Theoretical Studies on the Diastereoselectivity in the Lewis Acid Catalyzed Carbonyl?Ene Reaction: A Fundamental Role of Electrostatic Interaction

Lewis acids affect reactivity, selectivity, and mechanism in the carbonyl‐ene reaction. The diastereoselectivity in the glyoxylate‐ene reaction depends on Lewis acids. While the SnCl₄‐promoted reaction can be achieved with a high level of anti‐selectivity, the use of Al reagents leads to a high syn‐selectivity. The origin of the Lewis acid dependency of the diastereoselectivity in the carbonyl? ene reaction of (E)‐but‐2‐ene with glyoxylate was theoretically studied (HF/6‐31G*) from the point of view of differences and similarities between the ene and the Diels–Alder reactions. Though it has been widely accepted that the endo‐preference would be less obvious in the ene reaction than in the Diels–Alder reaction, our ab initio molecular studies showed that the electrostatic interaction between carbonyl O‐atom lone pair and cationic allylic central C‐atom of ene component exists in the Lewis acid‐promoted carbonyl–ene reaction to affect the transition‐state conformation. It is illustrated that such an electrostatic interaction is essential to control the exo/endo‐selectivity, which provides the diastereoselectivity of the product in the transition state of the Lewis acid promoted carbonyl? ene reaction.     

Diastereo‐Divergent Synthesis of Saturated Azaheterocycles Enabled by tBuOK‐Mediated Hydroamination of Alkenyl Hydrazones

Diastereo‐divergent synthesis of saturated azaheterocycles has been achieved by tBuOK‐mediated hydroamination of alkenyl hydrazones. DFT calculations suggested that the cation–π interactions between a potassium cation and aryl substituents on hydrazones give rise to 2,5‐cis selectivity in pyrrolidines, which were synthesized by the reaction of γ,δ‐unsaturated N‐benzyl hydrazones. By contrast, 2,5‐trans selectivity was observed when an isopropyl group was used as the substituent on hydrazones. An unusual 2,6‐trans selectivity in piperidine formation was also realized using the present strategy.     

Stereoselective Cyclopropanation of 2‐[(S)‐(4‐Methylphenyl)sulfinyl]cyclopent‐2‐en‐1‐one with Sulfur Ylides and α‐Halo Carbanions. Preliminary Communication

The cyclopropanation of the title compound (S)‐ 2 with various sulfur ylides has been examined. The reaction with methylenesulfonium ylides gave the corresponding cyclopropanes 4 with low diastereoselectivity. The formation of the second product 5 arising from the subsequent methylenation of the CO group was also observed. A clean cyclopropanation of (S)‐ 2 took place with ethyl (dimethylsulfanylidene)acetate affording the cyclopropanes 6 , with high π‐facial selectivity, but low endo/exo ratio. A high endo/exo selectivity, but low π‐facial selectivity was observed in the reaction of (S)‐ 2 with (2‐ethoxy‐2‐oxoethyl)(diphenyl)sulfonium tetrafluoroborate. The use of α‐bromoacetate carbanion as the cyclopropanation reagent resulted in the formation of 6 with very high facial and endo/exo‐selectivity. In a proposed explanation of the stereochemical outcome of the cyclopropanations investigated, the ground‐state conformation of the sulfoxide 2 and the transition‐state structure of the initial addition step were taken into account.     

Selective synthesis of poly(p‐oxybenzoyl) by fractional polycondensation: Enhancement of selectivity by shearing

