An investigation of polyhedral deformation in two mixed‐metal diarsenates: SrZnAs2O7 and BaCuAs2O7

Two isostructural diarsenates, SrZnAs₂O₇ (strontium zinc diarsenate), (I), and BaCuAs₂O₇ [barium copper(II) diarsenate], (II), have been synthesized under hydrothermal conditions and characterized by single‐crystal X‐ray diffraction. The three‐dimensional open‐framework crystal structure consists of corner‐sharing M2O₅ (M2 = Zn or Cu) square pyramids and diarsenate (As₂O₇) groups. Each As₂O₇ group shares its five corners with five different M2O₅ square pyramids. The resulting framework delimits two types of tunnels aligned parallel to the [010] and [100] directions where the large divalent nine‐coordinated M1 (M1 = Sr or Ba) cations are located. The geometrical characteristics of the M1O₉, M2O₅ and As₂O₇ groups of known isostructural diarsenates, adopting the general formula M1^IIM2^IIAs₂O₇ (M1^II = Sr, Ba, Pb; M2^II = Mg, Co, Cu, Zn) and crystallizing in the space group P2₁/n, are presented and discussed.     

Breaking and Making of Carbon–Carbon Bonds by Lanthanides and Third‐Row Transition Metals

Carbon‐atom extrusion from the ipso‐position of a halobenzene ring (C₆H₅X; X=F, Cl, Br, I) and its coupling with a methylene ligand to produce acetylene is not confined to [LaCH₂]⁺; also, the third‐row transition‐metal complexes [MCH₂]⁺, M=Hf, Ta, W, Re, and Os, bring about this unusual transformation. However, substrates with substituents X=CN, NO₂, OCH₃, and CF₃ are either not reactive at all or give rise to different products when reacted with [LaCH₂]⁺. In the thermal gas‐phase processes of atomic Ln⁺ with C₇H₇Cl substrates, only those lanthanides with a promotion energy small enough to attain a 4fⁿ5d¹6s¹ configuration are reactive and form both [LnCl]⁺ and [LnC₅H₅Cl]⁺. Branching ratios and the reaction efficiencies of the various processes seem to correlate with molecular properties, like the bond‐dissociation energies of the C?X or M⁺?X bonds or the promotion energies of lanthanides.     

Synthesis of comb‐type polycarbosilanes via nucleophilic substitution reactions on the main‐chain silicon atoms

A series of comb‐type polycarbosilanes of the type [Si(CH₃)(OR)CH₂]_n {where R = (CH₂)_mR′, R′ = ? O‐p‐biphenyl? X [X = H (m = 3, 6, 8, or 11) or CN (m = 11)], and R′ = (CF₂)₇CF₃ (m = 4)} were prepared from poly(chloromethylsilylenemethylene) by reactions with the respective hydroxy‐terminated side chains in the presence of triethylamine. The product side‐chain polymers were typically greater than 90% substituted and, for R′ = ? O‐p‐biphenyl? X derivatives, they exhibited phase transitions between 27 and 150 °C involving both crystalline and liquid‐crystalline phases. The introduction of the polar p‐CN substituent to the biphenyl mesogen resulted in a substantial increase in both the isotropization temperature and the liquid‐crystalline phase range with respect to the corresponding unsubstituted biphenyl derivative. For R = (CH₂)₁₁? O‐biphenyl side chains, an analogous side‐chain liquid‐crystalline (SCLC) polysiloxane derivative of the type [Si(CH₃)(O(CH₂)₁₁? O‐biphenyl)O]_n was prepared by means of a catalytic dehydrogenation reaction. In contrast to the polycarbosilane bearing the same side chain, this polymer did not exhibit any liquid‐crystalline phases but melted directly from a crystalline phase to an isotropic liquid at 94 °C. Similar behavior was observed for the polycarbosilane with a fluorocarbon chain, for which a single transition from a crystalline phase to an isotropic liquid was observed at ?0.7 °C. The molecular structures of these polymers were characterized by means of gel permeation chromatography and high‐resolution NMR studies, and the crystalline and liquid‐crystalline phases of the SCLC polymers were identified by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 984–997, 2003     

Centimeter‐Sized Single Crystal of Two‐Dimensional Halide Perovskites Incorporating Straight‐Chain Symmetric Diammonium Ion for X‐Ray Detection

