New Transformation of 1,3‐Oxathiolane‐2‐thione into 1,3‐Dithiolan‐2‐one via Polymerization and Depolymerization

This article deals with the cationic and anionic depolymerization of polydithiocarbonate, which was synthesized by cationic polymerization of 5‐phenoxymethyl‐1,3‐oxathiolane‐2‐thione ( 1 ) using methyl triflate as the initiator. The cationic depolymerization of the obtained polymer was carried out in the presence of 5–20 mol‐% of methyl triflate or triflic acid catalyst in chlorobenzene at 60 °C for 96 h to afford 4‐phenoxymethyl‐1,3‐dithiolan‐2‐one ( 2 ) in 35–83% yield. The anionic depolymerization of the polymer was carried out in the presence of 5 mol‐% of triethylamine or potassium tert‐butoxide at 20 °C for 24 h to afford 2 in 85–100% yield.     

Direct through anionic,cationic, and radical active species: Terminal carbon–halogen bond for “controlled”/living polymerizations of styrene

In this work, we examined the synthesis of novel block (co)polymers by mechanistic transformation through anionic, cationic, and radical living polymerizations using terminal carbon–halogen bond as the dormant species. First, the direct halogenation of growing species in the living anionic polymerization of styrene was examined with CCl₄ to form a carbon–halogen terminal, which can be employed as the dormant species for either living cationic or radical polymerization. The mechanistic transformation was then performed from living anionic polymerization into living cationic or radical polymerization using the obtained polymers as the macroinitiator with the SnCl₄/n‐Bu₄NCl or RuCp^*Cl(PPh₃)/Et₃N initiating system, respectively. Finally, the combination of all the polymerizations allowed the synthesis block copolymers including unprecedented gradient block copolymers composed of styrene and p‐methylstyrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 465–473     

Influence of Amine‐Based Cationic Gemini Surfactants on Catalytic Activity of α‐Chymotrypsin

The α‐chymotrypsin activity was tested in aqueous media with the presence of novel cationic amine–based gemini surfactant, with different spacer chain lengths and head group size, and also compared with the cationic cetyltrimethylammonium bromide (CTAB) and cetyltriphenylphosphonium bromide (CTPB) surfactants and aqueous buffer only. The p‐nitrophenyl acetate (PNPA) hydrolysis rate was monitored in the presence of the surfactant concentration at 30°C. Most of these gemini surfactants gave higher catalytic activity as compared to cationic CTAB and CTPB. The highest superactivity was measured in the presence of gemini 16‐12‐16, [dodecanediyl‐1,12‐bis(cetyldimethylammonium bromide)] surfactant at pH 7.5. The catalytic reaction follows the Michaelis–Menten mechanism. The catalytic rate constants, k_cat, show the same profile that the catalytic affinity; K_M being enhanced with increasing space chain length. The results are favorable for considering that the amine‐based gemini surfactant influences more than both the aqueous and cationic micellar media.     

Aqueous solution behavior of comb‐shaped poly(2‐ethyl‐2‐oxazoline)

A series of comb polymers consisting of a methacrylate backbone and poly(2‐ethyl‐2‐oxazoline) (PEtOx) side chains was synthesized by a combination of cationic ring‐opening polymerization and reversible addition–fragmentation chain transfer polymerization. Small‐angle neutron scattering (SANS) studies revealed a transition from an ellipsoidal to a cylindrical conformation in D₂O around a backbone degree of polymerization of 30. Comb‐shaped PEtOx has lowered T_g values but a similar elution behavior in liquid chromatography under critical conditions in comparison to its linear analog was observed. The lower critical solution temperature behavior of the polymers was investigated by turbidimetry, dynamic light scattering, transmission electron microscopy, and SANS revealing decreasing T_cp in aqueous solution with increasing molar mass, the presence of very few aggregated structures below T_cp, a contraction of the macromolecules at temperatures 5 °C above T_cp but no severe conformational change of the cylindrical structure. In addition, the phase diagram including cloud point and coexistence curve was developed showing an LCST of 75 °C of the binary mixture poly[oligo(2‐ethyl‐2‐oxazoline)methacrylate]/water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Isolated BMI+ Cations are More than Isolated PF6− Anions in the Room Temperature 1‐Butyl‐3‐Methylimidazolium Hexafluorophosphate (BMI‐PF6) Ionic Liquid

