Water‐Mediated Synthesis of a Superionic Halide Solid Electrolyte

To promote the development of solid‐state batteries, polymer‐, oxide‐, and sulfide‐based solid‐state electrolytes (SSEs) have been extensively investigated. However, the disadvantages of these SSEs, such as high‐temperature sintering of oxides, air instability of sulfides, and narrow electrochemical windows of polymers electrolytes, significantly hinder their practical application. Therefore, developing SSEs that have a high ionic conductivity (>10^?3 S cm^?1), good air stability, wide electrochemical window, excellent electrode interface stability, low‐cost mass production is required. Herein we report a halide Li⁺ superionic conductor, Li₃InCl₆, that can be synthesized in water. Most importantly, the as‐synthesized Li₃InCl₆ shows a high ionic conductivity of 2.04×10^?3 S cm^?1 at 25 °C. Furthermore, the ionic conductivity can be recovered after dissolution in water. Combined with a LiNi_0.8Co_0.1Mn_0.1O₂ cathode, the solid‐state Li battery shows good cycling stability.     

Atomic‐Scale Visualization of the Stepwise Metal‐Mediated Dehalogenative Cycloaddition Reaction Pathways: Competition between Radicals and Organometallic Intermediates

Dehalogenative cycloaddition reaction is a powerful strategy to generate new ring scaffolds with π‐conjugated features on a surface, and thus holds great promise toward atomically precise electronic devices or nanomaterials. The ortho‐dihalo substitution provides a good strategy to realize cycloaddition. However, the limited understanding of intermediate states involved hinders mechanistic exploration for further precise design and optimization of reaction products. Now, the evolutions of competing surface‐stabilized radicals and organometallic intermediates in real space were visualized toward the formation of dominant conjugated four‐membered ring connections. From the interplay of scanning tunneling microscopy and density functional theory calculations, the stepwise metal‐mediated dehalogenative cycloaddition pathway is elucidated both experimentally and theoretically. The results provide fundamental insights into the intermediate states involved in on‐surface synthesis.     

Steering Surface Reaction Dynamics with a Self‐Assembly Strategy: Ullmann Coupling on Metal Surfaces

Ullmann coupling of 4‐bromobiphenyl thermally catalyzed on Ag(111), Cu(111), and Cu(100) surfaces was scrutinized by scanning tunneling microscopy as well as theoretical calculations. Detailed experimental evidence showed that initial formation of organometallic intermediates on the surface, as self‐assembled structures or sparsely dispersed species, is determined by the subsequent reaction pathway. Specifically, the assembled organometallic intermediates at full coverage underwent a single‐barrier process to directly convert into the final coupling products, while the sparsely dispersed intermediates at low coverage went through a double‐barrier process via newly identified clover‐shaped intermediates prior to formation of the final coupling products. These findings demonstrate that a self‐assembly strategy can efficiently steer surface reaction pathways and dynamics.     

Evidence of Structure Sensitivity in the Fischer–Tropsch Reaction on Model Cobalt Nanoparticles by Time‐Resolved Chemical Transient Kinetics

The Fischer–Tropsch process, or the catalytic hydrogenation of carbon monoxide (CO), produces long chain hydrocarbons and offers an alternative to the use of crude oil for chemical feedstocks. The observed size dependence of cobalt (Co) catalysts for the Fischer–Tropsch reaction was studied with colloidally prepared Co nanoparticles and a chemical transient kinetics reactor capable of measurements under non‐steady‐state conditions. Co nanoparticles of 4.3 nm and 9.5 nm diameters were synthesized and tested under atmospheric pressure conditions and H₂/CO=2. Large differences in carbon coverage (Θ_C) were observed for the two catalysts: the 4.3 nm Co catalyst has a Θ_C less than one while the 9.5 nm Co catalyst supports a Θ_C greater than two. The monomer units present on the surface during reaction are identified as single carbon species for both sizes of Co nanoparticles, and the major CO dissociation site is identified as the B₅‐B geometry. The difference in activity of Co nanoparticles was found to be a result of the structure sensitivity caused by the loss of these specific types of sites at smaller nanoparticle sizes.     

