Controllable Synthesis of Hexagonal WO3 Nanoplates for Efficient Visible‐Light‐Driven Photocatalytic Oxygen Production

Facilitating charge‐carrier separation and transfer is fundamentally important to improve the photocatalytic performance of semiconductor materials. Herein, two‐dimensional hexagonal WO₃ nanoplates were synthesized by a two‐step route: rapid evaporation and solid‐phase sintering. The as‐prepared WO₃ exhibits an enhanced activity of photocatalytic water oxidation compared to bulk monoclinic WO₃. The electron dynamics analysis reveals that a more efficient charge‐carrier separation in the former can be obtained, the origin of which can be attributed to an increased number of surface defects in hexagonal WO₃ nanoplates. This work not only presents a novel and simple method to produce two‐dimensional hexagonal WO₃ nanoplates, but also demonstrates that surface defects and two‐dimensional geometric structures can promote the charge separation, which may be extended to the design of other efficient photocatalysts.     

A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

A Multiple Structure‐Design Strategy towards Ultrathin Niobate Perovskite Nanosheets with Thickness‐Dependent Photocatalytic Hydrogen‐Evolution Performance

Hydrogen production by catalytic water splitting using sunlight holds great promise for clean and sustainable energy source. Despite the efforts made in the past decades, challenges still exist in pursuing solid catalysts with light‐harvesting capacity, large surface areas and efficient utilities of the photogenerated carrier, at the same time. Here, a multiple structure design strategy leading to highly enhanced photocatalytic performance on hydrogen production from water splitting in Dion–Jacobson perovskites KCa₂Na_{n ‐3}Nb_n O_{3n +1} is described. Specifically, chemical doping (N/Nb⁴⁺) of the parent oxides via ammoniation improved the ability of sunlight harvesting efficiently; subsequent liquid exfoliation of the doped perovskites yielded ultrathin [Ca₂Na_{n ‐3}Nb_n O_{3n +1}]⁻ nanosheets with greatly increased surface areas. Significantly, the maximum hydrogen evolution appears in the n =4 nanosheets, which suggests the most favorable thickness for charge separation in such perovskite‐type catalysts. The optimized black N/Nb⁴⁺‐[Ca₂NaNb₄O₁₃]⁻ nanosheets show greatly enhanced photocatalytic performance, as high as 973 μmol h⁻¹ with Pt loading, on hydrogen evolution from water splitting. As a proof‐of‐concept, this work highlights the feasibility of combining various chemical strategies towards better catalysts and precise thickness control of two‐dimensional materials.     

Au/La2Ti2O7 Nanostructures Sensitized with Black Phosphorus for Plasmon‐Enhanced Photocatalytic Hydrogen Production in Visible and Near‐Infrared Light

Efficient utilization of solar energy is a high‐priority target and the search for suitable materials as photocatalysts that not only can harvest the broad wavelength of solar light, from UV to near‐infrared (NIR) region, but also can achieve high and efficient solar‐to‐hydrogen conversion is one of the most challenging missions. Herein, using Au/La₂Ti₂O₇ (BP‐Au/LTO) sensitized with black phosphorus (BP), a broadband solar response photocatalyst was designed and used as efficient photocatalyst for H₂ production. The optimum H₂ production rates of BP‐Au/LTO were about 0.74 and 0.30 mmol g⁻¹ h⁻¹ at wavelengths longer than 420 nm and 780 nm, respectively. The broad absorption of BP and plasmonic Au contribute to the enhanced photocatalytic activity in the visible and NIR light regions. Time‐resolved diffuse reflectance spectroscopy revealed efficient interfacial electron transfer from excited BP and Au to LTO which is in accordance with the observed high photoactivities.     

Production of Hydrogen by Glycerol Photoreforming Using Binary Nitrogen–Metal‐Promoted N‐M‐TiO2 Photocatalysts

The need for renewable energy focuses attention on hydrogen obtained by using sustainable and green methods. The sustainable compound glycerol can be used for hydrogen production by heterogeneous photocatalysis. A novel approach involves the promotion of the TiO₂ photocatalyst with a binary combination of nitrogen and transition metal. We report the synthesis and spectroscopic characterization of the new N‐M‐TiO₂ photocatalysts (M=none, Cr, Co, Ni, Cu), and the photocatalytic reforming of glycerol to hydrogen under ambient conditions and near‐UV or visible light versus benchmark P25 TiO₂. In units of activity μmol m^?2 h^?1, N‐Ni‐TiO₂ is five‐fold more active than P25, and N‐Cu‐TiO₂ is 44‐fold more active. The photocatalytic activity of N‐M‐TiO₂ increases from Cr to Co and Ni, whereas the photoluminescence decreases; the change in activity is due to the modulation of charge recombination.     

