Rationally Designed Three‐Layered Cu2S@Carbon@MoS2 Hierarchical Nanoboxes for Efficient Sodium Storage

Hybrid materials, integrating the merits of individual components, are ideal structures for efficient sodium storage. However, the construction of hybrid structures with decent physical/electrochemical properties is still challenging. Now, the elaborate design and synthesis of hierarchical nanoboxes composed of three‐layered Cu₂S@carbon@MoS₂ as anode materials for sodium‐ion batteries is reported. Through a facile multistep template‐engaged strategy, ultrathin MoS₂ nanosheets are grown on nitrogen‐doped carbon‐coated Cu₂S nanoboxes to realize the Cu₂S@carbon@MoS₂ configuration. The design shortens the diffusion path of electrons/Na⁺ ions, accommodates the volume change of electrodes during cycling, enhances the electric conductivity of the hybrids, and offers abundant active sites for sodium uptake. By virtue of these advantages, these three‐layered Cu₂S@carbon@MoS₂ hierarchical nanoboxes show excellent electrochemical properties in terms of decent rate capability and stable cycle life.     

Bowl‐like SnO2@Carbon Hollow Particles as an Advanced Anode Material for Lithium‐Ion Batteries

Despite the great advantages of hollow structures as electrodes for lithium‐ion batteries, one apparent common drawback which is often criticized is their compromised volumetric energy density due to the introduced hollow interior. Here, we design and synthesize bowl‐like SnO₂@carbon hollow particles to reduce the excessive hollow interior space while retaining the general advantages of hollow structures. As a result, the tap density can be increased about 30 %. The as‐prepared bowl‐like SnO₂@carbon hollow particles with conformal carbon support exhibit excellent lithium storage properties in terms of high capacity, stable cyclability and excellent rate capability.     

Cube‐in‐Cube Hollow Cu9S5 Nanostructures with Enhanced Photocatalytic Activities in Solar H2 Evolution

Hydrogen produced from water under solar energy is an ideal clean energy source, and the efficiency of hydrogen production usually depends on the catalytic systems based on new compounds and/or a unique nanostructure. Herein, well‐defined cube‐in‐cube hollow Cu₉S₅ nanostructures have been successfully prepared with Cu₂O nanocubes and CS₂ as precursors, and single‐shell hollow Cu₉S₅ nanocubes could be obtained by replacing CS₂ with Na₂S. The formation mechanism of cube‐in‐cube hollow nanostructures has been proposed based on the Kirkendell effect and an outward self‐assembly process. Further studies revealed that the cube‐in‐cube hollow Cu₉S₅ nanostructures exhibited better photocatalytic activity toward solar H₂ evolution and would be a promising photocatalyst in the solar hydrogen industry.     

Hierarchical Microboxes Constructed by SnS Nanoplates Coated with Nitrogen‐Doped Carbon for Efficient Sodium Storage

The design and synthesis of hierarchical microboxes, assembled from SnS nanoplates coated with nitrogen‐doped carbon (NC) as an anode material for sodium‐ion batteries, is demonstrated. The template‐engaged multistep synthesis of the SnS@NC microboxes involves sequential phase transformation, polydopamine coating, and thermal annealing in N₂. The SnS@NC composite with two‐dimensional nano‐sized subunits rationally integrates several advantages including shortening the diffusion path of electrons/Na⁺ ions, improving electric conductivity, and alleviating volume variation of the electrode material. As a result, the SnS@NC microboxes show efficient sodium storage performance with high capacity, good cycling stability, and excellent rate capability.     

Nitrogen‐Doped Carbon Embedded MoS2 Microspheres as Advanced Anodes for Lithium‐ and Sodium‐Ion Batteries

Rational design and synthesis of advanced anode materials are extremely important for high‐performance lithium‐ion and sodium‐ion batteries. Herein, a simple one‐step hydrothermal method is developed for fabrication of N‐C@MoS₂ microspheres with the help of polyurethane as carbon and nitrogen sources. The MoS₂ microspheres are composed of MoS₂ nanoflakes, which are wrapped by an N‐doped carbon layer. Owing to its unique structural features, the N‐C@MoS₂ microspheres exhibit greatly enhanced lithium‐ and sodium‐storage performances including a high specific capacity, high rate capability, and excellent capacity retention. Additionally, the developed polyurethane‐assisted hydrothermal method could be useful for the construction of many other high‐capacity metal oxide/sulfide composite electrode materials for energy storage.     

