Molecular orientation in hot-drawn poly(ethylene terephthalate) films as determined from the intrinsic polarized fluorescence

The groundstate-stable dimers in the non-crystalline regions of uniaxially drawn poly(ethylene terephthalate) (PET) films were used as chain-intrinsic fluorescent labels for studying the orientation distribution in the non-crystalline regions. As far as indicated by the spectra and the fluorescence decay law, the fluorescent group remains unchanged when the sample is uniaxially oriented by drawing above the glass transition temperature. In contrary to the behaviour of physically incorporated probe molecules, the orientation coefficient f ₂ ^F of the dimers is proportional to the amorphous orientation coefficientf ₂ ^A ; concerning the fluorescence signal, amorphous includes all the material outside the perfect crystal.During deformation, the orientation coefficientf ₂ ^F follows approximately a superposition curve of crystallite-like orientation, separable in the initial range of stretching ratio <2.5, and of true-amorphous orientation of the affine network type that becomes noticably at >3.At temperatures closely aboveT _g, and within the selected range of stretching parameters, the fluorescence intensity of PET remains nearly constant with increasing stretching ratio; at >2.5, where the maximum crystallite orientation is achieved and the increase of amorphous orientation becomes noticably, a slight augmentation of the dimer concentration is observed.     

Charge carrier photogeneration in polymers

The charge carrier photogeneration in polymers can be depicted as a multistage process that involves i) photoexcitation to a neutral molecular electronic state, ii) autoionization of the excited state, iii) thermalization of the hot electron, leading to the formation of a Coulomb field-bound geminate electron-hole pair, and iv) thermal dissociation of the electron-hole pair into free carriers. This model is proposed for all types of polymers with a large ocnjugated pendant group and both the saturated and non-saturated main chain. The separation distance of the electron-hole pairs ranges from 2 to 3 nm, and the primary quantum efficiency of the electron-hole pairs formation assumes values of several tenths of charge per photon. In intrinsic materials like substituted polyacetylenes both the interchain and intrachain charge transfer excitons can be formed. Onsager's theory can provide a satisfactory explanation of the dissociation step. In polymers with the saturated main chain and large conjugated pendant groups the charge-transfer excitons are very often stabilized by self-trapping in dimer deep traps. Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday     

Effects of pressure and solvent on the diffusion of aromatic compounds through polymers

The diffusion of six azo and five anthraquinone derivatives through nylon 6, poly(ethylene terephthalate) and secondary cellulose acetate films were studied under high hydrostatic pressures of up to 3000 bar and at temperatures 80–130 °C, by analyzing the diffusion profiles yielded in a stacked multiple film, placed in the solution of the diffusant. It was found that the diffusion coefficient,D, of the diffusant decreased with increasing pressure, giving a linear relationship between InD and the pressure, the slope of which gave the activation volume for the diffusion,V . It was revealedV increased linearly with increasing intrinsic molecular volume of the diffusant,V _w , the slopes being different between the azo and the anthraquinone derivatives. The ratio ofV toV _w (V /V _w ) ranged from 0.13 to 0.93, depending in a sensitive manner on the degree of swelling of the polymer matrix which in turn was varied by the solvent. The overall results could be explained in accordance with the formulation,V _{f, local} +V =V _w , whereV _{f, local} represents the free volume contribution. It was proposed thatV _w is increased by solvation when the solvent is good for the diffusant.     

Sorption properties of celluloses in binary liquid mixtures

The adsorption capacity for methanol-benzene andn-propanol-water mixtures was measured on two kinds of microcrystalline celluloses and cotton linters. Excess adsorption isotherms were obtained; the free energy of displacement was calculated from the isotherms. The enthalpy of displacement for one crystalline cellulose was measured by flow calorimetry. The entropic function of displacement was derived from the enthalpy and free energy of displacement. The preferential adsorption of methanol andn-propanol was characterized by the adsorption equilibrium constant.On leave from the Department of Physical and Colloid Chemistry, Wageningen Agricultural University, The Netherlands     

Recent development in dielectric relaxation spectroscopy of polymers

An evaluation strategy for dielectric measurements in the frequency and/or time domain is presented which provides complete information about a relaxation mechanism (intensity, position, and shape of the relaxation function) independent of overlapping with neighboring mechanisms. As an example results on poly-(ethyleneterephthalate) are given.     