The influence of shear flow, especially the timing for the application of shearing, was examined to enhance the selectivity for the preparation of poly(p‐oxybenzoyl) (Pp‐OB) by using hydrodynamically induced phase separation during polymerization of 4‐(4‐acetoxybenzoyloxy)benzoic acid (p‐ABAD) and m‐acetoxybenzoic acid (m‐ABA). The polymers containing few m‐oxybenzoyl (m‐OB) moieties were obtained as precipitates even at high content of m‐OB moiety in feed (χ_f) under shear flow. The content of m‐OB moiety in the precipitates (χ_p) prepared under shearing throughout the polymerization at the shear rate (γ) of 489 s^?1 was 6.3 mol % even at χ_f of 60 mol %. Especially, the Pp‐OB was obtained as the precipitates at χ_f of less than 50 mol %. The timing of the application of the shearing influenced the selectivity significantly, and the shearing just after the precipitation of the oligomers started was quite efficient to enhance the selectivity more. The χ_p of the precipitates prepared with shearing at γ of 489 s^?1 just after the precipitation was only 3.9 mol % even at χ_f of 60 mol %. The shear flow reduced the difference in the reactivity between p‐ABAD and m‐ABA, resulting in the decrease in the selectivity with regard to the formation of p‐oxybenzoyl homo‐oligomer. However, the shear flow enhanced the difference in the miscibility between homo‐oligomers and co‐oligomers. This change in the miscibility by shear flow brought about the more rapid precipitation of homo‐oligomers, leading to the enhancement of the selectivity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chromatographic behavior of a new hybrid type RP material containing silica bonded 1,3‐alternate 25,27‐bis‐[cyanopropyloxy]‐26,28‐bis‐[3‐propyloxy]‐calix[4]arene

A novel 1,3‐alternate 25,27‐bis‐[cyanopropyloxy]‐26,28‐bis‐[3‐propyloxy]‐calix[4]arene‐bonded silica gel stationary phase (CalixPrCN) was prepared and its structure was confirmed by ATR‐FTIR spectroscopy and elemental analysis. The CalixPrCN phase was characterized in terms of its surface coverage, hydrophobic selectivity, aromatic selectivity, shape selectivity, hydrogen bonding capacity, residue metal content, and silanol activity based on Tanaka, Lindner, and SMR 870 test protocols. The effect of the acetonitrile content on the retention and selectivity of the selected neutral, basic, and acidic solutes was studied. The neutral and acidic analytes exhibited classical RP behavior, in which retention time decreases with increasing acetonitrile content. In contrast, basic analytes showed an increase in retention at low and high percentages of acetonitrile, forming “U‐shaped” retention profiles. The new calixarene phase was compared with previously reported 1,3‐alternate 25,27‐bis‐[propyloxy]‐26,28‐bis‐[3‐propyloxy]‐calix[4]arene stationary phase and commercial cyanopropyl column. The results indicate that the CalixPrCN stationary phase behaves like RP packing; however, inclusion complex formation, dipole–dipole, and π–π interactions seem to be involved in the separation process. The selectivity of this phase was demonstrated in separation of polynuclear aromatic hydrocarbons, non‐steroidal anti‐inflammatory drugs, and sulfonamides as analytes.     

Radical trans‐Hydroboration of Alkynes with N‐Heterocyclic Carbene Boranes

Hydroboration of internal alkynes with N‐heterocyclic carbene boranes (NHC‐boranes) occurs to provide stable NHC (E)‐alkenylboranes upon thermolysis in the presence of di‐tert‐butyl peroxide. The E isomer results from an unusual trans‐hydroboration, and the E/Z selectivity is typically high (90:10 or greater). Evidence suggests that this hydroboration occurs by a radical‐chain reaction involving addition of an NHC‐boryl radical to an alkyne to give a β‐NHC‐borylalkenyl radical. Ensuing hydrogen abstraction from the starting NHC‐borane provides the product and returns the starting NHC‐boryl radical. Experiments suggest that the observed trans‐selectivity results from kinetic control in the hydrogen‐transfer reaction.     

meta‐Selective C−H Arylation of Fluoroarenes and Simple Arenes

Fluorine is known to promote ortho‐C?H metalation. Based upon this reactivity, we employed an activated norbornene that traps the ortho‐palladation intermediate and is then relayed to the meta position, leading to meta‐selective C?H arylation of fluoroarenes. Deuterium experiment suggests that this meta‐arylation is initiated by ortho C?H activation and the catalytic cycle is terminated by C‐2 protonation. A dual‐ligand system is crucial for the observed high reactivity and site selectivity. Applying this approach to simple benzene or other arenes also affords arylation products with good yield and site selectivity.     

