Stabilizing the Oxygen Lattice and Reversible Oxygen Redox Chemistry through Structural Dimensionality in Lithium‐Rich Cathode Oxides

Lattice‐oxygen redox (l‐OR) has become an essential companion to the traditional transition‐metal (TM) redox charge compensation to achieve high capacity in Li‐rich cathode oxides. However, the understanding of l‐OR chemistry remains elusive, and a critical question is the structural effect on the stability of l‐OR reactions. Herein, the coupling between l‐OR and structure dimensionality is studied. We reveal that the evolution of the oxygen‐lattice structure upon l‐OR in Li‐rich TM oxides which have a three‐dimensional (3D)‐disordered cation framework is relatively stable, which is in direct contrast to the clearly distorted oxygen‐lattice framework in Li‐rich oxides which have a two‐dimensional (2D)/3D‐ordered cation structure. Our results highlight the role of structure dimensionality in stabilizing the oxygen lattice in reversible l‐OR, which broadens the horizon for designing high‐energy‐density Li‐rich cathode oxides with stable l‐OR chemistry.     

Manganese Oxide(MnO) and Cadmium Dioxide(CdO_2) Attached to Carbon Nanotube(8, 0) as Anodes of Metal-ion Batteries: a DFT Study

Performance of carbon nanotube(CNT) and their attached metal oxides(manganese oxide(MnO) and cadmium dioxide(CdO2)) structures as anode electrodes in lithium-ion battery(LIB) and potassium-ion battery(KIB) are investigated. The Gibbs free energy of adsorption of Li and K atoms/ions on surfaces of CNT(8, 0), CNT(8, 0)-MnO and CNT(8, 0)-CdO2 are calculated. The cell voltages(Vcell) of Li and K atoms/ions adsorption on studied surfaces are examined. The Vcell of LIBs with metal-oxides attached to CNT(8, 0) as anode electrodes are higher than those KIBs. The adsorbed metal oxides(MnO and CdO2) on CNT(8, 0) increased the charges, electronic conductivity and Vcell of LIB and KIB, efficiently. The CNT(8, 0)-CdO2 as anode electrodes in LIB and KIB is proposed.     

Oxygen Vacancy‐Mediated Photocatalysis of BiOCl: Reactivity,Selectivity, and Perspectives

Semiconductor photocatalysis is a trustworthy approach to harvest clean solar light for energy conversions, while state‐of‐the‐art catalytic efficiencies are unsatisfactory because of the finite light response and/or recombination of robust charge carriers. Along with the development of modern material characterization techniques and electronic‐structure computations, oxygen vacancies (OVs) on the surface of real photocatalysts, even in infinitesimal concentration, are found to play a more decisive role in determining the kinetics, energetics, and mechanisms of photocatalytic reactions. This Review endeavors to clarify the inherent functionality of OVs in photocatalysis at the surface molecular level using 2D BiOCl as the platform. Structure sensitivity of OVs on reactivity and selectivity of photocatalytic reactions is intensely discussed via confining OVs onto prototypical BiOCl surfaces of different structures. The critical understanding of OVs chemistry can help consolidate and advance the fundamental theories of photocatalysis, and also offer new perspectives and guidelines for the rational design of catalysts with satisfactory performance.     

Cyano‐Bridged Trimetallic Coordination Polymer Nanoparticles and Their Thermal Decomposition into Nanoporous Spinel Ferromagnetic Oxides

The synthesis of a novel family of cyano‐bridged trimetallic coordination polymers (CPs) with various compositions and shapes has been reported by changing the compositional ratios of Fe, Co, and Ni species in the reaction system. In order to efficiently control the nucleation rate and the crystal growth, trisodium citrate dihydrate plays an important role as a chelating agent. After the obtained cyano‐bridged trimetallic CPs undergo thermal treatment in air at three different temperatures (250, 350, and 450 °C), nanoporous spinel metal oxides are successfully obtained. Interestingly, the obtained nanoporous metal oxides are composed of small crstalline grains, and the grains are oriented in the same direction, realizing pseudo‐single crystals with nanopores. The resultant nanoporous spinel oxides feature interesting magnetic properties. Cyano‐bridged multimetallic CPs with various sizes and shapes can provide a pathway toward functional nanoporous metal oxides that are not attainable from simple cyano‐bridged CPs containing single metal ions.     