纳米硫化铜颗粒自组装为球、空心球和线形结构

用水和乙二醇混合物为溶剂,应用溶剂热合成方法制备了由纳米颗粒自组装的球、空心球和线形结构的铜的硫化物,如 Cu7S4, Cu1.8S, Cu1.81S 和 Cu2S。 考查了溶剂组成（水含量的变化）、反应时间、实验温度的变化对所制备样品的形貌和物相结构的影响。研究了其形成机理。结果表明,随着反应时间的变化,首先形成纳米颗粒的铜的硫化物。通过自组装形成线形结构。最后转化为球形或空心球形结构。     

Bimetal‐organic Framework‐derived Co9S8/ZnS@NC Heterostructures for Superior Lithium‐ion Storage

Heterostructure engineering of electrode materials, which is expected to accelerate the ion/electron transport rates driven by a built‐in internal electric field at the heterointerface, offers unprecedented promise in improving their cycling stability and rate performance. Herein, carbon nanotubes with Co₉S₈/ZnS heterostructures embedded in a N‐doped carbon framework (Co₉S₈/ZnS@NC) have been rationally designed via an in‐situ vapor chemical transformation strategy with the aid of thiophene, which not only acted as carbon source for the growth of carbon nanotubes but also as sulfur source for the sulfurization of metal Zn and Co. Density functional theory (DFT) calculation shows an about 3.24 eV electrostatic potential difference between ZnS and Co₉S₈, which results in a strong electrostatic field across the interface that makes electrons transfer from Co₉S₈ to the ZnS side. As expected, a stable cycling performance with reversible capacity of 411.2 mAh g^?1 at 1000 mA g^?1 after 300 cycles, excellent rate capability (324 mAh g^?1 at 2000 A g^?1) and a high percentage of pseudocapacitance contribution (87.5% at 2.2 mv/s) for lithium‐ion batteries (LIBs) are achieved. This work provides a possible strategy for designing multicomponent heterostructural materials for application in energy storage and conversion fields.     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

Boosting the electrochemical performance of Li4Ti5O12 through nitrogen‐doped carbon coating

The poor electronic conductivity restricts the wide applications of Li₄Ti₅O₁₂ as anode materials in Li‐ion batteries. We report a facile approach to fabricate nitrogen‐doped carbon‐coated Li₄Ti₅O₁₂ through carbonizing pyrrole and pyridine at different temperatures. Comparative experiments demonstrated that the carbon content plays a key role in governing the cycling performance and rate capability of Li₄Ti₅O₁₂. The composites with higher carbon content exhibited superior cycling performance, and the composite prepared at 600 °C using pyridine as the carbon source gave the best cycling and rate performance.     

Hierarchical Metal Sulfide/Carbon Spheres: A Generalized Synthesis and High Sodium‐Storage Performance

The development of suitable anode materials is far from satisfactory and is a major scientific challenge for a competitive sodium‐ion battery technology. Metal sulfides have demonstrated encouraging results, but still suffer from sluggish kinetics and severe capacity decay associated with the phase change. Herein we show that rational electrode design, that is, building efficient electron/ion mixed‐conducting networks, can overcome the problems resulting from conversion reactions. A general strategy for the preparation of hierarchical carbon‐coated metal sulfide (MS?C) spheres through thermal sulfurization of metal glycerate has been developed. We demonstrate the concept by synthesizing highly uniform hierarchical carbon coated vanadium sulfide (V₂S₃?C) spheres, which exhibit a highly reversibly sodium storage capacity of 777 mAh g^?1 at 100 mA g^?1, excellent rate capability (410 mAh g^?1 at 4000 mA g^?1), and impressive cycling ability.     