Two‐dimensional (2D) AA′_n?1M_nX_3n+1 type halide perovskites incorporating straight‐chain symmetric diammonium cations define a new type of structure, but their optoelectronic properties are largely unexplored. Reported here is the synthesis of a centimeter‐sized AA′_n?1M_nX_3n+1 type perovskite, BDAPbI₄ (BDA=NH₃C₄H₈NH₃), single crystal and its charge‐transport properties under X‐ray excitation. The crystal shows a staggered configuration of the [PbI₆]^4? layers, a band gap of 2.37 eV, and a low trap density of 3.1×10⁹ cm^?3. The single‐crystal X‐ray detector exhibits an excellent sensitivity of 242 μC Gy_air^?1 cm^?2 under the 10 V bias (0.31 V μm^?1), a detection limit as low as 430 nGy_air s^?1, ultrastable response current, a stable baseline with the lowest dark current drift of 6.06×10^?9 nA cm^?1 s^?1 V^?1, and rapid response time of τ_rise=7.3 ms and τ_fall=22.5 ms. These crystals are promising candidates for the next generation of optoelectronic devices.     

Polykationische Hg‐Pnictid‐Gerüste mit einer neuen Füllungsvariante in den Strukturen von Hg3As2TlCl3 und Hg3Sb2TlBr3

Polycationic Hg‐Pnictide Frameworks with a Novel Kind of Filling in the Structures of Hg₃As₂TlCl₃ and Hg₃Sb₂TlBr₃ Hg₃As₂TlCl₃ and Hg₃Sb₂TlBr₃ were prepared from mixtures of Hg₂X₂, HgX₂ (X = Cl, Br), As or Sb and Tl in sealed evacuated glass ampoules in temperature gradients 330 °C → 290 °C for Hg₃As₂TlCl₃ (red, transparent crystals) and 290 °C → 260 °C for Hg₃Sb₂TlBr₃ (black crystals). The structures of the diamagnetic compounds were determined based on single crystal X‐ray diffraction data. Both compounds crystallize isotypically in the orthorhombic space group Pbcm with Z = 4 and the lattice constants a = 629.2(5) pm, b = 1234.1(7) pm and c = 1224.8(9) pm for Hg₃As₂TlCl₃ and a = 661.0(4) pm, b = 1311.2(9) pm and c = 1307.1(2) pm for Hg₃Sb₂TlBr₃. The structures can be described either as a cubic closest packing of As₂/Sb₂ dumb‐bells and halide anions with all octahedral interstices filled with Hg²⁺ and Tl⁺, or as a polycationic framework (Hg₃Y₂)²⁺ (Y = As, Sb) consisting of pnictide‐pnictide dumbbells each connected by six Hg atoms to a three dimensional porous arrangement. The centers of the cavities are occupied by Tl⁺ ions which are coordinated by six halide ions in distorted octahedral form. These TlX₆ octahedra share corners in all directions in the motive of the ReO₃ structure type. This new structure type shows a close relationship to the cubic family of compounds of the general formula (Hg₆Y₄)[MX₆]X (Y = As, Sb; M = Mo, Ti, Bi, Sb; X = Cl, Br). The halide ions are connected to the Hg atoms of the polycationic network and to the Tl⁺ ions. Extended Hueckel calculations were used to explain the bonding character of the thallium–halide and mercury–halide bonds.     

Two novel organic–inorganic hybrid materials from tetrachloridometallate(II) salts and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium

Two organic–inorganic hybrid compounds have been prepared by the combination of the 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium cation with perhalometallate anions to give 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridocobaltate(II), (C₁₂H₁₂N₂)[CoCl₄], (I), and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridozincate(II), (C₁₂H₁₂N₂)[ZnCl₄], (II). The compounds have been structurally characterized by single‐crystal X‐ray diffraction analysis, showing the formation of a three‐dimensional network through X—H...Cl_nM⁻ (X = C, N⁺; n = 1, 2; M = Co^II, Zn^II) hydrogen‐bonding interactions and π–π stacking interactions. The title compounds were also characterized by FT–IR spectroscopy and thermogravimetric analysis (TGA).     

