Aluminum phosphate dispersed on a cellulose acetate fiber surface: Preparation, characterization and application for Li, Na and K separation

Cellulose acetate fibers with supported highly dispersed aluminum phosphate were prepared by reacting aluminum-containing cellulose acetate (Al₂O₃=3.5 wt.%; 1.1 mmol g⁻¹ aluminum atom per gram of the material) with phosphoric acid. Solid-state NMR spectra (CPMAS ³¹P NMR) data indicated that HPO₄²⁻ is the species present on the fiber surface. The specific concentration of acidic centers, determined by ammonia gas adsorption, is 0.50 mmol g⁻¹. The ion exchange capacities for Li⁺, Na⁺ and K⁺ ions were determined from ion exchange isotherms at 298 K and showed the following values (in mmol g⁻¹): Li⁺=0.03, Na⁺=0.44 and K⁺=0.50. The H⁺/Li⁺ exchange corresponds to the model of the ideal ion exchange with a small value of the corresponding equilibrium constant K=1.1×10⁻². Due to the strong cooperative effect, the H⁺/Na⁺ and H⁺/K⁺ ion exchange is non-ideal. These ion exchange equilibria were treated with the use of models of fixed bi- or tridentate centers, which consider the surface of the sorbent as an assemblage of polyfunctional sorption centers. Both the observed ion exchange capacities with respect to the alkaline metal ions and the equilibrium constants were discussed by taking into consideration the sequence of the ionic hydration radii for Li⁺, Na⁺ and K⁺. The matrix affinity order for the ions decreases as the hydration radii of the cations increase, i.e. Li⁺>Na⁺>K⁺. The high values of the separation factors S_Na⁺/Li⁺ and S_K⁺/Li⁺ (up to several hundred) provide quantitative separation of Na⁺ and K⁺ from Li⁺ from a mixture containing these three ions.     

Highly Selective Lithium Transport through Crown Ether Pillared Angstrom Channels

Biological ion channels use the synergistic effects of various strategies to realize highly selective ion sieving. For example, potassium channels use functional groups and angstrom-sized pores to discriminate rival ions and enrich target ions. Inspired by this, we constructed a layered crystal pillared by crown ether that incorporates these strategies to realize high Li⁺ selectivity. The pillared channels and crown ether have an angstrom-scale size. The crown ether specifically allows the low-barrier transport of Li⁺. The channels attract and enrich Li⁺ ions by up to orders of magnitude. As a result, our material sieves Li⁺ out of various common ions such as Na⁺, K⁺, Ca²⁺, Mg²⁺ and Al³⁺. Moreover, by spontaneously enriching Li⁺ ions, it realizes an effective Li⁺/Na⁺ selectivity of 1422 in artificial seawater where the Li⁺ concentration is merely 25 μM. We expect this work to spark technologies for the extraction of lithium and other dilute metal ions.     

Properties of new inorganic membranes prepared by metal alkoxide methods. Part III: New inorganic lithium permselective ion exchange membrane

Inorganic lithium permselective ion exchange membranes were prepared on a microporous alumina substrate by dip-coating solution containing Si(OC₂H₅)₄, LiOC₂H₅, Mn(OC₂H₅)₂ and C₂H₅OH. The membranes showed ion-selectivity for cation over anion and permselectivity for Li⁺ over Na⁺. The static transport number for cation [K⁺] is 0.75 and the permselectivity for Na⁺ over Li⁺ is 0.29, comparing 2.57 for ordinary organic ion exchange membrane.     

Sulfur-Containing Foldamer-Based Artificial Lithium Channels

Unlike many other biologically relevant ions (Na⁺, K⁺, Ca²⁺, Cl⁻, etc) and protons, whose cellular concentrations are closely regulated by highly selective channel proteins, Li⁺ ion is unusual in that its concentration is well tolerated over many orders of magnitude and that no lithium-specific channel proteins have so far been identified. While one naturally evolved primary pathway for Li⁺ ions to traverse across the cell membrane is through sodium channels by competing with Na⁺ ions, highly sought-after artificial lithium-transporting channels remain a major challenge to develop. Here we show that sulfur-containing organic nanotubes derived from intramolecularly H-bonded helically folded aromatic foldamers of 3.6 Å in hollow cavity diameter could facilitate highly selective and efficient transmembrane transport of Li⁺ ions, with high transport selectivity factors of 15.3 and 19.9 over Na⁺ and K⁺ ions, respectively.     