Cost‐Efficient Graphitic Carbon Nitride as an Effective Photocatalyst for Antibiotic Degradation: An Insight into the Effects of Different Precursors and Coexisting Ions,and Photocatalytic Mechanism

In this study, the photocatalytic activity of graphitic carbon nitride (g‐C₃N₄) synthesized via different precursors (urea, thiourea, and dicyandiamide) is investigated in the degradation process of tetracycline. Owing to the efficient charge separation and transfer, prolonged radiative lifetime of charge, large surface area, and nanosheet morphology, the urea‐derived g‐C₃N₄ exhibits superior photocatalytic activity for tetracycline degradation under visible‐light irradiation. This performance can compare with that of most reported g‐C₃N₄‐based composite photocatalysts. Through the time‐circle degradation experiment, the urea‐derived g‐C₃N₄ is found to have an excellent photocatalytic stability. The presence of NO₃^?, CH₃COO^?, Cl^? and SO₄^2? ions with the concentration of 10 mm inhibits the photocatalytic activity of urea‐derived g‐C₃N₄, where this inhibitory effect is more obvious for Cl^? and SO₄^2? ions. For the coexisting Cu²⁺, Ca²⁺, and Zn²⁺ ions, the Cu²⁺ ion exhibits a significantly higher inhibitory effect than Ca²⁺ and Zn²⁺ ions for tetracycline degradation. However, both the inhibitory and facilitating effects are observed in the presence of Fe³⁺ ion with different concentration. The h⁺, ^.OH and ^.O₂^? radicals are confirmed as major oxidation species and a possible photocatalytic mechanism is proposed in a urea‐derived g‐C₃N₄ reaction system. This study is of important significance to promote the large‐scale application of g‐C₃N₄ photocatalysts in antibiotic wastewater purification.     

One‐pot Synthesis of CdS Nanocrystals Hybridized with Single‐Layer Transition‐Metal Dichalcogenide Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Exploration of low‐cost and earth‐abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition‐metal dichalcogenides (TMDs) showed outstanding performance as co‐catalysts for the hydrogen evolution reaction (HER), designing TMD‐hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one‐pot wet‐chemical method is developed to prepare MS₂–CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single‐layer MS₂ nanosheets with lateral size of 4–10 nm selectively grow on the Cd‐rich (0001) surface of wurtzite CdS nanocrystals. These MS₂–CdS nanohybrids possess a large number of edge sites in the MS₂ layers, which are active sites for the HER. The photocatalytic performances of WS₂–CdS and MoS₂–CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS₂–CdS nanohybrids showed enhanced stability after a long‐time test (16 h), and 70 % of catalytic activity still remained.     

Visible‐Light‐Induced Photoredox Catalysis with a Tetracerium‐Containing Silicotungstate

The development of visible‐light‐induced photocatalysts for chemoselective functional group transformations has received considerable attention. Polyoxometalates (POMs) are potential materials for efficient photocatalysts because their properties can be precisely tuned by changing their constituent elements and structures and by the introduction of additional metal cations. Furthermore, they are thermally and oxidatively more stable than the frequently utilized organometallic complexes. The visible‐light‐responsive tetranuclear cerium(III)‐containing silicotungstate TBA₆[{Ce(H₂O)}₂{Ce(CH₃CN)}₂(μ₄‐O)(γ‐SiW₁₀O₃₆)₂] (CePOM; TBA=tetra‐n‐butylammonium) has now been synthesized; when CePOM was irradiated with visible light (λ>400 nm), a unique intramolecular Ce^III‐to‐POM(W^VI) charge transfer was observed. With CePOM, the photocatalytic oxidative dehydrogenation of primary and secondary amines as well as the α‐cyanation of tertiary amines smoothly proceeded in the presence of O₂ (1 atm) as the sole oxidant.     

Highly Dispersed and Small‐Sized Nickel(II) Hydroxide Co‐Catalyst Prepared by Photodeposition for Hydrogen Production

Photodeposition has been widely used as a mild and efficient synthetic method to deposit co‐catalysts. It is also worth studying how to synthesize non‐noble metal photocatalysts with uniform dispersion. Different synthetic conditions in photodeposition have a certain influence on particle size distribution and photocatalytic activity. Therefore, we designed experiments to prepare the inexpensive composite photocatalyst Ni(OH)₂/g‐C₃N₄ by photodeposition. The Ni(OH)₂ co‐catalysts disperse uniformly with particle sizes of about 10 nm. The photocatalytic hydrogen production rate of Ni(OH)₂/g‐C₃N₄ reached about 19 mmol g^?1 h^?1, with the Ni(OH)₂ deposition amount about 1.57 %. During 16 h stability testing, the rate of hydrogen production did not decrease significantly. The composite catalyst also revealed a good hydrogen production performance under sunlight. The Ni(OH)₂ co‐catalyst enhanced the separation ability of photogenerated carriers, which was proved by surface photovoltage and fluorescence analysis.     