A synchrotron X‐ray study of triclinic LiCa2Nb3O10 with perovskite‐type slabs

The triclinic superstructure of a small crystal of LiCa₂Nb₃O₁₀, lithium dicalcium triniobium decaoxide, has been investigated by synchrotron X‐ray diffraction. The unit cell is an almost rectangular parallelepiped, although there is a 0.245° offset from orthogonality for β. The structure essentially belongs to a homologous series of Li[Na_n?3Ca₂Nb_nO_3n+1] with n = 3, where the moiety in square brackets has a perovskite‐type slab structure. The superstructure has a doubled unit‐cell volume with respect to the tetragonal aristotype. The NbO₆ octahedra are rotated about axes parallel to [110] by approximately 10°. Adjacent slabs are connected by Li atoms and are geo­metrically related by 4₂ pseudosymmetry lying parallel to c . There are twice as many sites as Li atoms, providing a variation of population at these Li sites.     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Insights into Functional‐Group‐Tolerant Polymerization Catalysis with Phosphine–Sulfonamide Palladium(II) Complexes

Two series of cationic palladium(II) methyl complexes {[(2‐MeOC₆H₄)₂PC₆H₄SO₂NHC₆H₃(2,6‐R¹,R²)]PdMe}₂[A]₂ ( ^X 1⁺‐A : R¹=R²=H: ^H 1⁺‐A ; R¹=R²=CH(CH₃)₂: ^DIPP 1⁺‐A ; R¹=H, R²=CF₃: ^CF3 1⁺‐A ; A =BF₄ or SbF₆) and neutral palladium(II) methyl complexes {[(2‐MeOC₆H₄)₂PC₆H₄SO₂NC₆H₃(2,6‐R¹,R²)]PdMe(L)} ( ^X 1‐acetone : L=acetone; ^X 1‐dmso : L=dimethyl sulfoxide; ^X 1‐pyr : L=pyridine) chelated by a phosphine–sulfonamide were synthesized and fully characterized. Stoichiometric insertion of methyl acrylate (MA) into all complexes revealed that a 2,1 regiochemistry dominates in the first insertion of MA. Subsequently, for the cationic complexes ^X 1⁺‐A , β‐H elimination from the 2,1‐insertion product ^X 2⁺‐A_MA‐2,1 is overwhelmingly favored over a second MA insertion to yield two major products ^X 4⁺‐A_MA‐1,2 and ^X 5⁺‐A_MA . By contrast, for the weakly coordinated neutral complexes ^X 1‐acetone and ^X 1‐dmso , a second MA insertion of the 2,1‐insertion product ^X 2_MA‐2,1 is faster than β‐H elimination and gives ^X 3_MA as major products. For the strongly coordinated neutral complexes ^X 1‐pyr , no second MA insertion and no β‐H elimination (except for ^DIPP 2‐pyr_MA‐2,1 ) were observed for the 2,1‐insertion product ^X 2‐pyr_MA‐2,1 . The cationic complexes ^X 1⁺‐A exhibited high catalytic activities for ethylene dimerization, affording butenes (C₄) with a high selectivity of up to 97.7 % (1‐butene: 99.3 %). Differences in activities and selectivities suggest that the phosphine–sulfonamide ligands remain coordinated to the metal center in a bidentate fashion in the catalytically active species. By comparison, the neutral complexes ^X 1‐acetone , ^X 1‐dmso , and ^X 1‐pyr showed very low activity towards ethylene to give traces of oligomers. DFT analyses taking into account the two possible coordination modes (O or N) of the sulfonamide ligand for the cationic system ^CF3 1⁺ suggested that the experimentally observed high activity in ethylene dimerization is the result of a facile first ethylene insertion into the O‐coordinated PdMe isomer and a subsequent favored β‐H elimination from the N‐coordinated isomer formed by isomerization of the insertion product. Steric hindrance by the N‐aryl substituent in the neutral systems ^CF3 1 and ^H 1 appears to contribute significantly to a higher barrier of insertion, which accounts for the experimentally observed low activity towards ethylene oligomerization.     