Thermal Responsive Ion Selectivity of Uranyl Peroxide Nanocages: An Inorganic Mimic of K+ Ion Channels

An actinyl peroxide cage cluster, Li_48+mK₁₂(OH)_m[UO₂(O₂)(OH)]₆₀ (H₂O)_n (m≈20 and n≈310; U₆₀), discriminates precisely between Na⁺ and K⁺ ions when heated to certain temperatures, a most essential feature for K⁺ selective filters. The U₆₀ clusters demonstrate several other features in common with K⁺ ion channels, including passive transport of K⁺ ions, a high flux rate, and the dehydration of U₆₀ and K⁺ ions. These qualities make U₆₀ (a pure inorganic cluster) a promising ion channel mimic in an aqueous environment. Laser light scattering (LLS) and isothermal titration calorimetry (ITC) studies revealed that the tailorable ion selectivity of U₆₀ clusters is a result of the thermal responsiveness of the U₆₀ hydration shells.     

Properties and Applications of Cryptand‐22 Surfactant for Ion Transport and Ion Extraction

A non‐ionic cryptand‐22 surfactant consisting of a macrocyclic cryptand‐22 polar head and a long paraffinic chain (C₁₀H₂₁‐Cryptand‐22) was synthesized and characterized. The critical micellar concentration (CMC) of the cryptand surfactant in ROH/H₂O mixed solvent was determined by the pyrene fluorescence probe method. In general, the cmc of the cryptand surfactant increased upon decreasing the polarity of the surfactant solution. The cryptand surfactant also can behave as a pseudo cationic surfactant by protonation of cryptand‐22 or complexation with metal ions. Effects of protonation and metal ions on the cmc of the cryptand surfactant were investigated. A preliminary application of the cryptand surfactant as an ion‐transport carrier for metal ions, e.g., Li⁺, Na⁺, K⁺ and Sr²⁺, through an organic liquid‐membrane was studied. The transport ability of the cryptand surfactant for these metal ions was in the order: K⁺ ≥ Na⁺ < Li⁺ < Sr²⁺. A comparison of the ion‐transport ability of the cryptand surfactant with other macrocyclic polyethers, e.g., dibenzo‐18‐crown‐6, 18‐crown‐6 and benzo‐15‐crown‐5, was studied and discussed. Among these macrocyclic polyethers, the cryptand surfactant was the best ion‐transport carrier for Na⁺, Li⁺ and Sr²⁺ ions. Furthermore, a foam extraction system using the cryptand surfactant to extract the cupric ion was also investigated.     

Selective Permeability of Uranyl Peroxide Nanocages to Different Alkali Ions: Influences from Surface Pores and Hydration Shells

The precise guidance to different ions across the biological channels is essential for many biological processes. An artificial nanopore system will facilitate the study of the ion‐transport mechanism through nanosized channels and offer new views for designing nanodevices. Herein we reveal that a 2.5 nm‐sized, fullerene‐shaped molecular cluster Li_48+mK₁₂(OH)_m[UO₂(O₂)(OH)]_60?(H₂O)_n (m≈20 and n≈310) ( U₆₀ ) shows selective permeability to different alkali ions. The subnanometer pores on the water–ligand‐rich surface of U₆₀ are able to block Rb⁺ and Cs⁺ ions from passing through, while allowing Na⁺ and K⁺ ions, which possess larger hydrated sizes, to enter the interior space of U₆₀ . An interestingly high entropy gain during the binding process between U₆₀ and alkali ions suggests that the hydration shells of Na⁺/K⁺ and U₆₀ are damaged during the interaction. The ion selectivity of U₆₀ is greatly influenced by both the morphologies of the surface nanopores and the dynamics of the hydration shells.     

Ion exchange with silica-titania gels

Silica-titania gels containing 25, 50 and 75 mol% TiO₂ were prepared and the sorption of alkali and alkaline earth metal ions by these materials has been studied. Distribution coefficient values for Cs⁺ and Sr²⁺ ions were found to pass through broad maxima as a function of TiO₂ content except in the case of Sr under alkaline conditions where there was a continuous increase. Capacity values also increased with TiO₂ content and samples containing 50% (for K⁺ and Cs⁺), 75% (for Li⁺ and Na⁺) and 25%/50% (for Ca²⁺, Sr²⁺ and Ba²⁺) TiO₂ exhibited maximum capacities. However, unlike with alkali metals, capacities of a given sorbent for the three alkaline earth ions were almost the same. Large capacities obtained for the latter ions seem to indicate a mineral-forming reaction with 25% and 50% materials. On the other hand, the 25% TiO₂ gel seems to sorb Sr at trace level by an ion exchange mechanism. Coupled with its Cs sorption capability, this material may find potential use in large scale decontamination of low level waste solutions.     