A Hydrogen‐Deficient Nickel–Cobalt Double Hydroxide for Photocatalytic Overall Water Splitting

Developing highly efficient and low‐cost photocatalysts for overall water splitting has long been a pursuit for converting solar power into clean hydrogen energy. Herein, we demonstrate that a nonstoichiometric nickel–cobalt double hydroxide can achieve overall water splitting by itself upon solar light irradiation, avoiding the consumption of noble‐metal co‐catalysts. We employed an intensive laser to ablate a NiCo alloy target immersed in alkaline solution, and produced so‐called L‐NiCo nanosheets with a nonstoichiometric composition and O^2?/Co³⁺ ions exposed on the surface. The nonstoichiometric composition broadens the band gap, while O^2? and Co³⁺ ions boost hydrogen and oxygen evolution, respectively. As such, the photocatalyst achieves a H₂ evolution rate of 1.7 μmol h^?1 under AM 1.5G sunlight irradiation and an apparent quantum yield (AQE) of 1.38 % at 380 nm.     

Integration of [(Co(bpy)3]2+ Electron Mediator with Heterogeneous Photocatalysts for CO2 Conversion

An efficient chemical system for electron generation and transfer is constructed by the integration of an electron mediator ([Co(bpy)₃]²⁺; bpy=2,2′‐bipyridine) with semiconductor photocatalysts. The introduction of [Co(bpy)₃]²⁺ remarkably enhances the photocatalytic activity of pristine semiconductor photocatalysts for heterogeneous CO₂ conversion; this is attributable to the acceleration of charge separation. Of particular interest is that the excellent photocatalytic activity of heterogeneous catalysts can be developed as a universal photocatalytic CO₂ reduction system. The present findings clearly demonstrate that the integration of an electron mediator with semiconductors is a feasible process for the design and development of efficient photochemical systems for CO₂ conversion.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1−xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g⁻¹ h⁻¹ and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

Acid‐treated g‐C3N4‐Cu2O composite catalyst with enhanced photocatalytic activity under visible‐light irradiation

Acid‐treated g‐C₃N₄‐Cu₂O was prepared by hydrothermal reduction followed by high temperature calcination and acid exfoliation. The structures and properties of as‐synthesized samples were characterized using a range of techniques, such as X‐ray photoelectron spectroscopy, scanning electron microscopy, Photoluminescence Spectroscopy and the Brunauer–Emmett–Teller (BET) theory. The photocatalytic activity was evaluated by measuring the photodegradation of methyl orange under visible‐light irradiation. Based on the results of TEM, XPS, EPR and other techniques, it was verified that a heterojunction was formed. The acid treatment process can increase the specific surface area to form abundant heterojunction interfaces as channels for photo‐generated carrier separation, thereby enhancing its light utilization and quantum efficiency. Results indicate that acid‐treated g‐C₃N₄‐Cu₂O possesses a large specific surface area, which provides plentiful activated sites for heterojunctions to form; in addition, it showed a high visible light effect and the minimum charge‐transfer resistance. Furthermore, the g‐C₃N₄‐Cu₂O material exhibits high levels of effectiveness and stability. Electron paramagnetic resonance and a series of radical trapping experiments demonstrate that the holes and ?O₂^? could be the main active species in methyl orange photodegradation. This work could provide new insights into the fabrication of composite materials as high‐performance photocatalysts, and facilitate their application in addressing environmental protection issues.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1?xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g^?1 h^?1 and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

An Amine-Functionalized Zirconium Metal–Organic Polyhedron Photocatalyst with High Visible-Light Activity for Hydrogen Production

Metal–organic polyhedra (MOPs) are promising candidates for many potential applications; however, their use as photocatalysts for hydrogen production has yet to be developed. Herein, the photocatalytic performance of a water-stable Zr-MOP, ZrT-1-NH₂, was evaluated, for the first time, through photocatalytic hydrogen evolution under visible-light irradiation. ZrT-1-NH₂ shows clearly enhanced photocatalytic activity (510.42 μmol g⁻¹ h⁻¹) for hydrogen production, in comparison with that of other homogeneous crystalline materials. If platinum nanoparticles were introduced into the photocatalytic system, the hydrogen production efficiency of ZrT-1-NH₂ could be further improved. For ZrT-1-NH₂, the conspicuous improvement in photocatalysis can be attributed to efficient electron–hole separation, targeted electron transfer, and excellent recombination suppression. Furthermore, ZrT-1-NH₂ shows excellent stability during photocatalytic hydrogen evolution over five continuous runs. This work illustrates that MOP-based photocatalysts hold promise for broad applications in the domain of clean energy.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