Assuming various ionic states in ionic liquids (ILs) are in equilibrium with exchange rates too high to be distinguished by NMR experiments and the overall response of measured diffusivity is viewed as the sum of weighted responses of diffusivity of all possible components, the ratio of cation diffusivity to anion diffusivity, D⁺/D^?, in a specified IL affords the physical meaning: relative association degrees observed by anion‐containing components to cation‐containing components. These values decrease with increasing temperature showing the equilibrium between ionic states shifting to smaller components. In the neat 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMI‐PF₆), (BMI‐PF₆)_nPF₆^? anions are found preferred to (BMI‐PF₆)_nBMI⁺ cations and this phenomenon is termed as hyper anion preference (HAP). The counterpart statement, “isolated BMI⁺Cations Are More than Isolated PF₆^? Anions in the Room Temperature in the BMI‐PF₆ Ionic Liquid” is employed as the research title. The HAP approach can be employed to explain the temperature‐dependent values of D⁺/D^? obtained for BMI‐PF₆/2,2,2‐trifluoroethane (TFE) mixtures at two different compositions (χ_TFE = 0.65 and 0.80). More significantly, this argument can rationalize numerous physical properties published for this IL: (1) higher sensitive of anionic diffusivity towards temperatures than cationic diffusivity, (2) temperature‐dependent cationic transference number, (3) low anionic donicity and high ionicity and (4) high viscosity.     

Cationic Reverse Micelles Create Water with Super Hydrogen‐Bond‐Donor Capacity for Enzymatic Catalysis: Hydrolysis of 2‐Naphthyl Acetate by α‐Chymotrypsin

Reverse micelles (RMs) are very good nanoreactors because they can create a unique microenvironment for carrying out a variety of chemical and biochemical reactions. The aim of the present work is to determine the influence of different RM interfaces on the hydrolysis of 2‐naphthyl acetate (2‐NA) by α‐chymotrypsin (α‐CT). The reaction was studied in water/benzyl‐n‐hexadecyldimethylammonium chloride (BHDC)/benzene RMs and, its efficiency compared with that observed in pure water and in sodium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT) RMs. Thus, the hydrolysis rates of 2‐NA catalyzed by α‐CT were determined by spectroscopic measurements. In addition, the method used allows the joint evaluation of the substrate partition constant K_p between the organic and the micellar pseudophase and the kinetic parameters: catalytic rate constant k_cat, and the Michaelis constant K_M of the enzymatic reaction. The effect of the surfactant concentration on the kinetics parameters was determined at constant W₀=[H₂O]/[surfactant], and the variation of W₀ with surfactant constant concentration was investigated. The results show that the classical Michaelis–Menten mechanism is valid for α‐CT in all of the RMs systems studied and that the reaction takes place at both RM interfaces. Moreover, the catalytic efficiency values k_cat/K_M obtained in the RMs systems are higher than that reported in water. Furthermore, there is a remarkable increase in α‐CT efficiency in the cationic RMs in comparison with the anionic system, presumably due to the unique water properties found in these confined media. The results show that in cationic RMs the hydrogen‐bond donor capacity of water is enhanced due to its interaction with the cationic interface. Hence, entrapped water can be converted into “super‐water” for the enzymatic reaction studied in this work.     