Single‐Crystal‐like Nanoporous Spinel Oxides: A Strategy for Synthesis of Nanoporous Metal Oxides Utilizing Metal‐Cyanide Hybrid Coordination Polymers

Development of a new method to synthesize nanoporous metal oxides with highly crystallized frameworks is of great interest because of their wide use in practical applications. Here we demonstrate a thermal decomposition of metal‐cyanide hybrid coordination polymers (CPs) to prepare nanoporous metal oxides. During the thermal treatment, the organic units (carbon and nitrogen) are completely removed, and only metal contents are retained to prepare nanoporous metal oxides. The original nanocube shapes are well‐retained even after the thermal treatment. When both Fe and Co atoms are contained in the precursors, nanoporous Fe?Co oxide with a highly oriented crystalline framework is obtained. On the other hand, when nanoporous Co oxide and Fe oxide are obtained from Co‐ and Fe‐contacting precursors, their frameworks are amorphous and/or poorly crystallized. Single‐crystal‐like nanoporous Fe?Co oxide shows a stable magnetic property at room temperature compared to poly‐crystalline metal oxides. We further extend this concept to prepare nanoporous metal oxides with hollow interiors. Core‐shell heterostructures consisting of different metal‐cyanide hybrid CPs are prepared first. Then the cores are dissolved by chemical etching using a hydrochloric acid solution (i.e., the cores are used as sacrificial templates), leading to the formation of hollow interiors in the nanocubes. These hollow nanocubes are also successfully converted to nanoporous metal oxides with hollow interiors by thermal treatment. The present approach is entirely different from the surfactant‐templating approaches that traditionally have been utilized for the preparation of mesoporous metal oxides. We believe the present work proves a new way to synthesize nanoporous metal oxides with controlled crystalline frameworks and architectures.     

Formation and diffusion of oxygen-vacancy pairs on TiO2(110)-(1x1)

We present the measurements for the diffusion of bridging oxygen vacancy (OV) crossover Ti rows via OV pairs (OVPs). Using a high-resolution scanning tunneling microscope (STM), we show that the OVs can be moved along the bridging oxygen rows driven by the STM tip at voltages higher than 3.0 V on TiO(2)(110)-(1x1) surface. It is found that the combination of OVPs leads to the formation of OVPs, which can diffuse crossover Ti rows under the mediation of OVs in adjacent bridging oxygen rows. The deduced diffusion activation energy for the diffusive OVPs from experiments is in agreement with first-principles calculations. The reaction activation energy of the OVPs with O(2) is lower than that of the OVs by 82 meV.     

A Molecular Placeholder Strategy To Access a Family of Transition‐Metal‐Functionalized Vanadium Oxide Clusters

Systematic access to metal‐functionalized polyoxometalates has thus far been limited to lacunary tungsten oxide and molybdenum oxide clusters. The first controlled, stepwise bottom‐up assembly route to metal‐functionalized molecular vanadium oxides is now presented. A di‐vacant vanadate cluster with two metal binding sites, (DMA)₂[V₁₂O₃₂Cl]^3? (DMA=dimethylammonium) is formed spontaneously in solution and characterized by single‐crystal X‐ray diffraction, ESI mass spectrometry, ⁵¹V NMR spectroscopy, and elemental analyses. In the cluster, the metal binding sites are selectively blocked by hydrogen‐bonded DMA placeholder cations. Reaction of the cluster with transition metals TM (Fe³⁺, Co²⁺, Cu²⁺, Zn²⁺) gives access to mono‐functionalized vanadate clusters (DMA)[{TM(L)}V₁₂O₃₂Cl]^n? (L=ligand). Metal binding is accomplished by significant distortions of the vanadium oxide framework reminiscent of a pincer movement. Cluster stability under technologically relevant conditions in the solid‐state and solution is demonstrated.     