A Low‐Temperature Molecular Precursor Approach to Copper‐Based Nano‐Sized Digenite Mineral for Efficient Electrocatalytic Oxygen Evolution Reaction

In the urge of designing noble metal‐free and sustainable electrocatalysts for oxygen evolution reaction (OER), herein, a mineral Digenite Cu₉S₅ has been prepared from a molecular copper(I) precursor, [{(PyHS)₂Cu^I(PyHS)}₂](OTf)₂ ( 1 ), and utilized as an anode material in electrocatalytic OER for the first time. A hot injection of 1 yielded a pure phase and highly crystalline Cu₉S₅, which was then electrophoretically deposited (EPD) on a highly conducting nickel foam (NF) substrate. When assessed as an electrode for OER, the Cu₉S₅/NF displayed an overpotential of merely 298±3 mV at a current density of 10 mA cm^?2 in alkaline media. The overpotential recorded here supersedes the value obtained for the best reported Cu‐based as well as the benchmark precious‐metal‐based RuO₂ and IrO₂ electrocatalysts. In addition, the choronoamperometric OER indicated the superior stability of Cu₉S₅/NF, rendering its suitability as the sustainable anode material for practical feasibility. The excellent catalytic activity of Cu₉S₅ can be attributed to the formation of a crystalline CuO overlayer on the conductive Cu₉S₅ that behaves as active species to facilitate OER. This study delivers a distinct molecular precursor approach to produce highly active copper‐based catalysts that could be used as an efficient and durable OER electro(pre)catalysts relying on non‐precious metals.     

Polyoxometalate and Resin‐Derived P‐Doped Mo2C@N‐Doped Carbon as a Highly Efficient Hydrogen‐Evolution Reaction Catalyst at All pH Values

A new type of P‐doped Mo₂C coated by N‐doped carbon (P‐Mo₂C@NC) has been successfully prepared by calcining a mixture of H₃[PMo₁₂O₄₀] polyoxometalates (POMs) and urea‐formaldehyde resin under an N₂ atmosphere. Urea‐formaldehyde resin not only serves as the carbon source to ensure carbonization but also facilitates the uniform distribution of POM precursors, which efficiently avoid the aggregation of Mo₂C particles at high temperatures. TEM analysis revealed that the average diameter of the Mo₂C particles was about 10 nm, which is coated by a few‐layer N‐doped carbon sheet. The as‐prepared P‐Mo₂C@NC displayed excellent hydrogen‐evolution reaction (HER) performance and long‐term stability in all pH environments. To reach a current density of 10 mA cm^?2, only 109, 159, and 83 mV were needed for P‐Mo₂C@NC in 0.5 m H₂SO₄ (pH 0), 0.1 m phosphate buffer (pH 7), and 1 m KOH (pH 14), respectively. This could provide a high‐yield and low‐cost method to prepare uniform nanosized molybdenum carbides with highly efficient and stable HER performance.     

Double‐Helix Structure in Carrageenan–Metal Hydrogels: A General Approach to Porous Metal Sulfides/Carbon Aerogels with Excellent Sodium‐Ion Storage

The metal sulfide‐carbon nanocomposite is a new class of anode material for sodium ion batteries, but its development is restricted by its relative poor rate ability and cyclic stability. Herein, we report the use of double‐helix structure of carrageenan–metal hydrogels for the synthesis of 3D metal sulfide (M_xS_y) nanostructure/carbon aerogels (CAs) for high‐performance sodium‐ion storage. The method is unique, and can be used to make multiple M_xS_y/CAs (such as FeS/CA, Co₉S₈/CA, Ni₃S₄/CA, CuS/CA, ZnS/CA, and CdS/CA) with ultra‐small nanoparticles and hierarchical porous structure by pyrolyzing the carrageenan–metal hydrogels. The as‐prepared FeS/CA exhibits a high reversible capacity and excellent cycling stability (280 mA h^?1 at 0.5 A g^?1 over 200 cycles) and rate performance (222 mA h^?1 at 5 A g^?1) when used as the anode material for sodium‐ion batteries. The work shows the value of biomass‐derived metal sulfide–carbon heterostuctures in sodium‐ion storage.     