Controlled ring‐opening homo‐ and copolymerization of ɛ‐caprolactone and d,l‐lactide by iminophenolate aluminum complexes: An efficient approach toward well‐defined macromonomers

The aluminum complexes containing two iminophenolate ligands of the type (p‐XC₆H₄NCHC₆H₄O‐o)₂AlR' (R′=Me ( 3, 4 ) or R′=O(CH₂)₄OCH=CH₂ ( 5, 6 ), X=H ( 3, 5 ), F( 4, 6 )) were synthesized and characterized by ¹H, ¹³C NMR spectroscopy, and X‐ray crystallography. The reaction of AlMe₃ with two equivalents of substituted iminophenols gave five‐coordinated {ONR}₂AlMe ( 3, 4 ) complexes. Subsequent reaction of these methyl complexes with unsaturated alcohol, HO(CH₂)₄OCH=CH₂, resulted in target compounds 5 and 6 in a good yield. It was shown that the complexes ( 3 ‐ 6 ) are monomeric in solution (NMR) and in solid state (X‐ray analysis). The catalytic activity of the complexes 5 and 6 towards ring‐opening polymerization (ROP) of ?‐caprolactone and d,l ‐lactide was assessed. Complex 5 showed higher activity as compared with 6 , while both of these catalysts induced controlled homo‐ and copolymerization to afford the macromonomers with high content of vinyl ether end groups (F_n > 80%) in a broad range of molecular weights (M_n = 4000–30,000 g mol^?1) with relatively narrow MWD (M_w/M_n = 1.1–1.5). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1237–1250     

Microwave‐Assisted Solid‐Phase Synthesis of Antifreeze Glycopeptides

Microwave‐assisted solid‐phase synthesis allows for the rapid and large‐scale preparation and structure–activity characterization of tandem repeating glycopeptides, namely monodispersed synthetic antifreeze glycopeptides (syAFGPs, H‐[Ala‐Thr(Galβ1,3GalNAcα1→)‐Ala]_n‐OH, n=2–6). By employing novel AFGP analogues, we have demonstrated that of the monodispersed syAFGP_n (n=2–6, degree of polymerization, DP=2–6, M_w=1257–3690 Da), syAFGP₅ (DP=5, M_w=3082 Da) and syAFGP₆ (DP=6, M_w=3690 Da) exhibit the ability to form typical hexagonal bipyramidal ice crystals and satisfactory thermal hysteresis activity. Structural characterization by NMR and CD spectroscopy revealed that syAFGP₆ forms a typical poly‐L ‐proline type II helix‐like structure in aqueous solution whereas enzymatic modification by sialic acid of the residues at the C‐3 positions of the nonreducing Gal residues disturbs this conformation and eliminates the antifreeze activity.     

Ionic Transformations in Extremely Nonpolar Fluorous Media: Easily Recoverable Phase‐Transfer Catalysts for Halide‐Substitution Reactions

Solutions of the fluorous alkyl halides R_f8(CH₂)_mX (R_fn=(CF₂)_n?1CF₃; m=2, 3; X=Cl, Br, I) in perfluoromethylcyclohexane or perfluoromethyldecalin are inert towards solid or aqueous NaCl, NaBr, KI, KCN, and NaOAc. However, halide substitution occurs in the presence of fluorous phosphonium salts (R_f8(CH₂)₂)(R_f6(CH₂)₂)₃P⁺X^? (X=I ( 1 ), Br ( 3 )) and (R_f8(CH₂)₂)₄P⁺I^? (10 mol %), which are soluble in the fluorous solvents under the reaction conditions (76–100 °C). Stoichiometric reactions of a) 1 with R_f8(CH₂)₂Br and b) 3 with R_f8(CH₂)₂I were conducted under homogenous conditions in perfluoromethyldecalin at 100 °C and yielded the same R_f8(CH₂)₂I/R_f8(CH₂)₂Br equilibrium ratio (≈60:40). This shows that ionic displacements can take place in extremely nonpolar fluorous phases and suggests a classical phase‐transfer mechanism for the catalyzed reactions. Interestingly, the nonfluorous salt (CH₃(CH₂)₁₁)(CH₃(CH₂)₇)₃P⁺I^? ( 4 ) also catalyzes halide substitutions, but under triphasic conditions with 4 suspended between the lower fluorous and upper aqueous layers. NMR experiments established very low solubilities in both phases, which suggests interfacial catalysis. Catalyst 1 is easily recycled, optimally by simple precipitation onto teflon tape.     

