of the efficiency over 500 h upon air exposure without encapsulation, which is over ten times longer than the best result reported previously. Our results suggest a possible strategy for the future design of efficient and stable tin‐based PSCs.     

Observing Defect Passivation of the Grain Boundary with 2-Aminoterephthalic Acid for Efficient and Stable Perovskite Solar Cells

Metal halide perovskite solar cells (PSCs), with their exceptional properties, show promise as photoelectric converters. However, defects in the perovskite layer, particularly at the grain boundaries (GBs), seriously restrict the performance and stability of PSCs. Now, a simple post-treatment procedure involves applying 2-aminoterephthalic acid to the perovskite to produce efficient and stable PSCs. By optimizing the post-treatment conditions, we created a device that achieved a remarkable power conversion efficiency (PCE) of 21.09 % and demonstrated improved stability. This improvement was attributed to the fact that the 2-aminoterephthalic acid acted as a cross-linking agent that inhibited the migration of ions and passivated the trap states at GBs. These findings provide a potential strategy for designing efficient and stable PSCs regarding the aspects of defect passivation and crystal growth.     

Polymer Donors for High‐Performance Non‐Fullerene Organic Solar Cells

Over the past few years, non‐fullerene organic solar cells have been a focus of research and their power conversion efficiencies have been improved dramatically from about 6 % to over 14 %. In addition to innovations in non‐fullerene acceptors, the ongoing development of polymer donors has contributed significantly to the rapid progress of non‐fullerene organic solar cell performance. This Minireview highlights the polymer donors that enable high‐performance non‐fullerene organic solar cells. We show the impressive photovoltaic devices results achieved by some of important classes of conjugated polymer systems in non‐fullerene organic solar cells. We discuss the molecular design strategies as far as developing matching polymer donors for non‐fullerene acceptors. We conclude with a brief summary and outlook for advances in donor polymers required for commercialization.     

Effects of Bithiophene Imide Fusion on the Device Performance of Organic Thin‐Film Transistors and All‐Polymer Solar Cells

Two new bithiophene imide (BTI)‐based n‐type polymers were synthesized. f‐BTI2‐FT based on a fused BTI dimer showed a smaller band gap, a lower LUMO, and higher crystallinity than s‐BTI2‐FT containing a BTI dimer connected through a single bond. s‐BTI2‐FT exhibited a remarkable electron mobility of 0.82 cm² V⁻¹ s⁻¹, and f‐BTI2‐FT showed a further improved mobility of 1.13 cm² V⁻¹ s⁻¹ in transistors. When blended with the polymer donor PTB7‐Th, f‐BTI2‐FT‐based all‐polymer solar cells (all‐PSCs) attained a PCE of 6.85 %, the highest value for an all‐PSC not based on naphthalene (or perylene) diimide polymer acceptors. However, s‐BTI2‐FT all‐PSCs showed nearly no photovoltaic effect. The results demonstrate that f‐BTI2‐FT is one of most promising n‐type polymers and that ring fusion offers an effective approach for designing polymers with improved electrical properties.     

Homogenous Alloys of Formamidinium Lead Triiodide and Cesium Tin Triiodide for Efficient Ideal‐Bandgap Perovskite Solar Cells

The alloying behavior between FAPbI₃ and CsSnI₃ perovskites is studied carefully for the first time, which has led to the realization of single‐phase hybrid perovskites of (FAPbI₃)_1−x (CsSnI₃)_x (0<x <1) compositions with anomalous bandgaps. (FAPbI₃)_1−x (CsSnI₃)_x perovskites exhibit stable, homogenous composition/microstructure at the nanoscale, as confirmed by microscopic characterization. The ideal bandgap of 1.3 eV for single‐junction solar cell operation is achieved in the rationally‐tailored (FAPbI₃)_0.7(CsSnI₃)_0.3‐composition perovskite. Solar cells based on this new perovskite show power conversion efficiency up to 14.6 %.     

Van der Waals Heterostructured MOF‐on‐MOF Thin Films: Cascading Functionality to Realize Advanced Chemiresistive Sensing

Heterostructured metal—organic framework (MOF)‐on‐MOF thin films have the potential to cascade the various properties of different MOF layers in a sequence to produce functions that cannot be achieved by single MOF layers. An integration method that relies on van der Waals interactions, and which overcomes the lattice‐matching limits of reported methods, has been developed. The method deposits molecular sieving Cu‐TCPP (TCPP=5,10,15,20‐tetrakis(4‐carboxyphenyl)porphyrin) layers onto semiconductive Cu‐HHTP (HHTP=2,3,6,7,10,11‐hexahydrotriphenylene) layers to obtain highly oriented MOF‐on‐MOF thin films. For the first time, the properties in different MOF layers were cascaded in sequence to synergistically produce an enhanced device function. Cu‐TCPP‐on‐Cu‐HHTP demonstrated excellent selectivity and the highest response to benzene of the reported recoverable chemiresistive sensing materials that are active at room temperature. This method allows integration of MOFs with cascading properties into advanced functional materials.