Metal Complexes Supported on Solid Matrices for Visible‐Light‐Driven Molecular Transformations

Hybridization of visible‐light‐responsive metal complexes with solid matrices offers an attractive route for practical catalyst design of nanostructured photocatalysts that are operationally simple and can attain unprecedented reactions owing to synergistic effects. This Minireview highlights the precise architectures of hybrid photocatalysts that enable efficient and selective photochemical molecular transformations, including selective oxidation by O₂ and H₂ evolution from water. Several techniques for the immobilization of metal complexes are discussed, including encapsulation within zeolite cavities, anchoring within mesoporous channels, incorporation within the macroreticular space of ion‐exchange resins, intercalation within the interlayer spaces of layered materials, and anchoring onto the plasmonic colloidal Ag nanoparticles. The relationships between photoluminescence characteristics and photocatalytic activities of these hybrid materials are also discussed.     

Increased Water Reduction Efficiency of Polyelectrolyte‐Bound Trimetallic [Ru,Rh,Ru] Photocatalysts in Air‐Saturated Aqueous Solutions

The groundbreaking use of polyelectrolytes to increase the efficiency of supramolecular photocatalysts in solar H₂ production schemes under aqueous aerobic conditions is reported. Supramolecular photocatalysts of the architecture [{(TL)₂Ru(BL)}₂RhX₂]⁵⁺ (BL=bridging ligand, TL=terminal ligand, X=halide) demonstrate high efficiencies in deoxygenated organic solvents but do not function in air‐saturated aqueous solution because of the quenching of the metal‐to‐ligand charge‐transfer (MLCT) excited state under these conditions. The new photocatalytic system incorporates poly(4‐styrenesulfonate) (PSS) into aqueous solutions containing [{(bpy)₂Ru(dpp)}₂RhCl₂]⁵⁺ (bpy=2,2′‐bipyridine, dpp=2,3‐bis(2‐pyridyl)pyrazine). PSS has a profound impact on the photocatalyst efficiency, increasing H₂ production over three times that of deoxygenated aqueous solutions alone. H₂ photocatalysis proceeds even under aerobic conditions for PSS‐containing solutions, an exciting consequence for solar hydrogen‐production research.     

Synthesis of W‐doped TiO2 by low‐temperature hydrolysis: Effects of annealing temperature and doping content on the surface microstructure and photocatalytic activity

A series of tungsten‐doped Titania photocatalysts were synthesized using a low‐temperature method. The effects of dopant concentration and annealing temperature on the phase transitions, crystallinity, electronic, optical, and photocatalytic properties of the resulting material were studied. The X‐ray patterns revealed that the doping delays the transition of anatase to rutile to a high temperature. A new phase W_yTi_1‐yO₂ appeared for 5.00 wt% W‐TiO₂ annealed at 900 °C. Raman and diffuse reflectance UV–Vis spectroscopy showed that band gap values decreased slightly up to 700 °C. X‐ray photoelectron spectroscopy showed that surface species viz. Ti³⁺, Ti⁴⁺, O^2?, oxygen‐vacancies, and adsorbed OH groups vary depending on the preparation conditions. The photocatalytic activity was evaluated via the degradation of methylene blue using LED white light. The degradation rate was affected by the percentage of dopants. The best photocatalytic activity was achieved with the sample labeled 5.00 wt% W‐TiO₂ annealed at 700 °C.     

In‐situ Platinum Plasmon Resonance Effect Prompt Titanium Dioxide Nanocube Photocatalytic Hydrogen Evolution

Herein, Pt‐decorated TiO₂ nanocube hierarchy structure (Pt‐TNCB) was fabricated by a facile solvothermal synthesis and in‐situ photodeposition strategy. The Pt‐TNCB exhibits an excellent solar‐driven photocatalytic hydrogen evolution rate (337.84 μmol h^?1), which is about 37 times higher than that of TNCB (9.19 μmol h^?1). Interestingly, its photocatalytic property is still superior to TNCB with post modification Pt (1 wt %) (208.11 μmol h^?1). The introduction of Pt efficiently extends the photoresponse of the composite material from UV to visible light region, simultaneously boosting their solar‐driven photocatalytic performance, which attribute to the porous structure, the sub size TNCB, the SPR effect of Pt NPs and strong interaction of two components. In fact, Pt NPs can enhance collective oscillations on delocalized electrons, which is conducive to capture electrons and hinder the recombination of photogenerated electron‐hole pairs, leading to the longer lifetime of photogenerated charges. The fabrication of Pt‐TNCB photocatalyst with SPR effect may provide a promising method to improve visible‐light photocatalytic activities for traditional photocatalysts.