Monolayers of methacrylic polymers containing aromatic groups

Monolayers of poly-methacrylates containing either aromatic or linear side groups were studied at the air-water interface. The aim of the work is to define the role of the aromatic group in determining the interfacial distribution and orientation of these polymers. Surface pressure measurements show that all the polymers give stable expanded monomolecular films between 288 K and 308 K temperature range.Surface potential and ellipsometric measurements show that both aromatic and aliphatic polymers are in an almost horizontal conformation at the liquid-air interface. From a comparison of the experimental isotherms with Huggins' theory, it was deduced that no preferential interactions exist between benzene rings in the film. In contrast, preferential attractive energies are observed for n-alkylmethacrylates.Further information on the state of the collapsed film was obtained from electron scanning micrographs.     

Determination of the partial specific volume of conjugated proteins

Specific volume quantities of macromolecules are of importance in connection with a variety of physico-chemical and biochemical techniques, such as analytical ultracentrifugation and small-angle scattering, e.g., for the determination of molecular weights in two- and multicomponent solutions. Specific volumes may be obtained from density experiments, calculations, or reliable approximations. Experimental values for the partial specific volume (¯v) of native conjugated proteins in aqueous solution vary in a wide range (0.59-1.05 cm³/g), while the values for nonconjugated proteins cluster around 0.735 cm³/g, as follows from a thorough investigation of the relevant literature. Volumes of conjugated proteins are substantially influenced by the nature and content of the nonprotein moiety. Typical glyco-, nucleo-, and metalloproteins show ¯v- values lower than those found for nonconjugated proteins, while lipoproteins exhibit high values. The ¯v-values of conjugated proteins in dilute salt or buffer solution (0.2 M) may be assumed to be composed additively from compositional increments. Based on the composition and assumed average values for the partial specific volumes of the main constituents of conjugated proteins (¯v _a =0.54, 0.61, 0.735, and 1.02 cm³/g for the nucleic acid, carbohydrate, protein, and lipid moieties, respectively), reliable calculations can be performed if some precautions are taken into account. In this context the theoretical background will be discussed, especially with respect to ultracentrifugal experiments in multicomponent solutions.Dedicated to Professor Dr. Josef Schurz on the occasion of his 65th birthday.This paper was presented at the VI. Symposium on Analytical Ultracentrifugation, Marburg, FRG, February 16–17, 1989.     

Shear-induced deformation of polystyrene coils in dilute solution from small angle neutron scattering 2. Variation of shear gradient,molecular mass and solvent viscosity

The technique of small angle neutron scattering (SANS) has been used to study the conformation of polystyrene chains in dilute solution under a constant shear gradient. The experiments reveal a distinct anisotropy of the molecular dimensions with regard to the directions parallel and perpendicular to the flow direction on the 2D-multidetector. The deformation ratio of the single polymer chain (R ²/R _iso ² )–1 as a function of the reduced shear gradient=([] · · M _w G)/RT shows a transition from the ideal ²-behaviour for dynamic infinitely flexible coils found at small gradients, to a behaviour with smaller increase at larger. These results are qualitatively consistent with the theory of Cerf for a polymer with finite internal viscosity in a shear gradient. At low(<1), a better agreement with the model of a free-draining coil (Rouse behaviour) than with the Zimm model is observed.     

Adsorption of polar substances from binary and ternary mixtures on silica gel

The adsorption isotherms of acetone and methyl ethyl ketone from binary and ternary mixtures in benzene and n-heptane on silica gel were measured. The experimental adsorption data are discussed on the basis of changes of the composition of mixed solvent (benzene + n-heptane) in ternary mixtures. It has been found that the different structures of the surface phase correspond to the system investigated. The marked dependence of the adsorption on the solvent character is demonstrated. For benzene and ternary (ketone + benzene + n-heptane) mixtures a mixed character of the surface phase is observed whose composition is determined by competition of liquid components for silica surface as well as its tendency to complex. Bilayer model of the surface phase gives a good representation of the experimental data for binary systems benzene + ketone.     

Characterization of polymer networks by measurements of the freezing point depression

Based on the phenomenon of freezing point depression of a solvent byT, experimental evidence is presented to show that the distance between the junction points can be calculated fromT. Direct measurements of the temperature-time-curve of the cooling network and the Differential Scanning Calorimetry offer the determination ofT. Except the mean distances ¯d _c in dependence on cross-linking density, swelling degree, and other network parameters, the distribution of the distance between the junction pointsH(d_c) can be determined, which allows conclusions on the course of cross-linking reaction. This paper attempts to give experimental evidence of influences of the breadth ofH(d_c) on application-relevant properties.     