Enhanced Li+ Diffusion and Lattice oxygen Stability by the High Entropy Effect in Disordered-Rocksalt Cathodes

Cation-disordered Rocksalt oxides (DRXs) are a promising new class of cathode materials for Li-ion batteries due to their natural abundance, low cost and great electrochemical performance. High entropy strategy in Mn-based DRXs appears to be an effective strategy for improving the rate capability, but it suffers from challenges including capacity degradation. The present paper reports a new group of high entropy DRXs (HE DRX) based on Ni²⁺-Nb⁵⁺ pair; the structural and chemical evolution upon cycling of DRXs with an increasing transition metal (TM) species are systematically investigated. An explanation is proposed for how the crystal field stability energy determines that HE DRX could exist in single Rocksalt solid solution structures. We further reveal that the charge compensation mechanism in HE DRX is the result of various TM synergistic effect. More importantly, through various in situ and ex situ techniques and theoretical calculation, the effective integration of more TM cation species within the HE DRX framework promotes better Li⁺ diffusion and improves lattice oxygen stability, consequently increasing capacity upon cycling.     

Enhanced Intrinsic Catalytic Activity of λ‐MnO2 by Electrochemical Tuning and Oxygen Vacancy Generation

Chemically prepared λ‐MnO₂ has not been intensively studied as a material for metal–air batteries, fuel cells, or supercapacitors because of their relatively poor electrochemical properties compared to α‐ and δ‐MnO₂. Herein, through the electrochemical removal of lithium from LiMn₂O₄, highly crystalline λ‐MnO₂ was prepared as an efficient electrocatalyst for the oxygen reduction reaction (ORR). The ORR activity of the material was further improved by introducing oxygen vacancies (OVs) that could be achieved by increasing the calcination temperature during LiMn₂O₄ synthesis; a concentration of oxygen vacancies in LiMn₂O₄ could be characterized by its voltage profile as the cathode in a lithiun–metal half‐cell. λ‐MnO_2?z prepared with the highest OV exhibited the highest diffusion‐limited ORR current (5.5 mA cm^?2) among a series of λ‐MnO_2?z electrocatalysts. Furthermore, the number of transferred electrons (n) involved in the ORR was >3.8, indicating a dominant quasi‐4‐electron pathway. Interestingly, the catalytic performances of the samples were not a function of their surface areas, and instead depended on the concentration of OVs, indicating enhancement in the intrinsic catalytic activity of λ‐MnO₂ by the generation of OVs. This study demonstrates that differences in the electrochemical behavior of λ‐MnO₂ depend on the preparation method and provides a mechanism for a unique catalytic behavior of cubic λ‐MnO₂.     

O2 Activation on Ceria Catalysts—The Importance of Substrate Crystallographic Orientation

An atomic‐level understanding of dioxygen activation on metal oxides remains one of the major challenges in heterogeneous catalysis. By performing a thorough surface‐science study of all three low‐index single‐crystal surfaces of ceria, probably the most important redox catalysts, we provide a direct spectroscopic characterization of reactive dioxygen species at defect sites on the reduced ceria (110) and (100) surfaces. Surprisingly, neither of these superoxo and peroxo species was found on ceria (111), the thermodynamically most stable surface of this oxide. Applying density functional theory, we could relate these apparently inconsistent findings to a sub‐surface diffusion of O vacancies on (111) substrates, but not on the less‐closely packed surfaces. These observations resolve a long standing debate concerning the location of O vacancies on ceria surfaces and the activation of O₂ on ceria powders.     

Enhanced Electrocatalytic N2 Reduction via Partial Anion Substitution in Titanium Oxide–Carbon Composites

The electrochemical conversion of N₂ at ambient conditions using renewably generated electricity is an attractive approach for sustainable ammonia (NH₃) production. Considering the chemical inertness of N₂, rational design of efficient and stable catalysts is required. Therefore, in this work, it is demonstrated that a C‐doped TiO₂/C (C‐Ti_xO_y/C) material derived from the metal–organic framework (MOF) MIL‐125(Ti) can achieve a high Faradaic efficiency (FE) of 17.8 %, which even surpasses most of the established noble metal‐based catalysts. On the basis of the experimental results and theoretical calculations, the remarkable properties of the catalysts can be attributed to the doping of carbon atoms into oxygen vacancies (OVs) and the formation of Ti?C bonds in C‐Ti_xO_y. This binding motive is found to be energetically more favorable for N₂ activation compared to the non‐substituted OVs in TiO₂. This work elucidates that electrochemical N₂ reduction reaction (NRR) performance can be largely improved by creating catalytically active centers through rational substitution of anions into metal oxides.     

