Lithium-ion conducting electrolyte salts for lithium batteries

This paper presents an overview of the various types of lithium salts used to conduct Li(+) ions in electrolyte solutions for lithium rechargeable batteries. More emphasis is paid towards lithium salts and their ionic conductivity in conventional solutions, solid-electrolyte interface (SEI) formation towards carbonaceous anodes and the effect of anions on the aluminium current collector. The physicochemical and functional parameters relevant to electrochemical properties, that is, electrochemical stabilities, are also presented. The new types of lithium salts, such as the bis(oxalato)borate (LiBOB), oxalyldifluoroborate (LiODFB) and fluoroalkylphosphate (LiFAP), are described in detail with their appropriate synthesis procedures, possible decomposition mechanism for SEI formation and prospect of using them in future generation lithium-ion batteries. Finally, the state-of-the-art of the system is given and some interesting strategies for the future developments are illustrated.     

Nanomaterials for rechargeable lithium batteries

Energy storage is more important today than at any time in human history. Future generations of rechargeable lithium batteries are required to power portable electronic devices (cellphones, laptop computers etc.), store electricity from renewable sources, and as a vital component in new hybrid electric vehicles. To achieve the increase in energy and power density essential to meet the future challenges of energy storage, new materials chemistry, and especially new nanomaterials chemistry, is essential. We must find ways of synthesizing new nanomaterials with new properties or combinations of properties, for use as electrodes and electrolytes in lithium batteries. Herein we review some of the recent scientific advances in nanomaterials, and especially in nanostructured materials, for rechargeable lithium-ion batteries.     

Mg^2＋掺杂对锂离子正极材料Li3V2（PO4）3的影响

随着市场对锂离子电池(LIB)需求的日趋增长,对电极活性物质的要求也在朝着高能量密度、低成本、安全稳定、环境友好的方向努力,其中正极材料相对负极材料的发展较为缓慢,成为制约LIB发展的瓶颈。NASICON结构的Li3V2(PO4)3属于单斜晶系,相对金属锂具有很高的电势,理论容量高达19     

Correlation between the O 2p Orbital and Redox Reaction in LiMn0.6Fe0.4PO4 Nanowires Studied by Soft X‐ray Absorption

The changes in the electronic structure of LiMn_0.6Fe_0.4PO₄ nanowires during discharge processes were investigated by using ex situ soft X‐ray absorption spectroscopy. The Fe L ‐edge X‐ray absorption spectrum attributes the potential plateau at 3.45 V versus Li/Li⁺ of the discharge curve to a reduction of Fe³⁺ to Fe²⁺. The Mn L ‐edge X‐ray absorption spectra exhibit the Mn²⁺ multiplet structure throughout the discharge process, and the crystal‐field splitting was slightly enhanced upon full discharge. The configuration‐interaction full‐multiplet calculation for the X‐ray absorption spectra reveals that the charge‐transfer effect from O 2p to Mn 3d orbitals should be considerably small, unlike that from the O 2p to Fe 3d orbitals. Instead, the O K‐edge X‐ray absorption spectrum shows a clear spectral change during the discharge process, suggesting that the hybridization of O 2p orbitals with Fe 3d orbitals contributes essentially to the reduction.     

准固态锂离子电池正极材料柱[5]醌的研究

锂离子电池的有机正极材料由于具有比容量高、环境友好和廉价等优点,近年来成为研究的热点.但是,有机电极材料在液态电解液中的溶解流失易导致其容量迅速衰减,严重限制了它们的实际应用.本工作基于聚(甲基丙烯酸酯)/聚乙二醇的准固态电解质,考察了以柱[5]醌为正极的准固态锂二次电池的电化学性能.结果显示,柱[5]醌正极不仅保持了高容量的特性(首次放电容量410 mA h/g),并且循环寿命得到了有效提高.0.2 C下循环100周后,电极的容量保持率为88.5%,显示了柱[5]醌在高比能量准固态锂离子电池中的应用潜力.     

Carbon-Coated Single-Crystal LiMn(2) O(4) Nanoparticle Clusters as Cathode Material for High-Energy and High-Power Lithium-Ion Batteries

Electric results: The rate capability can be improved in lithium ion batteries (LIBs) by reducing the dimensions of the active material; however, the LIBs would then have insufficient electrode density. To overcome this problem, carbon-coated single-crystal LiMn(2) O(4) nanoparticle clusters were synthesized as a cathode material for LIBs; this material can be densely packed on the current collector.     

Graphene-encapsulated Fe3O4 nanoparticles with 3D laminated structure as superior anode in lithium ion batteries

Fe₃O₄–graphene composites with three‐dimensional laminated structures have been synthesised by a simple in situ hydrothermal method. From field‐emission and transmission electron microscopy results, the Fe₃O₄ nanoparticles, around 3–15 nm in size, are highly encapsulated in a graphene nanosheet matrix. The reversible Li‐cycling properties of Fe₃O₄–graphene have been evaluated by galvanostatic discharge–charge cycling, cyclic voltammetry and impedance spectroscopy. Results show that the Fe₃O₄–graphene nanocomposite with a graphene content of 38.0 wt % exhibits a stable capacity of about 650 mAh g^?1 with no noticeable fading for up to 100 cycles in the voltage range of 0.0–3.0 V. The superior performance of Fe₃O₄–graphene is clearly established by comparison of the results with those from bare Fe₃O₄. The graphene nanosheets in the composite materials could act not only as lithium storage active materials, but also as an electronically conductive matrix to improve the electrochemical performance of Fe₃O₄.     