Synthesis and characterization of model polybutadiene‐1,4‐b‐polydimethylsiloxane‐b‐polybutadiene‐1,4 copolymers

Model copolymers of poly(butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS‐b‐PB, were synthesized by sequential anionic polymerization (high vacuum techniques) of 1,3‐butadiene and hexamethylciclotrisiloxane (D₃) on sec‐BuLi followed by chlorosilane‐coupling chemistry. The synthesized copolymers were characterized by nuclear magnetic resonance (¹H NMR), size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). SEC and ¹H NMR results showed low polydispersity indexes (M_w/M_n) and variable siloxane compositions, whereas DSC and TGA experiments indicated that the thermal stability of the triblock copolymers depends on the PDMS composition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2726–2733, 2007     

Synthesis of poly(dimethylsiloxane)‐containing diblock and triblock copolymers by the combination of anionic ring‐opening polymerization of hexamethylcyclotrisiloxane and nitroxide‐mediated radical polymerization of methyl acrylate,isoprene, and styrene

Poly(dimethylsiloxane)‐containing diblock and triblock copolymers were prepared by the combination of anionic ring‐opening polymerization (AROP) of hexamethylcyclotrisiloxane (D₃) and nitroxide‐mediated radical polymerization (NMRP) of methyl acrylate (MA), isoprene (IP), and styrene (St). The first step was the preparation of a TIPNO‐based alkoxyamine carrying a 4‐bromophenyl group. The alkoxyamine was then treated with Li powder in ether, and AROP of D₃ was carried out using the resulting lithiophenyl alkoxyamine at room temperature, giving functional poly(D₃) with M_w/M_n of 1.09–1.16. NMRPs of MA, St, and IP from the poly(D₃) at 120 °C gave poly(D₃‐b‐MA), poly(D₃‐b‐St), and poly(D₃‐b‐IP) diblock copolymers, and subsequent NMRPs of St from poly(D₃‐b‐MA) and poly(D₃‐b‐IP) at 120 °C gave poly(D₃‐b‐MA‐b‐St) and poly(D₃‐b‐IP‐b‐St) triblock copolymers. The poly(dimethylsiloxane)‐containing diblock and triblock copolymers were analyzed by ¹H NMR and size exclusion chromatography. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6153–6165, 2005     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

Initiator effect on the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline

The aim of this research was to study the effect of the initiator on the resulting monomer distribution for the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐phenyl‐2‐oxazoline (PhOx). At first, kinetic studies were performed for the homopolymerizations of both monomers at 160 °C under microwave irradiation using four initiators. These initiators have the same benzyl‐initiating group but different leaving groups, Cl^?, Br^?, I^?, and OTs^?. The basicity of the leaving group affects the ratio of covalent and cationic propagating species and, thus, the polymerization rate. The observed differences in polymerization rates could be correlated to the concentration of cationic species in the polymerization mixture as determined by ¹H NMR spectroscopy. In a next‐step, polymerization kinetics were determined for the copolymerizations of EtOx and PhOx with these four initiators. The reactivity ratios for these copolymerizations were calculated from the polymerization rates obtained for the copolymerizations. This approach allows more accurate determination of the copolymerization parameters compared to conventional methods using the composition of single polymers. When benzyl chloride (BCl) was used as an initiator, no copolymers could be obtained because its reactivity is too low for the polymerization of PhOx. With decreasing basicity of the used counterions (Br^? > I^? > OTs^?), the reactivity ratios gradually changed from r_EtOx = 10.1 and r_PhOx = 0.30 to r_EtOx = 7.9 and r_PhOx = 0.18. However, the large difference in reactivity ratios will lead to the formation of quasi‐diblock copolymers in all cases. In conclusion, the used initiator does influence the monomer distribution in the copolymers, but for the investigated system the differences were so small that no difference in the resulting polymer properties is expected. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4804–4816, 2008     