Highly Selective Transmembrane Transport of Exogenous Lithium Ions through Rationally Designed Supramolecular Channels

Lithium ions have been applied in the clinic in the treatment of psychiatric disorders. In this work, we report artificial supramolecular lithium channels composed of pore-containing small aromatic molecules. By adjusting the lumen size and coordination numbers, we found that one of the supramolecular channels developed shows unprecedented transmembrane transport of exogenous lithium ions with a Li⁺/Na⁺ selectivity ratio of 23.0, which is in the same level of that of natural Na⁺ channels. Furthermore, four coordination sites inside channels are found to be the basic requirement for ion transport function. Importantly, this artificial lithium channel displays very low transport of physiological Na⁺, K⁺, Mg²⁺, and Ca²⁺ ions. This highly selective Li⁺ channel may become an important tool for studying the physiological role of intracellular lithium ions, especially in the treatment of psychiatric disorders.     

Optical absorption and EPR spectroscopic studies of (30 − x)Li2O–xK2O–10CdO–59B2O3–1Fe2O3: An evidence for mixed alkali effect

Optical absorption and EPR spectroscopic studies were carried on (30 ? x)Li₂O–xK₂O–10CdO–59B₂O₃–1Fe₂O₃ (x = 0–30) glass system to understand the effect of progressive doping of Li⁺ ion with K⁺ ion. Optical absorption results show typical spectra of Fe³⁺ ions and the various optical parameters such as, optical band gap, Urbach energy, oxide ion polarizability, optical basicity and interaction parameter were evaluated from the experimental data. The observed optical band gap and Urbach energy values show large deviation from the linearity where as the other parameters show small deviation from the linearity with the progressive substitution of Li⁺ ions with K⁺ ions. The observed EPR spectra are representative of Fe³⁺ ion in octahedral and axial fields in the glass network. The number of paramagnetic centers and paramagnetic susceptibility values were evaluated at different resonance lines for all the specimens and these parameters show non-additive nature with the progressive substitution of Li⁺ ions with K⁺ ions in the glass network. This is first ever observation of mixed alkali effect (MAE) in EPR and optical parameters of mixed alkali borate glasses.     

Mechanismus und Selektivität des Alkali-Ionentransportes in Modell-Membranen in Gegenwart des Antibioticums Valinomycin

Selective transport of potassium ions through synthetic membranes impregnated with valinomycin in octane-2-ol in the presence of equal amounts of K⁺ and Na⁺ or Li⁺ ions is induced on application of a potential difference across these membranes. By using ¹⁴C-labelled valinomycin it is shown that transport of potassium ions is accompanied by an equivalent transport of valinomycin within the membrane, consistent with the formation of a 1 : 1 complex of K⁺ with valinomycin. The exchange of ligands is shown to occur during the transport process so that a carrier-relay mechanism, as proposed earlier for macrotetrolide-mediated potassium transport, accounts for all experimental results on the bulk membranes studied.     

Cation exchange, interlayer spacing, and thermal analysis of Na/Ca-montmorillonite modified with alkaline and alkaline earth metal ions

Na-montmorillonites were exchanged with Li⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺, while Ca-montmorillonites were treated with alkaline and alkaline earth ions except for Ra²⁺ and Ca²⁺. Montmorillonites with interlayer cations Li⁺ or Na⁺ have remarkable swelling capacity and keep excellent stability. It is shown that metal ions represent different exchange ability as follows: Cs⁺?>?Rb⁺?>?K⁺?>?Na⁺?>?Li⁺ and Ba²⁺?>?Sr²⁺?>?Ca²⁺?>?Mg²⁺. The cation exchange capacity with single ion exchange capacity illustrates that Mg²⁺ and Ca²⁺ do not only take part in cation exchange but also produce physical adsorption on the montmorillonite. Although interlayer spacing d ₀₀₁ depends on both radius and hydration radius of interlayer cations, the latter one plays a decisive role in changing d ₀₀₁ value. Three stages of temperature intervals of dehydration are observed from the TG/DSC curves: the release of surface water adsorbed (36?C84?°C), the dehydration of interlayer water and the chemical-adsorption water (47?C189?°C) and dehydration of bound water of interlayer metal cation (108?C268?°C). Data show that the quantity and hydration energy of ions adsorbed on montmorillonite influence the water content in montmorillonite. Mg²⁺-modified Na-montmorillonite which absorbs the most quantity of ions with the highest hydration energy has the maximum water content up to 8.84%.     