Shifting Oxygen Charge Towards Octahedral Metal: A Way to Promote Water Oxidation on Cobalt Spinel Oxides

Cobalt spinel oxides are a class of promising transition metal (TM) oxides for catalyzing oxygen evolution reaction (OER). Their catalytic activity depends on the electronic structure. In a spinel oxide lattice, each oxygen anion is shared amongst its four nearest transition metal cations, of which one is located within the tetrahedral interstices and the remaining three cations are in the octahedral interstices. This work uncovered the influence of oxygen anion charge distribution on the electronic structure of the redox‐active building block Co?O. The charge of oxygen anion tends to shift toward the octahedral‐occupied Co instead of tetrahedral‐occupied Co, which hence produces strong orbital interaction between octahedral Co and O. Thus, the OER activity can be promoted by pushing more Co into the octahedral site or shifting the oxygen charge towards the redox‐active metal center in CoO₆ octahedra.     

ZrO2晶相对ZnO/ZrO2+SAPO-34双功能催化剂上合成气制烯烃反应的影响

烯烃是重要的化工原料,目前主要通过石油催化裂化得到.随着石油资源的消耗以及人们对烯烃需求的日益增长,开发非石油路线制取烯烃势在必行.合成气可以从煤、天然气和生物质等获得,由合成气作为重要的C1平台分子一步制取烯烃(STO)的过程受到了广泛关注.将合成气制甲醇/二甲醚的金属催化剂与甲醇制烯烃的分子筛催化剂耦合得到的混合双...     

Revisiting the 7‐Phospanorbornene Family: New P‐Alkyl Derivatives

A series of 1‐alkyl‐3‐methyl‐2,5‐dihydro‐1H‐phosphole oxides were converted to the corresponding phosphole oxides that, by the Diels–Alder reaction with N‐maleimide derivatives or with another unit of phosphole oxide, yielded trapped phosphole oxides or phosphole oxide dimers, respectively, as new 7‐phosphanorbornene 7‐oxides. The stereostructures of three derivatives were evaluated by single crystal X‐ray analysis. The regio‐ and stereospecific dimerization was studied by B3LYP/6‐31G(d,p) quantum chemical calculations, whose results were in accord with syntheses. Novel mechanistic features were explored. The geometrical data obtained by single crystal X‐ray analysis validated the results of quantum chemical calculations, as the deviation was less than 3%.     

Mn−O Covalency Governs the Intrinsic Activity of Co‐Mn Spinel Oxides for Boosted Peroxymonosulfate Activation

Transition metal (TM)‐based bimetallic spinel oxides can efficiently activate peroxymonosulfate (PMS) presumably attributed to enhanced electron transfer between TMs, but the existing model cannot fully explain the efficient TM redox cycling. Here, we discover a critical role of TM?O covalency in governing the intrinsic catalytic activity of Co_3?xMn_xO₄ spinel oxides. Experimental and theoretical analysis reveals that the Co sites significantly raises the Mn valence and enlarges Mn?O covalency in octahedral configuration, thereby lowering the charge transfer energy to favor Mn_Oh–PMS interaction. With appropriate Mn^IV/Mn^III ratio to balance PMS adsorption and Mn^IV reduction, the Co_1.1Mn_1.9O₄ exhibits remarkable catalytic activities for PMS activation and pollutant degradation, outperforming all the reported TM spinel oxides. The improved understandings on the origins of spinel oxides activity for PMS activation may inspire the development of more active and robust metal oxide catalysts.     