Graphene oxide assisted facile hydrothermal synthesis of LiMn0.6Fe0.4PO4 nanoparticles as cathode material for lithium ion battery

Assisted by graphene oxide（GO）,nano-sized LiMn0.6Fe0.4PO4 with excellent electrochemical performance was prepared by a facile hydrothermal method as cathode material for lithium ion battery.SEM and TEM images indicate that the particle size of LiMn0.6Fe0.4PO4（S2）was about 80 nm in diameter.The discharge capacity of LiMn0.6Fe0.4PO4 nanoparticles was 140.3 mAh-g^1 in the first cycle.It showed that graphene oxide was able to restrict the growth of LiMn0.6Fe0.4PO4 and it in situ reduction of GO could improve the electrical conductivity of LiMn0.6Fe0.4PO4 material.     

动力锂离子电池正极材料磷酸钒锂制备方法

锂离子电池新型正极材料的开发是当前的研究热点,其中磷酸盐材料以其结构稳定、安全性能好及资源丰富等优点备受关注。磷酸钒锂理论能量密度可达500mWh/g,具有较高的电子离子导电性、理论充放电容量及充放电电压平台,被认为是一种极具竞争优势和应用前景的动力锂离子电池正极材料。传统磷酸钒锂合成方法有固相合成法、碳热还原法、溶胶凝胶法和水热合成法等,近年来,又出现了湿法固相配位法、微波固相合成法和流变相法等新型合成方法。本文简要介绍了磷酸钒锂的结构和性能特点,对磷酸钒锂制备方法的最新研究进展进行了较为全面的阐述,并详细介绍了本研究团队近年来在磷酸钒锂材料新型合成方法方面的探索成果。同时对各种合成方法的制备工艺及材料性能进行了对比分析,并探讨了当前存在的问题及未来的研究方向。     

High capacity and cycling stability of poly(diaminoanthraquinone) as an organic cathode for rechargeable lithium batteries

Poly(1,5‐diaminoanthraquinone) is synthesized by oxidative polymerization of diaminoanthraquinone monomers and investigated as an organic host for Li‐storage reaction. Benefiting from its high density of redox‐active, Li⁺‐associable benzoquinone groups attached to conducting polyaniline backbones, this polymer undergoes its cathodic reaction predominately through Li⁺‐insertion/extraction processes, delivering a very high reversible capacity of 285 mAh g^?1. In addition, the PDAQ polymer cathode exhibits an excellent rate capability (125 mAh g^?1 at 800 mA g^?1) and a considerable cyclability with a capacity retention of ～160 mAh g^?1 over 200 cycles, possibly serving as a sustainable, high capacity Li⁺ host cathode for Li‐ion batteries. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 235–238     

锂及锂离子蓄电池有机溶剂研究进展

从有机溶剂对电池安全性的影响，氧化稳定性，与负极的相容性及对电解液电导率的影响四个方面，论述了锂及锂离子蓄电池有机溶剂的化学和电化学，介绍了碳酸酯类，醚类和羧酸酯类溶剂的性质与电极的相容性及在有机电解液中的应用，对含硫，硼基及胺类有机溶剂等也作了论述。     

Bifunctional air electrodes for flexible rechargeable Zn-air batteries

Flexible rechargeable Zn-air batteries are considered as one of the most promising battery systems to drive flexible and wearable electronic devices owing to their high safety,high gravimetric energy density,low self-discharge and low cost.One of the key challenges is to develop air electrodes with high performance and high mechanical flexibility.This minireview discusses the recent progress in the design and fabrication of flexible air electrodes.It focuses on the latest innovations in bifunctional oxygen reduction reaction and oxygen evolution reaction electrocatalysts,mainly including carbon-based materials(e.g.,heteroatom-doped carbon,metal-nitrogen moieties doped carbon),metal oxides(e.g.,spinel oxides,perovskite oxides) and their composites.It aims to provide an insight into the structureproperty relationship of bifunctional catalysts.We also discuss the challenges and future perspectives.     

A feasibility study on the use of Li(4)V(3)O(8) as a high capacity cathode material for lithium-ion batteries

Li(4)V(3)O(8) materials have been prepared by chemical lithiation by Li(2)S of spherical Li(1.1)V(3)O(8) precursor materials obtained by a spray-drying technique. The over-lithiated vanadates were characterised physically by using scanning electron microscopy (SEM) and X-ray diffraction (XRD), and electrochemically using galvanostatic charge-discharge and cyclic voltammetry measurements in both the half-cell (vs. Li metal) and full-cell (vs. graphite) systems. The Li(4)V(3)O(8) materials are stable in air for up to 5 h, with almost no capacity drop for the samples stored under air. However, prolonged exposure to air will severely change the composition of the Li(4)V(3)O(8) materials, resulting in both Li(1.1)V(3)O(8) and Li(2)CO(3). The electrochemical performance of these over-lithiated vanadates was found to be very sensitive to the conductive additive (carbon black) content in the cathode. When sufficient carbon black is added, the Li(4)V(3)O(8) cathode exhibits good cycling behaviour and excellent rate capabilities, matching those of the Li(1.1)V(3)O(8) precursor material, that is, retaining an average charge capacity of 205 mAh g(-1) at 2800 mA g(-1) (8C rate; 1C rate means full charge or discharge of a battery in one hour), when cycled in the potential range of 2.0-4.0 V versus Li metal. When applied in a non-optimised full cell system (vs. graphite), the Li(4)V(3)O(8) cathode showed promising cycling behaviour, retaining a charge capacity (Li(+) extraction) above 130 mAh g(-1) beyond 50 cycles, when cycled in the voltage range of 1.6-4.0 V, at a specific current of 117 mA g(-1) (C/3 rate).