Transport of metal ions through cation exchange membranes containing episulfide (or thiol) groups and/or triethylenetetramine side chains

Two types of cation exchange membranes bearing sulfonic acid groups were prepared. One membrane (EA membrane), having episulfide groups beside sulfonic acid groups, was prepared with 2,3-epithiopropylmethacrylate (ETMA)-2-acrylamide-2-methylpropane sulfonic acid (AMPS) copolymers and the another one (EA-TTA membrane) having thiol groups, triethylenetetramide (TTA) side chains, and carboxyl groups beside sulfonic acid groups was prepared by treating EA membranes with TTA in a water-1,4-dioxane mixture solution. The transport of metal ions such as K⁺, Li⁺, Ag⁺, Ca²⁺, and Cu²⁺ through the membranes was investigated. The transport rate of Ag⁺ through the EA membranes was considerably lower than those of other metal ions from solution. High selective transport of Ag⁺ from mixed solution could be observed using the EA and EA-TTA membranes. Transport of Cu²⁺ and Ca²⁺ through the EA-TTA membrane was depressed by an electrostatic repulsion between ammonium groups in the membranes and metal ions when HNO₃ or sodium ethylenediamine tetraacetate was used as receiving solution.     

Synthesis of LiAlTiO4 and its selectivity to Li+ exchange

The ion-exchanger LiAlTiO₄ of spinel type was prepared by the common precipitation/hydrothermal crystallization method, and was acid-modified. Its ion-exchange properties for alkali ions such as saturation capacity of exchange, distribution coefficient and pH titration curve were determined. LiAlTiO₄ was characterized by the X-ray diffraction method. The acid treatment of LiAlTiO₄ caused Li⁺ extraction ratio to change from 28% to 72%, while the dissolution of Al is less than 6.8%. This inorganic ion-exchanger (LiAlTiO₄-700) has a higher saturation capacity of exchange for Li than for other alkali ions, the saturation capacity of exchange for Li⁺ reaches 4.29 mmol/g (30.03 mg/g); LiAlTiO₄-700(H) has a higher selectivity of ion exchange for Li⁺ than for other alkali ions. These results show LiAlTiO₄-700(H) has better memory and selectivity of ion exchange, and higher capacity of ion exchange for Li⁺. It is a kind of prospective ionic sieve for Li⁺. __________ Translated from Chinese Journal of Applied Chemistry, 2005, 22 (7) (in Chinese)     

A Black Phosphorus–Graphite Composite Anode for Li-/Na-/K-Ion Batteries

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In-depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP-based composites for high-performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li⁺, Na⁺, and K⁺ with BP were performed. Ex situ X-ray absorption near-edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K⁺ storage than for Na⁺ and Li⁺, which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K₃P, compared with Li₃P and Na₃P. As a result, restricting the formation of K₃P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g⁻¹ which retains at 600 mAh g⁻¹ after 50 cycles at 0.25 A g⁻¹.     

Ion transport membranes based on conducting polymers

Polypyrrole membranes containing four different dopant ions were prepared galvanostatically from aqueous solutions of pyrrole (0.1 M) and the appropriate counter ion salt (0.1 M). The transport of mono-valent cations through each membrane was achieved by applying a potential gradient across the membranes. The influence of a number of set up parameters on the flux of K⁺ ions across a PPy/pTS membrane was assessed, as well as the relative selectivities of the four membrane types for the mono-valent cations; Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺.     