The synthesis of new 2,4‐diaminofuro[2,3‐d]pyrimidines with 5‐biphenyl,phenoxyphenyl and tricyclic substitutions as dihydrofolate reductase inhibitors

Nonclassical 2,4‐diamino‐5‐substituted furo[2,3‐d]pyrimidines 4a‐i, 5a‐b and 7a‐f were synthesized as extended aromatic ring appended analogs of previously reported antifolates 1a‐b. The extended aromatic system was designed to better interact with a phenylalanine residue (Phe69) of dihydrofolate reductase from the opportunistic pathogen Pneumocystis carinii to afford potent and selective inhibitors of Pneumocystis carinii dihydrofolate reductase. The target compounds were synthesized by nucleophilic displacement of 2,4‐diamino‐5‐(chloromethyl)furo[2,3‐d]pyrimidine 3 with the appropriate aromatic amine or thiol. The compounds were evaluated as inhibitors of dihydrofolate reductase from Pneumocystis carinii and Toxoplasma gondii, and their selectivity was determined using rat liver dihydrofolate reductase as the mammalian reference. In the C8‐N9 bridged series, compound 4e , with a 3‐(2‐methoxydibenzofuran)‐ side chain, exhibited greatest potency and was more than 3 times as selective for Pneumocystis carinii dihydrofolate reductase compared to rat liver dihydrofolate reductase. Compounds 4b and 4c also exhibited selectivity. Compounds in the C8‐S9 bridged series showed comparable potencies, and each showed higher selectivity for Pneumocystis carinii dihydrofolate reductase compared to rat liver dihydrofolate reductase.     

The α‐Glycosidation of Partially Unprotected N‐Acetyl and N‐Glycolyl Sialyl Donors in the Absence of a Nitrile Solvent Effect

The synthesis of α‐sialosides is one of the most difficult reactions in carbohydrate chemistry and is considered to be both a thermodynamically and kinetically disfavored process. The use of acetonitrile as a solvent is an effective solution for the α‐selective glycosidation of N‐acetyl sialic acids. In this report, we report on the α‐glycosidation of partially unprotected N‐acetyl and N‐glycolyl donors in the absence of a nitrile solvent effect. The 9‐O‐benzyl‐N‐acetylthiosialoside underwent glycosidation in CH₂Cl₂ with a good α‐selectivity. On the other hand, the 4,7,8‐O‐triacetyl‐9‐O‐benzyl‐N‐acetylthiosialoside was converted to β‐sialoside as a major product under the same reaction conditions. The results indicate that the O‐acetyl protection of the sialyl donor was a major factor in reducing the α‐selectivity of sialylation. After tuning of the protecting groups of the hydroxy groups at the 4,7,8 position on the sialyl donor, we found that the 9‐O‐benzyl‐4‐O‐chloroacetyl‐N‐acetylthiosialoside underwent sialylation with excellent α‐selectivity in CH₂Cl₂. To demonstrate the utility of the method, straightforward synthesis of α(2,9) disialosides containing N‐acetyl and/or N‐glycolyl groups was achieved by using the two N‐acetyl and N‐glycolyl sialyl donors.     

Controlling the Selectivity of the Surface Plasmon Resonance Mediated Oxidation of p‐Aminothiophenol on Au Nanoparticles by Charge Transfer from UV‐excited TiO2

Although catalytic processes mediated by surface plasmon resonance (SPR) excitation have emerged as a new frontier in catalysis, the selectivity of these processes remains poorly understood. Here, the selectivity of the SPR‐mediated oxidation of p‐aminothiophenol (PATP) employing Au NPs as catalysts was controlled by the choice of catalysts (Au or TiO₂‐Au NPs) and by the modulation of the charge transfer from UV‐excited TiO₂ to Au. When Au NPs were employed as catalyst, the SPR‐mediated oxidation of PATP yielded p,p‐dimercaptobenzene (DMAB). When TiO₂‐Au NPs were employed as catalysts under both UV illumination and SPR excitation, p‐nitrophenol (PNTP) was formed from PATP in a single step. Interestingly, PNTP molecules were further reduced to DMAB after the UV illumination was removed. Our data show that control over charge‐transfer processes may play an important role to tune activity, product formation, and selectivity in SPR‐mediated catalytic processes.     