Long‐Life Room‐Temperature Sodium–Sulfur Batteries by Virtue of Transition‐Metal‐Nanocluster–Sulfur Interactions

Room‐temperature sodium–sulfur (RT‐Na/S) batteries hold significant promise for large‐scale application because of low cost of both sodium and sulfur. However, the dissolution of polysulfides into the electrolyte limits practical application. Now, the design and testing of a new class of sulfur hosts as transition‐metal (Fe, Cu, and Ni) nanoclusters (ca. 1.2 nm) wreathed on hollow carbon nanospheres (S@M‐HC) for RT‐Na/S batteries is reported. A chemical couple between the metal nanoclusters and sulfur is hypothesized to assist in immobilization of sulfur and to enhance conductivity and activity. S@Fe‐HC exhibited an unprecedented reversible capacity of 394 mAh g^?1 despite 1000 cycles at 100 mA g^?1, together with a rate capability of 220 mAh g^?1 at a high current density of 5 A g^?1. DFT calculations underscore that these metal nanoclusters serve as electrocatalysts to rapidly reduce Na₂S₄ into short‐chain sulfides and thereby obviate the shuttle effect.     

Boron‐Doped,Carbon‐Coated SnO2/Graphene Nanosheets for Enhanced Lithium Storage

Heteroatom doping is an effective method to adjust the electrochemical behavior of carbonaceous materials. In this work, boron‐doped, carbon‐coated SnO₂/graphene hybrids (BCTGs) were fabricated by hydrothermal carbonization of sucrose in the presence of SnO₂/graphene nanosheets and phenylboronic acid or boric acid as dopant source and subsequent thermal treatment. Owing to their unique 2D core–shell architecture and B‐doped carbon shells, BCTGs have enhanced conductivity and extra active sites for lithium storage. With phenylboronic acid as B source, the resulting hybrid shows outstanding electrochemical performance as the anode in lithium‐ion batteries with a highly stable capacity of 1165 mA h g^?1 at 0.1 A g^?1 after 360 cycles and an excellent rate capability of 600 mA h g^?1 at 3.2 A g^?1, and thus outperforms most of the previously reported SnO₂‐based anode materials.     

One‐Pot Fabrication of Hierarchical Nanosheet‐Based TiO2–Carbon Hollow Microspheres for Anode Materials of High‐Rate Lithium‐Ion Batteries

Hierarchical and hollow nanostructures have recently attracted considerable attention because of their fantastic architectures and tunable property for facile lithium ion insertion and good cycling stability. In this study, a one‐pot and unusual carving protocol is demonstrated for engineering hollow structures with a porous shell. Hierarchical TiO₂ hollow spheres with nanosheet‐assembled shells (TiO₂ NHS) were synthesized by the sequestration between the titanium source and 2,2′‐bipyridine‐5,5′‐dicarboxylic acid, and kinetically controlled etching in trifluoroacetic acid medium. In addition, annealing such porous nanostructures presents the advantage of imparting carbon‐doped functional performance to its counterpart under different atmospheres. Such highly porous structures endow very large specifics surface area of 404 m² g^?1 and 336 m² g^?1 for the as‐prepared and calcination under nitrogen gas. C/TiO₂ NHS has high capacity of 204 mA h g^?1 at 1 C and a reversible capacity of 105 mA h g^?1 at a high rate of 20 C, and exhibits good cycling stability and superior rate capability as an anode material for lithium‐ion batteries.     