Oligoether‐Strapped Calix[4]pyrrole: An Ion‐Pair Receptor Displaying Cation‐Dependent Chloride Anion Transport

A ditopic ion‐pair receptor ( 1 ), which has tunable cation‐ and anion‐binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([ 1? F]^? and [ 1? Cl]^?) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li⁺, Na⁺, K⁺, Cs⁺, as their perchlorate salts), ion‐dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [ 1? F]^?, no appreciable interaction with the K⁺ ion was seen. On the other hand, when this complex was treated with Li⁺ or Na⁺ ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li⁺, Na⁺, K⁺, treating [ 1?F ]^? with Cs⁺ ions gave rise to a stable, host‐separated ion‐pair complex, [F ?1? Cs], which contains the Cs⁺ ion bound in the cup‐like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [ 1? Cl]^?. Here, no appreciable interaction was observed with Na⁺ or K⁺. In contrast, treating with Li⁺ produces a tight ion‐pair complex, [ 1? Li ? Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [ 1? F]^?, treatment of [ 1? Cl]^? with Cs⁺ ions gives rise to a host‐separated ion‐pair complex, [Cl ?1? Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co‐transport) and antiport (nitrate‐for‐chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate‐for‐chloride anion exchange mechanism.     

Calix[4]pyrrole‐Based Heteroditopic Ion‐Pair Receptor That Displays Anion‐Modulated,Cation‐Binding Behavior

A new ditopic ion‐pair receptor 1 was designed, synthesized, and characterized. Detailed binding studies served to confirm that this receptor binds fluoride and chloride ions (studied as their tetraalkylammonium salts) and forms stable 1:1 complexes in CDCl₃. Treatment of the halide‐ion complexes of 1 with Group I and II metal ions (Li⁺, Na⁺, K⁺, Cs⁺, Mg²⁺, and Ca²⁺; studied as their perchlorate salts in CD₃CN) revealed unique interactions that were found to depend on both the choice of the added cation and the precomplexed anion. In the case of the fluoride complex [ 1? F]^? (preformed as the tetrabutylammonium (TBA⁺) complex), little evidence of interaction with the K⁺ ion was seen. In contrast, when this same complex (i.e., [ 1? F]^? as the TBA⁺ salt) was treated with the Li⁺ or Na⁺ ions, complete decomplexation of the receptor‐bound fluoride ion was observed. In sharp contrast to what was seen with Li⁺, Na⁺, and K⁺, treating complex [ 1? F]^? with the Cs⁺ ion gave rise to a stable, receptor‐bound ion‐pair complex [Cs ?1? F] that contains the Cs⁺ ion complexed within the cup‐like cavity of the calix[4]pyrrole, which in turn was stabilized in its cone conformation. Different complexation behavior was observed in the case of the chloride complex [ 1? Cl]^?. In this case, no appreciable interaction was observed with Na⁺ or K⁺. In addition, treating [ 1? Cl]^? with Li⁺ produces a tightly hydrated dimeric ion‐pair complex [ 1? LiCl(H₂O)]₂ in which two Li⁺ ions are bound to the crown moiety of the two receptors. In analogy to what was seen in the case of [ 1? F]^?, exposure of [ 1? Cl]^? to the Cs⁺ ion gives rise to an ion‐pair complex [Cs ?1? Cl] in which the cation is bound within the cup of the calix[4]pyrrole. Different complexation modes were also observed when the binding of the fluoride ion was studied by using the tetramethylammonium and tetraethylammonium salts.     

A Black Phosphorus–Graphite Composite Anode for Li‐/Na‐/K‐Ion Batteries

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In‐depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP‐based composites for high‐performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li⁺, Na⁺, and K⁺ with BP were performed. Ex situ X‐ray absorption near‐edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K⁺ storage than for Na⁺ and Li⁺, which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K₃P, compared with Li₃P and Na₃P. As a result, restricting the formation of K₃P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g^?1 which retains at 600 mAh g^?1 after 50 cycles at 0.25 A g^?1.     

Selective substitution of alkali cations in mixed alkali glass by solid-state electrochemistry

Electrosubstitution of alkali cations in mixed-alkali glass containing both Na₂O and K₂O for other monovalent metal cations (M⁺=Li⁺, Ag⁺, and Cs⁺) was investigated using a solid-state electrochemical method. The fundamental electrolysis system consists of anode/M⁺-conducting microelectrode/glass/Na-β″-Al₂O₃/cathode, where M⁺ is substituted for the alkali metal ions in the glass under an applied electric field. Li⁺ ions attacked only Na⁺ sites, and Ag⁺ ions replaced Na⁺ sites more readily than K⁺. In contrast, Cs⁺ ions simultaneously substituted for both Na⁺ and K⁺ sites. The substitution behavior appears to depend on the difference in ionic conductivity between K⁺ and Na⁺ and the radius of the dopant. This mechanism was discussed qualitatively.