Ion‐Pair SN2 Substitution: Activation Strain Analyses of Counter‐Ion and Solvent Effects

The ion‐pair S_N2 reactions of model systems M_nF^n?1+CH₃Cl (M⁺=Li⁺, Na⁺, K⁺, and MgCl⁺; n=0, 1) have been quantum chemically explored by using DFT at the OLYP/6‐31++G(d,p) level. The purpose of this study is threefold: 1) to elucidate how the counterion M⁺ modifies ion‐pair S_N2 reactivity relative to the parent reaction F^?+CH₃Cl; 2) to determine how this influences stereochemical competition between the backside and frontside attacks; and 3) to examine the effect of solvation on these ion‐pair S_N2 pathways. Trends in reactivity are analyzed and explained by using the activation strain model (ASM) of chemical reactivity. The ASM has been extended to treat reactivity in solution. These findings contribute to a more rational design of tailor‐made substitution reactions.     

Synthesis of poly(glycerol)‐block‐poly(methyl acrylate) multi‐arm star polymers

Novel polyfunctional macroinitiators for atom transfer radical polymerization (ATRP) were obtained via esterification of hyperbranched polyglycerol (PG) (M_n = 4 770 g/mol, M_w/M_n = 1.5) with 2‐bromoisobutyryl bromide. Such macroinitiators were used in the presence of CuBr/pentamethyldiethylenetriamine (PMDETA) to initiate methyl acrylate (MA) polymerization, resulting in multi‐arm block copolymers with polyether core and 45–55 PMA arms. PMA arm length was controlled via monomer/initiator ratio and conversion (< 35%). Polymers were characterized by ¹H NMR, ¹³C NMR, SEC, membrane osmometry and DSC.     

Ion‐Pair SN2 Reaction of OH− and CH3Cl: Activation Strain Analyses of Counterion and Solvent Effects

We have theoretically studied the non‐identity S_N2 reactions of M_nOH^(n?1)+CH₃Cl (M⁺=Li⁺, Na⁺, K⁺, and MgCl⁺; n=0, 1) in the gas phase and in THF solution at the OLYP/6‐31++G(d,p) level using polarizable continuum model (PCM) implicit solvation. We want to explore and understand the effect of the metal counterion M⁺ and solvation on the reaction profile and the stereoselectivity of these processes. To this end, we have explored the potential energy surfaces of the backside (S_N2‐b) and frontside (S_N2‐f) pathways. To explain the computed trends, we have carried out analyses with an extended activation strain model (ASM) of chemical reactivity that includes the treatment of solvation effects.     

Laser ablation synthesis of new gold phosphides using red phosphorus and nanogold as precursors. Laser desorption ionisation time‐of‐flight mass spectrometry

Gold phosphides show unique optical or semiconductor properties and there are extensive high technology applications, e.g. in laser diodes, etc. In spite of the various AuP structures known, the search for new materials is wide. Laser ablation synthesis is a promising screening and synthetic method. Generation of gold phosphides via laser ablation of red phosphorus and nanogold mixtures was studied using laser desorption ionisation time‐of‐flight mass spectrometry (LDI TOFMS). Gold clusters Au_m⁺ (m = 1 to ~35) were observed with a difference of one gold atom and their intensities were in decreasing order with respect to m. For P_n⁺ (n = 2 to ~111) clusters, the intensities of odd‐numbered phosphorus clusters are much higher than those for even‐numbered phosphorus clusters. During ablation of P‐nanogold mixtures, clusters Au_m⁺ (m = 1‐12), P_n⁺ (n = 2‐7, 9, 11, 13–33, 35–95 (odd numbers)), AuP_n⁺ (n = 1, 2–88 (even numbers)), Au₂P_n⁺ (n = 1‐7, 14–16, 21–51 (odd numbers)), Au₃P_n⁺ (n = 1‐6, 8, 9, 14), Au₄P_n⁺ (n = 1‐9, 14–16), Au₅P_n⁺ (n = 1‐6, 14, 16), Au₆P_n⁺ (n = 1‐6), Au₇P_n⁺ (n = 1‐7), Au₈P_n⁺ (n = 1‐6, 8), Au₉P_n⁺ (n = 1‐10), Au₁₀P_n⁺ (n = 1‐8, 15), Au₁₁P_n⁺ (n = 1‐6), and Au₁₂P_n⁺ (n = 1, 2, 4) were detected in positive ion mode. In negative ion mode, Au_m^– (m = 1–5), P_n^– (n = 2, 3, 5–11, 13–19, 21–35, 39, 41, 47, 49, 55 (odd numbers)), AuP_n^– (n = 4–6, 8–26, 30–36 (even numbers), 48), Au₂P_n^– (n = 2–5, 8, 11, 13, 15, 17), Au₃P_n^– (n = 6–11, 32), Au₄P_n^– (n = 1, 2, 4, 6, 10), Au₆P₅^–, and Au₇P₈^– clusters were observed. In both modes, phosphorus‐rich Au_mP_n clusters prevailed. The first experimental evidence for formation of AuP₆₀ and gold‐covered phosphorus Au₁₂P_n (n = 1, 2, 4) clusters is given. The new gold phosphides generated might inspire synthesis of new Au‐P materials with specific properties. Copyright © 2012 John Wiley & Sons, Ltd.     