Polymer‐Templated Formation of Polydopamine‐Coated SnO2 Nanocrystals: Anodes for Cyclable Lithium‐Ion Batteries

Well‐controlled nanostructures and a high fraction of Sn/Li₂O interface are critical to enhance the coulombic efficiency and cyclic performance of SnO₂‐based electrodes for lithium‐ion batteries (LIBs). Polydopamine (PDA)‐coated SnO₂ nanocrystals, composed of hundreds of PDA‐coated “corn‐like” SnO₂ nanoparticles (diameter ca. 5 nm) decorated along a “cob”, addressed the irreversibility issue of SnO₂‐based electrodes. The PDA‐coated SnO₂ were crafted by capitalizing on rationally designed bottlebrush‐like hydroxypropyl cellulose‐graft‐poly (acrylic acid) (HPC‐g ‐PAA) as a template and was coated with PDA to construct a passivating solid‐electrolyte interphase (SEI) layer. In combination, the corn‐like nanostructure and the protective PDA coating contributed to a PDA‐coated SnO₂ electrode with excellent rate capability, superior long‐term stability over 300 cycles, and high Sn→SnO₂ reversibility.     

Hollow Nanotubes of N‐Doped Carbon on CoS

Low‐cost, single‐step synthesis of hollow nanotubes of N‐doped carbon deposited on CoS is enabled by the simultaneous use of three functionalities of polyacrylonitrite (PAN) nanofibers: 1) a substrate for loading active materials, 2) a sacrificial template for creating hollow tubular structures, and 3) a precursor for in situ nitrogen doping. The N‐doped carbon in hollow tubes of CoS provides a high‐capacity anode of long cycle life for a rechargeable Li‐ion or Na‐ion battery cell that undergoes the conversion reaction 2 A⁺+2 e^?+CoS →Co+A₂S with A=Li or Na.     

Synthesis of Cobalt Sulfide/Sulfur Doped Carbon Nanocomposites with Efficient Catalytic Activity in the Oxygen Evolution Reaction

Cobalt sulfide/sulfur doped carbon composites (Co₉S₈/S‐C) were synthesized by calcining a rationally designed sulfur‐containing cobalt coordination complex in an inert atmosphere. From the detailed transmission electron microscopy (TEM) and X‐ray photoelectron spectroscopy (XPS) analyses, the electrocatalytically active Co₉S₈ nanoparticles were clearly obtained and combined with the thin sulfur doped carbon layers. Electrochemical data showed that Co₉S₈/S‐C had a good activity and long‐term stability in catalyzing oxygen evolution reaction in alkaline electrolyte, even better than the traditional RuO₂ electrocatalyst. The excellent electrocatalytic activity of Co₉S₈/S‐C was mainly attributed to the synergistic effect between the Co₉S₈ catalyst which contributed to the oxygen evolution reaction and the sulfur doped carbon layer which facilitated the adsorption of reactants, prevented the Co₉S₈ particles from aggregating and served as the electrically conductive binder between each component.     

Carbon‐Coated LiTi2(PO4)3: An Ideal Insertion Host for Lithium‐Ion and Sodium‐Ion Batteries

We report the extraordinary performance of carbon‐coated sodium super ion conductor (NASICON)‐type LiTi₂(PO₄)₃ as an ideal host matrix for reversible insertion of both Li and Na ions. The NASICON‐type compound was prepared by means of a Pechini‐type polymerizable complex method and was subsequently carbon coated. Several characterization techniques such as XRD, thermogravimetric analysis (TGA), field‐emission (FE) SEM, TEM, and Raman analysis were used to study the physicochemical properties. Both guest species underwent a two‐phase insertion mechanism during the charge/discharge process that was clearly evidenced from galvanostatic and cyclic voltammetric studies. Unlike that of Li (≈1.5 moles of Li), Na insertion exhibits better reversibility (≈1.59 moles of Na) while experiencing a slightly higher capacity fade (≈8 % higher than Li) and polarization (780 mV) than Li. However, excellent rate capability profiles were noted for Na insertion relative to its counterpart Li. Overall, the Na insertion properties were found to be superior relative to Li insertion, which makes carbon‐coated NASICON‐type LiTi₂(PO₄)₃ hosts attractive for the development of next‐generation batteries.