Anion Recognition with Hydrogen‐Bonding Cyclodiphosphazanes

Modular cyclodiphosph(V)azanes are synthesised and their affinity for chloride and actetate anions were compared to those of a bisaryl urea derivative ( 1 ). The diamidocyclodiphosph(V)azanes cis‐[{ArNHP(O)(μ‐tBu)}₂] [Ar=Ph ( 2 ) and Ar=m‐(CF₃)₂Ph ( 3 )] were synthesised by reaction of [{ClP(μ‐NtBu)}₂] ( 4 ) with the respective anilines and subsequent oxidation with H₂O₂. Phosphazanes 2 and 3 were obtained as the cis isomers and were characterised by multinuclear NMR spectroscopy, FTIR spectroscopy, HRMS and single‐crystal X‐ray diffraction. The cyclodiphosphazanes 2 and 3 readily co‐crystallise with donor solvents such as MeOH, EtOH and DMSO through bidentate hydrogen bonding, as shown in the X‐ray analyses. Cyclodiphosphazane 3 showed a remarkably high affinity (log[K]=5.42) for chloride compared with the bisaryl urea derivative 1 (log[K]=4.25). The affinities for acetate (AcO^?) are in the same range ( 3 : log[K]=6.72, 1 : log[K]=6.91). Cyclodiphosphazane 2 , which does not contain CF₃ groups, exhibits weaker binding to chloride (log[K]=3.95) and acetate (log[K]=4.49). DFT computations and X‐ray analyses indicate that a squaramide‐like hydrogen‐bond directionality and C_α?H interactions account for the efficiency of 3 as an anion receptor. The C_α?H groups stabilise the Z,Z‐ 3 conformation, which is necessary for bidentate hydrogen bonding, as well as coordinating with the anion.     

NIR‐Absorbing Donor–Acceptor Based 1,1,4,4‐Tetracyanobuta‐1,3‐Diene (TCBD)‐ and Cyclohexa‐2,5‐Diene‐1,4‐Ylidene‐Expanded TCBD‐Substituted Ferrocenyl Phenothiazines

A series of unsymmetrical (D‐A‐D₁, D₁‐π‐D‐A‐D₁, and D₁‐A₁‐D‐A₂‐D₁; A=acceptor, D=donor) and symmetrical (D₁‐A‐D‐A‐D₁) phenothiazines ( 4 b , 4 c , 4 c′ , 5 b , 5 c , 5 d , 5 d′ , 5 e , 5 e′ , 5 f , and 5 f′ ) were designed and synthesized by a [2+2] cycloaddition–electrocyclic ring‐opening reaction of ferrocenyl‐substituted phenothiazines with tetracyanoethylene (TCNE) and 7,7,8,8‐tetracyanoquinodimethane (TCNQ). The photophysical, electrochemical, and computational studies show a strong charge‐transfer (CT) interaction in the phenothiazine derivatives that can be tuned by varying the number of TCNE/TCNQ acceptors. Phenothiazines 4 b , 4 c , 4 c′ , 5 b , 5 c , 5 d , 5 d′ , 5 e , 5 e′ , 5 f and 5 f′ show redshifted absorption in the λ =400 to 900 nm region, as a result of a low HOMO–LUMO gap, which is supported by TD‐DFT calculations. The electrochemical study exhibits reduction waves at low potential due to strong 1,1,4,4‐tetracyanobuta‐1,3‐diene (TCBD) and cyclohexa‐2,5‐diene‐1,4‐ylidene‐expanded TCBD acceptors. The incorporation of cyclohexa‐2,5‐diene‐1,4‐ylidene‐expanded TCBD stabilized the LUMO energy level to a greater extent than TCBD.     

Fluorescence Sensing and Selective Binding of a Novel 4,4′‐Sulfonyldianiline‐Bridged Bis(β‐cyclodextrin) for Bile Salts

A novel 4,4′‐sulfonyldianiline‐bridged bis(β‐cyclodextrin (CD)) 2 was synthesized, and its complex stability constants (K_s) for the 1 : 1 inclusion complexation with bile salts, i.e., cholate (CA), deoxycholate (DCA), glycocholate (GCA), and taurocholate (TCA) have been determined in phosphate buffer (pH 7.2) at 25° by fluorescence spectroscopy. The result indicated that 2 can act as efficient fluorescent sensor and display remarkable fluorescence enhancement upon addition of optically inert bile salts. Structures of the inclusion complexes between bile salts and 2 were elucidated by 2D‐NMR experiments, indicating that the anionic tail group and the D ring of bile salts penetrate into one CD cavity of 2 from the wide opening deeply, while the phenyl moiety of the CD linker is partially self‐included in the other CD cavity to form a host–linker–guest binding mode. As compared with native β‐CD 1 upon complexation with bile salts, bis(β‐CD) 2 enhances the binding ability and molecular selectivity. Typically, 2 gives the highest K_s value of 26200 M ^?1 for the complexation with CA, which may be ascribed to the simultaneous contributions of hydrophobic, H‐bond, and electrostatic interactions. These phenomena are discussed from the viewpoints of multiple recognition and induce‐fit interactions between host and guest.     