Silicon‐ and Tin‐Containing Open‐Chain and Eight‐Membered‐Ring Compounds as Bicentric Lewis Acids toward Anions

Herein, we report the syntheses of silicon‐ and tin‐containing open‐chain and eight‐membered‐ring compounds Me₂Si(CH₂SnMe₂X)₂ ( 2 , X=Me; 3 , X=Cl; 4 , X=F), CH₂(SnMe₂CH₂I)₂ ( 7 ), CH₂(SnMe₂CH₂Cl)₂ ( 8 ), cyclo‐Me₂Sn(CH₂SnMe₂CH₂)₂SiMe₂ ( 6 ), cyclo‐(Me₂SnCH₂)₄ ( 9 ), cyclo‐Me_(2?n)X_nSn(CH₂SiMe₂CH₂)₂SnX_nMe_(2?n) ( 5 , n=0; 10 , n = 1, X= Cl; 11 , n=1, X= F; 12 , n=2, X= Cl), and the chloride and fluoride complexes NEt₄[cyclo‐ Me(Cl)Sn(CH₂SiMe₂CH₂)₂Sn(Cl)Me?F] ( 13 ), PPh₄[cyclo‐Me(Cl)Sn(CH₂SiMe₂CH₂)₂Sn(Cl)Me?Cl] ( 14 ), NEt₄[cyclo‐Me(F)Sn(CH₂SiMe₂CH₂)₂Sn(F)Me?F] ( 15 ), [NEt₄]₂[cyclo‐Cl₂Sn(CH₂SiMe₂CH₂)₂SnCl₂?2 Cl] ( 16 ), M[Me₂Si(CH₂Sn(Cl)Me₂)₂?Cl] ( 17 a , M=PPh₄; 17 b , M=NEt₄), NEt₄[Me₂Si(CH₂Sn(Cl)Me₂)₂?F] ( 18 ), NEt₄[Me₂Si(CH₂Sn(F)Me₂)₂?F] ( 19 ), and PPh₄[Me₂Si(CH₂Sn(Cl)Me₂)₂?Br] ( 20 ). The compounds were characterised by electrospray mass‐spectrometric, IR and ¹H, ¹³C, ¹⁹F, ²⁹Si, and ¹¹⁹Sn NMR spectroscopic analysis, and, except for 15 and 18 , single‐crystal X‐ray diffraction studies.     

Fluorescence studies of the self‐organization of a cholesterol‐bearing polymethacrylate in n‐hexane solution