Evaluation of surfactant ion activity in micellar solutions of dodecylpyridinium chloride from partition data and counter ion activity measurements

The partition isotherm of dodecylpyridinium chloride in the water-1,2-dichloroethane system, measured over a broad concentration range, served for the evaluation of the critical micelle concentration and of the effective concentration and mean activity of the surfactant ions in the micellar concentration range. On the basis of the charged phase separation model for the micelles and EMF measurements of counter-ion activity, the surfactant cation activity and the apparent degree of counter ion association to the micelle () of 0.69 were estimated. The results indicate a gradual decrease of surfactant cation activity with increasing total concentration in the micellar range and support literature data derived from EMF measurements that apply surfactant selective plastic exchange membrane electrodes.     

Analysis of dielectric observations of KCl-charged poly(methyl methacrylate) microcapsules using a two-component model consisting of KCl-permeable and KCl-impermeable capsules

Dielectric measurements were carried out on aqueous suspensions of poly(methyl methacrylate) microcapsules charged with KCl solutions to examine the KCl permeability of the microcapsules. The specimens exhibited three kinds of dielectric relaxation. Two kinds of dielectric relaxation were observed immediately after washing the specimens with distilled water. These overlapped each other when the specimen was left standing in the measuring cell for a long time. Their relaxation frequencies were affected by the KCl concentration of the suspending medium in which the specimen was kept before washing. Another relaxation was observed distinctly when the spepcimens were washed thoroughly with distilled water. Its relaxation frequency was affected by the KCl concentration of the charged solution. These results were explained by assuming that the specimens were mixtures of KCl-permeable and KCl-impermeable capsules. The theoretical analysis procedure was devised in the light of dielectric theory of interfacial polarization to estimate the parameters which characterize the structure of the specimens.     

Polystyrene(1)/poly(butyl acrylate-methacrylic acid)(2) core-shell emulsion polymers. Part I. Synthesis and colloidal characterization

Polystyrene (PS) (1)/Poly(n-butyl acrylate (BA)-methacrylic acid (MAA)) (2) structured particle latexes were prepared by emulsion polymerization using monodisperse polystyrene latex seed (118 nm) and different BA/MAA ratios. Three main aspects have been investigated: i) the polymerization kinetics; ii) the particle morphology as a function of reaction time; iii) the distribution of MAA units between the water phase and the polymer particles.The amount of MAA in the shell copolymer was found to be the main factor controlling the particle shape and morphology. The shape of the structured particles was, generally, non-spherical, and the shape irregularities increased as a particles was, generally, non-spherical, and the shape irregularities increased as a function of reaction time. At the beginning of the second stage reaction, new small particles were observed, which coalesced onto the PS seed as the polymerization proceeded. The distribution of the MAA groups in the latex particles and the serum was analyzed by alkali/back-acid titration, using ionic exchanged latexes. No MAA groups were detected in the latex serum. Due to the lowTg of the BA-MAA copolymers, alkali conductimetric titrations accounted for all the MAA groups on and within the polymer particles. Therefore, for these systems, this method is not only limited to a thin surface layer, as it is often assumed.     

A DSC study of PVAC-PMMA two-stage emulsion polymers

Core-shell polymer colloids were produced by a two-stage emulsion polymerization technique. The polymers thus formed were investigated by means of differential scanning calorimetry (DSC). The DSC thermograms show two separate glass transition regions of the core and the shell component with positions unchanged regardless of chemical composition. Increases in specific heat capacity at the glass transition temperature of both components are lower than theoretical values calculated from the net chemical composition. From these results, it is possible to estimate i) the chemical composition of the interfacial layer and ii) the interfacial layer thickness. This interfacial layer thickness is in the order of 2–7 nm.Part 7 of Polymerizations in the Presence of Seeds     

Flocculation studies of non-aqueous poly(methyl methacrylate) dispersions. II. Stabilization with the diblock copolymer poly (styrene-b-[ethylene-co-propylene])

Well defined non-aqueous dispersions of poly(methyl methacrylate) stabilized by the diblock copolymer poly(styrene-b-[ethylene-co-propylene]) have been studied with a dispersion medium consisting of a binary liquid mixture of n-heptane and n-propanol. Flocculation was induced by adding n-propanol at constant temperature, to find the critical flocculation volume, and by cooling, to find the critical flocculation temperature. Theta conditions for ethylene-propylene copolymer in the same binary liquid mixture were determined using samples obtained by hydrogenating polyisoprene standards. These dispersions just retained stability at theta conditions, with flocculation occurring when the dispersion medium was slightly worse than a theta system for the stabilizing ethylene-propylene chains.     

Synthesis and physical behavior of polyamide 6,10-poly(butadiene-co-acrylonitrile) segmented block copolymers

Segmented copolymers, characterized by polyamide 6,10 and poly(butadieneco-acrylonitrile) random blocks, were studied. Samples of such copolymers, having different relative content of the two components, were synthesized. Films were prepared by pressure molding and studied using differential scanning calorimetry and dynamicmechanical analysis. Results indicate that a phase segregation occurs and the system can be described by a matrix model. The matrix can be polyamidic or polybutadienic, depending on sample composition, while, in the matrix, the other component is organized in segregated domains.     