Diverse meta‐C−H Functionalization of Arenes across Different Linker Lengths

Arenes containing conformationally flexible long alkyl chains have been successfully functionalized at the meta‐position. Good to excellent meta selectivity is achieved for systems with up to 20 atoms between the target C?H bond and the coordinating heteroatom of the directing group. The palladium‐catalyzed functionalization reactions include alkylation, cyanation, olefination, and acetoxylation. The meta selectivity is exclusively governed by the design of flexible pyrimidine‐based scaffolds.     

Coupling selectivity in the radical‐controlled oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) complex

Various effects on the coupling selectivity of the oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) halogeno complex [Cu(tacn)X₂] are described. With respect to the amount of the catalyst and the nature of the halide ion (X) of Cu(tacn)X₂, the coupling selectivity hardly changed. The Cu(tacn) catalyst possessed a turnover number greater than 1860. As the temperature of the reaction and the polarity of the reaction solvent were elevated, the C O coupling at the o‐position increased, but the C C coupling was not involved. For the polymerization in toluene at 80 °C, poly(1,4‐phenylene oxide), obtained as a methanol‐insoluble part, showed the highest number‐average molecular weight of 4000 with a melting point (T_m) of 195 °C. Only a slight change in the coupling selectivity was observed in the presence or absence of hindered amines as the base. Surprisingly, however, the C O selectivity decreased from 100 to 24% with less hindered amines, indicating that the selectivity drastically changed from a preference for C O coupling to a preference for C C coupling. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4792–4804, 2000     

Ruthenium(II)‐Catalyzed C−H Difluoromethylation of Ketoximes: Tuning the Regioselectivity from the meta to the para Position

A highly para‐selective C_Ar?H difluoromethylation of ketoxime ethers under ruthenium catalysis has been developed. A wide variety of ketoxime ethers are compatible with the reaction, which leads to the corresponding para‐difluoromethylated products in moderate to good yield. A mechanistic study clearly showed that chelation‐assisted cycloruthenation is the key factor in the para selectivity of the difluoromethylation of ketoxime ethers. Density functional theory was used to gain a theoretical understanding of the para selectivity.#     

1,3‐Dipolar Cycloaddition Reactions Leading to the Synthesis of New 2,3,5‐Triaryl‐4H,2,3,3a,5,6,6a‐hexahydropyrrolo[3,4‐d]isoxazole‐4,6‐diones

Cycloaddition of C,N‐diphenylnitrones 1 to N‐aryl maleimides 2 afforded two diastereomeric isoxazolidines with high selectivity. The structure and steric configuration of the adducts have been assigned on the basis of ¹H NMR, ¹H NMR COSY, ¹³C NMR and IR spectroscopy. The π–π stacking interactions between maleimide's and nitrone's aromatic rings during the 1,3‐dipolar cycloaddition were assumed to control the exo–endo selectivity of the reaction. Thus, the exo–endo ratio depends upon the position of the substituent present on the C‐phenyl ring of the C,N‐diphenylnitrones.     

Hypervalent Iodine in Synthesis. Part 86

N‐Arylation of uracil and its derivatives 2 with diaryliodonium salts 1 was investigated in order to explore a new synthetic methodology associated with N‐aryluracil derivatives. In the presence of K₂CO₃, the copper‐catalyzed arylation gave N¹,N³‐diarylation products with high selectivity and in good yields (Table 2). However, the use of NaOAc as the base in the copper‐catalyzed arylation of 6‐methyluracil ( 2a ) resulted in N³‐arylation products with high selectivity, and, in the copper‐catalyzed arylation of uracil ( 2b ) or 5‐methyluracil (=thymine; 2c ), N¹‐arylation products were the major products (Table 3).     