Copolymerization of poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) with designed molecular structure by a solid‐state polymerization method

Poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) (PVA‐g‐PPDO) with designed molecular structure was synthesized by a solid‐state polymerization. The solid‐state copolymerization was preceded by a graft copolymerization of PDO initiated with PVA as a multifunctional initiator, and Sn (Oct)₂ as a coininitiator/catalyst in a homogeneous molten state. The polymerization temperature was then decreased and the copolymerization was carried out in a solid state. The products prepared by solid‐state polymerization were characterized by ¹H NMR and DSC, and were compared with those synthesized in the homogeneous molten state. The degree of polymerization (D_p), degree of substitution (D_s), yield and the average molecular weight of the graft copolymer with different molecular structure were calculated from the ¹H NMR spectra. The results show that the crystallization process during the solid‐state polymerization may suppress the undesirable inter‐ or intramolecular side reactions, then resulting in a controlled molecular structure of PVA‐g‐PPDO. The results of DSC measurement show that the molecular structures determine the thermal behavior of the PVA‐g‐PPDO. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3083–3091, 2006     

Cationic polymerization of seven‐membered cyclic monothiocarbonate 1,3‐dioxepan‐2‐thione

The cationic ring‐opening polymerization of a seven‐membered cyclic monothiocarbonate, 1,3‐dioxepan‐2‐thione, produced a soluble polymer through the selective isomerization of thiocarbonyl to a carbonyl group {? [SC(C?O)O(CH₂)₄]_n? }. The molecular weights of the polymer could be controlled by the feed ratio of the monomer to the initiators or the conversion of the monomer during the polymerization, although some termination reactions occurred after the complete consumption of the monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1014–1018, 2005     

Controlled Cationic Polymerization of 1‐Methoxy‐1,3‐Butadiene: Long‐Lived Species‐Mediated Reaction and Control over Microstructure with Weak Lewis Bases

Controlled cationic polymerization of trans‐1‐methoxy‐1,3‐butadiene was achieved through the design of appropriate initiating systems, yielding soluble polymers with controllable molecular weights. The combined use of SnCl₄ or GaCl₃ as a Lewis acid catalyst and a weak Lewis base in conjunction with HCl as a protonogen resulted in efficient and controlled polymerization. The M_n values of the product polymers increased linearly along the theoretical line, which indicates that intermolecular crosslinking reactions negligibly occurred. In addition, the polymer microstructure was critically dependent on the weak Lewis base employed. In particular, the use of tetrahydrofuran as an additive resulted in the highest 4,1/4,3‐structure ratio (96/4). Weak Lewis bases also affected the polymerization rates but exhibited unique trends that differed from their effects on the cationic polymerization of alkyl vinyl ethers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 288–296     

Cationic polymerization behavior of isobutyl vinyl ether with arenesulfonates as non‐salt‐type latent thermal initiators

Substituted and unsubstituted benzenesulfonic acid cyclohexyl esters (1–7) were synthesized, and their possibility as latent thermal initiators in the cationic polymerization of isobutyl vinyl ether (IBVE) was examined to develop novel non‐salt type latent cationic initiators. Thermal decomposition of cyclohexyl p‐nitrobenzenesulfonate (2) in C₆D₆ at 80°C proceeded to exclusively afford cyclohexene as well as p‐nitrobenzenesulfonic acid. Cationic polymerization of IBVE with 1 mol % of an arenesulfonate (1–6) in bulk was carried out at 40–100°C for 12 h. No polymerization took place below 50°C, while the consumption of IBVE depending on both the polymerization temperature and the structure of the arenesulfonates was observed above 60°C. The obtained polyIBVEs showed bimodal GPC curves in several cases, revealing the intervention of two independent propagation species in the polymerization. The cationic polymerization of IBVE with cyclohexyl 2,4,6‐triisopropylbenzenesulfonate (7) at 80°C confirmed the acceleration effect of bulkiness on the polymerization rate. It was concluded that the polymerization was largely dependent on both electronic and steric factors of the aryl groups of the initiators which were directly related to the stability of the sulfonate anions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 293–301, 1999     