Small-angle x-ray scattering by crystalline polymer fibers 2. Investigation of the linear paracrystalline model using various materials

The linear position-sensitive detector is well-suited to measure quantitatively the distribution parallel to the fibre axis of the intensity of small-angle x-ray scattering (SAXS) by polymer fibres, except that in the case of four-point patterns their width is greater than that of the detector window. A method is described which overcomes this problem, and which has high angular resolution. Using this method, the variation of scattered intensity with angles from 0.3° to 2.5° has been measured for fibres of poly(ethylene terephthalate), nylon, and low density poly(ethylene) (LDPE), and compared with that predicted by the linear paracrystalline model. In all cases except LDPE, when the distribution of phase lengths was given by the Reinhold function, there was no significant disagreement between the measured and predicted scattering except for a very small range of angles on the low angle side of the peak intensity. With LDPE small but significant discrepancies were found at other angles as well, and these were worse if the symmetrical Gaussian distribution function was used. The method enabled quantitative parameters describing the morphology to be obtained. It is concluded that the morphology of the linear paracrystalline stack is consistent with the SAXS intensity distribution, and that the Reinhold function is a reasonable approximation to the distribution of phase lengths. A small modification so that this decays more rapidly at long lengths might be necessary to explain the scattering for all materials over the entire angular range and other small changes might be needed with LDPE, although the asymmetrical nature of the distribution must be retained.On leave from Department of Physics, University of Technology Malaysia, 81300 Sekudai, Malaysia.     

Swelling of poly(methacrylic acid) gels and adsorption of L-lysine and its polymer on the gels

Poly (methacrylic acid) gels (PMAA gels) of various degrees of crosslinking were prepared and the dissociation behavior of these gels was examined; the swelling behavior was investigated as a function of the solution pH values. A reentrant phenomenon of swelling was observed and interpreted based on the Flory-Huggins equation and the Donnan equilibrium formula. Moreover, adsorption of L-lysine, oligo(L-lysine)s (Lys-n,n=3, 9, and 19) and poly(L-lysine) onto PMAA gels from aqueous solutions was investigated under different conditions of pH and concentration of adsorbate. The adsorption ratio of L-lysine onto PMAA gel is dependent on both the pH of solution and the degree of crosslinking. In a pH range between 8 and 9, the protonated form of L-lysine is strongly adsorbed on the PMAA gel by electrostatic interactions. Oligomers and polymer of L-lysine are adsorbed in a somewhat different way from the monomeric L-lysine. In addition, the desorption behavior of L-lysine from PMAA gels by a change in pH was also investigated.     

Small-angle neutron scattering of colloidal silica dispersions in a non-polar solvent

Small-angle neutron scattering studies were performed on dilute dispersions of colloidal silica spheres in mixtures of h₁₂- and d₁₂-cyclohexane. The particles consisted of a SiO₂-core and a layer of stearyl alcohol molecules terminally attached with a chemical bond (Si-O) to the particle surface. The contrast variation method was applied to reveal the internal structure of the particles. The matchpoints determined with this method were in accordance with those calculated from the mass density of the particles and the atomic composition, as determined with elemental analysis.For a detailed interpretation of the scattering curves, we assumed that the particles were spherosymmetrical and consisted of two concentric layers. With the relation we derived between the radius of gyration and the reciprocal contrast for such a model, it was possible to determine all the parameters characterizing the particle in terms of this model. The model calculations performed using these parameters fitted very well to the experimental intensities for high contrasts. For lower contrasts, the fit was somewhat less good. This is probably due to random fluctuations in the scattering length density within the particle core.The different radii as found by neutron scattering, agreed very well with those determined using other techniques, such as light scattering (static and dynamic) and electron microscopy.     

The molecular weight dependence of intrinsic viscosity of rod-like micelles of dodecyldimethylammonium chloride

It is shown that the non-linear logarithmic dependence of the intrinsic viscosity on the molecular weight for rod-like micelles of dodecyldimethylammonium chloride (as reported by Ozeki and Ikeda [1]) can be interpreted in terms of the Yamakawa-Fujii theory of worm-like chains. Characteristic parameters of the micelles are estimated: persistence length (a=14 nm), linear mass density (M _L=4800 nm^–1), diameter (d=3 nm), molecular pitch (b=0.052), and the number of surfactant chains in a layer of rod-like micellen=12. The results are compared with those derived from light-scattering measurements.