A copolymer of cholesteryl 6‐(methacryloyloxy)hexanoate and a small amount of (1‐pyrenylmethyl) 6‐(methacryloyloxy)hexanoate (Py‐C₅‐MA) was prepared by free radical copolymerization. A copolymer of 1‐eicosanylmethacrylate and a small amount of Py‐C₅‐MA was also prepared as a reference copolymer. A wide‐angle X‐ray diffraction pattern for an n‐hexane solution of the cholesterol(Chol)‐containing copolymer showed a peak corresponding to a spacing of 5.3 Å. In n‐hexane, the hydrodynamic radius (R_h) for the Chol‐containing copolymer (M_w = 7.8 × 10⁴) was 8.1 nm, while that of the eicosanyl‐containing copolymer (M_w = 4.9 × 10⁴) was 9.6 nm, R_h for the former being smaller than that for the latter, although M_w for the former was higher than that of the latter. ¹H‐NMR spectra of the Chol‐containing polymer in n‐hexane‐d₁₄ indicated a strong restriction of local motions of pendant Chol groups. Fluorescence spectra of the Chol‐containing copolymer in n‐hexane indicated that each pyrene group was isolated from others. In n‐hexane/benzene mixed solutions of the Chol‐containing polymer, the ratio of the intensity of the excimer relative to the monomer emission decreased with increasing the ratio of n‐hexane in the mixed solvent. Electron transfer from N,N‐dimethylaniline to singlet‐excited pyrene chromophores was suppressed in the Chol‐containing copolymer in n‐hexane. The pyrene chromophores exhibited a long triplet lifetime in n‐hexane. These observations led us to conclude that Chol groups formed stacks in n‐hexane, and that the pyrene chromophores were trapped in the Chol stacks, leading to the “protection” of pyrene from the bulk phase. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 47–58, 1999     

Syntheses and Crystal Structures of Brominated Polyhedral Arsa‐ and Phosphaboranes

The synthesis of the perbrominated arsaboranes closo‐1,2‐As₂B₄Br₄ ( 1 ) and closo‐1,2‐As₂B₁₀Br₁₀ ( 2 ) occurs by co‐pyrolysis of B₂Br₄ and AsBr₃ at 500 °C. Repeated fractionation of the sublimable products in vacuo yields both compounds in pure form. The X‐ray structure determination for orthorhombic closo‐1,2‐As₂B₄Br₄ ( 1 ) [space group: Pbcn, a = 2345.48(17) pm, b = 627.31(4) pm, c = 1294.02(9) pm for Z = 8] and the corresponding phosphorus compound, monoclinic closo‐1,2‐P₂B₄Br₄ ( 3 ) [space group: P2₁/n, a = 806.84(6) pm, b = 1247.96(9) pm, c = 974.91(7) pm, β = 90.493(3)° and Z = 4] confirmed that both 1 and 3 , consistent with their 14‐skeletal electron counts, adopt octahedral structures distorted from regular by two arsenic or phosphorus atoms in the 1,2‐positions. The shortest boron–boron bonds within the cluster frameworks are located between the boron atoms antipodal to the heteroatoms.     

Glycoconjugated polymer: Synthesis and characterization of poly(vinyl saccharide)‐block‐polystyrene‐block‐poly(vinyl saccharide) as an amphiphilic ABA triblock copolymer

Styrene (St) was polymerized with α,α′‐bis(2′,2′,6′,6′‐tetramethyl‐1′‐piperidinyloxy)‐1,4‐diethylbenzene ( 1 ) as an initiator (bulk, [St]/] 1 ] = 570) at 120 °C for 5.0 h to obtain polystyrene having 2,2,6,6‐tetramethylpiperidiloxy moieties on both sides of the chain ends ( 2 ) with a number‐average molecular weight (M_n) of 14,300 and a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.14. 4‐Vinylbenzyl glucoside peracetate ( 3a ) was polymerized with 2 as a macromolecular initiator and dicumyl peroxide (DCP) as an accelerator in chlorobenzene at 120 °C. The polymerization with the [ 3a ]/[ 2 ]/[DCP] ratio of 30/1/1.2 for 5 h afforded a product in a yield of 73%; it was followed by purification with preparative size exclusion chromatography to provide the ABA triblock copolymer containing the pendant acetyl glucose on both sides of the chain ends ( 4a ; M_n = 21,000, M_w/M_n = 1.16). Similarly, the polymerization of 4‐vinylbenzyl maltohexaoside peracetate produced the ABA triblock copolymer containing the pendant acetyl maltohexaose on both side of the chain end ( 4b ; M_n = 31,800, M_w/M_n = 1.11). Polymers 4a and 4b were modified by deacetylation into amphiphilic ABA triblock copolymers containing the pendant glucose and maltohexaose as hydrophilic segment, 5a and 5b , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3978–3985, 2006