Au130−xAgx Nanoclusters with Non‐Metallicity: A Drum of Silver‐Rich Sites Enclosed in a Marks‐Decahedral Cage of Gold‐Rich Sites

The synthesis and structure of atomically precise Au_130?xAg_x (average x=98) alloy nanoclusters protected by 55 ligands of 4‐tert‐butylbenzenethiolate are reported. This large alloy structure has a decahedral M₅₄ (M=Au/Ag) core. The Au atoms are localized in the truncated Marks decahedron. In the core, a drum of Ag‐rich sites is found, which is enclosed by a Marks decahedral cage of Au‐rich sites. The surface is exclusively Ag?SR; X‐ray absorption fine structure analysis supports the absence of Au?S bonds. The optical absorption spectrum shows a strong peak at 523 nm, seemingly a plasmon peak, but fs spectroscopic analysis indicates its non‐plasmon nature. The non‐metallicity of the Au_130?xAg_x nanocluster has set up a benchmark to study the transition to metallic state in the size evolution of bimetallic nanoclusters. The localized Au/Ag binary architecture in such a large alloy nanocluster provides atomic‐level insights into the Au?Ag bonds in bimetallic nanoclusters.     

Hydrogen Peroxide Assisted Synthesis of Highly Luminescent Sulfur Quantum Dots

An H₂O₂‐assisted top‐down approach is used to synthesize brightly luminescent, color‐tunable sulfur quantum dots (SQDs), with a photoluminescence quantum yield of up to 23 %. The formation of SQDs involves dissolution of bulk sulfur powder into small particles in an alkaline environment in the presence of polyethylene glycol, followed by H₂O₂‐assisted etching of polysulfide species, which has the advantage of the passivation of surface states. This synthetic strategy allows us to simultaneously control the final size of SQDs, to tune their emission color, and to improve their emission quantum yield by eliminating surface traps. Down‐conversion white light emitting diodes were also fabricated using blue emissive SQDs and orange emissive copper nanoclusters, with CIE color coordinates of (0.33, 0.32) and a high color rendering index of 91. The water‐soluble, highly luminescent SQDs are promising luminescent materials that can be produced from abundant precursor materials.     

Synthesis of the Unknown Indeno[1,2‐a]fluorene Regioisomer: Crystallographic Characterization of Its Dianion

Of the five possible indenofluorene regioisomers, examples of a fully conjugated indeno[1,2‐a ]fluorene scaffold have so far remained elusive. This work reports the preparation and characterization of 7,12‐dimesitylindeno[1,2‐a ]fluorene as a highly reactive species. Experimental and computational data support the notion of a molecule with pronounced diradical character that exists in a triplet ground state. As such, both NICS and ACID calculations suggest that the indeno[1,2‐a ]fluorene scaffold is weakly Baird aromatic. Reduction of the unstable red solid with Cs metal produces the dianion of the title compound, from which single crystals could be obtained and X‐ray data acquired, thus fully corroborating the proposed indeno[1,2‐a ]fluorene hydrocarbon core.     

Controlled Growth of CH3NH3PbBr3 Perovskite Nanocrystals via a Water–Oil Interfacial Synthesis Method

Fundamental insights into the reaction kinetics of organic–inorganic lead halide perovskite nanocrystals (LHP NCs) are still limited due to their ultrafast formation rate. Herein, we develop a water–oil interfacial synthesis of MAPbBr₃ NCs (MA=CH₃NH₃⁺), which prolongs the reaction time to tens of minutes. This method makes it possible to monitor in situ the formation process of MAPbBr₃ NCs and observe successive spectral evolutions from 438 to 534 nm in a single reaction by extending reaction time. The implementation of this method depends on reducing the formation rate of PbBr₆^4? octahedra and the diffusion rate of MA. The formation of PbBr₆^4? is a rate‐determining step, and the biphasic system offers a favorable reaction condition to control the mass transfer of MA. The effects of temperature and concentration of precursor and ligand are investigated in detail.