Cationic photopolymerization of cis‐2,3‐tetramethylene‐1,4,6‐trioxaspiro[4,4]nonane

The spiro‐orthoester, cis‐2,3‐tetramethylene‐1,4,6‐trioxaspiro[4,4]nonane (cis‐TTN) ( I ), underwent rapid cationic photopolymerization when exposed to UV light using diphenyliodonium salts as a photoinitiator. The polymer, poly[(trans‐OCB)_x′‐(cis‐OCB)_x″‐(CHO)_y] thus formed consisted of poly(trans‐2‐oxycyclohexyl butanoate) (trans‐OCB)_x′ ( II ), poly(cis‐2‐oxycyclohexyl butanoate) (cis‐OCB)_x″ ( III ), and poly‐ (1,2‐cyclohexene oxide) (CHO)_y segments, and no expected pure poly(ether‐ester), that is, poly(2‐oxycyclohexyl butanoate), was isolated. The structure of the polymer was identified, and the mechanism of the reaction was deduced. The polymer thus formed exhibited expansion in volume during cationic photopolymerization when compared to that obtained by conventional cationic polymerization using a Lewis acid (e.g., BF₃OEt₂, CH₃OSO₂CF₃, or SnCl₄) as an initiator, which demonstrated volume shrinkage during polymerization. The volume expansion of the polymer during polymerization was due to (1) the lower content of the higher density (CHO)_y segment in the polymer chain and, more importantly, (2) the higher and optimal mole ratio of (trans‐OCB)_x′ and (cis‐OCB)_x″ segments that led the polymer in a more disordered, less dense, and higher volumetric state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3680–3690, 2009     

Synthesis and characterization of well‐defined [polystyrene‐b‐poly(2‐vinylpyridine)]n star‐block copolymers with poly(2‐vinylpyridine) corona blocks

This article describes the synthesis and characterization of [polystyrene‐b‐poly(2‐vinylpyridine)]_n star‐block copolymers with the poly(2‐vinylpyridine) blocks at the periphery. A two‐step living anionic polymerization method was used. Firstly, oligo(styryl)lithium grafted poly(divinylbenzene) cores were used as multifunctional initiators to initiate living anionic polymerization of styrene in benzene at room temperature. Secondly, vinylpyridine was polymerized at the periphery of these living (polystyrene)_n stars in tetrahydrofuran at ?78 °C. The resulting copolymers were characterized using size exclusion chromatography, multiangle laser light scattering, ¹H NMR, elemental analysis, and intrinsic viscosity measurements. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3949–3955, 2007     

Influence of acid‐base dissociation equilibria during electromembrane extraction

Electromembrane extraction is affected by acid–base equilibria of the extracted substances as well as coupled equilibria associated with the partitioning of neutral substances to the supported liquid membrane. A theoretical model for this was developed and verified experimentally in the current work using pure 2‐nitrophenyl octyl ether as supported liquid membrane. From this model, extraction efficiency as a function of pH can be predicted. Substances with log P < 0–2 are generally extracted with low efficiency. Substances with log P > 2 are generally extracted with high efficiency when acceptor pH < pK_aH ? log P. Twelve basic drug substances (2.07 < log P < 6.57 and 6.03 < pK_aH < 10.47) were extracted under different pH conditions with 2‐nitrophenyl octyl ether as supported liquid membrane and fitted to the model. Seven of the drug substances behaved according to the model, while those with log P close to 2.0 deviated from prediction. The deviation was most probably caused by deprotonation and ion pairing within the supporting liquid membrane. Measured partition coefficients (log P) between 2‐nitrophenyl octyl ether and water, were similar to traditional log P values between n‐octanol and water. Thus, the latter have potential for pK_aH ? log P predictions.