Surface Faceting and Reconstruction of Ceria Nanoparticles

The surface atomic arrangement of metal oxides determines their physical and chemical properties, and the ability to control and optimize structural parameters is of crucial importance for many applications, in particular in heterogeneous catalysis and photocatalysis. Whereas the structures of macroscopic single crystals can be determined with established methods, for nanoparticles (NPs), this is a challenging task. Herein, we describe the use of CO as a probe molecule to determine the structure of the surfaces exposed by rod‐shaped ceria NPs. After calibrating the CO stretching frequencies using results obtained for different ceria single‐crystal surfaces, we found that the rod‐shaped NPs actually restructure and expose {111} nanofacets. This finding has important consequences for understanding the controversial surface chemistry of these catalytically highly active ceria NPs and paves the way for the predictive, rational design of catalytic materials at the nanoscale.     

Controlled Synthesis of Nanoporous Nickel Oxide with Two‐Dimensional Shapes through Thermal Decomposition of Metal–Cyanide Hybrid Coordination Polymers

The urgent need for nanoporous metal oxides with highly crystallized frameworks is motivating scientists to try to discover new preparation methods, because of their wide use in practical applications. Recent work has demonstrated that two‐dimensional (2D) cyanide‐bridged coordination polymers (CPs) are promising materials and appropriate for this purpose (Angew. Chem. Int. Ed.­ 2013 , 52, 1235). After calcination, 2D CPs can be transformed into nanoporous metal oxides with a highly accessible surface area. Here, this strategy is adopted in order to form 2D nanoporous nickel oxide (NiO) with tunable porosity and crystallinity, using trisodium citrate dihydrate as a controlling agent. The presence of trisodium citrate dihydrate plays a key role in the formation of 2D nanoflakes by controlling the nucleation rate and the crystal growth. The size of the nanoflakes gradually increases by augmenting the amount of trisodium citrate dihydrate in the reaction. After heating the as‐prepared CPs in air at different temperatures, nanoporous NiO can be obtained. During this thermal treatment, organic units (carbon and nitrogen) are completely removed and only the metal content remains to take part in the formation of nanoporous NiO. In the case of large‐sized 2D CP nanoflakes, the original 2D flake‐shapes are almost retained, even after thermal treatment at low temperature, but they are completely destroyed at high temperature because of further crystallization in the framework. Nanoporous NiO with high surface area shows significant efficiency and interesting results for supercapacitor application.     

Vanadium oxide surface studies

The vanadium oxides can exist in a range of single and mixed valencies with a large variety of structures. The large diversity of physical and chemical properties that they can thus possess make them technologically important and a rich ground for basic research. Here we assess the present status of the microscopic understanding of the physico-chemical properties of vanadium oxide surfaces. The discussion is restricted to atomically well-defined systems as probed by surface techniques. Following a brief review of the properties of the bulk oxides the electronic and geometric structure of their clean single crystal surfaces and adsorption studies, probing their chemical reactivity, are considered. The review then focuses on the growth and the surface properties of vanadium oxide thin films. This is partitioned into films grown on oxide substrates and those on metal substrates. The interest in the former derives from their importance as supported metal oxide catalysts and the need to understand the two-dimensional overlayer of the so-called “monolayer” catalyst. On the single crystal metal substrates thin oxide layers with high structural order and interesting properties can be prepared. Particular attention is given to ultrathin vanadium oxide layers, so-called nano-layers, where novel phases, stabilised by the substrate, form.     

Pulsed Laser Deposition as a Tool for the Development of All Solid-State Microbatteries

All-solid-state lithium ion batteries (LIB) are currently the most promising technology for next generation electrochemical energy storage. Many efforts have been devoted in the past years to improve performance and safety of these devices. Nevertheless, issues regarding chemical and mechanical stability of the different components still hinder substantial improvements. Pulsed laser deposition (PLD) has proved to be an outstanding technique for the deposition of thin films of materials of interest for the fabrication of LIB. Thanks to its versatility and possible fine tuning of the thin film properties, PLD promises to be a very powerful tool for the fabrication of model systems which would allow to study in detail material properties and mechanisms contributing to LIB degradation. Nevertheless, PLD presents difficulties in the deposition of LIB components, mainly due to the presence of elements with large difference of atomic mass in their chemical composition. In this review, we report the main challenges and solution strategies used for the deposition through PLD of complex oxides thin films for LIB.