Origins of the Enantio‐ and N/O Selectivity in the Primary‐Amine‐Catalyzed Hydroxyamination of 1,3‐Dicarbonyl Compounds with In‐Situ‐Formed Nitrosocarbonyl Compounds: A Theoretical Study

Chemoselective control over N/O selectivity is an intriguing issue in nitroso chemistry. Recently, we reported an unprecedented asymmetric α‐amination reaction of β‐ketocarbonyl compounds that proceeded through the catalytic coupling of enamine carbonyl groups with in‐situ‐generated carbonyl nitroso moieties. This process was facilitated by a simple chiral primary and tertiary diamine that was derived from tert‐leucine. This reaction featured high chemoselectivity and excellent enantioselectivity for a broad range of substrates. Herein, a computational study was performed to elucidate the origins of the enantioselectivity and N/O regioselectivity. We found that a bidentate hydrogen‐bonding interaction between the tertiary N⁺? H and nitrosocarbonyl groups accounted for the high N selectivity, whilst the enantioselectivity was determined by Si‐facial attack on the (E)‐ and (Z)‐enamines in a Curtin–Hammett‐type manner. The bidentate hydrogen‐bonding interaction with the nitrosocarbonyl moieties reinforced the facial selectivity in this process.     

Separation of single‐walled carbon nanotubes with aromatic group functionalized polymethacrylates and building blocks contribution to the enrichment

We previously showed that in N,N‐dimethylformamide (DMF), poly(9‐anthracenylmethyl methacrylate) (PAMMA) and poly(2‐naphthylmethacrylate) selectively disperse semiconducting and metallic single‐walled carbon nanotubes (SWNTs), respectively. We have also proposed a new noncovalent polymer interaction based on photon induced dipole–dipole interaction to account for the metallicity‐based selectivity. In this article, we investigate two other polymethacrylates, that is, poly(benzyl methacrylate) (PBMA) and poly(methylmethacrylate)‐co‐(9‐anthracenylmethyl acrylate) (PMMA‐c‐PAMA) in the light of our previously proposed photon‐induced dipole–dipole interaction. We find that PBMA and PMM‐c‐PAMMA in DMF show no metallicity selectivity. The different selective behavior of the four polymers in DMF manifests the decisive influence of the side aromatic group in determining their metallicity selectivity. The nonpreferential energy transfer from PMMA‐c‐PAMA to SWNTs and the nonoverlap of PBMA fluorescence (in the ultraviolet range) with nanotube absorption account for their nonselectivity of specific nanotube species. Further, the parallel relationship between the diameters of extracted tube species and the affinity between polymers and solvents suggests the leading role of the polymeric conformation on the diameter selectivity. A sufficient (i.e., 2 weeks) standing time of the SWNTs solution after sonication, during which the polymers presumably optimize their conformation to the SWNTs, was found to be essential to the enrichment. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Heteroatom‐Guided Torquoselective Olefination of α‐Oxy and α‐Amino Ketones via Ynolates

Ynolates were found to react with α‐alkoxy‐, α‐siloxy‐, and α‐aryloxyketones at room temperature to afford tetrasubstituted olefins with high Z selectivity. Since the geometrical selectivity was determined in the ring opening of the β‐lactone enolate intermediates, the torquoselectivity was controlled by the ethereal oxygen atoms. From experimental and theoretical studies, the high Z selectivity is induced by orbital and steric interactions rather than by chelation. In a similar manner, α‐dialkylamino ketones provided olefins with excellent Z selectivity. These products can be easily converted into multisubstituted butenolides and γ‐butyrolactams in good yield.     

Stereocontrolled Annulations of Indolo[2,3‐a]quinolizidine‐Derived Lactams with a Silylated Nazarov Reagent: Access to Allo and Epiallo Yohimbine‐Type Derivatives

The facial selectivity of double Michael addition reactions of the silylated Nazarov reagent 4 to unsaturated indolo[2,3‐a]quinolizidine lactams 3 has been studied. Pentacyclic 3‐H/15‐H trans adducts 5 are generated from N_ind‐unsubstituted lactams, but the corresponding cis isomers 6 are formed when the indole nitrogen has a tert‐butyloxycarbonyl (Boc) substituent. This reversal in the facial selectivity of the annulation has been rationalized by means of theoretical calculations, which indicate that the initial nucleophilic attack under stereoelectronic control is hampered by the presence of the bulky Boc group. The synthetic usefulness of the pentacyclic Nazarov‐derived adducts is demonstrated by their conversion into allo and epiallo yohimbine‐type targets.     

Synthesis of Novel Nonpeptidic Thrombin Inhibitors

A novel class of nonpeptidic, active, and selective thrombin inhibitors has resulted from X‐ray‐structure‐based design and subsequent improvement of the initial lead molecules. These inhibitors possess a bi‐ or tricyclic central core structure with attached side chains to reach the three binding pockets (selectivity S1 pocket, distal D pocket, and proximal P pocket) present in the active site of the enzyme. The key step in the preparation of these compounds is the 1,3‐dipolar cycloaddition between an azomethine ylide, prepared in situ by the decarboxylative method from an aromatic aldehyde and an α‐amino acid, with an N‐substituted maleimide (e.g., see Schemes 1 and 2). All potent inhibitors contain an amidinium residue in the side chain for incorporation into the S1 pocket, which was introduced in the last step of the synthesis by a Pinner reaction. The compounds were tested in biological assays for activity against thrombin and the related serine protease trypsin. The first‐generation lead compounds (±)‐ 11 and (±)‐ 19 (Scheme 1) with a bicyclic central scaffold showed K_i values for thrombin inhibition of 18 μM and 0.67 μM , respectively. Conformationally more restricted second‐generation analogs (Scheme 2) were more active ((±)‐ 22i : K_i=90 nM (Table 1)); yet the selectivity for thrombin over trypsin remained weak. In the third‐generation compounds, a small lipophilic side chain for incorporation into the hydrophobic P pocket was introduced (Schemes 7 and 8). Since this pocket is present in thrombin but not in trypsin, an increase in binding affinity was accompanied by an increase in selectivity for thrombin over trypsin. The most selective inhibitor (K_i=13 nM , 760‐fold selectivity for thrombin over trypsin; Table 2) was (±)‐ 1 with an i‐Pr group for incorporation into the P pocket. Optical resolution of (±)‐ 1 (Scheme 9) provided (+)‐ 1 with a K_i value of 7 nM and a 740‐fold selectivity, whereas (−)‐ 1 was 800‐fold less active (K_i=5.6 μM , 21‐fold selectivity). The absolute configuration of the stronger‐binding enantiomer was assigned based on the X‐ray crystal structure of the complex formed between thrombin and this inhibitor. Compound (+)‐ 1 mimics the natural thrombin substrate, fibrinogen, which binds to the enzyme with the Ph group of a phenylalanine (piperonyl in (+)‐ 1 ) in the distal D pocket, with the i‐Pr group of a valine (i‐Pr in (+)‐ 1 ) in the proximal P pocket, and with a guanidinium side chain of an arginine residue (phenylamidinium group in (+)‐ 1 ) in the selectivity S1 pocket of thrombin. A series of analogs of (±)‐ 1 with the phenylamidinium group replaced by aromatic and aliphatic rings bearing OH or NH₂ groups (Schemes 10 – 14) were not effectively bound by thrombin. A number of X‐ray crystal‐structure analyses of free inhibitors confirmed the high degree of preorganization of these compounds in the unbound state. Since all inhibitors prefer similar modes of association with thrombin, detailed information on the strength of individual intermolecular bonding interactions and their incremental contribution to the overall free energy of complexation was generated in correlative binding and X‐ray studies. The present study demonstrates that defined mutations in highly preorganized inhibitors provide an attractive alternative to site‐directed mutagenesis in exploring molecular‐recognition phenomena at enzyme active sites.